Plastic Products

Steel Wire Reinforced Stainless Steel Medium Corrugated PTFE Flexible Hose Products Description: Application: Medium corrugated PTFE steel braided hose with spiral steel wire Convoflex® series, the middle spiral steel wire surrounds the corrugated PTFE hose, which can effectively prevent deflating and enhance the resistance to negative pressure at high temperature. Food and pharmaceutical grade material, high flow design, easy to drain and clean inside, high and low temperature resistance, strong corrosion resistance, thickened PTFE to make anti-permeability, extended service life, can be used for transporting a variety of chemical liquids. Suitable for flanging PTFE to the sealing surface of the joint to achieve full PTFE fluid contact surface, preventing the risk of corrosion of materials to substances other than PTFE. Inner layer: Black conductive PTFE materials. Cover: 304SS stainless steel braided. Temperature: -60°C ~ +260°C Approved: Materials approved with FDA, Phthalate free, USP Class Vi. Corrugated PTFE Flexible Hose Steel Wire Reinforced Stainless Steel Medium 0

Product Description: Nylon Engineering Plastic is a PA6 bar, PA6 rod, PA6 tube and nylon plastic bar of high-performance and superior quality. With excellent electrical properties, it offers good insulation and high heat resistance. It also has a good mechanical strength, a relatively low density of 1.14-1.17g/cm3, a high flexural modulus of 1.7-2.2Gpa, and a smooth surface finish. It is available in white, black, and custom colors, and all products meet the ISO9001, Reach, and RoHS certifications. Nylon Engineering Plastic is widely used in the automotive, electronic, electrical, and mechanical industries due to its superior performance and long-term durability. Technical Parameters: Property PA6 Rod/Plate/Round Bar Elongation 200-400% Tensile Strength 25-35MPa Electrical Properties Good Abrasion Resistance Good Delivery Time 7-10 Days Heat Deflection Temperature 90-120℃ Melting Point 215-220℃ Flexural Modulus 1.7-2.2Gpa Certification ISO9001, Reach, Rohs Water Absorption 0.2-0.4% Applications: Nylon engineering plastic, a PA6 Polyamide 6 bar, plate and other products made of Nylon engineering plastic, is an ideal material to replace metal or other polymers due to its high strength, light weight and good chemical properties. Makewell's PA6 bar, plate and other products are certified with ISO9001, Rohs, Reach, and the minimum order quantity is 10 kg. The price ranges from $18 to $30, and the packaging details can be either carton or pallet. Makewell promises a fast delivery of 7-10 days and accepts payment by T/T. The monthly supply capacity reaches up to 1,000,000 kg. The flexural modulus is between 1.7 and 2.2Gpa, the melting point is from 215 to 220℃, the elongation is between 200 and 400%, and the flammability meets the UL94V-2 standard. The surface of the PA6 bar and plate can be dyed to any color, such as white, black or custom color. Nylon engineering plastic has been widely used in automotive parts, electrical products, household products, industrial machinery, medical equipment, sporting goods, and other areas. The PA6 bar and plate are used to make high-precision parts, such as gear, shaft, bearing, bearing seat, slide block, guide rail, guide roller, support, pulley, fan, impeller, etc. The Nylon engineering plastic has excellent performance in wear resistance, impact resistance, fatigue resistance, corrosion resistance, radiation resistance, self-lubrication, electrical insulation and other aspects. Customization: Nylon Engineering Plastic custom service by Makewell Brand Name: Makewell Model Number: Extrusion and casting Place of Origin: China Certification: ISO9001, Reach, Rohs Minimum Order Quantity: 10 kg Price: $18-$30 Packaging Details: Carton or pallet Delivery Time: 7-10 days Payment Terms: T/T Supply Ability: 1000000kg/month Packing: Carton or Pallet Electrical Properties: Good Color: White/Black/ Custom Color Heat Deflection Temperature: 90-120℃ Our Nylon Engineering Plastic has special features including PA6 board, Nylon plate, PA6 round bar, Nylon rod. Support and Services: Nylon Engineering Plastic Technical Support and Services include but are not limited to: Product selection assistance Design and manufacturing advice Material testing and analysis Troubleshooting and support Custom fabrication and machining On-site installation and maintenance Packing and Shipping: Packaging and Shipping Nylon Engineering Plastic is typically packed in corrugated boxes or plastic bags. To ensure the product is delivered safely, extra care must be taken when handling and packing the product. Appropriate cushioning material, such as foam or bubble wrap, must be used to prevent any damage during transit. The product can also be shipped via air, land, or sea and should be marked with the appropriate shipping labels. Any additional instructions must be clearly indicated on the packaging.

