Industrial Machinery & Equipment

Price : USD 640.00/Pcs Min Order : 1 - 5 Pcs Lead Time : 3 – 5 Days Port : CIF / Kualanamu International Airport Terms : T / T, Western Union, Paypal, Money Gram Shipment : FedEx, DHL, UPS Product : Ori and Ready in stock Buy Roland RE-640 / VS-640 / RA-640 Eco Solvent Printhead (DX7) from Indoelectronic is 100% safe,Because purchase products at Indoelectronic provide a 100% money back guarantee. Location Indoelectronic : Jl.S.Parman No.21/272 Medan. To purchase online visit the website :indoelectronic.com Indoelectronic store Sell Brand model Printhead and Printers : Canon, Epson, Graptek, HP, Konica, Mimaki, Mutoh, Ricoh, Roland, Seiko, Spectra, Toshiba, Vutex, and Xaar. Contact us : order@indoelectronic.com Phone :+6281283202521 . Get the special price. Description Roland RE640 / VS640 Eco Solvent printhead (DX7) -6701409010 The Roland RE640 / VS640 dx7 printhead is suitable for Roland VS, RA and RE eco-solvent printers. The Roland RE640 / VS640 DX7 printhead has a native resolution of 360 dpi, 8 nozzle lines (corresponding with 8 independent ink channels) and 180 nozzles per line. The Roland RE640 / VS640 DX7 printhead is either used in 4-colour or 8-colour printers and has a minimum, variable droplet size of 1.5 pico litre (max. droplet size is 21 pico litre). The typical firing frequency for The Roland RE640 / VS640 DX7 printhead is 8 kHz. The Roland RE640 / VS640 DX7 printhead is based upon the most recent Epson technology. This is the original Roland printhead (part number 6701409010). To be used with: Roland BN-20 / RA-640 / RE-640 / RF-640 / VS-300 / VS-300i / VS-420 / VS-540 / VS-540i / VS-640 / VS-640i/ XF-640 / XR-640 Remarks: Original Part no : 6701409010 Product Specifications: • Technology: Micro-Piezo • Native resolution: 360 dpi • Min. Droplet Size: 1.5 pico litre • Tot. Amount of Nozzles: 1440 (8 lines x 180 nozzles) • Firing Frequency: 8 kHz • Ink Compatibility: eco-solvent and mild solvent • Damper type: requires DX6 Valve Dampers

Minimum Order: 1 bags

Price : USD 1,120.00/Pcs Min Order : 1 - 5 Pcs Lead Time : 3 – 5 Days Port : CIF / Kualanamu International Airport Terms : T / T, Western Union, Paypal, Money Gram Shipment : FedEx, DHL, UPS Product : Ori and Ready in stock Buy Xaar 1003-GS6U Printhead from Indoelectronic is 100% safe,Because purchase products at Indoelectronic provide a 100% money back guarantee. Location Indoelectronic : Jl.S.Parman No.21/272 Medan. To purchase online visit the website :indoelectronic.com Indoelectronic store Sell Brand model Printhead and Printers : Canon, Epson, Graptek, HP, Konica, Mimaki, Mutoh, Ricoh, Roland, Seiko, Spectra, Toshiba, Vutex, and Xaar. Contact us : order@indoelectronic.com Phone :+6281283202521 . Get the special price. Description Xaar 1003-GS6U Printhead Remarks: Original

Minimum Order: 1 bags

Price : USD 465.00/Pcs Min Order : 1 - 5 Pcs Lead Time : 3 – 5 Days Port : CIF / Kualanamu International Airport Terms : T / T, Western Union, Paypal, Money Gram Shipment : FedEx, DHL, UPS Product : Ori and Ready in stock Buy Xaar Proton 382 / 60 Printhead from Indoelectronic is 100% safe,Because purchase products at Indoelectronic provide a 100% money back guarantee. Location Indoelectronic : Jl.S.Parman No.21/272 Medan. To purchase online visit the website :indoelectronic.com Indoelectronic store Sell Brand model Printhead and Printers : Canon, Epson, Graptek, HP, Konica, Mimaki, Mutoh, Ricoh, Roland, Seiko, Spectra, Toshiba, Vutex, and Xaar. Contact us : order@indoelectronic.com Phone :+6281283202521 . Get the special price. Description Xaar Proton 382/60 printhead Remarks: Original

