Tools & Hardware

The wholly sintered diamond blade involves the process of merely putting the steel core, together with the diamonds and the metal bond materials, into a mould and then sintering it in a sintering furnace equipment. Consequently, the diameter of wholly sintered diamond blades is not very large, usually not more than 400 millimetres (16 in). The steel cores are hard because of the process of sintering. Therefore the hardness and strength of the centre are at an average level (not very high). These types of diamond saw blades would exhibit low cutting efficiency because of its high load and high intensity cutting processes.

Sintering Saw Blade The problem with the saw blade around each dealer, wholesaler, and the user is – Is the sintered saw blade interchangeable? What is the difference between sintered saw blade and other? This sintering technology not only increases the life of the saw blade but also increases the durability of the saw blade. Item Nr. Diameter(mm) Seg.Height(mm) Seg.Thickness(mm) Arbor(mm) 1RGM105 105 10 1.9 20/22.23/25.4 1RGM115 115 10 1.9 20/22.23/25.4 1RGM125 125 10 1.9 20/22.23/25.4 1RGM150 150 10 2.5 20/22.23/25.4 1RGM180 180 10 2.5 20/22.23/25.4 1RGM200 200 10 2.5 20/22.23/25.4

General Diamond Saw Blade Sintered Blade Description Segmented Sintered Item Nr. Diameter(mm) Seg.Height(mm) Seg.Thickness(mm) Arbor(mm) 1RGR105 105 8/10 2.0 20/22.23/25.4 1RGR110 110 8/10 2.0 20/22.23/25.4 1RGR115 115 8/10 2.0 20/22.23/25.4 1RGR125 125 8/10 2.0 20/22.23/25.4 1RGR150 150 8/10 2.0 20/22.23/25.4 1RGR180 180 8/10 2.3 20/22.23/25.4 1RGR200 200 8/10 2.3 20/22.23/25.4 1RGR230 230 8/10 2.5 20/22.23/25.4 1RGR250 250 8/10 2.5 20/22.23/25.4 1RGR300 300 10/12 2.9 20/22.23/25.4 1RGR350 350 10/12 2.9 20/22.23/25.4

GRISH Diamond Lapping Film is coated with precisely graded diamond powder on the high strength polyester backing to provide a uniform, consistent finish. Available in 0.5-80 μm grades, with or without PSA (Pressure Sensitive Adhesive) backing. Mesh:180,240,360,400,600,1000,1200 , ,2000,2500,4000,6000,8000,10000 Particle size/µm：80,60,45,40,30,16,15,9,6,3,2,1,0.5 < , br>Features 1.Useproprietary formula technology to ensure uniform dispersion of abrasiveparticles； 2.Stable product quality, small differences between batches 3.Not only has the high grinding force characteristics of fixed abrasives suchas grinding wheels, but also can achieve the polishing accuracy of freeabrasives such as grinding fluid; 4.With good strength and flexibility, can achieve the ideal surface polishingeffect; 5.Suitable for dry polishing, also suitable for polishing with water or oil asgrinding medium. Application： 1.For Optical fiber connector cutting Angle, coarse, medium and fine grinding; 2.Optical lens, optical crystal, LED, LCD grinding and polishing 3.Polishing of magnetic head and hard disk

Minimum Order: 10 long tons

GRISH Silicon Carbide Lapping Film is coated with precisely graded silicon carbide powder on the high strength polyester backing to provide a uniform, consistent finish. Available in 1-30 μm grades, with or without PSA (Pressure Sensitive Adhesive) backing. Specifications Mesh：600, 1000, 1200, 2000, 3000, 4000, 8000 Particle size/µm: 30, 16, 15, 9, 5, 3, 1 Remark: Customizations are available upon requests. Application: 1.For Optical fiber connector cutting Angle, coarse, medium and fine grinding; 2.Optical lens, optical crystal, LED, LCD grinding and polishing 3.Polishing of magnetic head and hard disk

