WallysDRC-AP5159 Featuring with industrial-grade IPQ4019/IPQ4029 chipset 

Features
Featuring with industrial-grade IPQ4019/IPQ4029 chipset 
Th , e IPQ4019 and IPQ4029 are both chipsets developed by Qualcomm. These chipsets
are designed for use in wireless routers and other networking devices, and they
are based on a quad-core ARM Cortex-A7 processor.
The IPQ4019 is a mid-range chipset that supports up to 867 Mbps of 802.11ac Wi-
Fi throughput and is commonly used in residential and small business routers.
The IPQ4029 is a higher-end chipset that supports up to 2.2 Gbps of 802.11ac
Wi-Fi throughput and is often used in enterprise-level networking equipment.
Both chipsets include hardware acceleration for VPNs, support for multi-user
MIMO, and advanced QoS features. They also support a wide range of networking
protocols and interfaces, making them highly flexible and customizable for
various networking applications.

Integrated with 2x 2 5G high power Radio module and 2x2 2.4G high power Radio
module 
5G high power radio modules are designed for use in 5G cellular networks and
are capable of transmitting and receiving data at very high speeds. These
modules typically operate in the millimeter wave (mmWave) frequency band, which
is above 24 GHz, and require advanced technologies such as beamforming and
massive MIMO to overcome the high propagation loss at these frequencies. High
power versions of these modules are designed to provide greater coverage and
higher throughput in areas with weaker signal strength.

2.4G high power radio modules, on the other hand, operate in the 2.4 GHz
frequency band and are commonly used in wireless communication systems such as
WiFi, Bluetooth, and Zigbee. These modules typically have lower power
requirements than 5G modules, but high power versions are available for use in
applications that require greater range or penetration through obstacles such
as walls or floors.

Both 5G high power radio modules and 2.4G high power radio modules are used in
a variety of applications including telecommunications, industrial automation,
smart homes, and Internet of Things (IoT) devices.
Support 4.940GHz to 6.1GHz Frequency Range
This frequency range is within the unlicensed band of the radio spectrum and is
commonly used for various wireless communication applications, such as:

WiFi: The IEEE 802.11a standard operates in the 5 GHz frequency range,
including the range of 5.15 GHz to 5.85 GHz. This standard provides high-speed
wireless connectivity for local area networks (LANs) and is commonly used in
homes, offices, and public areas.

5G: The 5G NR (New Radio) standard uses frequencies in the range of 3.3 GHz to
4.2 GHz and 4.4 GHz to 5.0 GHz, as well as the millimeter wave (mmWave)
frequencies above 24 GHz. The 5G network is designed to provide high-speed data
transfer, low latency, and greater capacity for mobile communication.

WirelessHD: This standard operates in the 60 GHz frequency range and is used
for high-speed wireless communication between devices such as TVs, projectors,
and Blu-ray players.

Wireless gigabit Ethernet: This technology uses the 60 GHz frequency band to
provide high-speed data transfer between devices.

Other applications that may use this frequency range include radar, satellite
communication, and military communication systems.

Support 2.400GHz to 2.482GHz 
The frequency range of 2.400GHz to 2.482GHz is commonly used for various
wireless communication technologies such as Wi-Fi, Bluetooth, and Zigbee. These
technologies utilize the radio waves in this frequency range to transmit and
receive data wirelessly between devices. The 2.4GHz frequency range is widely
used due to its availability, low cost, and ability to transmit data over short
distances.
Support 2 x 5G MMCX Connectors and 2x2.4G MMCX 
These are specifications commonly used in the context of wireless communication
systems, specifically for antennas used in wireless routers, access points, and
other networking equipment.

The "2 x 5G MMCX Connectors" refer to two connectors that support 5 GHz
frequency bands and use the MMCX (Micro-Miniature Coaxial) connector interface.
This means that the antenna can be connected to two separate 5 GHz radios or
devices simultaneously.

Similarly, the "2x2.4G MMCX" refers to two connectors that support 2.4 GHz
frequency bands and use the MMCX interface. This allows the antenna to be
connected to two separate 2.4 GHz radios or devices simultaneously.

Overall, the use of multiple connectors and frequency bands allows for greater
flexibility and improved performance in wireless communication systems.
Support 5MHz/10MHz/20MHz/40MHz/80MHz Bandwidth 
Bandwidth refers to the range of frequencies that can be used to transmit data
over a communication channel. The bandwidth of a channel determines the amount
of data that can be transmitted over it per unit of time.

The bandwidth options you listed - 5MHz, 10MHz, 20MHz, 40MHz, and 80MHz - are
commonly used in wireless communication systems such as Wi-Fi and cellular
networks. These bandwidth options refer to the width of the frequency band that
is available for data transmission.

In general, a larger bandwidth allows for higher data rates, but also requires
more power and may be more susceptible to interference. The choice of bandwidth
depends on the specific requirements of the communication system and the
available resources.
Support 11ABGN/AC 
802.11a: This standard operates in the 5 GHz frequency band and supports data
rates up to 54 Mbps.

802.11b: This standard operates in the 2.4 GHz frequency band and supports data
rates up to 11 Mbps.

802.11g: This standard operates in the 2.4 GHz frequency band and supports data
rates up to 54 Mbps.

802.11n: This standard operates in both 2.4 GHz and 5 GHz frequency bands and
supports data rates up to 600 Mbps.

802.11ac: This standard operates in the 5 GHz frequency band and supports data
rates up to several Gbps.

Therefore, "Support 11ABGN/AC" means that the device is compatible with
multiple Wi-Fi standards and can operate in both the 2.4 GHz and 5 GHz
frequency bands, supporting high data rates up to several Gbps.
RoHS compliance ensure a high level protection of human health and the
environment from risks that can be posed by chemicals
19dbi 5GHz/16dbi 2.4GHz antenna (optional)


Wallys Communications (SuZ , hou) Co., Ltd., http://www.wallystech.com,which ,
 is mainly engaged in the research and development and production of wireless
communication
products,providing superior OEM/ODM/JDM ser , vices in wireless communicatio
ns and customer-specific solution.In addition to the PCBA mainboard, we can
also customize indoor or outdoor antennas, which we have extensive experience
in. There is also the Tooling. We can do the Tooling for the customer, to
undertake a variety of materials
mainly metal and plastic enclosure production. Whether antenna enclosure or
router enclosure, we can customize for you. Besides of the Qualcomm chips we
currently use, we can also use different chips to design according to
customers' needs
MAIL:sales3@wallystech.com
WEB:https:/ , /www.wallystech.com/

Click to Enlarge