Chemicals & Plastics

Water-soluble micronized waxes are mainly used to enhance the scratch resistance, abrasion resistance and surface smoothness of paints, printing inks and other materials, and at the same time have the characteristics of uniform dispersion, non-toxicity and environmental protection. Specific function Enhance scratch resistance and abrasion resistance Water-soluble micronized wax can significantly enhance the hardness and abrasion resistance of the surface of the paint film or ink, reduce the coefficient of friction, and avoid scratches and sticking. For example, it can be added to automobile paint and furniture paint to enhance the durability of the coating. Improve surface smoothness Its regular particle form can reduce friction resistance and give a smoother surface effect to the touch, suitable for surface treatment of plastic, metal and other materials. Enhance dispersion and stability Micronized wax is easy to disperse in water-based system, which can evenly mix pigments and fillers, prevent settling, and enhance the fluidity and stability of coatings or inks. Environmental friendliness and applicability Non-toxic, odourless and solvent-resistant, it is suitable for water-based coatings, inks and adhesives, especially for industrial scenarios with high environmental requirements.

USP - appointment to visit the facilities tank farm/ FOB tank to tank Dear ladies, dear gentlemen, We continue to add new facilities to our offering list. Please see below the latest one, a face to face table top meeting between the facility and the buyer's reps. Any serious buyer can schedule an appointment to visit the facilities tank farm to see and test the product for themselves. The facility will give physical Proof of Product on the ground. FOB TTT: 1. The buyer provides an ICPO along with their Company Registration Certificate or any valid ID and the TSA or CPA for verification and registration by the seller. 2. The seller issues a draft Commercial Invoice (CI), which the buyer signs and returns. Following this, the seller will issue an appointment letter for the TTM, to be signed by both the buyer and their logistics company, confirming their readiness to facilitate the TTM at the buyer's logistics terminal. 3. Upon confirmation of the TTM by the buyer's logistics company, the meeting takes place at the scheduled time and date, with the agenda including: a. Verification of identification proofs for all attendees. b. Buyer presenting Proof of Funds (POF). c. Seller presenting hard copies of POP and SGS documents for review, no later than 48 hours before inspection. d. Seller inspecting the buyer's designated tank/vessel to ensure readiness for seamless injection operations. 4. After the successful meeting and initial inspection, the buyer may conduct a dip test in the seller's tank at the buyer's expense. 5. The buyer completes the payment for the confirmed products as outlined in the CI. 6. The seller proceeds to inject the product into the buyer's tank and transfers ownership of the product as instructed by the buyer. The buyer then lifts the product. 7. The seller disburses payments to all intermediaries involved in the transaction. Monthly contract shipments continue as per the terms and conditions of the sales and purchase agreement between the buyer and the seller. We would like to reiterate that we will not be assigning any additional human resources to answer questions to the board in advance. Each applicant must first qualify by submitting their current application documents. Once these have been submitted, each applicant will be contacted directly by the facility within a maximum of 48 hours. It is not possible to optimize the application documents at a later date. Each applicant will only be given one chance, as we are inundated with qualified application documents almost every week.  The applicant must include the relevant text elements of this facility in their application documents so that the facility can see that the applicant has accepted the structure. We look forward to meeting your requirements and remain

Amorphous Hydrophilic Nano Sio2 Powder 112945 52 5 Silicon Dioxide HL-200 for Adhesive Coatings UPR Fumed Silica Classification:Silicon Dioxide Place of Origin:Hubei, China Other Names:Pyrogenic silica MF:O2Si EINECS No.:231-545-4 Grade Standard:Food Grade, Industrial Grade, Medicine Grade Appearance:White Nano-Scaled Powder Application:Food, Coating, Silicone rubber, cosmetic, UPR Brand Name:HIFULL Model Number:HL-200 Product name:Hydrophilic fumed silica HL-200 nano particle silicon dioxide Primary particle size:7-40 nm Country of Origin:China HS code:28112200 Purity:≥99.8% Advantage :ISO 9001, REACH certificates Type:nano materials One bag dimension:110cm*55cm*25cm Packaging Detail:multi-layered kraft paper bags of 10 kg/bag CAS NO: 112945-52-5

