Acoustic Components

This kind of steel fiber can be made into 0.5 mm steel wire which has the best comprehensive effect, and the best combination of high strength, high flexural strength (more than 10 times continuously) and the strongest anchoring force. Its products can be the largest in the steel fiber family and are widely used in road bridge expansion joints and large-scale water conservancy and hydropower reinforcement projects. The Advantages of SDS-05035 0.50mm Diameter 30mm Length Hooked End Steel Fiber Easier operation and less time-consuming; High toughness and lower thickness; Integrated, no pores, more efficient; Less time used, and more economical; Compared with traditional concrete, concrete with hooked end steel fiber is more economical and efficient. USER'S GUIDANCE Dosage: depend on the application and minimum dosage is 20kg/㎥-70kg/㎥ Mixing: When pouring sand and aggregates into the hopper, mix an appropriate amount of loose steel fibers evenly, and then add cement. Put it in a mixing table, dry and mix for 2 minutes. If it is glued in rows of steel fibers, you need to add steel fibers after adding water so that the water can dissolve the bonding glue. Put the uniformly mixed fiber concrete into the conveyor and transport. Concrete pouring and laying should be compacted. The Safety & Packaging of SDS-05035 0.50mm Diameter 35mm Length Hooked End Steel Fiber Star Smith is a professional steel fiber manufacturer that can offer a wide range of steel fibre types that meets different needs. Packaging: 20kg or 25kg per bag/carton or as your requirements, there are 50 bags or 1000kg in a pallet, 24tons per 20'container. And the pallets should be waterproof, don't stack pallets on top of each other. Gloves and eye protection should be used when adding the steel fibers.

Minimum Order: 100

Micro steel fibers are made of copper coated steel wire, which is the most important materials of RPC and UHPC. UHPC has the features of very high strength, high tenacity, very good durability, and volume stability. It is a good and a new kind of construction materials. Micro steel fiber is widely used in the building of high way, expressway, RPC cover plates, and UHPC construction. Advantage of Brass Coated Micro Steel Fiber Performance Advantage With good dispersion performance in concrete; less impact in UHPC Liquidity and high tensile strength. Characteristic Advantage Providing good impact, fatigue, shrinkage control, and ductility in all kinds of concrete. Material Advantage Significantly improve the toughness of concrete. Specifications of Micro Copper Coated Steel Fiber Star Smith is a professional steel fiber manufacturer and supplier that able to offer many types of steel fibers used in concrete and other circumstances including glued steel fiber, loose end steel fiber, brass fibers, etc. Contact us to learn more about our steel fibers!