The end cap (END CAPS), also known as the end cap or blind cap oil seal, is mainly used for the gearbox and reducer body to prevent dust and dirt from invading the moving parts. Product Name: Rubber Oil Seal Brand Name: SBT Material: NBR OEM: OEM Service Provided Colour: Black，Blue，Brown Delivery time: 7-10 Days Structure: TC Function: Sealing Effect Size: 47*13 Temperature: -20 ~ 120 (NBR) -20 ~260 (FKM)   NBR Rubber Industrial Oil Seal Product advantage: 1. we have our own product brand -SBT, high quality oil seal. 2..Innovative groove ring design; 3.Optimized sealing edge; 4.Resistance to extrusion; 5.None leakage; 6.Long cycle life

Product Description In-line IV filters are commonly used in infusion administration of pediatric patients and adult patients who need critical care. As a type of IV consumables, the main purpose of the single-use filter device is to filter and retain contaminants such as undissolved drug particles; precipitates; bacteria; endotoxins; fragments of glass, plastic, or rubber; and large lipids in intravenous (IV) drug solutions. Another crucial benefits is elimination of air from reaching the systemic circulation to cause potential catastrophic effects in this patient population. IV filter is an essential component of modern intravenous therapy and play a vital role in protecting patients from serious infections and complications. In-line IV Filters from XINNA, regardless of shapes and colors, consist of three parts ------ naturally hydrophilic PES membrane as the main filter media for filtration of intravenous drugs, inherently hydrophobic PTFE membrane for air and bubble removing, and medical grade housing made of premium ABS material. And these nonsterile filters are available in the following specifications, Inline IV filters Item No. Details GL00-026-500-Z0NY 5 μm Φ26mm filter diameter GLBC-026-500-Z0NY 5 μm Φ26mm filter diameter light-proof GL00-026-120-Z0YY 1.2 μm Φ26mm filter diameter with protective edging GL00-026-500-Z0YY 5 μm Φ26mm filter diameter with protective edging GL00-020-500-Z0YY 5 μm Φ20mm filter diameter GL0L-033-500-F0YY 5 μm single-layer PES membrane rectangular housing GL0L-033-022-X0YY 0.22 μm double-layer PES membrane rectangular housing Features & Benefits Auto-stop filter Easy to connect to IV tubing sets with standard luer inlet and outlet slip High retention efficiency High throughput High flow rate Low level of extractables Automatic air venting Automatic air-stop Protecting patients from infusion pain and potentially life-threatening impurities. Packing and Shipping In-Line IV Filters from XINNA are packaged and shipped in a way that will preserve its best quality and use, The filters are placed in a sealed plastic bag to protect it from moisture, 1000pcs/pack. The filters are then securely packaged in a cardboard box with appropriate cushioning materials, 4000pcs/carton. The packaging are clearly marked with the words “In-Line IV Filter” , specifications, quantity and weight.

Features Of 2SD1590 High power handling capability: The 2SD1590 is a power triode that can handle high power up to 150W, making it suitable for use in high-power applications. High voltage rating: This triode has a high voltage rating of 1500V, making it suitable for use in high voltage applications. Low saturation voltage: The 2SD1590 has a low saturation voltage of 1.5V to 2.5V, which reduces power dissipation and improves efficiency. Fast switching speed: This triode has a fast switching speed, which means it can respond quickly to changes in voltage and current. Avalanche ruggedness: The 2SD1590 is avalanche rugged, meaning it can withstand high-energy spikes without damage to the component. RoHS compliant: This power triode is RoHS compliant, meaning it is free of hazardous materials and safe for the environment. Small form factor: With a small form factor of 30mm x 3.7mm, this triode is ideal for applications where space is limited. Wide temperature range: The 2SD1590 can operate in a wide temperature range from -55°C to +150°C, making it suitable for use in harsh environments. High reliability: This power triode has a high reliability rating and is designed for long-term use in various applications. As one of electronic parts suppliers, we can offer sorts of related products for sale, if you are interested, please contact us.