Minimum Order: 1 bags

HIFULL Factory Price HL-380 Pharmaceutical Grade Anti-Caking Agent Colloidal Anhydrous Silicon Dioxide (SiO2) Rubber Powder Classification:Chemical Auxiliary Agent Place of Origin:Hubei, China Other Names:Silicon Dioxide MF:O2Si EINECS No.:215-684-8 Grade Standard:Food Grade, Industrial Grade, Medicine Grade Appearance:White Nano-Scaled Powder Application:Printing & Ink; Coating; Sealants; Rubber Brand Name:HIFULL Model Number:HL-380 Specific surface area(BET):380±30m2/g pH in 4% dispersion:3.9~4.5 Loss on drying(2 hour at 105℃):≤2.5% Loss on ignition(2 hour at 1000°):≤2.5% Sieve residue(45μm):<250mg/kg Silica content(ignited material):≥99.8% Tamped density(2 hours at 105℃):40~60g/dm2 Type:nano materials One bag dimension:110cm*55cm*25cm Application:Printing& , Ink; Coating; Sealants; Rubber Packaging Detail:multi-layered kraft paper bags of 10 kg/bag Advantage : ISO 9001 CAS NO 112945-52-5

Minimum Order: 1 bags

HIFULL Factory Price HL-300 Pharmaceutical Silicon Dioxide Hydrophilic Fumed Silica Powder Colloidal Anhydrous Sio2 Classification: Chemical Auxiliary Agent Place of Origin: Hubei, China Other Names: Silicon Dioxide MF: O2Si EINECS No.: 231-545-4 Grade Standard: Industrial Grade, Medicine Grade, hydrophilic , can dissolve in water Appearance: White Nano-Scaled Powder Application: Printing & Ink; Coating; Sealants; Rubber Brand Name: HIFULL Model Number:HL-300 Product name:fumed silica 300 similar to A300 Type:nano materials primary particle size:7- 40 nm Purity:≥99.8% HS code:28112200 One bag dimension:110cm*55cm*25cm Packaging Detail:multi-layered kraft paper bags of 10 kg/bag Advantage : ISO 9001 CAS NO 112945-52-5

Minimum Order: 1 bags

HIFULL HB-620 Anti-Sagging Agent Hydrophobic SiO2 Fumed Silica Powder Silicon Dioxide for Coating Rubber Manufacturer Price Classification: Chemical Auxiliary Agent Place of Origin: Hubei, China Other Names: pyrogenic silica MF: O2Si EINECS No.:215-684-8 Grade Standard: Industrial Grade Appearance: White Nano-Scaled Powder Application: Printing & Ink; Coating; Sealants; Rubber,etc Brand Name: HIFULL Model Number: HB-620 Primary particle size: 7-40nm Country of Origin: China Package: multi-layer craft paper Advantage 1: factory price Purity: ≥99.8% Sample: free provided Type: nano materials One bag dimension: 110cm*55cm*25cm Product name: HB-620 Hydrophobic Fumed Silica Modified With HMDS Packaging Detail:multi-layered kraft paper bags of 10 kg/bag Advantage : ISO 9001 CAS NO 112945-52-5

Minimum Order: 1 bags

HB-630HIFULL Industrial Grade SiO2 Nano Silica Smoke White Carbon Black HB-630 Hydrophobic Fumed Silica Powder Reinforcing Agent Classification: chemical auxiliary agent Place of Origin: Hubei, China Other Names: Silicon Dioxide MF: O2Si EINECS No.: 215-684-8 Grade Standard: Industrial Grade Appearance: White Nano-Scaled Powder Application: Printing ink; Coating; Defoamer; Elastomer Brand Name: HIFULL Model Number: HB-630 Product name: hydrophobic fumed silica HB-630 Type: Nano Materials Primary particle size: 7 - 40 nm Treat method: HMDS treated One bag dimension: 110cm*55cm*25cm Origin of Country: China Advantage : ISO 9001. 14001 Packaging Detail:multi-layered kraft paper bags of 10 kg/bag CAS NO 112945-52-5

