Cargo & Storage Equipment

Ⅰ. ABS Injection Molding Processing Performance (1) Because of the strong moisture absorption as well as high water content of ABS, the plastic parts that are made of ABS have low gloss and poor internal quality. As a result, ABS injection molding should be dried so that the water content is not more than 0.3%. (2) ABS melt has obvious non-Newtonian properties. Increasing the molding pressure can significantly reduce the melt viscosity, and its viscosity will also decrease with the increase of temperature. (3) ABS has a small molding shrinkage rate, and the shrinkage rate changes in the range of 0.3% to 0.8%, so the precision of plastic parts is high. (4) ABS injection molding has good processing performance, and there are no special requirements for injection molding machines. Both general screw and plunger injection molding machines can be used, but multi-purpose screw injection molding machines have better product quality. (5) In order to improve the quality, dimensional stability, surface gloss of plastic parts and eliminate residual internal stress when using screw injection mold tooling machine, it is more appropriate to control the injection volume at about 50% of the maximum injection volume. (6) The viscosity of ABS melt is medium, better than PC and PVC, but worse than PS, so it is better to use straight-through nozzle. (7) The main channel of the ABS mold is preferably conical, and the main channel should be short, generally about 50mm, and the longest should not exceed 100mm. (8) The cross-sectional area of the runner must be large enough so that the molten material can fill the cavity before the runner solidifies and compact in the mold. The diameter of the section should generally be greater than 5mm, but not more than 10mm. (9) The ejection force of the ejection mechanism of ABS should not be too large, otherwise the surface of the plastic part is prone to whitening. (10) Although the shrinkage rate of ABS injection china plastic moulding is small, it is easy to generate internal stress, so the plastic parts generally need to be heat treated, and the plastic parts can be treated in hot air at 70 ° C for 2 to 4 hours. Ⅱ. Conditions for ABS injection molding temperature (1) Barrel temperature ABS is an amorphous plastic with no obvious melting point, and the melt flow temperature is not too high. It has sufficient fluidity above 160 °C, but if the temperature is too high, it will not increase the fluidity. There are many varieties of ABS, and the barrel temperature of different varieties is different. The barrel temperature of general ABS is 180~230℃, the temperature of heat-resistant ABS is 190~240℃, and the temperature of flame retardant ABS is 170~220℃. The nozzle temperature is 20~30℃ lower than the barrel temperature. (2) Mold temperature The level of mold temperature has a great influence on the quality of plastic parts. During ABS injection molding, the mold temperature should be controlled within the allowable range. Generally, the mold temperature should be controlled at 50-70 °C. (3) Injection pressure The size of the injection pressure mainly depends on the structure and wall thickness of the plastic part. Usually, the injection pressure of general ABS is 50-70MPa, the injection pressure of heat-resistant ABS is 60-85MPa, and the injection pressure of flame-retardant ABS is 60-100MPa. If the flow resistance during filling is large, use a higher injection pressure. Conversely, use a lower injection pressure.

Our SVM Exports Cissus quadrangularis is a perennial plant of the grape family. It is also commonly known as Veldt Grape, Devil's Backbone, Asthisamharaka and Hadjod. Cissus quadrangularis is a succulent vine from Africa and Asia. It is one of the most commonly used medicinal plants in Thailand, and is also used in traditional African and Ayurvedic medicine. All parts of the plant are used for medicine. Cissus quadrangularis is used for obesity, diabetes, a cluster of heart disease risk factors called “metabolic syndrome,” and high cholesterol. It has also been used for bone fractures, weak bones (osteoporosis), scurvy, cancer, upset stomach,hemorrhoids, peptic ulcer disease (PUD), painful menstrual periods, asthma,malaria, and pain. Cissus quadrangularis is also used in bodybuilding supplementsas an alternative to anabolic steroids. Botanical Name: Cissus Quadrangularis

