Surface centrifugal pump

Surface centrifugal pump Surface water pump refers to a pumping device installed on
the ground, whose main function is to pump groundwater, river water, lake water,
etc. to household, agricultural, and industrial purposes. Compared to submersible
water pumps, surface water pumps are simpler to install and more convenient to use.
The structure of the surface water pump may also vary depending on the usage
situation. Structure of surface water pump The ground water pump mainly consists of
a motor, casing, impeller, mechanical seal, coupling, bracket, and other parts. The
motor and casing are the main supporting parts of the surface water pump, the
impeller is the key part of the pump water, the mechanical seal is very important
for the pump water seal, and the coupling plays a transmission role. The bracket is
designed to ensure the stability and safety of the ground water pump. Usage of
surface water pumps The use of surface water pumps is very simple. Firstly, choose
a suitable installation location, preferably a flat and close ground to the water
source. Then follow the instructions to install the ground water pump, connect the
power supply and inlet/outlet, and finally turn on the power supply. Maintenance of
ground water pumps The surface water pump needs regular maintenance during use to
ensure its normal operation. Specifically, it includes the following aspects: 1.
Regularly check whether the motor and casing of the surface water pump are loose or
damaged; 2. Regularly clean the inlet and outlet of the surface water pump to
prevent pump holes from being blocked; 3. Regularly replace the mechanical seal to
ensure the water seal of the pump; 4. Regularly inspect the impeller and coupling
of the surface water pump for any abnormalities; If the ground water pump is not
used for a long time, it should be dismantled, cleaned, and stored in a dustproof
and moisture-proof manner in a timely manner. Vertical or horizontal structure
Close coupled type or shaft coupled type Centrifugal or self- priming etc. Pump
material: metal (cast iron, stainless steel, duplex stainless steel etc), plastic
(polypropylene/PP, fluoroplastic /F46/FEP/PTFE/PVDF etc.) Pump is widely used in
industries to transfer /pump different fluids/liquids

Minimum Order: 1 sets

Click to Enlarge