Plastic Tubes

The continuous busbar heat shrinkable sleeve is made of environmental friendly polyolefin heat shrinkable material cross-linked by high-energy electron beam bombardment. It is suitable for anti-corrosion and insulation protection of busbar and electrical equipment, electrical insulation, mechanical protection, reducing phase spacing and making joint box. Application field: electric power industry. Product features ■ shrinkage ratio: 2:1 (1kV, 35kV), 2.5:1 (10kV busbar) ■ Shrinkage temperature: 84 ℃～ 125 ℃ ■ Working temperature: - 40 ℃ ~ 125 ℃ ■ Environmental protection, high strength, good elasticity, flame retardant and soft ■ Color standard: iron red, yellow, green and black

Minimum Order: 1 bags

The continuous busbar heat shrinkable sleeve is made of environmental friendly polyolefin heat shrinkable material cross-linked by high-energy electron beam bombardment. It is suitable for anti-corrosion and insulation protection of busbar and electrical equipment, electrical insulation, mechanical protection, reducing phase spacing and making joint box. Application field: electric power industry. Product features ■ shrinkage ratio: 2:1 (1kV, 35kV), 2.5:1 (10kV busbar) ■ Shrinkage temperature: 84 ℃～ 125 ℃ ■ Working temperature: - 40 ℃ ~ 125 ℃ ■ Environmental protection, high strength, good elasticity, flame retardant and soft

Minimum Order: 1 bags

The continuous busbar protection heat shrinkable sleeve is made of environmental friendly polyclinic heat shrinkable material which is bombarded by high energy electron beam. It is suitable for the corrosion protection and insulation protection of bus and electrical equipment. The electric insulation, mechanical protection, phase spacing reduction, joint box application field: electric industry. Product features ■ shrinkage ratio: 2:1 (1kV, 35kV), 2.5:1 (10kV bus bar) ■ shrinkage temperature: 84 ℃ ~ 125 ℃ ■ operating temperature: - 40 ℃ ~ 125 ℃ ■ environmental protection, high strength, good elasticity, flame retardant and soft ■ color standard: iron red, yellow, green, black

Minimum Order: 1 bags

100

Description: the polyurethane elastomeric is a new material of polymer synthetic between rubber and plastic. It has both high strength of plastic and high elasticity of rubber. Its characteristics are: 1, a wide range of hardness. It still has rubber elongation and resilience at high hardness. The polyurethane elastomeric has a hardness range of Shore A10-D80. 2. high strength. At rubber hardness, the tensile strength, tear strength and load carrying capacity are much higher than general rubber material. At high hardness, its impact strength and flexural strength are much higher than plastic material. 3, wear-resistant. Its wear resistance is very outstanding, generally in the range of 0.01-0.10cm3/1.61km, about 3-5 times than rubber material. 4, oil resistant. The polyurethane elastomeric is a highly polar polymer compound which has low affinity with non-polar mineral oil and is hardly eroded in fuel oil and mechanical oil. 5, good resistance to oxygen and ozone. 6, excellent vibration absorption performance, can do damping and buffering. In the mold manufacturing industry, it replaces rubber and springs.7, has good low temperature performance. 8, radiation resistance. Polyurethane is highly resistant to high energy radiation and has satisfactory performance at 10-10 deg radiation dose. 9, with good machining performance. The polyurethane tube, pu tube are made by full sets moulds or extrude machine with high quality polyester, polyether or TPU. It is very good performance of chemic erode resistant, impregnant resistant, ozone resistant, radiation resistant, aging resistant, hydrolyze resistant, and high tensile strength, tear resistant, high impact resistant, high bend strength and low compression set etc. The abrasion resistant is 5 multiple more than pure natural rubber, and the oil resistant is 3-5 multiple more than NBR rubber, and have high elasticity 65% with prominent compression resistant at high temperature. Wider revise hardness range on 80-95Shore A, very good viscidity with metal material, it is a new macromolecule material with fast evolutive now. Apply to military, mine, oil field, chemical, printing, punch, paper making, spin, auto industrial etc. Specifications: mat , erial: virgin CPU or TPU of polyester or polyether color: clear yellow, transparent, orange, red, blue, black etc. surface: smooth/smooth tensile strength: 25-50Mpa elasticity impact: >25% hardness: 80-95shore A elongation: 400%-600% density: 1.15-1.25g/cm3 tear strength: 35-155KN/m akron abrasion loss:<0.05cm3/1.61km compression set (22h*70°C):<10% working temperature: 120°C standard size: Ø2mm x Ø4mm x 200m Ø3mm x Ø5mm x 200m Ø4mm x Ø6mm x 200m Ø5mm x Ø8mm x 200m Ø6mm x Ø9mm x 200m Ø7mm x Ø10mm x 100m Ø8mm x Ø12mm x 100m Ø9mm x Ø12mm x 100m Ø10mm x Ø14mm x 50m Ø12mm x Ø16mm x 50m Ø14mm x Ø18mm x 50m Ø16mm x Ø20mm x 50m Ø8mm x Ø20mm x 400mm Ø8mm x Ø25mm x 400mm Ø8mm x Ø30mm x 400mm Ø8mm x Ø35mm x 400mm Ø8mm x Ø40mm x 400mm Ø8mm x Ø45mm x 400mm Ø8mm x Ø50mm x 400mm Ø8mm x Ø55mm x 400mm Ø8mm x Ø60mm x 400mm OEM & customized size are agreed packing in bags, pallets or crates ***when you enquiry, pls confirm color, hardness, size and quantity***