Minimum Order: 1 bags

It has good emulsification, dispersion, moisturing and decontamination capacity; Resistant to acid and alkali; Can be used to produce emulsifier, defoamer, solutizer and degreaser. PRODUCT DESCRIPTION Product Name:    Fatty Alcohol Ethoxylates CAS 37335-03-8 Pesticide Emulsifier AEO/JFC Series    Synonyms:    Fatty Alcohol Ethoxylates Ethoxylated Fatty Alcohols Fatty Alcohol Polyglycol Ethers Fatty Alcohol Polyoxyethylene Ethers Polyethylene Fatty Alcohol Ethers Fatty Alcohol Polyglycol Ethers    Chemical Composition:    Fatty Alcohol Ethoxylates+3EO,5EO,7EO,9EO    CAS Register No.：37335-03-8    Molecular Weight:  Not Available.  EINECS No.Not Available. HS Code:34021300 Structural Formula:Not Available.

Special phenethyl phenol formaldehyde resin polyoxyethylene ether / pesticide emulsifier monomer 400# / nonionic surfactant    English name:    Special Phenethyl Phenol Formaldehyde Resin Ethoxylates Pesticide Emulsifier 400# Series Nonionic Surfactant 400 series  chemical composition: Special phenethyl phenol formaldehyde resin polyoxyethylene ether  CAS registration number: no molecular weight: no molecular formula: no EINECS number: no HS code:  , 34021300 structural formula: no ionic: nonionic surfactant  We have manufacturing plants annual capacity 5000tons for CDBS(hydrous/anhydrous calcium salts); 5000tons capacity for nonionicsurfactant;10000tons capacity for Polycarboxylicacid cement water- reducer. Anionic Surfactant, Calcium Dodecyl Benzene Sulfonate CAS No.26264-06-2, Calcium Pheny Sulphonate 70 %, calcium salt, Ca LAB Sulfonate, oilfield auxiliary chemical, Phosphate Esters, Nonionic Surfactant, Organic Phosphorus Emulsifier, Castor Oil Ethoxylates, Fatty Alcohol Polyglycol Ethers, Polyethylene Fatty Alcohol Ethers, Pesticide Inert Ingredients, Polycarboxylate, Polycarboxylate Superplasticizer, Polycarboxylate Superplasticizer For Cement. Performance use: 1, special phenethyl phenol formaldehyde resin polyoxyethylene ether / pesticide emulsifier monomer 400 # / nonionic surfactant is brown or yellow brown viscous liquid.  2, special phenethyl phenol formaldehyde resin polyoxyethylene ether / pesticide emulsifier monomer 400 # / nonionic surfactant soluble in water and a variety of organic solvents.  3, special phenethyl phenol formaldehyde resin polyoxyethylene ether / pesticide emulsifier monomer 400 # / nonionic surfactant has excellent emulsification, dispersion, is the main monomer of compound emulsifier.    China Polyethylene Fatty Alcohol Ethers Quality Index:  model Exterior Moisture% PH value Cloud point (°C) HLB value Solid content% Remarks 401# Brownish yellow viscous liquid ≤0.5% 5.0-7.0 40-45 12-15 99.0 1% H 2 O 402# Brownish yellow viscous liquid ≤0.5% 5.0-7.0 66-70 12-15 99.0 1% H 2 O 403# Brownish yellow viscous liquid ≤0.5% 5.0-7.0 85-90 12-15 99.0 1% H 2 O 404# Yellow-brown viscous liquid ≤0.5% 5.0-7.0 93-97 12-15 99.0 1% H 2 O