Minimum Order: 100

The steel fiber for concrete reinforcement is a new kind of metal material, in order to enhance concrete and shotcrete in its hardened state. Tengzhou SDS steel fibers make concrete have extremely high flexural strength and shear strength, and have good toughness, crack resistance, earthquake resistance, seepage control and other functions. Widely used in industrial factory floor, highway, high-speed rail, bridge, airport, tunnel, water conservancy, electric power, municipal engineering, etc. The steel fiber manufacturer has passed ISO9001 certification, and its products are exported to Southeast Asia, Europe, America and etc. The Formation of Steel Fiber Steel fibers are defined in ASTM A820 as pieces of smooth or deformed fibers that are sufficiently small to be dispersed at random in a concrete mixture. ASTM A820 designates tensile requirements, dimensions and permissible variations. There are mainly 4 steps for steel fibers based on our production process: Raw Material Dry Drawing Glued stampling & Forming The Benefits of Steel Fiber For the same mixing and construction, there is no need to add equipment or increase the construction cost. Under the same strength requirement, it can replace steel mesh and reduce the pouring thickness of concrete by 15-25%. Improve the construction conditions, mixing vehicles and construction personnel can reach the site directly, and shorten the construction period by 30%. Steel fiber reinforced concrete has high tensile strength, which can prolong the distance between contraction joints and facilitate continuous and rapid pouring of concrete. Convenient construction, saving labor, greatly shortening the construction period and saving the total project cost. The Working Principle of Steel Fiber Fibers reinforce in three dimensions throughout the entire concrete matrix. Fiber performance is based on the combination of the tensile strength, aspect ratio(length/diameter) and anchorage. The distributed fibers restrain micro- cracking and redistribute accumulated stress caused by applied loads and shrinkage. The sooner the crack is intercepted and its growth is inhibited, the less chance the crack will occur. FAQs of Steel Fiber What is steel fiber reinforced concrete? Fiber reinforced concrete is comprised of hydraulic cements containing fine and course aggregatea and fiber. A super-plasticizer is ofter used to enhance the mix workability. Fiber products are available in a variety of types and sizes. The underlying principle however on all fiber reinforced concrete is to provide discoutinuous reinforcement and effective crack control. How do fiber work? Fibers reinforce in three fimensions throughout the entire concrete matrix. Fiber performance is based on the combination of the tensile strength, aspect ratio(length/diameter)and anchorage. the distributed fibers resrain micro- cracking and redistribute accumulated stress caused by applied loads and shrinkage. The earlier a crack is intercepted and its growth inhibited, the less chace it will have develop. What are the types of steel fibers used in concrete ? 1.Straight 2.hooked 3.Crimped.4.Double duoform 5.ordinary duoform 6.paddied 7.enlarged ends 8.irregular 9.indented. Is there a difference between Micro and Macro Synthetic Fiber? Macro synthetic fibers are intended to carry a load and therefore, can be used to replace traditional reinforcement. Typical applicationss are: slabs on ground, shotcrete, precast and composit metal deck applications. Macro synthetic fibers are also used to eliminate both early and long term cracking. Micro fibers are generally utilized to minimize early age plastic shrinkage cracking and aggregate settlement that can occur within the first 24 hours.

Minimum Order: 100

MORNSUN is one of a power supply manufacturers in China. And MORNSUN 0.75-1W SIP/DIP regulated output dc dc converter offers single or dual output, and the isolated voltage of the series can up to 3000VDC, which is designed for applications where require compact size, high isolation, and low leakage current power, such as medical, electricity, IGBT driver and so on. We hope that those high-efficiency, excellent-quality, and cost-effective DC DC converter is an ideal fit for your application needs. We have dc dc power module , dc dc power supply module, dc dc converter module for consumers,so that they can directly know about this product. Besides, isolated dc dc converter module, isolated dc dc module is also supplied by us. More information, you can get from our web.

Minimum Order: 1 bags

The Details of Adhesive Backed Teflon Sheet Adhesive-backed Teflon sheet is made from PTFE fabric with pressure sensitive silicone adhesive on one side, the PTFE tape adhesive backed is a kind of Teflon sticky tape and it can resist temperature from -73-260℃. With heavy coating PTFE, this PTFE fiberglass tape offers optimal release property, overall thickness includes adhesive is 0.23mm, normally used as release sheet for the hot plate of laminating machine and as covering sheet for the rollers of dying machine and packaging machine. The adhesive-backed Teflon tape is normally coming out with yellow release paper on the back and different sizes can be slit and die-cut.We also offer self adhesive teflon sheet. The Advantages of Adhesive Backed Teflon Sheet Weather and aging resistant Withstand wide temperature range from -73-260℃(-100-500℉) 100% non-stick surface, easy to clean various grease, pastes, resins, paints Abstain from almost all chemicals, acid and organic solvents High insulation performance and low dielectric constant Non-combustible No residual adhesive on machine, easy to clean High tensile strength, low coefficient of friction UV, Infra-Red and microwave resistance Low Thermal Expansion: < 5% FDA approved, can be used in the food industry MUTIFLON is a professional self-adhesive Teflon tape/sheet manufacturer. We can supply you with high-quality self-adhesive backed PTFE tape/sheet. If you want to learn more about our PTFE Teflon sheet, contact us today! The Applications of Adhesive Backed Teflon Sheet As covering on the cylinder of various laminating machines as covering and release sheet on the cylinder in production of hook and loop Cover rotary drum in production of type cord fabric Stick on the floor to catch silicone oil drip during FPCB production Stick on a hot plate for UPVC window welding As mold release sheet on foaming mold machine

Minimum Order: 10 long tons