Chemicals & Plastics

PVC pneumatic hose is suitable for pneumatic device, gas flushing device, air compressor, engine parts, civil engineering equipment, orchard pesticide insecticide spraying and so on. PVC air hose is made of double-layer PVC material with strong toughness and advanced tensile polyester fiber reinforced wire, the product has pressure resistance, oil resistance, wear resistance, aging resistance  WORKING TEMPERATURE：-5°C ～+ 65°C • Packing: PVC transparent film, PE transparent film, PE fiber film • Sample: Free sample testing, can also be customized according to customer samples • Specifications: Can be customized according to customer requirements • Print on the tube wall: Can be customized according to customer requirements • Color: Can be customized according to customer requirements

Product Details: Alkali-soluble Polyester Chips for sea-island yarn spinning Alkaline Soluble Polyester Chips are a type of modified polyester, produced by incorporating hydrophilic groups into conventional polyesters. These products can hydrolyze in heated alkaline (or water) solutions. They primarily serve as the marine component in the production of sea-island yarns, where the sea portion is dissolved through alkali reduction, leaving behind the island structure. The segregation of sea-island components relies on the degree of polymer dissolution in alkaline solutions. When conjugated with high-shrinkage yarns, a superior suede effect is achieved, producing nanofibers with extensive surface area, high absorption, and efficient distribution and filtration capabilities. Features: The product characteristically hydrolyzes in hot alkaline (or water) solutions. Exhibits excellent spinnability and is quick to dry. Applications: Solo Spinning for Fiber: Primarily aimed at developing specialty textiles. Compound Spinning: Focused on producing ultra-fine sea-island POY and FDY, along with sea-island staple fibers. Applications of sea-island fibers mainly include fashion fabrics, and synthetic leather. Package & Storage: We provide packaging solutions adhering to international standards to ensure optimal storage, safety, and handling. Options include: HDPE Plastic Bags: 25 kg bag packing Jumbo Bags: 1000 kg capacity with moisture-proof liners Customized packaging is available upon request to meet specific requirements.

Minimum Order: 25

Product Details: Halogen-Free Flame Retardant Polyester Chip for Flame-Resistant Fibers & BOPET Film Our halogen-free Flame Retardant Polyester Chips offer a safe, eco-conscious solution for producing flame-resistant fibers and BOPET films. Free from harmful emissions, these chips contribute to cleaner manufacturing processes and end products. Product Features: Halogen-free composition for eco-friendliness. Phosphorus content ranges from 6000 to 15000 ppm. Excellent spinnability with intrinsic viscosity from 0.66 to 0.78. Supports production of fine denier fibers, including 0.5dpf and 150-288dty. Performance: Superior Limiting Oxygen Index (LOI) values exceeding 32 under UL94 standards. The LOI can be＞35 if improves phosphorus content Can reach VTM-0 grade for advanced fire safety. Applications: Ideal for fire-resistant fibers used in home textiles, automotive interiors, blackout materials, protective clothing, and luggage fabrics. Optimal for BOPET films, compatible with 250-micron thickness. Package & Storage: We provide packaging solutions adhering to international standards to ensure optimal storage, safety, and handling. Options include: HDPE Plastic Bags: 25 kg bag packing Jumbo Bags: 1000 kg capacity with moisture-proof liners Customized packaging is available upon request to meet specific requirements.

Minimum Order: 500

Product Details: Low Melting PET Chip is a specialized type of PET (polyethylene terephthalate) chip that has a lower melting point compared to standard PET chips. It is specifically engineered to exhibit reduced melting temperatures, allowing for easier processing and a wider range of applications. Used for Hot Melt Yarn Masterbatch, and extrusion Grade Polymer for Hot-melt Adhesive Glue Coating. Key Features: Lower Melting Point: enables faster and more energy-efficient processing during molding or extrusion, temperature to 90℃ -160℃ Compatibility: can be blended or co-extruded with other PET grades Saving cost: lower energy consumption and reduced processing time Application: produce low-melting point fiber, low-melting point synthetic fiber, and thermal- melting mucilage main raw material of masterbatch carriers extruded into the back coating of nonwoven, automotive interiors, foam, injection molding, PET sheets, and hot-melt adhesive/glue