Minimum Order: 25

The epidemic accelerated technological change into the era of Industry 4.0, and high-tech electronics industry manufacturers will be under continuous pressure to innovate and manage advanced production equipment in factories through smarter ways to further optimize maintenance management efficiency. This raises the bar for third-party software systems. How to Select the Best IT Asset Management Tracking Software for Your Business Needs? Are you struggling to manage your IT assets effectively? Do you need a comprehensive solution to track and manage your IT equipment and software? Look no further than EAMic®, a leading provider of IT asset management software. EAMic® offers powerful and user-friendly IT equipment inventory system that helps businesses to optimize the value of their IT assets while reducing costs and risks. With EAMic®'s software, you can track and manage all your IT assets, including hardware, software, and networks, from acquisition to disposal. But how do you select the best IT asset maintenance software for your business needs? Here are some key factors to consider: Functionality: Look for a software solution that offers the features and functionality that meet your organization's needs. EAMic®'s IT asset management software offers customizable workflows, user-friendly interfaces, and powerful reporting tools. Integration: EAMic®'s software integrates seamlessly with your existing IT infrastructure, including other management tools, to provide a comprehensive solution. Scalability: EAMic®'s software is scalable, accommodating your current and future growth while providing flexible licensing models that fit your budget. Security: EAMic®'s software provides robust security features, including data encryption, access controls, and regular security updates. Reporting: EAMic®'s software offers robust reporting capabilities, including customizable reports, dashboards, and real-time analytics, enabling you to track and manage your IT assets effectively. Support: EAMic®'s software comes with excellent customer support, including technical support, training, and ongoing maintenance. In conclusion, selecting the best IT asset and maintenance management software is critical for managing your IT assets effectively, optimizing your costs, and minimizing your risks. Choose EAMic®'s Life Cycle Asset Management Software, and you can rest assured that you have made the best choice for your business needs. Now the price of electronic maintenance management system is reasonable, if you have needs, please contact us.

Minimum Order: 1 bags

Accurately control the temperature and integrate a number of technologies for efficient purification. Characteristics of Melt Crystallizer 1 High product purity: The product purity can be above 99.99% chromatographically pure according to customer requirements. 2 Low operating temperature: Generally, it is operated at atmospheric pressure and low temperature, with simple and safe operation. 3 Wide applicability: It is very difficult to separate isomers and chiral substances by distillation, while separation can be easily achieved by melt crystallization. 4 No solvents required: The crystallization process does not require the addition of other solvents, which can effectively avoid the increase of impurities caused by the introduction of solvents and environmental pollution. 5 Investment saving: There are no excessive requirements for equipment, which can reduce costs and equipment investment. 6 Energy conservation and environmentally friendly: The energy consumption of melt crystallization is generally only 10%-30% of that of distillation. Applications of Melt Crystallizer Petrochemical industry: 1,2,4,5-Tetramethylbenzene, Maleic anhydride, P-xylene, M-xylene Biosynthetic materials: Dimethyl succinate, lactide, pentanediamine, long-chain dicarboxylic acid Polymer monomer: Bisphenol A, acrylic acid, caprolactam, dimethyl terephthalate, hexanediamine Coal chemical industry: Refined naphthalene, Fischer-Tropsch wax, cresol, naphthol Electronic Chemicals: Ethylene carbonate, Dimethyl carbonate, Vinylene carbonate, Hydrogen peroxide, Phosphoric acid Fine Chemicals: Benzoic acid, Phenylenediamine, Dichlorobenzene, Chloroacetic acid, Nitro chlorobenzene If you are looking for a reliable chemical process company, don't hesitate to contact us!