Minimum Order: 100

Silicone Hose, Silicone Tube, Silicone Sleeve Description: the silicone hose, silicone tube, silicone sleeve are extruded or moulded by special silicone extruding machine or moulded machine with high quality silicone material under full sets mould of different inside diameter and outside diameter according to the request from buyers, high tensile strength, flexibility strong anti-pull and wider revise hardness range with good aging resistant, ozone resistant, heat resistant, insulation property, fuel oil resistance and lube resistance, working in the air, water or oil medium at the temperature of -60°C - +250°C. industrial grade silicone hose is made with standard extrude silicone and vulcanized with import peroxide without smell; food grade silicone hose is made with food grade transparent fumed silicone, platinum vulcanized, nonpoisonous and tasteless; medical grade silicone hose is made with medical grade transparent fumed silicone, platinum vulcanized with FDA and LFGB certificate. Apply to corona roller or transfer water, air, oil and other medium etc. Specifications: materia , l: 100% virgin silicone material quality: industrial grade, food grade under postcured or platinum cured color: transparent, translucent, dark red, orange, black, milk white, blue, grey etc. surface: smooth/smooth fiber reinforced: insert 1-5PLY polyester fiber tensile strength: 7.5-9.8Mpa hardness: 50, 60, 70, 80+/-5shore A elongation: 350-720% density: 1.25+/-0.05g/cm3 tear strength: 26-42N/mm working temperature: -60°C - +250°C wall thickness: 1.0, 2.0, 3.0, 4.0, 5.0mm standard size: Ø0.5mm x Ø1.0mm x 5-20kgs Ø0.5mm x Ø1.5mm x 5-20kgs Ø0.5mm x Ø2.0mm x 5-20kgs Ø0.8mm x Ø1.9mm x 5-20kgs Ø1.0mm x Ø2.0mm x 5-20kgs Ø1.0mm x Ø3.0mm x 5-20kgs Ø1.0mm x Ø4.0mm x 5-20kgs Ø1.5mm x Ø2.5mm x 5-20kgs Ø1.5mm x Ø3.0mm x 5-20kgs Ø1.6mm x Ø3.2mm x 5-20kgs Ø2.0mm x Ø3.0mm x 5-20kgs Ø2.0mm x Ø4.0mm x 5-20kgs Ø2.0mm x Ø5.0mm x 5-20kgs Ø2.0mm x Ø6.0mm x 5-20kgs Ø3.0mm x Ø4.0mm x 5-20kgs Ø3.0mm x Ø5.0mm x 5-20kgs Ø3.0mm x Ø6.0mm x 5-20kgs Ø3.0mm x Ø8.0mm x 5-20kgs Ø3.0mm x Ø9.0mm x 5-20kgs Ø4.0mm x Ø5.0mm x 5-20kgs Ø4.0mm x Ø6.0mm x 5-20kgs Ø4.0mm x Ø7.0mm x 5-20kgs Ø4.0mm x Ø8.0mm x 5-20kgs Ø5.0mm x Ø8.0mm x 5-20kgs Ø5.0mm x Ø9.0mm x 5-20kgs Ø5.0mm x Ø10.0mm x 5-20kgs Ø6.0mm x Ø9.0mm x 5-20kgs Ø6.0mm x Ø10.0mm x 5-20kgs Ø6.0mm x Ø12.0mm x 5-20kgs Ø7.0mm x Ø9.0mm x 5-20kgs Ø7.0mm x Ø10.0mm x 5-20kgs Ø7.0mm x Ø12.0mm x 5-20kgs Ø8.0mm x Ø10.0mm x 5-20kgs Ø8.0mm x Ø12.0mm x 5-20kgs Ø8.0mm x Ø14.0mm x 5-20kgs Ø9.0mm x Ø12.0mm x 5-20kgs Ø9.0mm x Ø14.0mm x 5-20kgs Ø9.0mm x Ø16.0mm x 5-20kgs Ø10.0mm x Ø14.0mm x 5-20kgs Ø10.0mm x Ø16.0mm x 5-20kgs Ø10.0mm x Ø18.0mm x 5-20kgs Ø12.0mm x Ø16.0mm x 5-20kgs Ø12.0mm x Ø18.0mm x 5-20kgs Ø12.0mm x Ø20.0mm x 5-20kgs Ø14.0mm x Ø18.0mm x 5-20kgs Ø14.0mm x Ø20.0mm x 5-20kgs Ø14.0mm x Ø22.0mm x 5-20kgs Ø16.0mm x Ø18.0mm x 5-20kgs Ø16.0mm x Ø20.0mm x 5-20kgs Ø20.0mm x Ø30.0mm x 5-20kgs Ø30.0mm x Ø40.0mm x 5-20kgs Ø40.0mm x Ø50.0mm x 5-20kgs OEM & customized size are agreed packing in rolls, bags, cartons, pallets or crates

Minimum Order: 1 bags