Fatty acid polyoxyethylene ester series (fatty acid polyoxyethylene ester) / nonionic surfactant pesticide emulsifier    English name:  Fatty Acid Ethoxylates Cas 9004-96-0; 31943-11-0  Polyoxyethylene fatty acid/oleic acid Ethoxylated Fatty Acids Nonionic Surfactant Pesticide Emulsifier  Nonionic Surfactant Supplier:Hebei Sancolo Chemical Co.,Ltd chemical composition:    Fatty acid (oleic acid) polyoxyethylene ester  CAS registration number: 9004-96-0; 31943-11-0 Molecular weight: 502.72 Molecular formula: C28H54O7 EINECS number: 224-806- 9 ,  HS code: 3 4021300 Structural formula: No ionicity: Non Ionic surfactant  We have manufacturing plants annual capacity 5000tons for CDBS(hydrous/anhydrous calcium salts); 5000tons capacity for nonionicsurfactant;10000tons capacity for Polycarboxylicacid cement water- reducer. Anionic Surfactant, Calcium Dodecyl Benzene Sulfonate CAS No.26264-06-2, Calcium Pheny Sulphonate 70 %, calcium salt, Ca LAB Sulfonate, oilfield auxiliary chemical, Phosphate Esters, Nonionic Surfactant, Organic Phosphorus Emulsifier, Castor Oil Ethoxylates, Fatty Alcohol Polyglycol Ethers, Polyethylene Fatty Alcohol Ethers, Pesticide Inert Ingredients, Polycarboxylate, Polycarboxylate Superplasticizer, Polycarboxylate Superplasticizer For Cement. Performance use:   1. Fatty acid polyoxyethylene ester series (fatty acid polyoxyethylene ester) / nonionic surfactant Pesticide emulsifier is light yellow oil. 2, dispersed in water, soluble in hot ethanol, hot oil and benzene and xylene and other solvents, widely used as w / o type emulsifier. 3. In textiles, fatty acid polyoxyethylene ester series (fatty acid polyoxyethylene ester) / nonionic surfactant pesticide emulsifier is one of the lubricant components (mineral oil, fatty oil, solvent oil-soluble emulsifier). It is an antistatic agent for textile processing and production of synthetic fibers, and has good compatibility. 3. On leather, fatty acid polyoxyethylene grease series (fatty acid polyoxyethylene ester) / nonionic surfactant pesticide emulsifier is a softener and lubricant for tanned leather. 4. In the manufacture of inks, fatty acid polyoxyethylene ester series (fatty acid polyoxyethylene ester) / nonionic surfactant pesticide emulsifier is used as an emulsifier. When pigments and fats are used to prepare inks, the addition of this product allows the oil to be quickly emulsified. It is easy to knead and roll, which can improve the brilliance and lubrication fluidity of ink products. 5. Used as an emulsifier for cutting oil, an emulsifier and a dispersing agent for metal cleaning agents and detergent solvents in metal processing. 6. In pesticides, fatty acid polyoxyethylene ester series (fatty acid polyoxyethylene ester) / nonionic surfactant pesticide emulsifier is used as an emulsifier for insecticides. 

It has good emulsification stability and fluidity. It can be well adapted to wide range of water temperature and water quality. It can be used to formulate organic phosphorus and organochlorine emulsifier.  We have manufacturing plants annual capacity 5000tons for CDBS(hydrous/anhydrous calcium salts); 5000tons capacity for nonionicsurfactant;10000tons capacity for Polycarboxylicacid cement water- reducer. Anionic Surfactant, Calcium Dodecyl Benzene Sulfonate CAS No.26264-06-2, Calcium Pheny Sulphonate 70 %, calcium salt, Ca LAB Sulfonate, oilfield auxiliary chemical, Phosphate Esters, Nonionic Surfactant, Organic Phosphorus Emulsifier, Castor Oil Ethoxylates, Fatty Alcohol Polyglycol Ethers, Polyethylene Fatty Alcohol Ethers, Pesticide Inert Ingredients, Polycarboxylate, Polycarboxylate Superplasticizer, Polycarboxylate Superplasticizer For Cement. PRODUCT DESCRIPTION Product Name: Tristyrylphenol Ethoxy Propoxylates Block Copolyether Synonyms: pesticide Emulsifier 1600#（33#/34#） tristyrylphenol ethoxy propoxylates tristyrylphenol ethoxylates & propoxylates ethoxylated & propoxylated tristyrylphenol surfactant tristyrylphenol ethoxylate/propoxylate etho-propoxylated tristyrylphenol tristyrylphenol etho-propoxylates  Tristyryl phenol ethoxylated Chemical Composition: Tristyrylphenol Ethoxy Propoxylates Block Copolyether CAS Register No.: Not Available. Molecular Weight:  Not Available.Molecular Formula: Not Available.EINECS No.Not Available.HS Code:34021300Structural Formula:Not Available.