Minimum Order: 1 bags

Looking for a natural and effective solution to keep rodents at bay? Look no further than Sanspest rodent repellent products. Made with natural mint, a powerful and proven ingredient, our products are designed to keep your space free from rodents without harming the environment. Our products are trusted by homeowners and businesses alike, and are perfect for use in a variety of settings, from homes to offices and beyond. Keep your space rodent-free with Sanspest. How Many Hours Does Rodent Repellent Work? At Sanspest, we understand the frustration of dealing with pesky rodents. They can not only be a nuisance but also a potential health hazard. That's why we've created a range of rodent repellent products that are effective and long- lasting. Our rodent repellent products are made with natural ingredients and essential oils, such as peppermint and cedarwood, which are known to repel rodents. We believe in providing safe and eco-friendly solutions that are gentle on the environment while keeping your home or workspace rodent-free. Our products are designed to provide protection for up to 30-60 days, depending on the environment of use. They are particularly effective in enclosed spaces such as homes, offices, and warehouses. Our long-lasting formula means that you don't have to constantly reapply repellent, making it a convenient and cost- effective solution. Even in more challenging environments, such as outdoor spaces, our products still provide reliable protection for up to 15-30 days. Whether you're camping, gardening, or having a picnic, our rodent repellent products are designed to keep you and your loved ones protected. At Sanspest, we are committed to providing our customers with high-quality, effective, and long-lasting pest control solutions. Trust us to keep your home, workspace, and outdoor areas free from rodents. With our natural and eco- friendly rodent repellent products, you can enjoy a pest-free environment without the use of harmful chemicals. What Is The Shelf Life Of Our Rodent Repellent? What Is The Shelf Life Of Our Rodent Repellent? We believe that proper storage is crucial to maintaining the effectiveness of our Rodent repellent products. Our products have a shelf life of 18 months, and to ensure their maximum effectiveness, we recommend storing them in a cool and dry place, away from direct sunlight and heat sources. Exposure to high temperatures and humidity can reduce the effectiveness of our Rodent repellent products and shorten their shelf life. To avoid this, it's essential to store them properly in a cool and dry environment. By following these simple storage guidelines, you can ensure that your Sanspest Rodent repellent products are always ready for use whenever you need them. So, whether you're storing them at home or taking them with you on your outdoor adventures, make sure to keep them in a cool and dry place to ensure their maximum effectiveness. We provide best rodent repellent for attic, best rodent repellent for car engines, best under hood rodent repeller, best mice deterrent, best mice repellent for house, best mouse deterrent, best mouse deterrent for campers, best mouse deterrent for garage, pest repeller, etc. For more information, please feel free to contact us!

Combines Cryolipolysis, Cavitaiton and RF 3 technologies; with 5 treatment handles for total body treatment, fat reduction, body sculpting and face lifting. Triglycerides in human fat are transformed into solids at a low temperature of 5℃, and die after crystallization and aging, and are excreted with metabolism, thus reducing the number of fat cells and achieving the effect of permanent slimming and body. Specification of Cryolipolysis Cavitation RF Machine Power 1800W Vacuum 0-100kpa RF energy 1-50J/cm2 Cavitation energy 1-70J/cm2 Handpiece Screen 3.5 Inch RF frequency 2MHz Cavitation frequency 40KHz Treatment handle 5units (Optional) Touch screen size 12.1 Inch Frozen head temperature -10℃--5℃ Cooling system Semiconductor Cooling + water-cooling + air cooling Voltage AC220V±10%, 50HZ AC110V±10%, 60HZ Benefits of Cryolipolvsis+Cavitation+RF Machine  Multifunction Combining the three technologies of cryolipolysis, cavitation and RF into one. Cooling System The copper radiator and DC cooling fan ensure continuous operation of the machine for 12 hours.