Minimum Order: 25

CDP Characteristics: These are high-pressure cationic dyeable polyester chips, with dyeing conditions set at 120°C to 130°C and 0.13 MPa. Advantages of CDP: CDP fibers exhibit excellent color fastness and vibrant hues. They facilitate cross-dyeing, resist printing, and variation dyeing effects. ECDP Characteristics: ECDP chips vary in Tio2 content, offering both bright and semi-dull options. They can be dyed at standard cationic dyeable polyester chip conditions of 95°C to 100°C, under room temperature and pressure. Advantages of ECDP: With a higher sulfonic acid group content ranging from 2.5% to 7%, ECDP chips boast superior dyeability, allowing for deeper colors. They also excel in moisture absorption and possess certain anti-pilling properties. Applications: These chips are primarily used in the development of cellulose-like fibers. Through specialized post-spinning false twist processing, they can produce viscose and cotton-like fibers. They can serve as a partial substitute for nylon 6 fibers. Parameters: Item Unit CDP ECDP Intrinsic Viscosity dL/g 0.580 0.555-0.605 Melting point ℃ ≥250 240 – 250 carboxyl content mol/t ≤35 ≤50 Color （b value） 2±2 -2 – 6 Diethylene glycol content % ≤3.0 ≤4.0 The solvent ratio for viscosity testing is 60:40 (v/v) of pH to TCE Package & Storage: We provide packaging solutions adhering to international standards to ensure optimal storage, safety, and handling. Options include: HDPE Plastic Bags: 25 kg bag packing Jumbo Bags: 1000 kg capacity with moisture-proof liners Customized packaging is available upon request to meet specific requirements.

Minimum Order: 25

OPE (Oxidized Polyethylene) Wax is a versatile additive used in various industries. It acts as a lubricant, dispersant, and release agent, especially in plastic processing. OPE wax is commonly used in PVC, hot melt adhesives, paints, coatings, and textiles.  Plastic Processing:OPE wax is a popular lubricant in PVC products, helping to improve production efficiency and reduce costs. It's also used in PE, PVC cable materials, and PVC pipes.  Adhesives:OPE wax can enhance the bond strength and moisture resistance of hot melt adhesives.  Paints and Coatings:It can be used as a dispersant in water-based paints, improving gloss, smoothness, and scratch resistance.  Textiles:OPE wax can be used as a softener and anti-puncturing agent for textiles.  Other Applications:It's also used in car wax, leather auxiliaries, and as an internal dispersant in color processing.  Benefits:OPE wax can improve toughness, surface smoothness, and pass rates in plastic products. It also reduces power consumption during resin mixing and minimizes adhesion between resin and mold.  Key Properties:OPE wax has low viscosity, a high softening point, good thermal stability, and excellent external lubricity. 

HONGYE HOLDING GROUP CORPORATION LIMITED Can supply good quality melamine. Formula: C3N6N6 Molecular weight: 126.12 Melamine is mainly used for manufacturing melaminoformal dehyde resin, which is well water, heat & arc resistant and bright. It can also be used in decorative laminates, aminoplastics, adhesive agents, coatings and used as a paper reinforcing agent, textile auxiliaries, cement water-reducing agent and leather retaining agent etc. Specification: Appearance: white powder Purity(%): 99.8 min Moisture(%): 0.1 PH: 7.5-9.5 Ash content(%): 0.03 max kaolin turbidity, degree: 20 max coloruity(PT-Co)through, degree: 20 max

Minimum Order: 1000

HONGYE HOLDING GROUP CORPORATION LIMITED Can supply good quality thiourea. Thiourea Applications： 1. The main raw material of Thiourea dioxide. 2. Pharmaceutical raw material. 3. Used as rubber accelerator , floating agent , photo developing agent . 4. Used in resin compression molding powder electroplating blueprinting and boiler washing. 5.Bleaching agent in textile dyeing and printing, auxiliary of dyeing and anti-oxidant. Specification: Item standard Purity(%): 99.0 min Loss after heated(%): 0.40 max Ash content(%): 0.10 max Insoluble in water(%): 0.02 max CNS-%: 0.02 max Melting point(oC): 171

Minimum Order: 1000

HONGYE HOLDING GROUP CORPORATION LIMITED can produce 20000MT Sodium Formate per year. Sodium Formate Used in leather industry, serves as camouflage salt in the chrome tanning method. Used in catalyst and stabilizer compositions, and in the printing and dyeing of textiles as reducing agent. Used as the raw material in the manufacturers of sodium hydrosulfite, formic acid & Oxalic acid, etc. Physical & Chemical Features Appearance:white crystal powder Molecular formula: HCOONa CAS No: 141-53-7 Specification Grade Super purity grade High purity grade Qualified Grade Purity 98%MIN 97%Min 96%MIN NaOH 0.2%MAX 0.4%Max 0.6%MAX Na2CO3 0.3%MAX 0.8%Max 1%MAX NaCl 0.15%MAX 0.2%Max 0.25%MAX Na2S 0.02%MAX 0.02%Max 0.02%MAX Moisture 0.5%MAX 0.5%Max 0.5%MAX PH 9-10 9-10 9-10

Minimum Order: 1000

HONGYE HOLDING GROUP CORPORATION LIMITED can produce 20000MT Furfural per year. Furfural is used as a solvent in petrochemical refining to extract dienes (which are used to make synthetic rubber) from other hydrocarbons. Furfural, as well as its derivative furfuryl alcohol, can be used either by themselves or in together with phenol, acetone, or urea to make solid resins. Such resins are used in making fiberglass, some aircraft components, and automotive brakes. Physical & Chemical Features Byname: 2-furanur methyl alcohol, Furaldehyde Molecular formula: C5H4O CAS No: 98-01-1 UN No.: 1199 Dangerous goods class:6.1 Specification: Purity(%): 98.5 min Moisture(%): 0.2 max Acid( mol/L): 0.016 max Refractive index(D20 ): 1.524-1.527 Density (P20),g/cm3: 1.159-1.161

