Tools & Hardware

This product is portable design,used in laboratory or on-site to auto check kWh meter error. Accuracy class:0.02. 7 inch TFT color lcd Large capacity storage device. "Check wiring failures and calculation of electricity compensation Input two pulse signal." 0-600V/1mA-120A. Self adjusted clamp-on CTs. measured CT variable ratio. Input two pulse signal.

Minimum Order: 1 bags

CAT E312B Excavator Center Joint seal kit Product Description of CAT E312B Excavator Seal Kit: Category Excavator Seal Kit Product Name CAT E312B Center Joint seal kit Seals Type Center Joint seal kit Fit for Model CAT E312B Package of Goods PP bag inside, carton box outside Temperature -30 ~ +130℃ Payment Method T/T, Western Union in advance Delivery Time 1~3 days after receiving the payment Shipment By sea, by air, by express, or as requested

1.The gold-steel grinding disc surrounds the diamond grains with a resin body and is bonded to the fiber mesh. At the same time of high-speed grinding, the wear-resistant fiber mesh polishes and smooths the slip marks left on the surface of the object, not only the coating is removed. The layer, which also polishes the surface of the object, is undamaged and is more suitable for sanding thin metals. 2. Economic and practical With high wear-resistant materials, the sand does not fall off during grinding, the grinding does not accumulate, and it does not adhere. Base Special fiber Application Used for surface grindingof paint, metal, plastic products, wood, stone and other material. It is widely used to remove paint from the surface of vehicles and other vehicles,Grinding of metal welding scars and welds,Surface derusting. Brand name OEM Type Abrasive disc Place of Origin Jiangsu, China Packaging Details 10pcs/bag,30bags/ctn,300pcs/ctn

1) Material: Stainless Steel 201 , 304 , 316 2) Uses: With the same width stainless strap used together, petro-chemical, pipe insulation, bridges, pipelines , cables, traffic signs , billboards , electric signs , cable trays and other bundled fixed. 3) Types:Dental Stainless Steel Packaging Deduction L Stainless Steel Packaging Deduction S type Stainless Steel Screws

Factory Direct Sales Wholesale Tungsten Carbide Thread PDC Oil Drill Bit Nozzle Specifications There are two examples as below showed, we also accept your inquiry with drawings. Model MJP-CSA-2512 MJP-CSA-2 , 012 MJP-CSA-2002 Outer Diameter 25.21 20.44 20.30 Total Length 34.80 30.61 30.80 < , br>Thread 1-12UNF-2A 3/4-12UFN-A-2A< , br> M20x2-6h Small Outer Diameter 22.2 16.1 16.1 Length 15.6 11.56 11.55 , Endoporus 15.8 12.6 12.7< , br> Chamfer Angle 3.4x20° 1x20° 2.4x20

1: Specification Grinder Cut Off Wheel is using high-quality Aluminum oxide, Excellent durability, and sharpness, high-speed cutting, applicable to all metal/ stainless cutting; high performance. with good quality. and have excellent abrasive performance. and with good material WA-white aluminum oxide. Grinder Cut Off Wheel cut or notch surfaces with Reduced vibration &increased cut stability and Precision cutting & consistent wear rate.Grinding wheels boast a long life and are perfect for aggressive stock removal applications. 2:Product Details Form of Grinder Cut Off Wheel Size Out Packing Inner Packing Packing Size Max Speed 107x1.2x16mm 800,900, or 1000pcs 100pcs 60x25x21Cm 72-80M/S 3: Usage of Grinder Cut Off Wheel Grinder Cut Off Wheel is used for steel, Stainless steel, cast iron, carbon steel, alloy steel,nonferrous metals,timber cutting and polishing! 4: Storage Conditions During storage, grinding wheels must not be subjected to: . Exposure to humidity,water or other liquids .Freezing temperatures Any temperature low enough to cause the formation of condensation on the wheels when moving from storage to an area of high temperature. 5:Main Features • Exceptional speed & controlled cutting and smooth grinding • Reduced vibration & increased cut stability • Precision cutting & consistent wear rate • Maximum performance premium quality product. • Produced to MPA EN12413 safety standards.

