Cyclone Separation Dust Collector

CLK Diffusion Cyclone Dust Collector
Details of cyclone collector
CLK diffusion cyclone dust collector is suitable for supplementing dry non-
fibrous granular dust. The main feature is that the barrel body is inverted
cone shape, thus reducing the possibility of dust gas from the center of the
barrel body to the outlet, Cone-shaped reflective screens are installed to
prevent the two air streams from re-coiling the separated dust and being
carried by the updraft, thus improving the dust removal efficiency.

CLK diffusion cyclone dust collector is used in the industries such as
metallurgy, foundry, building materials, chemical food, cement, etc. to
supplement the dry non-fibrous particulate dust and flue gas dust, and can be
used as recycling material equipment.

XD Type Multi-Cyclone Dust Collector
Details of cyclone type dust collector
XD type multi-cyclone dust collector is a kind of high-efficiency dust
collector. The dust removal efficiency can reach above 95%. The dust body
resistance is lower than 900Pa. The existing boiler induced draft fan can
ensure the normal operation of the boiler. XD type multi-cyclone dust collector
has good load adaptability. At 70% load, the dust removal efficiency is above
94%.

The cyclone in the XD type multi-cyclone dust collector is made of cast iron or
ceramic and its thickness is more than 6mm, so it has good wear resistance. It
is the ideal equipment for industrial boiler flue gas dust removal and other
dust treatment.

XZZ Cyclone Dust Collector
Details of cyclone dust collector
 XZZ type cyclone dust collector spirally moves from top to bottom when the
dust-laden airflow enters into the dust collector through the contraction-
shaped inlet. The dust material is run against the wall under the action of
centrifugal force, and it rotates down the wall to enter special In the sealed
and dust collecting device of the structure, the purified gas is discharged
from the bottom up and spirally through the core tube.
XZZ multi cyclone dust collector design Features:
The through-type bypass chamber is designed to effectively eliminate the ash
phenomenon and it is not easy to block.
The structure of the vertebral body close to the straight tube type was
designed, eliminating the formation of the lower gray ring, avoiding local wear
and rebound phenomenon of coarse particle dust, and improving the service life
and dust removal efficiency.

Minimum Order: 1 sets

Click to Enlarge