Grish Final polishing Film is specially researched and developed for the final polishing of optical fiber connector. It is composed of nanometer silica particles mixed with high efficiency adhesive, evenly coated on the surface of polyester film, after drying and curing reaction. Because the polished original particles are fine and the particle size is smaller than the wavelength of visible light, they are evenly distributed to form a transparent or translucent abrasive paper. The Final polishing Film only needs to add purified water as the polishing medium. During the polishing process, the nano-coating of the polishing piece will gradually release the polishing particles and participate in the polishing effect, so that the end face of the fiber reaches a high degree of smoothness. The Final polishing Film can be reused many times, but depending on the type of polisher, conditions, and quality requirements, the number of times they are used varies. SO-01L, SO-01M and SO-01H series are GRISH new generation polishes. The improved products have higher polishing efficiency and grinding yield. The different polishing forces of the three products can meet different process conditions and grinding requirements. Specification of Final polishing Film: Appearance:Total transparent or semitransparent Mineral:SiO2 Particle size: 8～150nm (Laser granularity instrumentnpa-150) Size: Round: Φ70mm, Φ110mm, Φ127mm (5in), Φ203mm (8in); Rectangle: 114mm*114mm, 152mm*152mm (6inch), 203mm*206mm(8inch); Belt: 203mm (6inch) Remark: Customizations are available upon requests. Features of Final Polishing Film 1. High efficiency with good polishing ability; 2. Long Lifetime can greatly save costs; 3. Provide the stable fiber height. Using Method 1. Make sure there are no abnormal deep scratches or defects on the end face of the optical fiber after precision grinding of D1; 2. Thoroughly clean the grinding machine fixture and rubber pad and other parts, especially ensure the rubber pad surface intact, no foreign matter; 3. Spray an appropriate amount of purified water on the surface of the rubber pad, wipe it evenly with dust-free paper, and immediately stick the polish on the surface after the surface is dry; 4. Spray a small amount of pure water evenly onto the surface of the polish and wipe it evenly with dust-free paper to drive out the air below the polish 5. Purge the surface of the polish with compressed air to remove dust or foreign matter; 6. Then spray the surface of the polishes evenly with an appropriate amount of pure water 7. Gently release the connector fixture so that the connector end face is in even contact with the polishing plate, apply appropriate pressure, set the polishing time, and start the grinding machine to start polishing 8. After the grinding machine stops working, carefully remove the fixture, take out the polishing plate, and dry it for reuse

Micro finishing Film GRISH Microfinishing film is produced by coating the abrasive grains uniformly on the high strength PET film, which can provide high efficiency and achieve mirror finishing result. Available abrasive materials are aluminum oxide, silicon carbide and diamond etc. to meet different hardness of workpiece finishing requirments. Specifications Abrasive , /Grit Size Silicon Carbide(SC) Aluminum Oxide(AO) Diamond(D） 100µm #150: Aluminum Oxide(AO) 80µm #180: Silicon Carbide(SC), Aluminum Oxide(AO), Diamond(D）; 60µm #240: Silicon Carbide(SC), Aluminum Oxide(AO), Diamond(D）; 50µm #320: Aluminum Oxide(AO); 40µm #360: Silicon Carbide(SC), Aluminum Oxide(AO), Diamond(D） 30µm #600: Silicon Carbide(SC), Aluminum Oxide(AO), Diamond(D） 20µm #800: Aluminum Oxide(AO), Diamond(D） 15µm #1200: Silicon Carbide(SC), Aluminum Oxide(AO), Diamond(D） 12µm #1500: Aluminum Oxide(AO) 9µm #2000: Silicon Carbide(SC), Aluminum Oxide(AO) PET (base): Thickness: 100µm (4mil), 75µm(3mil), 125µm (5mil); Length: 200mm*15m, 101.6mm (4in)*46m, 100mm*15m, 112.6mm (1/2in)*46m; Backing: Anti-slip, PSA, Velcro Remark: Customizations are available upon requests. Features 1. High removal rate with well-plated abrasive grains; 2. Easy scraping and less plug; 3. Consistent finish performance with uniform PET backing and abrasive plated- upon; 4. Long durability and good cost-performance for customers. Applications: Crankshaft, Camshaft, Roller, etc.