Minimum Order: 1 bags

Liquid Height Gauge Fuel Oil Tank Level Sensor For 220L Drum and Container Liquid Height Gauge For 220L Drum and Container Construction: PP (polypropylene) UV resistant String: Kevlar 2 inch and 3/4 inch male thread design Allows for simple stock-keeping Ease of installation and can be reused Reads in Litre Packing:25PCS/CTN

Minimum Order: 100

description of Bulldozer Cutting Edges MTW Wear Parts manufactures a complete range of edges and end bits for all makes and models of dozers—from small utility class up to the latest mining series. MTW Wear Parts has the highest quality edges and end bits engineered for specific applications. MTW Wear Parts dozer cutting edges and end bits are available in: Standard duty Heavy-duty Extra heavy-duty Custom Carbide impregnated Part Number Blade Position Qty Req Blade Type Thick Width Length(mm) Total Holes Weight 4T6381 Center 2 DBF 30x330x1352 9 97.7kg Package and shipments 4T6381 DBF Bulldozer Cutting Edges 9 Holes 97.7kg Heavy Duty 04T6381 DBF Bulldozer Cutting Edges 9 Holes 97.7kg Heavy Duty 1

PRODUCT DESCRIPTION Modular Multi-function Rotary Printing Machine Printing Press Product Presentation 1. Combined with offset, flexo or screen printing - tailormade combinations for customers specific needs 2. Flexible application of inline technologies - offers comprehensive solutions 3. Pre-registration and auto registration system - easier to operate 4. Lightweight sleeves - easier handling 5. Shaftless drive and servo drive technology - greater accuracy and precision printing Modular Multi Function Rotary Printing Press 150m/Min Packaging Printing Machine 0 Design Feature JDM420 modular multi-function rotary printing machine is ideal for a variety of substratesfrom 0.02mm to 0.35mm including paper, film, metal foil, cardboard and other materials. The wide range of printable substrates makes this a very versatile machine 1. Offset and flexo unit combination The ink fountain and the ink feed roller of the offset printing unit are controlled by the cooling water thermostat to maintain the stability of ink viscosity. The flexo unit with anilox sleeves makes sleeve changing quick and easy. Flexo printing can be applied to any printing station through the shared platform technology. 2. Enhanced stabilization with shaftless drive From unwinding to printing, die-cutting to rewinding, the whole machine uses servo drive technology. The printing tension is controlled by a closed-loop tension control system which is driven by a servo motor. All the offset printing cylinders (plate, blanket and impression), rubber cylinders and ink and water rollers are driven by separate servo motors for better stability 3. Optimized print management and machine adjustment Magnesium aluminum alloy plate and blanket sleeves make changing sleeve sizes quick and easy. Similarly, the printing format can also be changed easily. Using the PMC Print Management Center, the machine parameters can be adjusted at any time through the digital controller. In addition to those functions, the print jobs can be stored and recalled to set the machine for the next job, making it very operator friendly. Enhanced stabilization with shaftless drive Modular Multi Function Rotary Printing Press 150m/Min Packaging Printing Machine 1 Technical Parameters Model JDM420 Printing Speed 150m/min 492ft/min Printing Colors 4-12 Colors Printing Repeat Length 469.9mm-635mm 1.54ft-2.08ft Max. Web Width 420mm 1.37ft Min. Web Width 210mm 8.2in(Paper), 315mm 12.4in (Film Material) Max. Printing Width 410mm 16in Printable Thickness 0.04-0.35mm .001in-.01in Max. Unwind Roll Diameter 1000mm/350Kg 39in/771lbs Max. Rewind Roll Diameter 1000mm/350Kg 39in/771lbs Cold Foil Stamping: Max.Unwind Roll&Rewind Roll Diameter 600mm/40Kg 23.6in/88lbs Offset Plate Thickness 0.30mm .01in Model JDM420 Flexo Plate Thickness 1.14mm .04in Blanket Thickness 1.95mm .07in Double Sided Adhesive Thickness 0.5mm .05in Servo Motor Power 16kW/Color UV Power 7kW/Color Supply Voltage 3phase, 380V+-10% Control Voltage/Frequency 220V/50Hz Machine Dimension 13*2.22*2.28m42.6*7.28*7.4ft/5 Colors Net Weight: Offset Unit/Flexo Unit 2270kg 5004lbs/Color Net Weight: Unwinding Unit 1400kg 3086lbs Net Weight: Die Cutting, Stripping Unit 1350kg 2976lbs Net Weight: Rewinding Unit 920kg 2028lbs Structure Diagram Modular Multi Function Rotary Printing Press 150m/Min Packaging Printing Machine 2