You can contact me at any time if you need high quality and low price factory supply. My contact information is Wickr:adarose Threema ID:28R739U8 WhatsApp/Telegram:+8613722791040 Email:ada@sxboaoke.com

You can contact me at any time if you need high quality and low price factory supply. My contact information is Wickr:adarose Threema ID:28R739U8 WhatsApp/Telegram:+8613722791040 Email:ada@sxboaoke.com

The dredging rubber hoses are suitable for dredging sand & slurry. It is normally installed between the HDPE dredging pipes to ensure the whole pipelines more flexible. SINCO Pipe could supply dredging rubber hoses ranging from 100mm inner diameter to 900mm inner diameter with various length and pressure ratings. Dredging Rubber Hose Advantages The dredging rubber hose is suitable for dredging engineering projects .It is consist out of an inner lining which can be adjusted to meet the specific requirement of the transported medium. Wear indicator layers can also be implemented in the lining of the hoses which transport abrasive medium. A proven textile reinforcement of high tensile strength controls the pressure resistance of the hose as well as its tensile strength. Whereas the outer cover is built up utilizing a rubber compound formulated to be highly resistant against weathering, UV light and ozone attack. On special request the outer cover can be built utilizing oil resistant materials. Hose end fittings are available in a wide range of designs specifically produced to match the selected hose service requirements. The dredging rubber hose main features as follows:   1. Dredging rubber hose outer cover with excellent aging resistance and corrosion resistance. 2. Dredging rubber hose inner cover with excellent abrasion resistance and high quality. 3. Wearing colored indicator layer. 4. Bending angle in working condition is from 0-45. 5. Low centre of gravity, strong ability of the anti-wave and good stability.

HDPE Dredging Pipe floaters/Floats are made of rotationally molded polyethylene with UV inhibitors to prevent degradation of the floats over time. SINCO HDPE Dredging pipe and floats are perfect solutions for dredging works, dewatering, pumping and other industrial projects. The dredge pipe floats are designed to be supplied with SINCO HDPE dredging pipes floats and flexible rubber hoses, which provide sufficient buoyancy to keep SINCO HDPE dredge pipes floating above the water level. HDPE dredging pipe floaters/floats are usually made in yellow color as a warning sign to other vessels in the vicinity. Other colors can be made upon request. HDPE Dredging Pipe Floaters/floats Features: • HDPE dredging pipe floaters/floats are usually made in yellow color as a warning sign to other vessels in the vicinity. Other colors can be made upon request. • To ensure long-term outdoor use, UV stabilizers must be added during manufacture to ensure good UV stability of the dredge pipe floats. • HDPE dredging pipe floaters/floats consist of two halves, the inner diameter of the pipe float is the same as (or slightly smaller than) the outer diameter of the HDPE dredging pipe so that the dredging pipe float can be firmly fixed to the dredging pipe without sliding. • The two halves of the pipe float connected by bolts/nuts made of galvanized steel (or stainless steel, if required). • The polyethylene used in the manufacturing process is fully recyclable (environmentally friendly), is fully compatible with the marine environment and has a high UV resistance. • HDPE dredging pipe floaters can absorb or reduce the energy generated by ship collisions and protect the dredging pipes they support. Double-reinforced bolts/nuts on each floater ensure a secure connection to the pipe. • SINCO HDPE dredging pipe floaters is the ideal solution and a necessity for modern dredging work projects.

HDPE Dredging Pipe with non-toxic, odorless, good heat and cold resistance. The pipe is made by PE100 high density polyethylene materials. HDPE dredge pipes are widely used for dredging industries, dredger pipelines, sand pumping pipelines, etc. HDPE Dredging pipe is high rigidity and toughness with high mechanical strength. It has ultra-high resistance, abrasion degree is 4-8 times of steel pipes, useful life can reach more than 5 years. It can withstand the impact of wind and waves on the sea, With good performance, high chemical stability, it can withstand various corrosive media (acid, alkali, salt, etc.) within a certain temperature and concentration range. HDPE dredging pips are manufactured and welded from two HDPE flange adapters and two steel flanges where the two pipes can be easily joined together by flanges and covered with floats to keep them afloat. SINCO HDPE Dredging Pipes are usually produce in 12 meters lenghts. The pipe can be provided from OD110mm to OD1400mm. with various wall thickness as per different SDR & designed pressure rating, and custom-made steel backing rings are available. HDPE Dredging Pipe Applications 1. HDPE Dredging Pipe could be used for transferring powder and coal ash in thermal power plant. 2. HDPE dredging pipe is suitable for delivering mine tailings and slurry, metallurgical mines in the mining industry. 3. HDPE dredging pipe can use for delivering pulverized coal and coal-water slurry of coal preparation plant in the coal industry. 4.Delivering mud and corrosive media with slag in the chemical industry. 5. Delivering crude oil and petroleum. 6. HDPE dredging pipe could be used for delivering sand\mud\slurry for dredger in dredging projects or sand suction projects, and also for seawater treatment projects.

