Connectors, Terminals & Contactors

Description : Connector : SMA R/A Jack PCB Mount Finished : Gold Our company manufactures a full range of RF connector products, including: 1) MMCX RF coaxial connectors 2) MCX RF coaxial connectors 3) SMA RF coaxial connectors 4) SMB RF coaxial connectors 5) TNC RF coaxial connectors 6) IPEX RF coaxial connectors 7) BNC RF coaxial connectors 8) UHF RF coaxial connectors 9) FME RF coaxial connectors We also have GPS Module, GSM Module, Bluetooth Module, 3G Module, GPS mouse, Personal Tracker, Vehicle Tracker, Bluetooth GPS Receiver, GPS Antenna, GSM Antenna, GPS/GSM Antenna, RF Cable, RF Connector etc.

Top Mount, SMT Type Stand off 4.0mm ELECTRICAL Current Rating: 0.5A per pin Voltage Rating: 50V DC Contact Resistance: 55mΩ max. Insulation Resistance: 500MΩ min. Dielectric Withstanding Voltage: 300VAC MECHANICAL Durability: 100 Cycle Insertion Force: 2.3Kgf max. Extraction Force: 2.3Kgf max. ENVIRONMENTAL Operating temperature range: -40℃~+85℃ Storage temperature range: -40℃~+85℃ SOLDER ABILITY Recommended IR Reflow Temperature: 260℃ 10Sec

Battery Contact Probe Test Pogo Pin BIP39 for Connector Application Battery contact probes are characterized by excellent conductivity, low resistance and high stability. They are mainly used for contact, connection and conduction, for example they can be used for connecting batteries or other electrical components. Battery contact probes are made from high-end materials. The specifications, outside diameters and tip styles vary considerably from probe to probe. Many common models are always kept in stock so as to meet the needs of various industries for bulk orders. A battery contact probe is often comprised of a barrel, a plunger and a spring. The barrel is usually manufactured from brass and phosphor bronze is an alternative for customization. The spring is often made from music wire and stainless steel is an alternative. The plunger is made from beryllium copper and high carbon steel is a custom-made choice. A whole probe is plated with gold in order to strengthen the conductivity. The products in this page are classified into BIP39 series of battery contact probes. The outside diameter is usually 3.89 mm and there are some common tip styles, for example J. For details, please check below parameters. Technical Specifications Recommended Minimum Center: 5.084 mm (200 mil) Current Rating: 3 Amps, continuous Contact Resistance: 40 milliohms (Maximum) Full Stroke: 2.6 mm Rated Stroke: 1.7 mm Spring Force: 113/ 255 gf (4/ 9 oz) Materials Contact Barrel: Brass, Gold Plated Spring: Music Wire, Gold Plated Plunger: Brass, Gold Plated For more information, please check below catalog. Company information: Centalic Technology Development Ltd. was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big- current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Our company owns professional R&D, production, sales teams under the working principle of 'quality, punctuality, confidentiality' to totally efficiently develop test probes in accordance with the requirements of customers' test projects and meet the needs of customers for mass production as well as developing markets. With many years' continuous endeavour of our staff, Centalic has built a solid foundation in this industry and our products have been sold all over the world. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal

Minimum Order: 100

Switch Probe Pogo Pin SWP164 for Electronic Test Switch probes are a kind of functional probes. They are used to determine the correct location of a terminal in a connector. They can also be used to determine the presence of nonconductive components, etc. Their application field is mainly as below Wire harness connector PCB component detection Door open-close switch Fixture component detection Automation process sensing Position and retention force Below switch probe we will introduce is SWP164. Its diameter is 1.64 mm and total length is 44.65 mm. As usual, switch probes do not entail very high currents, and this model SWP260 can work with the current up to 3 A. The typical maximum contact resistance of this model SWP164 is 160 mΩ. The materials used for the construction of switch probes are different for each component: The barrel is made of brass. Subsequently gold plated during the galvanic plating phase. The spring is made of gold plated music wire. The plunger is made of BeCu, then gold and nickel plated. The insulating sleeve is made of POM For details of SWP164 switch probe, please check below parameters. Technical Specifications Recommended Current Rating: 3 Amps, continuous Contact Resistance: 160 milliohms, maximum Full Stroke: 5 mm Rated Stroke: 3.3 mm Spring Force: 130 gf (4.5 oz) Normal Condition: Disconnecting between Plunger 1 and Plunger 2 Press down 1 mm: Continuity between Plunger 1 and Plunger 2 Materials Contact Barrel: Brass, Au on Ni Plated Spring: SWP, Au on Ni Plated Plunger 1: BeCu, Au on Ni Plated Plunger 2: BeCu, Au on Ni Plated Insulating Sleeve: POM For more information, please check below catalog. Advantages of this switch probe Reliable performance Low cost of test Best yield Our company are also able to change the head shape, total length and diameter, etc., of our switch probes to facilitate their use in different applications. The pitch of installation of switch probes depends on your specific needs. Company Information Centalic Technology Development Ltd was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switch probes, big- current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Our company owns professional R&D, production, sales teams under the working principle of 'quality, punctuality, confidentiality' to totally efficiently develop test probes in accordance with the requirements of customers' test projects and meet the needs of customers for mass production as well as developing markets. With many years' continuous endeavour of our staff, Centalic has built a solid foundation in this industry and our products have been sold all over the world. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal

Minimum Order: 100

Spring Loaded Pogo Pin Test Probe BIP70 Series for Battery Connector Battery contact probes are characterized by excellent conductivity, low resistance and high stability. They are mainly used for contact, connection and conduction, for example they can be used for connecting batteries or other electrical components. Battery contact probes are made from high-end materials. The specifications, outside diameters and tip styles vary considerably from probe to probe. Many common models are always kept in stock so as to meet the needs of various industries for bulk orders. A battery contact probe is often comprised of a barrel, a plunger and a spring. The barrel is usually manufactured from brass and phosphor bronze is an alternative for customization. The spring is often made from music wire and stainless steel is an alternative. The plunger is made from beryllium copper and high carbon steel is a custom-made choice. A whole probe is plated with gold in order to strengthen the conductivity. The products in this page are classified into BIP170 series of battery contact probes. The outside diameter is usually 1.7 mm and there are some common tip styles, for example J. For details, please check below parameters. Technical Specifications Recommended Current Rating: 3 Amps, continuous Contact Resistance: 50 milliohms (Maximum) Full Stroke: 3.5 mm Rated Stroke: 2 mm Spring Force: 230 gf (8 oz) Materials Contact Barrel: Phosphor Bronze, Gold Plated Spring: Music Wire, Gold Plated Plunger: Beryllium Copper, Gold Plated For more information, please check below catalog. Company information: Centalic Technology Development Ltd was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big- current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Our company owns professional R&D, production, sales teams under the working principle of 'quality, punctuality, confidentiality' to totally efficiently develop test probes in accordance with the requirements of customers' test projects and meet the needs of customers for mass production as well as developing markets. With many years' continuous endeavour of our staff, Centalic has built a solid foundation in this industry and our products have been sold all over the world. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal

Minimum Order: 100

Switch Probe Pogo Pin SWP298 Series for Electronic Test Switch probes is a kind of functional probes. They are used to determine the correct location of a terminal in a connector. They can also be used to determine the presence of nonconductive components, etc. Their application field is mainly as below Wire harness connector PCB component detection Door open-close switch Fixture component detection Automation process sensing Position and retention force Below switch probe we will introduce is SWP298. Its diameter is 2.98 mm and total length is 49 mm. As usual, switch probes do not entail very high currents, and this model SWP298 can work with the current up to 3 A. The typical maximum contact resistance of this model SWP298 is 50 mΩ. The materials used for the construction of switch probes are different for each component: The barrel is made of brass. Subsequently gold and nickel plated during the galvanic plating phase. The spring is made of SUS. One plunger is made of BeCu plated with gold and nickel. Another plunger is made of brass plated with nickel. The insulating sleeve is made of POM For details of SWP298 switch probe, please check below parameters. Technical Specifications Recommended Current Rating: 3 Amps, continuous Contact Resistance: 50 milliohms, maximum Full Stroke: 4.67 mm Rated Stroke: 2.5 mm Spring Force: 200 gf at load 2.5 mm Normal Condition: Disconnecting between Plunger 1 and Plunger 2 Press down 2 mm: Continuity between Plunger 1 and Plunger 2 Materials Contact Barrel: Brass, Au on Ni Plated Spring: SUS Plunger 1: BeCu, Au on Ni Plated Plunger 2: Brass, Ni Plated Insulating Sleeve: POM For details, please check below catalog. Advantages of this switch probe Reliable performance Low cost of test Best yield Our company are also able to change the head shape, total length and diameter, etc., of our switch probes to facilitate their use in different applications. The pitch of installation of switch probes depends on your specific needs. Company Information Centalic Technology Development Ltd was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switch probes, big- current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Our company owns professional R&D, production, sales teams under the working principle of 'quality, punctuality, confidentiality' to totally efficiently develop test probes in accordance with the requirements of customers' test projects and meet the needs of customers for mass production as well as developing markets. With many years' continuous endeavour of our staff, Centalic has built a solid foundation in this industry and our products have been sold all over the world. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal

Minimum Order: 100

Spring Pogo Pin Battery Contact Test Probe BIP94 for Connector Application Battery contact probes are characterized by excellent conductivity, low resistance and high stability. They are mainly used for contact, connection and conduction, for example they can be used for connecting batteries or other electrical components. Battery contact probes are made from high-end materials. The specifications, outside diameters and tip styles vary considerably from probe to probe. Many common models are always kept in stock so as to meet the needs of various industries for bulk orders. A battery contact probe is often comprised of a barrel, a plunger and a spring. The barrel is usually manufactured from brass and phosphor bronze is an alternative for customization. The spring is often made from music wire and stainless steel is an alternative. The plunger is made from beryllium copper and high carbon steel is a custom-made choice. A whole probe is plated with gold in order to strengthen the conductivity. The products in this page are classified into BIP94 series of battery contact probes. The outside diameter is usually 0.94 mm and there are some common tip styles, for example J. For details, please check below parameters. Technical Specifications Recommended Minimum Center: 1.27 mm (50 mil) Current Rating: 3 Amps, continuous Contact Resistance: 40 milliohms (Maximum) Full Stroke: 0.78 mm Rated Stroke: 0.7 mm Spring Force: 30 gf (1.05 oz) Materials Contact Barrel: Brass, Gold Plated Spring: Music Wire, Gold Plated Plunger: BeCu/SK4, Gold Plated For more information, please check below catalog. Company information: Centalic Technology Development Ltd was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big- current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Our company owns professional R&D, production, sales teams under the working principle of 'quality, punctuality, confidentiality' to totally efficiently develop test probes in accordance with the requirements of customers' test projects and meet the needs of customers for mass production as well as developing markets. With many years' continuous endeavour of our staff, Centalic has built a solid foundation in this industry and our products have been sold all over the world. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal

Minimum Order: 100

Switch Probe Test Pogo Pin SWP137 Series for Connection Switch probes is a kind of functional probes. They are used to determine the correct location of a terminal in a connector. They can also be used to determine the presence of nonconductive components, etc. Their application field is mainly as below Wire harness connector PCB component detection Door open-close switch Fixture component detection Automation process sensing Position and retention force Below switch probe we will introduce is SWP137. Its diameter is 1.37 mm and total length is 30.75 mm. As usual, switch probes do not entail very high currents, and this model SWP137 can work with the current up to 3 A. The typical maximum contact resistance of this model SWP137 is 80 mΩ. The materials used for the construction of switch probes are different for each component: The barrel is made of brass. Subsequently nickel plated during the galvanic plating phase. The spring is made of gold plated music wire. The plunger is made of BeCu, then gold and nickel plated. The insulating sleeve is made of POM For details of SWP137 switch probe, please check below parameters. Technical Specifications Recommended Current Rating: 3 Amps, continuous Contact Resistance: 80 milliohms, maximum Full Stroke: 4 mm Rated Stroke: 2.7 mm Spring Force: 150 gf (6.5 oz) Normal Condition: Disconnecting between Plunger 1 and Plunger 2 Press down 0.7 mm: Continuity between Plunger 1 and Plunger 2 Materials Contact Barrel: Brass, Nickel Plated Spring: Music Wire, Gold Plated Plunger 1: BeCu, Gold Plated Plunger 2: BeCu, Gold Plated Insulating Sleeve: POM For more information, please check below catalog. Advantages of this switch probe Reliable performance Low cost of test Best yield Our company are also able to change the head shape, total length and diameter, etc., of our switch probes to facilitate their use in different applications. The pitch of installation of switch probes depends on your specific needs. Company Information Centalic Technology Development Ltd. was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switch probes, big- current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Our company owns professional R&D, production, sales teams under the working principle of 'quality, punctuality, confidentiality' to totally efficiently develop test probes in accordance with the requirements of customers' test projects and meet the needs of customers for mass production as well as developing markets. With many years' continuous endeavour of our staff, Centalic has built a solid foundation in this industry and our products have been sold all over the world. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal

Minimum Order: 100

Gold Plated Switch Probe Test Pogo Pin SWP260 Series for Connection Switch probes are a kind of functional probes. They are used to determine the correct location of a terminal in a connector. They can also be used to determine the presence of nonconductive components, etc. Their application field is mainly as below Wire harness connector PCB component detection Door open-close switch Fixture component detection Automation process sensing Position and retention force Below switch probe we will introduce is SWP260. Its diameter is 2.6 mm and total length is 39.6 mm. As usual, switch probes do not entail very high currents, and this model SWP260 can work with the current up to 3 A. The typical maximum contact resistance of this model SWP260 is 50 mΩ. The materials used for the construction of switch probes are different for each component: The barrel is made of brass. Subsequently nickel plated during the galvanic plating phase. The spring is made of gold plated music wire. The plunger is made of BeCu, then gold or nickel plated. The insulating sleeve is made of POM For details of SWP137 switch probe, please check below parameters. Technical Specifications Recommended Current Rating: 3 Amps, continuous Contact Resistance: 50 milliohms, maximum Full Stroke: 5 mm Rated Stroke: 3.5 mm Spring Force: 130 gf (4.5 oz) Normal Condition: Continuity between Plunger 1 and Plunger 2 Press down 0.7 mm: Disconnecting between Plunger 1 and Plunger 2 Materials Contact Barrel: Brass, Nickel Plated Spring: Music Wire, Gold Plated Plunger 1: BeCu, Gold Plated Plunger 2: BeCu, Gold Plated Insulating Sleeve: POM For more information, please check below catalog. Advantages of this switch probe Reliable performance Low cost of test Best yield Our company are also able to change the head shape, total length and diameter, etc., of our switch probes to facilitate their use in different applications. The pitch of installation of switch probes depends on your specific needs. Company Information Centalic Technology Development Ltd. was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switch probes, big- current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Our company owns professional R&D, production, sales teams under the working principle of 'quality, punctuality, confidentiality' to totally efficiently develop test probes in accordance with the requirements of customers' test projects and meet the needs of customers for mass production as well as developing markets. With many years' continuous endeavour of our staff, Centalic has built a solid foundation in this industry and our products have been sold all over the world. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal

Minimum Order: 100

Battery Contact Probe Test Pogo Pin BIP48 for Connector Application Battery contact probes are characterized by excellent conductivity, low resistance and high stability. They are mainly used for contact, connection and conduction, for example they can be used for connecting batteries or other electrical components. Battery contact probes are made from high-end materials. The specifications, outside diameters and tip styles vary considerably from probe to probe. Many common models are always kept in stock so as to meet the needs of various industries for bulk orders. A battery contact probe is often comprised of a barrel, a plunger and a spring. The barrel is usually manufactured from brass and phosphor bronze is an alternative for customization. The spring is often made from music wire and stainless steel is an alternative. The plunger is made from beryllium copper and high carbon steel is a custom-made choice. A whole probe is plated with gold in order to strengthen the conductivity. The products in this page are classified into BIP48 series of battery contact probes. The outside diameter is usually 4.8 mm and total length is 6.8 mm. There are some common tip styles, for example J. For details, please check below parameters. Technical Specifications Recommended Minimum Center: 5.95 mm (235 mil) Current Rating: 5 Amps, continuous Contact Resistance: 30 milliohms (Maximum) Full Stroke: 2.15 mm Rated Stroke: 1.27 mm Spring Force: 23 gf (0.8 oz)/ 56 gf ( 2 oz) Materials Contact Barrel: Brass, Gold Plated Spring: Music Wire, Gold Plated Plunger: Brass, Gold Plated For more information, please check below catalog. Company information: Centalic Technology Development Ltd was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big- current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Our company owns professional R&D, production, sales teams under the working principle of 'quality, punctuality, confidentiality' to totally efficiently develop test probes in accordance with the requirements of customers' test projects and meet the needs of customers for mass production as well as developing markets. With many years' continuous endeavour of our staff, Centalic has built a solid foundation in this industry and our products have been sold all over the world. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal

Minimum Order: 100

1. Male connector, shell material is copper with chrome plated, contact pins material is brass with gold plated 2. Optional accessories, protective cover, chrome plated copper and rubber 3. O-rings for waterproofing 4. Female connector, black bakelite material, contact pins material is brass with gold plated 5, Housing of female connector, copper with chrome plated 6. cable sleeve 7. washer 8, Nut, copper with chrome plated, gripping the cable with 6&7 together for waterproofing, Notice: It is critical that all nuts are tightened after connection, otherwise the waterproofing effect may be adversely affected

LVDS Wire Harness, Car Accessories connector wire harness 20Pin 30Pin 40PIN 50 PIN LVDS cable for computer Monitor Products Description Product Name automotive wire harness assembly 30 51 pin LVDS cable for monitor Application Automation,Automobile,Me , dical,Optical Material plastic,PVC, copper or customized Similar type 20PIN/30PIN/40PIN/50PIN LVDS WIRING & CABLE Material Source Molex / JST / JAE / TYCO / I-PEX / HIROSE / HONDA applied to Products are widely applied to aotomotive LCD display, LCD TV , POS , IPC Computer, Projector, laptop, Digital Camera, Medical cable, Mobile ,Tablet PC FRS assembly, I-PEX micro-coax cable assembly, fine pitch micro coax cable, display cables, mcx cable, LCD panel cable, LCD LED Screen display cable, RF antenna cable assembly, KEL fine pitch micro coaxial cable, HD camera micro- coaxial cable assembly, and provide excellent quality LVDS cable, I-PEX cable, fine coaxial cable, eDP cable,I-PEX mini coax cable, sgc cable, custom LVDS cable assembly, fine pitch coaxial cable assembly, and tooling available for Hirose cable connector assemblies, JAE cable connector assemblies, Molex cable connector assemblies, IPEX cable connector assembly, Samtec cable connector assemblies, KEL cable connector assembly, JST cable connector assembly, Tyco cable connector assembly, TE cable connector assembly, Amphenol RF cable connector assembly, Micro Flex coaxial cable assembly and more. Welcome to contact us to custom or OEM.

Biodegradable Cold Cups The biodegradable cold drink cups are made through blow molding process, which can withstand heat up to 122°F. It can be used in soda water, milk tea and other occasions. Specifications of Biodegradable PLA Cold Cups Title PLA Compostable PLA Cup Product Name Biodegradable Cold Cups Application Cold drink, etc. Material PLA (Polylactic Acid) Temperature Range 14°F ~122°F Size 16 Oz / 500 ml Color Customized MOQ 500,000pcs Supply Ability 340,000 Sets/Day Package 500pcs/box Payment TT Shipment Port Shanghai Delivery Time About 25 to 45 days according to different quantity Features food contact safe biodegradable compostable disposable eco-friendly sustainable sturdy Now the price of biodegradable cold cups wholesale is affordable, if you have needs, please contact us. As one of pla packaging manufacturers, we will provide more high quality pla packaging products for sale, anything you need, please leave us a message.

Minimum Order: 1 bags

Pogo pin connector refers to a spring probe formed by the three basic components of a needle shaft, a spring and a needle tube after being riveted and preloaded by a precision instrument. Almost every pogo pin has its surface coating being gold- plated to promote its anti-corrosion function, mechanical performance, and electrical conductivity. And for pogo pin connector, it is composed of a pogo pin, different amounts of pins and housings. Pogo pin connector is generally used for precision connection in mobile phones, communications, automobiles, medical treatment, aerospace and other electronic products, which can improve the corrosion resistance, stability and durability of these connectors. As pogo pin connector is a very fine probe, its application in the precision connector can reduce the weight and volume of a precision connector the probe applied to, and thus enable the connector to be more fine and delicate in appearance.