Construction & Real Estate

Insulating glass consists of two or more pieces of glass sealed around the edges with an air space between. Insulated glass has energy saving, brightness adjustment, sound insulation and other effects, which can make our life more comfortable. Longyang insulated glass using high quality float glass and low-e glass, with aluminum and warm spacers, the glass is widely used for curtain walls and windows. Thickness is 10-70mm, size 300x500-2700*6000mm

Minimum Order: 100

GX-401 PVC Cazn stabilizer is a composite calcium-zinc stabilizer synthesized by our company using a one-step synthesis method. Due to the high-temperature synthesis method, this stabilizer does not have strong acidity, strong alkalinity and strong oxidizing properties. , is a weakly alkaline PVC stabilizer with relatively mild properties and will not corrode or damage equipment. It is widely used in extrusion, injection molding, calendering and other processes of PVC hard products. It has good demoulding properties, no precipitation, wide processing range and strong applicability. It can be applied to wire pipes, drainage pipes, corrugated pipes, water supply pipes, gusset plates, wall panels, wood plastic, foam boards, pipe fittings, special profiles, SPC floors, edge strips and many other products.

This product is a special stabilizer newly developed by our company for C-PVC product factories in recent years. The finished product has the characteristics of high stability (Main content is 44%), high lubricity, good flow and excellent mold release. It is especially suitable for the processing of C-PVC products with high viscosity, high processing temperature and long processing time. It is the market leader. The preferred stabilizer for C-PVC.(This stabilizer is pure material and does not contain calcium carbonate) Our PVC Stabilizer for CPVC is a high-performance thermal stabilizing agent developed specifically for chlorinated polyvinyl chloride (CPVC) applications. Known for its superior high-temperature resistance and excellent compatibility with CPVC resin, this stabilizer effectively controls thermal degradation, improves processing stability, and enhances the long-term performance of CPVC products such as hot water pipes, industrial pipe systems, and high-temperature fittings.

G-102 is a compound stable lubrication additive newly developed by Lianfu Company. Compared with G-108 and LG-09, its stability is slightly lower, but its lubrication is better, internal and external lubrication is balanced, and the later release is excellent. Mainly for high-calcium products, only G-102 lubricating stabilizer is added to the product, which not only replaces stability but also replaces lubrication. No need to add other lubricants. Especially for products with more than 100 parts of calcium powder, it has extremely excellent advantages. This product is suitable for all types of high calcium products, such as various types of pipes, plates, gussets, etc.

Our PVC stabilizer for foaming rigid products is specially formulated to deliver excellent stability, foaming performance, and surface quality for rigid PVC foamed materials. It is available in white or slightly yellow flakes or powder, which disperses evenly in PVC resin, ensuring uniform processing. This stabilizer is widely used in rigid PVC foamed sheets, panels, pipes, and profiles, providing consistent results for industrial and commercial applications. Key Features: Superior Low-Temperature Foaming: Enables uniform foaming at lower processing temperatures, reducing energy consumption. High Foaming Volume and Uniform Structure: Produces lightweight rigid foamed products with consistent density. Excellent Mold Release: Ensures smooth surfaces and reduces sticking in molds. Enhanced Thermal and Storage Stability: Maintains foam integrity during extrusion, molding, and storage. Bright and Consistent Appearance: Ideal for decorative rigid PVC panels, furniture, and construction materials. Cost-Effective: Provides high performance with lower additive dosage compared to traditional stabilizers. This PVC stabilizer for foaming rigid products offers exceptional low- temperature foaming, uniform foam structure, bright appearance, and lightweight properties, making it the ideal choice for manufacturers of rigid PVC sheets, panels, pipes, and decorative foamed products.

Appearance: White or slightly yellow flake or powdery material. Properties: This product is insoluble in water. Usage and performance: LF-01 is a lead salt stabilizer, which has been proven by the market for many years. It has the characteristics of promoting low-temperature foaming, large foaming volume, uniform foaming, good stability, good mold release and light weight of the product, and In the application of leather and shoe materials, the color is full and bright, and it is deeply loved by users; it is the first dedicated stabilizer in the industry. According to different calcium powder additions, the recommended dosage is: 1.2-2.OKG/100KG resin.

Ceiling tiles and framing as per attached surpluses in Georgia – US. It's 8 truckloads total. Ask is only 8.2% of the listed $1M wholesale price. https://drive.google.com/file/d/1nKue4XC3C , t9Ux_A21LiAAnBpvEsVZ3rb/view? usp=sharing More construction goods in clicking linked photos. www.ptexch.com/shop

Fiberglass flanges are indispensable key connecting components in fiberglass piping systems, used to connect and seal pipe sections to each other, and pipe sections to valves, pumps, or other equipment. There are two main types of fiberglass flanges, which differ in structure and performance: 1. Integral Flange Advantages: Highest strength: Integral molding, good structural integrity, and strong load- bearing capacity. No leakage path: Avoids the bonding interface, resulting in extremely high sealing reliability. Good fatigue resistance: Better able to withstand vibration and pressure fluctuations. 2. Adhesive Flange / Loose Flange Manufacturing process: The flange is manufactured separately from the pipe, and then a high-strength adhesive is used to bond the flange to the outer wall of the pipe.