Minimum Order: 1 bags

GRISH polishing flocked pile is produced by advanced electrostatic planting technology and precise coating technology. PGZ-1 is the flock planted directly on the polyester, and it can be used separately or used with the polishing liquid. PGZ-2 comes from PGZ-1 coated with the silicon oxide abrasive. Specification: Type PGZ , -1: No Abrasive, Application: Fiber Optic PGZ-2: Silicon Oxide Abrasive, Application: Fiber Optic Size: Φ70mm, Φ110mm (4.3inch), Φ127mm (5inch), Φ203mm(8inch); 114mm*114mm, 152mm*152mm(6inch), 228mm*280mm (9*11inch) Remark: Customizations are available upon requests. Features: 1. Outstanding polishing performance: Excellent polishing capability,outsdanding polishing effect and after polishing the roughness of the suerface can reach mirror level effect; 2. High degree of lapping uniformity: products' surface is neat and soft, can reach the high lapping consistency, can reach high degree of uniformity and smoothness after lapping/polishing; 3.Perfect curviture serface polishing effect: our products have good flexibility, can achieve a variety of curivture surface polishing, and the polishing effect is excellent; 4.Significant in reserving glass gullet/chip waste effect, Effectively avoid scratching: our products use electrostatic flocking substrates, with excellent elasticity and glass gullet/chip waste reserve and buffering effect, with water as polishing medium, can effectively avoid scratches to applying surfaces.

MPO（Multi-fiber Push On）Fiber Optic connector is a type of Plug and Play connector with multi-fiber cables as signal transmitting channels, Thus will require the polishing film being with the self-sharpening property, ensuring the Core Dip value will be positive one. Grish SC polishing film special for MPO utilize evolved coating recipe to produce our film with leading production technology to coat our films so much possibility as to meet customer’s manifold polishing condition. Specifications Model Particle size （μm） 12A 16 9 3 1 12B 16 9 3 1 Remark: Customizations are available upon requests. Features: 1. Slurry coating film with Uniform coating layer results in consistent polishing performance. 2. Featuring better self-sharpening during polishing 3. Uniform particle size help to get higher passing rate. 4. Can b e used for different polishing process 5. Two different recipe film models as option Applications: MPO/MTP Connector

MPO/MTP Polishing Pad GRISH MPO/MTP polishing pad, with an excellent interconnecting microporous structure, in the process of polishing can have excellent polishing stability and will be more durable on polishing life. It can be used together with Grish MPO polishing liquid, and is suitable for ultra-precision polishing of MPO/MTP. Specification Product Name: MPO/MTP Polishing Pad Material: Polyurethane (PU) Abrasive: N Color: Black Thickness(mm) 0.70-1.10 Shaw Hardness（A）: 70-90 Density(g/cm3): 0.500-0.700 Standard Pad Size: Disc：Φ127mm，with PSA Sheet：140mm*140mm，with PSA Remark: Customizations are available upon requests. Feature 1. Stable quality, good wear-resistance; 2. With good flexibility and elasticity, help to effectively avoid scratch; 3. The fluff gap on the surface can store a large amount of polishing fluid to improve the polishing efficiency; 4. Adhesive easy to strip off , no residual adhesive, easy to use. Instructions For Use 1. Take off the PSA paper of polishing pad, and attach the polishing pad to the glass pad evenly, ensure no air-gap; 2. Drip certain quantity of AO & CO slurry during polishing; 3. Please clean it with water after done polishing.

MPO/MTP Polishing Slurry (AO) Grish MPO/MTP Polishing Slurry (AO) is a kind of water-based, Eco-friendly polishing liquid, producing it with Superior Ultra fine polishing abrasives, featuring good dispersion, uniform Grit sizes, high polishing efficiency, mainly applied to fine polishing of MPO/MTP. Specifications: Name: MPO/MTP Polishing Slurry (AO) Model: Particle size（D50，um） AO-1-50B: 0.5-1.0 AO-1-50C: 0.5-1.0 Remark: Customizations are available upon requests. Features 1. Finer end-face finishing 2. Rare edge Fraction after polishing 3. Consistent Fiber Height for all ports 4. Easy cleaning for slurry and no residue. Applications: 1. Shake the slurry before using; 2. Used with MPO/MTP polishing Pad.