Minimum Order: 1 bags

vibrating tongue toy Description Shaped a tongue eager to lick, lap, buzz and throb in ten possible rhythms, the tireless Tongue-gasm is rechargeable (ie. ready when you are) and fully waterproof for splashy fun or sexy doings on dry land. Easy to control and comfortable in hand, the Tongue-gasm can (and should!) be used in just about any position. It's a great pinch hitter during oral sex, but also a fantastic addition to all kinds of foreplay, alone time and possible penetration scenarios. Ten modes of heating and escalating vibration are waiting for a push of the center button. Hold it down for five seconds to activate, then push quickly to change up the rhythm. Yowza! The Tongue-gasm powers up via USB using an included cord. 90 minutes of charging, more than 50 minutes of battery life, fast charging. Specifications Product size：1.6*0.87*4.65in 40 degree intelligent heating 3 speeds, 7 vibration frequencies User Manual Press and hold for 5 seconds:Power on/off Short Press:Switch frequency Double Press:Turn on Heating. For more information about sex toy on sale, please feel free to contact us!

Minimum Order: 10000

Featured Products 20+ years of capsule endoscopy innovation: JINSHAN is dedicated to provide the GI solutions through integrity, reliability and usability and we strive to develop latest technology to make OMOM HD capsule as your ultimate choice of small bowel capsuel. Capsule Endoscopy The OMOM HD capsule endoscopy provides a comprehensive solution for diagnostic of stomach, small bowel and colon easy and efficient. OMOM HD OMOM Robotic OMOM CC Refulx Monitoring Heretofore, GERD is still comprehensive for patients and physicians. Our Reflux Monitoring Platform provide the accurate GERD diagnosis procedure to physicians and patients. Impedance pH Monitoring System pH Capsule Monitoring System Endoscopy Related JINSHAN endoscopy related portfolios provide an one-stop service with our innovative, smart and cutting edge endoscopy equipments. From electrosurgery, irrigation, CO2 insufflation and daily tubings, we are committed to develop the best needed products wi ENDOLINQ™ Irrigation Pump ENDOLINQ™ Co2 Efficient Endoscopic Insufflator Electrosurgery Unit LinqCAP Endoscopic Irrigation Tubing As one of gastroenterology equipment manufacturers, we will do our best to meet all the needs of customers.

Minimum Order: 1 bags

Since infants learned to sit and stand for six months, their physical development has made new progress every day. Three meals a day is a major event for infants to grow up. Our baby feeding products help the baby to successfully transition from one-on- one feeding to dining at the same table with parents and elders, which not only makes it easier for parents to take care of the baby, but also allows the baby to find fun in the process of eating. Types Of Baby Feeding Products For Sale Baby Grooming Kit Baby High Chair Baby Proofing Kit Functions of Babyhood's Baby Feeding Products Baby Grooming Kit: Baby nail clippers are specially designed for the baby. The safety jaws are designed to fit the baby's nails. It is not easy to hurt the baby’s fingers, which is more safe and convenient. Baby High Chair: It can free the baby's hands, without holding the baby when feeding. Exercise the baby’s ability to eat independently and cultivate the baby's eating habits. Stay Safe: The anti-collision strips are usually thick, soft and very elastic. The anti-collision strip has double-sided adhesive tape, which can be firmly attached to the sharp corners, and can reduce the chance of children being injured effectively. Why Choose Babyhood's Baby Feeding Products? Good Raw Materials The baby feeding products is made of non-toxic and harmless PP material and is specially designed for children. Security Our products are designed in strict accordance with national standards to ensure the safety of the baby. Let the mother feel more at ease when using it for the baby. Brand Awareness Our company has been developing for many years, and our brand popularity has gradually expanded, and our products are widely popular at home and abroad. Reputable Due to years of special experience in the production of infant products, combined with infant’s unique ergonomics. Our company has won praise from customers at home and abroad for its humanized design, original appearance and good safety performance. Warnings of Our Baby Feeding Products When using the baby high chair, it must be placed horizontally. Do not put the dining chair in a dangerous place. If any damage or missing items. Please do not use. Our feeding infant products must be used under the supervision of adults. Do not leave children alone. Keep away from strong sunshine or frozen place. Now the price of feeding chair is low, if you are interested, please leave us a message.