PVC & PVG Conveyor Belt core flame retardant conveyor belt reinforced rubber belting PRODUCT DESCRIPTION Baoxiang PVG Conveyor Belt Specification Type Tensile strength/ N/mm, ≥ Breaking elongation/ %, ≥ Top/bottom cover/mm, ≥ Longitudinal Transversal Longitudinal Transversal 680S 680 265 15 18 1.5 800S 800 280 1000S 1000 300 1250S 1250 350 1400S 1400 350 1600S 1600 400 1800S 1800 400 2000S 2000 400 2240S 2240 450 2500S 2500 450 PVC Conveyor Belt Specification Type Tensile strength/ N/mm, ≥ Breaking elongation/ %, ≥ Top/bottom cover/mm, ≥ Longitudinal Transversal Longitudinal Transversal 680S 680 265 15 18 1.0 800S 800 280 1000S 1000 300 1250S 1250 350 1400S 1400 350 1600S 1600 400 1800S 1800 400 2000S 2000 400 2240S 2240 450 2500S 2500 450 Safety performance Name of the performance Alcohol burning Propane burning Different electric performance Roller friction Standard value Average value≤3S, single value≤10S (with cover glue) ≧250mm ≦3x10 8 Ω ≦325°C Average value≤5S, single value≤15S (with cover glue) No mars The whole core flame retardant conveyor belt is made of the whole belt core impregnated by PVC impregnated paste plasticization or vulcanization, with large strength, large volume, transport balance and other characteristics, and the product has good flame retardant, antistatic, impact resistance, wear resistance, corrosion resistance and other properties. The whole core flame retardant conveyor belt is mainly used in underground coal mine, but also for material transportation in metallurgical and chemical industries.The belt features: no delamination, small elongation, impact resistance, tear resistance.According g to the different knots can be divided into PVC type (plastic surface), PVG type (on the basis of PVC with rubber surface) whole core flame retardant tape. PVC upper and lower covering layers shall be PVC cover adhesive, single side adhesive ≥ 0.8mm, PVG upper and lower covering layers shall be both nitrile butadiene rubber and PVC, and the single thickness shall be 1.5mm-4.5mm PVC conveyor belt transport dip Angle <16°, PVG conveyor belt transport dip Angle <20°, can be used in coal mines, underground transport. Baoxiang is a multifunctional conveyor belt manufacturers that integrates production line development, manufacturing, debugging and technical transformation. Its products include conveyor belting, nylon conveyor belt, etc. Our website:www.baoxiangbelt.com

Vacuum Rubber Filter Belt ordinary rubber conveyor belt vacuum filter belt rubber vacuum filter belt PRODUCT DESCRIPTION Baoxiang Vacuum Rubber Filter Belt is used in supporting the use of vacuum filter machine conveyor belt, the conveyor belt and ordinary conveyor belt of the main difference is that it is not the main function of transportation, but for waste collection, generally used in the liquid transportation of chemical industry, so in general rubber filter belt to acid and alkali resistance is strong. In addition, vacuum rubber vacuum filter belt has high-temperature resistance, heat resistance, cold resistance, oil resistance, flame retardant and other advantages, these advantages are suitable for different material transportation. General which acid and alkali resistance, high-temperature resistance is used more. In order to increase the abrasion resistance and service life of rubber vacuum filter belt, there are a variety of different rubber formulations, which have very high abrasion resistance. In the process of long-term use, there will be no rubber opening, belt body damage, etc., which can realize long-term transport, improve transport efficiency, and reduce the overall transport cost. Generally speaking, a vacuum filter belt is not an ordinary rubber conveyor belt, because its production process is more complex, so the overall cost is relatively high. The main reason is not only the design of the formula but also the engraving of the filter tank. This rubber filter tank requires very high precision, so it is all made by hand. And are several people need to be carved in a strict environment, not the slightest deviation. In this way, the vacuum filter belt can achieve a good filtration effect and achieve high-quality filtration. Baoxiang provides rubber belting for sale, we are committed to the alkaline resistant conveyor belt, material handling conveyor belt series, rich experience, welcome to consult. https://www.baoxiangbelt.com/produ , ct-vacuum-rubber-filter-belt.html