Minimum Order: 1000

Hongye Chemical Co., Ltd is the leading professional manufacturer and supplier of Thiourea Dioxide and pulp bleaching agent FAS. We can produce 50000MT Thiourea Dioxide(Formamidine sulfinic acid) &pulp bleaching agent FAS. Pulp bleaching agent FAS is one kind excellent pulp and paper bleaching agent, it can be used in reduction bleaching,waster paper deink bleaching. It is very stable in air and can be used under the normal equipments. Because of high reducibility and good stability, it is very suitable for high temperature continual bleaching, and there is good for environment, does not increase the waste water pollution load, conforms to the environmental protection requirements. Specification: Appearance: Odorless crystal powder. Purity: 99.0%Min Moisture:0.05%Max Iron(Fe):10ppm Max

Minimum Order: 1000

HONGYE HOLDING GROUP CORPORATION LIMITED Is the world’s largest production base of Furfuryl alcohol. We can produce 100000MT furfuryl alcohol per year. Industrial furfuryl alcohol is mainly used to manufacture furfuryl alcohol resin, which is used as binder of sand core of sand core of thermal core shooting box in precise foundry industry. Also furfuryl alcohol is used to manufacture tetrahydrofurfuryl alcohol, anti-corrosion coating, etc. and used as solvents, thinner or other organic raw material. Physical & Chemical Features Byname: 2-furylmethanol,2-furancarbinol Molecular formula: C5H6O2 CAS No: 98-00-0 UN No.:2874 Dangerous goods class:6.1 Specification: Item: Top quality Appearance: Colorless to light yellow color, transparent liquid Purity(%): 98.0 min Furfural(%): 0.7 max Moisture(%): 0.3 max Acid(mol/L): 0.01 max Density(P20)g/ml: 1.129-1.135 Refractive index(nP20): 1.485-1.488 Cloud point(oC): 10.0 max

Minimum Order: 1000

1 thiourea dioxide Hongye Chemical Co., Ltd is the leading professional manufacturer and supplier of Thiourea Dioxide and pulp bleaching agent FAS. We can produce 50000MT Thiourea Dioxide(Formamidine sulfinic acid) &pulp bleaching agent FAS. TDO is a new kind of reducing agent that used as exchange of sodium hydrosulfite. It is widely used in textile and paper making industry. This product is also used in leather processing industry, paper, pulp and board industry, photographic industry, bleaching and reducing agents. This product is also a component of decolorisation agents. In macromolecule material industry, it is used as catalysis agent and stabilizer of resinic producing, and it is also used in organic synthesization of sensitizing material, and medicine, medical, spicery materials in fine chemicals, and also can be applied in the recycling and separating of heavy metals. Physical & Chemical Features Byname: Formamidine Sulfinic Acid Molecular Formula:（NH2）2CSO2 PH 4 （1% Solution） CAS NO. 1758-73-2 or 4189-44-0 UN NO:3341 Dangerous Goods Class:4.2 Specification: Purity: 99.%Min Thiourea: 0.10%Max Moisture:0.05%Max Iron(Fe):10ppm Max Sulphate: 0.17%Max

Minimum Order: 1000

HONGYE HOLDING GROUP CORPORATION LIMITED produce 150000MT Sodium Percarbonate per year. Sodium Percarbonate offers many of the same functional benefits as liquid hydrogen peroxide. It dissolves into water rapidly to release oxygen and provides powerful cleaning, bleaching, stain removal and deodorizing capabilities. As Sodium Percarbonate is a kind of new high effective bleaching raw material for detergent, with advantage of no odor, no toxin, and no pollution. Due to the bleaching capacity of active oxygen released into the water, Sodium Percarbonate shows well performance. Sodium Percarbonate also is one disinfecting agent,it can kill coliform, staphylokinase, hepatitis bacterium and so on, therefore it is used as defecting agent in Hospital,Public Place,and to disinfected Medical Instrument, False Teeth, Fruit tools and Fruite and so on. Along with the development of aquiculture, usages of Sodium Percarbonate in such domains are increasing. Many detergent manufacturers home and abroad have being adopted Sodium Percarbonate as bleaching raw material instead of Sodium perborate or others. Physical & Chemical Features Byname:sodium carbonate peroxide Molecular formula:2Na2 CO3.3H2O2 CAS No:15630-89-4 UN No.:3378 Dangerous goods class:5.1 Specification: Item: Uncoated Coated Appearance: Free flowing white granule Free flowing white granule Active Oxygen: (%) 13.5 min 13.0 min Bulk density, g/l: 700-1100 900-1100 Moisture:(%) 2.0 max 2.0 max Iron(Fe):(%) 0.0015 max 0.0015max PH(3%water solution,20oC) 10.0-11.0 10.0-11.0

Minimum Order: 1000