Fiberglass horizontal storage tanks are made of glass fiber reinforced plastic and installed with their main axis parallel to the ground . They are typically manufactured as a single unit in the factory and then transported to the site for installation and use. The main manufacturing process involves fixed-length winding combined with hand lay-up to produce end caps and installation accessories. Structural design features Tank body : Cylinder : Typically manufactured using a winding process, primarily circumferential winding, to provide circumferential strength against internal pressure. Axial strength is provided by the superposition effect of multiple layers of cross-winding or circumferential winding. Heads : Typically elliptical or dished heads . This streamlined design facilitates stress distribution and provides significantly better pressure resistance than flat heads. Heads are mostly produced by hand lay-up or compression molding. Support system : This is one of the most critical components of a horizontal storage tank. Saddle bearing : the most commonly used type of support, usually consisting of two bearings. Fixed end support : One of the support has round bolt holes to secure it completely. Sliding end support : The anchor bolt holes of the other support are elongated holes, which allow the storage tank to expand and contract with temperature changes, preventing excessive thermal stress.

Fiberglass pressure tanks are among the most technologically advanced and demanding fiberglass products in terms of design and manufacturing requirements. They must not only withstand the weight of the medium under static conditions but also operate safely under internal pressure. Using fiber-reinforced plastic (FRP) as the primary material, they are sealed containers used for storing or handling pressurized fluids (gases, liquids). Their design and manufacturing must adhere to stringent pressure vessel standards (such as ASME X, NB/T 47012). Manufacturing Process  Fixed-length winding is the most important and advanced process for manufacturing fiberglass pressure vessels. Process: Under the control of a computer numerical control (CNC) system, continuous resin-impregnated fibers are precisely wound onto a rotating mandrel according to a preset line shape and thickness, followed by curing and demolding. Core Features: High specific strength: Lightweight yet with high pressure resistance. Excellent corrosion resistance: Resistant to various chemical media such as acids, alkalis, and salts, eliminating the need for linings and anti-corrosion coatings.

Quartz sand as a reinforcing material into the structural layer, based on FRP wound pipes . Their structure typically consists of: an inner lining (resin- rich layer for corrosion and seepage prevention) → a structural layer (glass fiber for strength) → a sand-filled layer (resin + quartz sand for rigidity and cost reduction) → an outer protective layer (anti-aging and anti- corrosion). Characteristics of FRP Mortar Pipe The design of fiberglass reinforced plastic (FRP) sand-filled pipes cleverly combines the advantages of multiple materials, giving them the following outstanding characteristics: 1. Extremely high stiffness and resistance to external pressure Core Purpose : The main function of the sand-filled layer is to significantly improve the ring stiffness of the pipeline . After the quartz sand is mixed with resin, a hard "composite mortar" layer is formed, which enables the pipeline to effectively resist the huge external pressure of soil load, ground live load (such as vehicles) and groundwater, preventing the pipeline from deforming and flattening. High design flexibility : By adjusting the thickness of the sand layer, FRP Mortar Pipes with different stiffness grades (such as SN5000, SN10000) can be flexibly produced to meet the requirements of different burial depths and geological conditions. 2. Excellent corrosion resistance FRP Pipe inherits all the corrosion-resistant advantages of fiberglass pipes. The inner lining consists of a high resin content and a surface felt, providing an excellent barrier against corrosion and seepage.

FRP Continuous Winding Pipe is a composite pipe manufactured using a continuous winding process. Compared to fixed-length wound pipe: Characteristic Continuous Winding Pipe Fixed-Length Wound Pipe Production Process Continuous, of arbitrary length Produced individually, with a fixed length (usually ≤12m). Production Efficiency Extremely high efficiency , suitable for large-scale standardized production. medium Pipe Diameter Range Typically medium diameter (DN200-DN2400) The widest range (from small to very large caliber) Length Length unlimited , reduce joints Fixed length, multiple joints Inner Surface Very smooth smooth Structural Features No longitudinal seams, high circumferential strength There are longitudinal and circumferential seams Main Advantages High efficiency, low cost, and unlimited length Highly flexible and capable of producing irregularly shaped parts

Henan Mine FEM standard electric wire rope hoist is a high-quality lifting device with a modular and intelligent design built to FEM and DIN standards. It delivers outstanding performance, reliability, and maintenance-free operation. Compared to European and US suppliers with higher labor costs, we offer both exceptional quality and affordable prices. With lifting capacity up to 20 tons, it provides higher lifting height than CD and MD models. It operates with low noise, is maintenance-free, and energy- efficient , utilizing premium components for precision and efficiency. Also, tailored configurations are available to meet specific user needs. Features Low headroom design minimizes clearance dimensions and maximizes usable workspace. Self-adjusting electromagnetic brake ensures quick, reliable braking with high precision and low noise.

Henan Mine jib cranes are designed for a seamless user experience offering accuracy, durability and minimal downtime. The Floor Mounted Jib Crane are easy to install and relocate,making them ideal for almost any kind of workstation. We offer a variety of models and structural types to suit different work sites and user needs. Several different ways to fix the jib to the wall or floor are available, along with different lifting mechanisms like chain hoists, wire rope hoists and manual hoists . With a load capacity of up to 10 tons, the pillar jib cranes offer 360-degree rotation to meet a diverse lifting requirements.