Lightweight Conveyor Belt light weight conveyor belt manufacturers conveyor belting supply industrial conveyor belt PRODUCT DESCRIPTION The Lightweight Conveyor Belt is made of specially treated polyester yarn braided fabric as the bearing frame, with one or two sides coated with rubber or PVC, PU, PE as the carrying surface or the driving surface. The light weight conveyor belt has the characteristics of high strength, small extension, good bending flexibility, wide working temperature, stable operation and long service life. Hebei Baoxiang Conveyor belt Manufacturing Co., Ltd. Is a medium-sized joint- stock enterprise leading in the production of "Baoxiang" special series conveyor belt, located in The Industrial zone of Liutuodian, Boye County, Hebei Province.Founded in 2010, it is a key enterprise of chemical industry in Hebei Province and a member of China Rubber Industry Association. Main production B6000mm under ordinary conveyor belt, nylon, polyester, raised edge conveyor belt conveyor belt, heat resistant, high temperature resistant conveyor belt, or circular conveyor belt, pattern conveyor belt (herringbone pattern, concave and convex decorative pattern, eight decorative pattern, fishbone, u-shaped pattern, cylindrical pattern, pitting pattern conveyor belt, etc.), PVC, PVG entire core flame retardant conveyor belt, acid and alkali resistant, oil resistant conveyor belt conveyor belt, steel wire laceration resistant conveyor belt, round tubular conveyor belt, rubber hose, spiral mesh conveyor belt, etc. If you are interested in rubber conveyor belts, please click here. https://www.baoxiangbelt.com

General Rubber Conveyor Belt cotton polyester canvas conveyor belt industrial conveyor belts manufacturers PRODUCT DESCRIPTION General Rubber Conveyor Belt product features 1. Ordinary conveyor belts are made of cotton canvas (CC) or VC (VC) after rolling, molding, vulcanization and other processes. 2. Rubber conveyor belt is suitable for conveying non-corrosive bulk, granular and powder materials, such as coal, coke, sand, cement and other bulk materials or finished articles at room temperature. 3. The product can be made into different structures, such as envelope-side type, open-side type, middle ladder type and side ladder type, to meet the requirements of different use conditions. Baoxiang Cotton polyester canvas conveyor belt Cotton canvas is made of cotton fiber in both warp and zonal direction, with low elongation and good adhesion.Under the condition of high temperature deformation is small, suitable for short distance, transport volume smaller situations, conveyor belt is made of cotton conveyor belt upgrade product quality, its tensile body USES the meridional blended YingWei and zonal, cotton woven performance is better than that of cotton conveyor belt, especially with thinner, lighter, impact resistant performance is greatly improved.Suitable for conveying materials in short distance and medium load conditions. According to the different properties of the covering rubber can be divided into ordinary type, heat resistant type, fire resistant type, burn resistant type, acid and alkali resistant type, oil resistant type, etc. rubber conveyor belts Specification (1) Core material: TC-70 polyester/cotton interwoven fabric, CC-56 cotton canvas (2) Belt width: 100mm-1600mm (3) Layer: 1-10 layers (4) Covering glue: Working surface: 1.5-9mm Non-working surface: 0mm-4.5mm Belt width(mm) Cloth layer number Thickness of covering glue(mm) Working surface Non-working surface 300 3~5 4.5 3.0 1.5 3.0 1.5 400 3~6 4.5 3.0 1.5 3.0 1.5 500 3~6 4.5 3.0 1.5 3.0 1.5 650 3~6 4.5 3.0 1.5 3.0 1.5 800 3~8 6.0 4.5 3.0 1.5 3.0 1.5 1000 3~8 6.0 4.5 3.0 1.5 3.0 1.5 1200 4~10 6.0 4.5 3.0 4.5 3.0 1.5 1400 4~10 6.0 4.5 3.0 4.5 3.0 1.5 1600 4~10 6.0 4.5 3.0 4.5 3.0 1.5 1800 5~10 6.0 4.5 4.5 3.0 2000 5~10 6.0 4.5 4.5 3.0 2200 5~10 6.0 4.5 4.5 3.0 (1) Specification for tensile strength of tape of full longitudinal thickness： N/mm 180 200 250 315 400 500 630 (2) Physical properties of cover： Overlay performance level code Tensile strength ≥ elongation at break %≥ Abrasion value mm3≤ 70℃ × 168h After aging, the change rate of tensile strength and elongation at break %　 MPa kgf/cm2 Laceration resistant type H 24.0 180 450 120 -25~+25 Anti-abrasive type D 18.0 140 400 100 -25~+25 Ordinary type L 15.0 100 350 200 -25~+25 (3) Interlaminar bonding strength (including natural fiber fabric core) Index name Cloth layer between Between the covering layer and the cloth layer Thickness of covering layer≤1.5mm Thickness of covering layer＞1.5mm N/mm N/mm N/mm Average value of longitudinal sample ≥ 2.7 2.1 2.70 The lowest peak value of all longitudinal samples≥ 2.7 1.6 2.2 Baoxiang provides rubber belting for sale, we are committed to the alkaline resistant conveyor belt, material handling conveyor belt series, rich experience, welcome to consult. Our website:www.baoxiangbelt.com

