AB,DB,JCB Coolant electric pump for machine tool

Machine Tool Cooling Pump
This series of electric pumps is a new type of electric pump that combines a closed
self cooling three-phase asynchronous motor and a single-stage centrifugal pump. It
is divided into AB, AOB, AYB, DB, YSB, JCB series. It has the characteristics of
low energy consumption, high efficiency, small size, light weight, low noise, large
flow rate, high head, high protection level, smooth operation, and safety and
reliability. Widely used for conveying circulating coolant in machine tools,
machinery, or other equipment (coolant is mostly soap water, soda water, emulsion,
light mineral oil, and other non corrosive liquids).
Main characteristics of machine tool cooling pump
The electric pump is made of aluminum alloy as a whole, which is lightweight and
durable.
2. Choose fully enclosed special bearings, high-quality lubricating grease, and
smooth operation.
3. The impeller is equipped with a new type of rubber sealing ring, which adopts a
special design to effectively prevent liquid from flowing into the interior of the
motor.
4. Electric pumps can transport liquids with a certain viscosity, such as oil.
Purpose: Mainly used for wetting systems, fuel delivery, and lubrication supply.
Suitable for 70 ℃, and also applicable to all mechanical equipment for lubricating
thin oil, dry oil centralized lubrication and oil supply devices, oil distribution
valves, connecting pipe fittings, and machine tools that transport advanced
circulating coolant.
Machine tool water pump cooling pump
5. The coolant pump first filters the coolant in the filter to remove impurities
from the coolant, and then pressurizes the coolant to deliver it to the tool with
internal cooling function. The chips generated by the cutting tool will also return
to the water tank with the coolant, which is the entire circulation process of the
coolant.
The ideal coolant is one that does not contain any solid impurities, but in
practical use, the coolant will inevitably mix with chips, especially in the
processing of cast iron and plastic parts with powder chips. Finally, impurities in
the coolant will act on the cutting area through the cooling holes of the tool, so
the impurities will also be repeatedly processed. The larger the volume of
impurities, the more impurities the coolant repeatedly cuts throughout the entire
cycle, and the wear of the tool and the machining effect of the workpiece will be
more obvious, which is closely related to the filtering function of the filter

Minimum Order: 1 sets

Click to Enlarge