HDPE gas pipe is suitable for outdoor gas transportation and distribution and is the preferred system for underground natural gas and liquefied petroleum gas mains. Sinco HDPE gas pipes are made from either PE80 or PE100 raw materials, which are sourced from world-leading suppliers of raw materials. The raw materials used in the production of HDPE gas pipes are carefully selected to ensure the highest quality and consistency. The gas pipeline is one of the most important components of the pipeline network in a city. The gas itself has certain dangers. If there is a leakage, it is easy to cause great harm, so the safety of HDPE gas pipes is very important. The replacement of the pipe network is also a very troublesome project. Excellent HDPE gas pipes have a service life of 2-3 times that of traditional pipes, up to 50 years. They have good properties, low installation costs and strong safety, so HDPE pipes are ideal used for gas transmission. HDPE Gas Pipe Application HDPE gas pipe is suitable for the gas conveying system which operating temperature range from -20℃-40℃and long time working pressure no more than 0.7Mpa. HDPE Gas Pipe Shipment HDPE Gas pipes are usually shipped by containers, pipes could be telescoped to minimize ocean freigth in terms of several sizes. Bulk shipment are also available. Sinco has its own logistics staffs with rich experiences in cargo packing & shipment. We can arrange the most reasonable shipping solutions for you to save shipping cost.

Standard: ISO4427-2-2019, AS/NZS4130-2018, EN12201-2, ASTM F714-13 etc Sizes: DN16-1400mm Length: 5.8meters or 11.8meters for straight Pipes 50 meters or 100meters coiled length(DN16-DN110) Raw Materials: PE80, PE100, PE4710. Color: Black with blue stripes or as per clients requirements Sinco HDPE pipe is a perfect solution for municipal engineering system and urban water supply and drainage system. HDPE water supply pipes are manufactured from high density polyethylene containing only those antioxidants, UV stabilizers and pigments necessary for the manufacture of pipes. HDPE Pipes are intended to be used for water supply including the conveyance of raw water prior to treatment and that of water for general purposes. Sinco Pipe could manufacture complete series of HDPE water supply pipes range from DN16mm-DN1400mm. The pipes are strictly conform to standards like ISO4427- 2-2019, AS/NZS4130-2018, EN12201-2, ASTM F714-13 etc. HDPE Water Supply Pipes Advantages Sinco HDPE pipe are commonly used for water supply applications because of their many advantages. Here are some of the benefits of using HDPE water supply pipes: 1- Non-toxic: no heavy metal additives, would not be covered with dirt or contaminated by bacterium. Sanitary. No Secondary pollution. 2- Corrosion Resistance: unaffected by chemical matters and electron chemical matters which cause corrosion in metals. 3 High flow capacity: smooth interior walls and low abrasion resistance result low flow resistance and high flow capacity. 4-Excellent Flexibility: can be supplied in coil form, fewer fittings required and lower cost in installation. 5-High impact and breakage resistance. 6- Excellent UV resistance. 7- Differential Settlement Resistance: low requirements for foundation treatment. 8- Easy Installation: light weight, easy to transport and handle friendly. PE pipes could be coiled for small diameters to reduce fittings usage. PE pipe may bend and reduce construction difficulty. 9- Long Service Life: PE water pipe can work for more than 50 years under proper use. 10-Use trenchless technology. 11- Various Joint Availability: socket fusion joint, butt fusion joint, electro fusion joint and transition joint. https://www.sincopipe.com/

Lockable Pallet Storage Cage Woven Wire Mesh Inter Stackable The metal stillage has a pallet size base and rear/ front-hinged gates combined with a powder coated sheet metal as a cage floor. Further, it is easy to move and store these stillage cages in stacks. Not to miss is that the metal stillage cage is highly functional, robust, and economical. The collapsible pallet cage mainly adopts woven wire mesh as the main body and slightly reduces the weight. Stackable metal storage stillage is suitable for the loading,handing,and storage of automobile parts,castings. Advantage: 1.Half gate and removable gate to long dimensions for full access into the cage. 2.Fully collapsible to save space when not in use. 3.Stackable up to four high. 4.Easy to handle and stack. 5.Inter-stackable. 6.Available in standard and special sizes manufactured to suit individual customer needs.

Product features: It is formed in one body, not easy to leak, tough texture, high product accuracy, clean and beautiful water tank, beautiful appearance, not easy to dirty, can easily remove dirt. Collision resistance, impact resistance, good heat and freeze resistance, can be used in the environment of minus 40 degrees Celsius to 60 degrees Celsius, UV resistance, not easy to embrittlement, tasteless, good acid and alkali resistance, convenient installation and transportation, simple use, can be used for a long time. Colors can be customized according to customer needs.

Minimum Order: 100