EP Nylon Conveyor Belt portable conveyor belt nylon fabric conveyor belt rubber conveyor belt manufacturers PRODUCT DESCRIPTION Place of Origin: Hebei, China Brand Name: Baoxiang product: conveyor belt Physical Properties of Rubber Cover (before aging) of Wholesale Conveyor Belt Grade Tensile Strength/Mpa ≥ Breaking Elongation/% ≥ Abrasion Loss/mm3 ≤ H 24 450 120 D 18 400 100 L 15 350 200 Note:Grade H-used for transporting sharp, abrasive materials which can damage belts badly. Grade D-used for transporting highly abrasive materials. Grade L-used for transporting medium-abrasion materials. After-aging properties of rubber cover(70℃, 7days): Tensile strength and breaking elongation are both not lower than 75% of before- aging values. Full-thickness Tensile Properties of Portable Conveyor Belt a. Longitudinal tensile strength, not less than the below table. (N/mm) Nominal belt type 160 200 250 315 400 500 630 800 1000 1250 1600 2000 2500 3150 b. Full thickness, longitudinal elongation at reference force, not more than 4%. c. Ply adhesion: Item Ply to ply Rubber cover to ply Rubber cover thickness 0.8-1.5mm Rubber cover thickness >1.5mm All samples average value/ (N/mm) ≥ 4.5 3.2 3.5 All samples min peak value/ (N/mm) ≥ 3.9 2.4 2.9 Note: All samples max peak value is not more than 20N/mm. d. Straightness not more than 25mm Specification Belt width（mm） Cloth layer number Thickness of covering glue （mm） Working surface Non-working surface 400 3~4 4.5 3.0 3.0 1.5 500 3~5 4.5 3.0 3.0 1.5 600 3~5 6.0 4.5 3.0 3.0 1.5 650 3~5 6.0 4.5 3.0 3.0 1.5 800 3~6 6.0 4.5 3.0 4.5 3.0 1.5 1000 3~7 6.0 4.5 3.0 4.5 3.0 1.5 1200 4~7 6.0 4.5 4.5 3.0 1.5 1400 4~7 6.0 4.5 4.5 3.0 1600 4~7 6.0 4.5 4.5 3.0 1800 4~7 6.0 4.5 4.5 3.0 2000 4~7 6.0 4.5 4.5 3.0 2200 4~7 6.0 4.5 4.5 3.0 Refractory type conforms to GB10822-89 standard Physical properties of cover: Tensile strength of cover MPa ≥ 10 Elongation at break of overburden % ≥ 350 Note: The physical properties of the refractory zone with a thickness less than 2.0mm are not required Safety Performance Flame retardant performance J Non - combustible and conductive static properties K The average flame duration of the three full-thickness (longitudinal) samples was not more than 60S, and there was no reignition in any single result Flame retardant performance with J conducting electrostatic performance: the surface resistance is not more than 3 x 10 8 Ω Baoxiang EP Nylon Conveyor Belt Features: 1. Nylon canvas as the skeleton, with the same structure as ordinary conveyor belt and portable conveyor belt 2, with the belt body light, thin, high strength, fatigue resistance, impact resistance, good groove, long service life and other characteristics. Application: Suitable for conveying materials in medium and long distance, high load and high speed. nylon conveyor belt Varieties: according to the performance of the cover glue can be divided into ordinary type, heat resistant type, fire resistant type, cold resistant type, acid and alkali resistant type, oil resistant type. (1) Core material: NN100, NN150, NN200, NN300, NN400 (2) Bandwidth: 100mm-1800mm (3) Layer: 2-8 layers (4) Covering glue: Working face: 1.5-8mm Non-working face: 0mm-4.5mm Baoxiang is a multifunctional conveyor belt manufacturers that integrates production line development, manufacturing, debugging and technical transformation. Its products include conveyor belting, nylon conveyor belt, etc. Our website:www.baoxiangbelt.com