Castor oil ethoxylates is applicable to various emulsifiers, especially in organic phosphorus emulsifier, where it shows a prominent wetting and synergetic effect. Castor Oil Ethoxylates can be used as industiral emulsifier, penetrating agent, antifoaming agent, additive, foaming agent, stabilizer, lubricant, solubilizing agent, levelling agent, antistatic agent, washing agent, dispersing agent Castor Oil Ethoxylates Manufacturer:Hebei Sancolo Chemical Co.,Ltd Product Name: Castor Oil Ethoxylates-Pesticide Emulsifier BY/EL series Synonyms:  Castor oil ethoxylates PEG-35 Castor Oil;  Castor Oil polyoxyethylene ether; Polyoxyethyleneglycerol Triricino Polyoxyethylene castor oil ether Polyoxyethylene Castor oil ethoxylate< , br>cremophor EL castor oil ethoxylated polyoxyethylene castor oil Ethoxylated castor oil Usage: Castor oil ethoxylates is applicable to various emulsifiers, especially in organic phosphorus emulsifier, where it shows a prominent wetting and synergetic effect. Castor Oil Ethoxylates can be used as industiral emulsifier, penetrating agent, antifoaming agent, additive, foaming agent, stabilizer, lubricant, solubilizing agent, levelling agent, antistatic agent, washing agent, dispersing agent, parting agent, degreasing agent, plasticizing agent, thickening agent, viscosity conditioning agent and chemical intermediate.

1. Excellent burning performance Smoke-free and odourless: almost no black smoke and odour when burning, suitable for indoor use. Stable flame: the wax is pure and burns evenly, not easy to drip or collapse. Long burning time: high calorific value, more resistant to burning than ordinary paraffin wax. 2. Strong compatibility Easy to mix colour and aroma: good fusion with dyes and flavours, bright colour and long lasting aroma (5-8% of flavour is recommended). It can be mixed with other waxes: it can be compounded with soya wax, beeswax, coconut wax, etc. to adjust the hardness or reduce the cost. 3. Exquisite appearance Fine texture: smooth surface after cooling, no crystalline particles, suitable for high-end candle craft. Transparency is optional: some Fischer-Tropsch waxes are translucent, which can be used to make ice candles and other special effects. 4. High stability Strong oxidation resistance: it is not easy to yellow or produce rancid flavour after long-term storage. Good moisture resistance: low water absorption, not easy to deteriorate under humid environment.

Fischer-Tropsch waxes are used in candle manufacturing to improve product performance and reduce costs. Its properties include high purity, low viscosity, moderate melting point and good melting properties to optimise the burning characteristics and appearance of candles. Optimisation of combustion properties: Fischer-Tropsch wax burns with a stable flame and emits less black smoke, which effectively reduces pollution during the combustion process. Its high carbon content prolongs the burning time, making it suitable for religious ceremonies or emergency lighting scenarios. In addition, the stable molecular structure reduces the shrinkage rate when the candle cools down, reducing the problem of surface depression or unevenness. Enhancement of appearance: Fischer-Tropsch Oxide can make the surface of candles smoother, the colour more evenly dispersed, and present a brighter visual effect when burning, especially suitable for decorative candles. Cost reduction: Compared with natural wax, Fischer-Tropsch wax is cheaper and less expensive to add, which reduces raw material costs and improves production efficiency.