Minimum Order: 100

Where the e-bikes/e-scoters often pass by and stay, it charge the batteries at short time and extend the travel distance when the e-bikes are in the low battery during the travel. Specs of Smart Ebike Charger Type: Smart RE-bike Charger Certification: CE Warranty: 12 Months Product size: 32*14*52 CM Charge Current: 12A/10A/7.5A/7A/5A Optional Applicable Batteries: 36V/48V/60V/72V Color and Pattern: Customized How to Use Smart Charger?  The PayBlox Smart E- Bike Charger offers consumers and merchants an easy way to use it. Just scan the QR code on the charging station through the PayBlox App on your mobile phone and select a charging plan, then pay through the PayBlox e-wallet, and the charger will automatically start working. For businesses, simply click on the business page to see the entire business at a glance.

Minimum Order: 1 bags

Boat anchor accessories from TITANSUHE including various anchors, anchor chains, and boat anchor accessories such as kenter shackle, end shackle, swivel, etc. Anchor-is an essential part of the ship and is one of the most widely used items in the marine industry. We provide AC-14 high holding power boat anchor parts, hall anchor and plough anchor. Chose the right boat anchors and accessories according to the length and weight of your ship. Weather conditions must be also take into consideration when choosing an anchor marine parts. Anchor chain- is a chain connecting the anchor and the hull, which is used to transfer and buffer the external force on the ship and also produces a part of the friction. We provide both stud link anchor chain and studless anchor chain. Stud link anchor chain have an extra strength while studless anchor chain is more convenience to be connecting for a long pices and attach to the anchor point. Chain accessories-Including kenter shackle, end shackle, swivel shackle, end link, etc. All these accessories are used together with anchor chains to make connection with the ship, anchor point or anchor chain itself. Types of Anchor Marine Parts 01 Marine Anchor Anchor is the main part of the anchoring equipment, its an iron ship-stopping device, which is connected to the ship with an iron chain. It can stabilize the hull when throw the anchor on the bottom o... AC-14 Anchor Plough Anchor Hall Anchor Anchor Chain 02 Anchor Chain Marine stud Link anchor chain is a special chain that connects the anchor and the ship. Due to its own heavy weight, the marine stud Link anchor chain can buffer external forces when yacht or boat moo... Stud Link Anchor Chain Studless Anchor Chain Anchor Fittings 03 Anchor Fittings Anchor fittings are utilized for connecting two individual chains. Many kinds of anchor accessories such as kenter shackle, end shackles, anchor swivels, and so on come into this purpose. No matter sh... Kenter Shackles End Shackles Anchor Swivel Mooring Rope 04 Mooring Rope The rope has kinds of good properties such as high tensile strength, impact resistance, abrasion resistance, flexibility, lightness and softness. Its a multi-strand ropes aim to tying ships.If sort mo... Natural Fiber Rope High Performance Polypropylene Fiber Rope Boat Anchor Parts Strength Information If you need any kinds of lifting chain, please contact us, as one of the most professional lifting equipment manufacturers, TITANSUHE is willing to offer you high quality products.

Minimum Order: 1 bags

There are only two companies in China that can independently develop and produce fully automatic cotton candy machines with independent patents and technologies, and we are one of them. What advantages make us lead the industry. 1, Subsidiary , Red Rabbit Intelligent Co., Ltd founded in 2017, which engaged in the R& D fully automatic cottonvending machine for five years. 2, We have an independent remote control system, Mobile phones can also control the machine to set up many things. For example, the timing of switching on and off, selling price, Change the flower name, Inventory alert. Thanks to the optimization of our system, our machine now have 36 patterns to choose, 8KG of sugar can make 300 flowers. 3, For the core component the burner, has the same one-year warranty as the machine. Because we use brushless motor technology, Make it last up to 8 times longer than a brushed motor. 4, We have two injector on the burner, This allows the interior of the machine to be humidified faster, save more time of the whole process, makes the flower shapes more beautiful. 4, Core component, mechanical arm. We use optical eye technology. Make the arm more flexible and precise , which make the whole manufacturing process is more time-saving.