Oil Resistant Fabric Conveyor Belt oil resistant conveyor belt conveyor belt china manufacturer PRODUCT DESCRIPTION Baoxiang Oil resistant conveyor belt is suitable for transporting oily materials, such as cereal, grains, corn, fish, meat, soybean cake, or used in an environment exposed to working oil. Physical properties of rubber cover of Oil Resistant Fabric Conveyor Belt China Manufacturer a. Physical properties of rubber cover Type Tensile Strength/ MPa Breaking elongation/ % Abrasion loss/ mm3 LO ≥14.0 ≥350 ≤200 DO ≥16.0 ≥350 ≤160 Note：LO-used in general oily working conditions.DO-used in high abrasion & oily working conditions. After-aging properties of rubber conveyor belt(70℃×168h): Change rate of tensile strength and breaking elongation are both not more than 25% of before-aging values.   b. Oil resistant properties of rubber belt Serial number Test conditions of soak liquid Volume change rate/% ≤ Oil number in GB/T1690 Soak temperature/℃ Soak time/h LO DO 1 #2 oil 70±2 70+0/-1 +20 -5 2 #3 oil 70±2 70+0/-1 +50 +5 3 #3 oil 100±2 22±0.25 +50 +5 Note：You only need to choose one of the above three methods. Application: The common conveyor belt has poor tolerance to various oils and organic solvents. When transporting oil-bearing materials, the product's service life is shortened because of the swelling and erosion of oil-bearing materials to the adhesive, which increases the colloidal volume, loosens the structure, decreases the physical and mechanical properties.Oil resistant conveyor belt by cotton canvas, nylon canvas, polyester canvas, after rolling, molding, vulcanization and other processes refined, with better oil resistance, suitable for conveying oily materials, as well as some possible oily, chemical solvent occasions. Features: the coating adhesive is made of nitrile butadiene rubber with excellent oil resistance. The reinforcing material can be selected according to different needs of customers Baoxiang is a multifunctional conveyor belt manufacturers that integrates production line development, manufacturing, debugging and technical transformation. Its products include conveyor belting, nylon conveyor belt, etc. Our website:www.baoxiangbelt.com