SKF ：VKBA 927 SNR: R158.02 FAG: 713690110 OPTIMAL: 801538 QH: QWB 249 TIMKEN: K83201 RUVILLE: 5802 Ref.: FIAT 336658 FIAT 46576155 FIAT 60055388 FIAT 8582739 SEAT BA158236.00 SEAT BA158237.00 BRAND (MODEL) / MARCA (MODELO): FIAT (126/500/600), FSO (126), SEAT (600) Location: China Business Type: Manufacturer, Exporter Brands: SNMRB Terms of payment and delivery: CFR or FOB Minimum order quantity: 200SETS Price:： Consultation Packing details:: Plastic bag + Carton + Pallet Delivery time: 30days once order confirmed Payment method: 20% Deposit when order, the balance will be paid when shipment

Minimum Order: 1000

Products Details: Available Material 1. Stainless Steel: SS201, SS303, SS304, SS316, SS410, SS420 2. Steel: C45(K1045), C46(K1046), C20,etc. 3. Brass: C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200CuZn37), C28000(CuZn40),etc. 4. Bronze: C51000, C52100, C54400, etc. 5. Iron: 1213, 12L14, 1215, etc. 6. Aluminum: Al6061, Al6063, etc. 7. Carbon steel: C1006,C1010,C1018,C1022,C1035K,C1045,12L14,etc. 8. Alloy steel: SCM435,10B21, C10B33,etc. Material Class 4.8 6.0 8.8 12.9 Specification Various head style and sizes per your request Surface Finishing Zn-Plated, Ni-plated, Tin-plated, Passivated, Sandblast and Anodize; Chromate, Polish, Electro Painting, Black Anodize, Plain, Chrome plated; Hot Deep Galvanize(H.D.G.) etc. Heat Treatment Tempering, Hardening, Spheroidizing, Stress Relieving. Standard ISO, DIN, GB, IFI, B.S. ART. Sample We could make sample within 7 days free of charge Lead time Per on order quantity Packing Boxes or pallet or customer request Payment terms L/C,T/T

Portable Hydraulic Jack Hammer/ YT 28 Rock Drill Rock Drilling Tools Product feature of Rock Drilling Tools The rock drill is a kind of high efficiency air leg rock drill machinery. It is mainly used for blasting holes and other drilling works in a quarries, railway construction, water conservancy construction and defence project facility. It is suitable for drilling and blasting under various of rocks and any direction angles. Blast hole dia is 34-42mm, drill hole depth is 5m. This machine may match with FT160BD short air leg of FT160BC long air leg. It is indispensably importance machine tool in metallurgy, coal, railway, traffic, water conservancy construction and national defence stone project. Blast hole dia is 34-42mm,drill hole depth is 5m Pay attention to the position of steel wire ring clamp, if found it fray,change it. Check steel wire ring clamp whether or not abrase, if so, change another at once. Do not allow use low burning point and easy explosion lubricating oil. Product data of Rock Drilling Tools SPECIFICATIONS for YT series pneumatic rock drilling machine with air leg Model YT28 YT27 YT29A YT24C , TY24 Weight 26kgs 27kgs 26.5kgs 24k , gs 24kgs Length 661mm 668mm 659mm 628mm 678mm Air pressure 0.4-0.63Mpa 0.4-0.63Mpa 0.4-0.63 , Mpa 0.4-0.63Mpa 0.4-0.63Mpa Impact frequency ≧37HZ ≧39HZ ≧39HZ ≧3 , 7HZ ≧31HZ Air consumption ≦81L/s ≦86L/s ≦88L/s ≦80L/s ≦67L/s Impact energy ≧70J ≧75J ≧78J ≧65J , ≧65J Cylinder*stroke 80mm*60mm 80mm*60m , m 82mm*60mm 76mm*60mm 70mm*70mm Air pipe diameter 25mm 19mm 25mm 25mm 19mm Shank dimension 22*108mm 22*108mm 22*108mm 2 , 2*108mm 22*108mm Drilling depth 5m 5m 5m 5m 5m Bit diameter 34-42mm 34-45mm 34-45mm 34-42 , mm 34-42mm