This rugged Strongway™ Garden Hose Reel Cart holds up to 400 feet of 5/8in. garden hose (not included). Features heavy-duty brass fittings, a strong tubular steel frame and welded handle with swivel grip for easy hose winding and unwinding. Solid steel axles and flat-free 10in. tires that never need to be inflated. What's Included (1) Garden hose reel cart Features + Benefits Durable tubular steel frame Easy-rolling 10in. flat-free tires and solid axles for rough terrain Holds up to 400 ft. of 5/8in. hose Integrated basket to store accessories Heavy-duty brass fittings and couplers Heavy-duty welded handle with swivel grip for easy winding and unwinding Corrosion-resistant industrial powder-coat finish Key Specs Item# 46378 Brand Strongway Manufacturer's Warranty 7 year limited warranty Ship Weight 59.0 lbs Reel Capacity (Hose Length ft. x Hose Diameter in.) 400 x 5/8 Frame Material Steel Wheel Size (in.) 10 Hose Included No Dimensions L x W x H (in.) 37 13/16 x 24 13/16 x 43 13/16

Minimum Order: 1 bags

This blower's comfortable and ergonomic design lets you take care of big jobs with ease. The fully-tensioned multi-material suspension system distributes weight evenly and comfortably between shoulders and hips. The powerful 32cc Troy-Bilt 4-cycle engine generates up to 500 CFM at 150 MPH without the need to mix gas and oil. Use one of Troy-Bilt's JumpStart engine starters, Item#s 42781 and 42787 (sold separately), to make getting started even easier. What's Included (1) Leaf blower Features + Benefits Powerful 32cc Troy-Bilt 4-cycle engine generates up to 500 CFM at 150 MPH without the need to mix gas and oil Ergonomic design lets you take care of big jobs with ease Fully-tensioned multi-material suspension system distributes weight evenly and comfortably between shoulders and hips Easy-to-use tube-mounted throttle control Compression-release technology for easy starts Use a Troy-Bilt JumpStart engine starter, Item# 42781 or 42787, to make getting started even easier 72dBA noise level Key Specs Item# 42790 Brand Troy-Bilt Manufacturer's Warranty 24 months parts / 24 months labor Ship Weight 19.0 lbs Blower Type Backpack Power Source Gas Cylinder Displacement (cc) 32 Air Velocity (MPH) 150 Air Volume (CFM) 500 Noise Level (dB) 72 EPA/CARB Approval (California Air Resource Board) Yes

Minimum Order: 1 bags

For light- and medium-duty applications. Replacement for Charlynn H, White HS and Ross TRW MG series. Maximum inlet pressure is 2500 PSI and maximum back pressure is 1000 PSI. Fully reversible. 4-bolt mount. 1in. x 1 3/4in. shaft has 1/4in. keyway. 1/2in. NPTF ports. Orbiting Gerotor Principle What's Included (1) Hydraulic motor Features + Benefits Compact, highly efficient, low speed high torque design can be used in either parallel or series systems Various applications are construction, agriculture, turf markets, mobile, aerial lifts and more 23.6 cu in. rev displacement 150 RPM 3850 max torque 1450 PSI 15.8 GPM 1in. Woodruff Key Shaft (K) Key Specs Item# 1039 Brand Dynamic Manufacturer's Warranty 12 months parts / 12 months labor Ship Weight 17.0 lbs Mounting Type 4-bolt Shaft Dimensions Diameter x L (in.) 1 x 1 3/4 Port Size (in.) 1/2 NPTF Displacement (cu. in.) 23.6 Max. RPM 150 Max. PSI 1,250 Max. Torque (in.-lbs.) 3,720 Max. Flow (GPM) 15.8

Minimum Order: 1 bags