Acid-alkali Resistant Conveyor Belt conveyor belt wholesaler material handling conveyor belt Baoxiang Acid and alkali resistant conveyor belt is a kind of working environment suitable for contact with acid and alkali. It is blended with rubber and plastic and filled with inert materials with excellent acid and alkali resistance. PRODUCT DESCRIPTION Acid-alkali Resistant Properties of Rubber Cover, Conveyor Belt Wholesaler Class Soak liquid Concentration Soak conditions(℃×h) Change rate of properties before and after soaking Volume expansion rate Change rate of tensile strength A1 Hydrochloric acid (HCl) 18% 50℃×96h ≤+10% ≥-10% A2 Sulfuric acid(H2SO4) 50% 50℃×96h ≤+10% ≥-10% A3 Sodium hydroxide(NaOH) 48% 50℃×96h ≤+10% ≥-10% Full-thickness tensile propertiesa. a. Full thickness, longitudinal tensile strength after-aging test reduces not lower than 30% of before-aging values. b. Full thickness, longitudinal elongation at reference force, not more than 4%. c. Longitudinal tensile strength, not less than the below table. (N/mm) Nominal belt type 160 200 250 315 400 500 630 800 1000 1250 1600 2000 2500 3150 Ply adhesion at normal temperature Item Ply to ply Rubber cover to ply All samples average value/ (N/mm) ≥ 4.5 3.5 All samples min peak value/ (N/mm) ≥ 3.9 2.9 Covered with rubber Index name Index Hardness（shor A）degree 55±5 Abrasion value/1.6cm,≤ 1.20 Tensile strength Mpa≥ 12.0 elongation at break %≤ 400 Acid resistance coefficient：(15-25℃,24h40%H 2 SO 4 ) ≥0.8 Through thickness Adhesive strength of tape and cloth Rubber cover＞ 1.5mm rubber cover≤1.5mm ≥3.2N/mm ≥2.8N/mm Interlaminar (longitudinal mean) bonding strength of adhesive tape ≥3.2N/mm Elongation at break (total) ≥10% Acid And Alkali Resistant Conveyor Belt Features: cotton canvas, nylon canvas or polyester canvas as the core, with good elasticity, good groove performance and low elongation. The coating adhesive made of acid-alkali resistant material has good chemical resistance and physical properties. Application: Suitable for conveying corrosive materials containing acid in a chemical plant, chemical fertilizer plant, paper mill, etc. Acid and alkali resistant conveyor belt (acid and alkali resistant conveyor belt) is suitable for a working environment in contact with acid and alkali, such as phosphate fertilizer manufacturing, seawater salt. An acid-alkali resistant conveyor belt (acid-alkali resistant conveyor belt) covering adhesive is made of rubber and plastic mixed and filled with material with excellent alkaline nature, which is better than neoprene in the acid-alkali resistant conveyor belt. The skeleton material adopts polyester canvas, which is more reliable than cotton canvas core belt in resisting acid and alkaline. Baoxiang is a multifunctional conveyor belt manufacturers that integrates production line development, manufacturing, debugging and technical transformation. Its products include conveyor belting, nylon conveyor belt, etc. Our website:www.baoxiangbelt.com

Cold-Resistant Conveyor Belts high elasticity conveyor belts impact resistance conveyor belt wear-resistant conveyor belt PRODUCT DESCRIPTION Product features: Cotton canvas, nylon canvas or polyester canvas is selected as the core, covering the natural rubber and butadiene rubber as the combined glue, with high elasticity, impact resistance, cold resistance and other characteristics, it can be normally used in the environment of the lowest -60 °C. Product usage: Suitable for conveying materials in cold areas, open refrigerated warehouses and other occasions Technical indicators: 1. Cold-Resistant Conveyor Belts can be divided into three types according to the performance of the covering glue: split-resistant (H) and wear-resistant (D) general type (L). 2. According to the cold resistance, it is divided into C1 and C2 levels.C1 operating environment temperature is -45°C-- +50°;The operating ambient temperature of C2 is -60°C-- +50°C Hebei Baoxiang Conveyor belt Manufacturing Co., Ltd. Is a medium-sized joint- stock enterprise leading in the production of "Baoxiang" special series conveyor belt, located in The Industrial zone of Liutuodian, Boye County, Hebei Province.Founded in 2010, it is a key enterprise of chemical industry in Hebei Province and a member of China Rubber Industry Association. Main production B6000mm under ordinary conveyor belt, nylon, polyester, raised edge conveyor belt conveyor belt, heat resistant, high temperature resistant conveyor belt, or circular conveyor belt, pattern conveyor belt (herringbone pattern, concave and convex decorative pattern, eight decorative pattern, fishbone, u-shaped pattern, cylindrical pattern, pitting pattern conveyor belt, etc.), PVC, PVG entire core flame retardant conveyor belt, acid and alkali resistant, oil resistant conveyor belt conveyor belt, steel wire laceration resistant conveyor belt, round tubular conveyor belt, rubber hose, spiral mesh conveyor belt, etc. If you are interested in rubber conveyor belts, please click here. https://www.baoxiangbelt.com