Products : Strut Channel 304 stainless steel channel is more corrosion resistant than galvanized steel. It also has good chemical resistance. Features: 1) High-quality with most competitive price 2) Vertically integrated processes - cost saving 3) Strengthen manufacturing technique - heavy duty 4) Fully automatic machine once shaping - cost saving 5) No cheating material - quality reliable Applications: Koka strut channel is commonly used for trapeze supports, cable tray supports, seismic bracing, ceiling grids, pipe support, conduit, duct ,racks,solar mounting,HAVC system and other general framing. Specifications: 1) Specification:41x41,41x21,41x62,41x82 2) Thickness:1.5mm, 2.0mm, 2.5mm 3) Length: 2000mm , 3000mm, 6000mm or customization 4) Material: Q235 carbon steel/Stainless steel 304/Stainless steel 316 Part No. Size Thickness(mm) Length(m) Finish KK-4121 41x21 (1-5/8x13/16) 1.5/2.0/2.5 2.4/3/5.8/6 PG/HDG/PC/SS304/SS316 KK-4141 41x41 (1-5/8x1-5/8) 1.5/2.0/2.5 2.4/3/5.8/6 PG/HDG/PC/SS304/SS316 KK-4162 41x62 (1-5/8x2-7/16) 1.5/2.0/2.5 2.4/3/5.8/6 PG/HDG/PC/SS304/SS316 KK-4182 41x82 (1-5/8x3-1/4) 1.5/2.0/2.5 2.4/3/5.8/6 PG/HDG/PC/SS304/SS316 KK-4125 41x25 (1-5/8x1) 1.5/2.0/2.5 2.4/3/5.8/6 PG/HDG/PC/SS304/SS316

Project Technical index Type Ⅱ Type Ⅲ Chlorine content 1% 1% PH value 4-8 4-8 Conductivity(us/cm) 100 100 Bulk density (g/cm3) 0.6-0.7 0.6-0.7 Color White or Multicolor Blending White or Multicolor Blending Babbit hardness (HB a) 54-62 64-72 Qualitative analysis Urea formaldehyde resin Melamine resin Paint removal rate (square foot/min) 0.15 0.15 Initiative (mg/ Square centimetre) 0.5 3 Consumption rate (one cycle) 13% 13% Granularity 12-16#(1.70-1.20mm),16-20#(1.20-0.85mm) 20-30#(0.85-0.60mm),30-40#(0.60-0.43mm) 40 , -60#(0.43-0.25mm),60-100#(0.25-0.15mm)

Sliding door track, silver plated galvanized sliding door track for sliding, rolling driveway doors. It is easy to install and replace the crawler with bolts. Made of galvanized steel, this high quality U-shaped guide has no weld cracks or breaks, which helps in fighting Rust. Each section of the U TRACK measures 6 m x 55 mm and is made of Q235 galvanized steel Length: 2.9 metres, 3 meters, 5.8 meteres and 6 meters, Can be customized. Material: High quality Q235 galvanized steel. Color: Silver. Finish: Silver Galvanized. Usage: Used with sliding gate wheels, diameter of 20mm or 16mm.

Item Name LINER Part Number L16576-ZB Size STD Materials IRON Color BLACK Efficiency 90% Brand NPR brand Sample/Stock YES OR BOOKING Certification ISSO9001/TS 16049:2009,TUV Packaging NPR PACKING Application construction machines J05E

According to different places of use, down-the-hole drilling rigs can be divided into two categories: downhole and open-pit. Downhole drilling rigs can be divided into self-propelled and non-self-propelled according to whether there is a walking mechanism. There are many open-air down-the-hole drilling rigs in China, most of which are self-propelled. 2. According to the different diameters, down- the-hole drilling rigs can be divided into light-duty down-the-hole drilling rigs (aperture of 80~100mm) and medium-sized down-the-hole drilling rigs (aperture of 130~180mm) Heavy-duty down-the-hole drill (aperture 180~250mm)