Electric Power Tools

Telescopic high-voltage conductor separated insulated pole is used to support different phases of conductors in live line work. The insulated support pole can be adjusted according to the line distance, it contains three fast conductor clip, which can hold up to three conductors. Hold on hot wire and release wire are simple and quickly.The main rod is made of high strength epoxy resin and pultrusion insulated tube. voltage resistance: 100kV/300mm, high mechanical strength, good insulated performance. It's safe and convenient to use. Product code 244001 Voltage class（kV）:10 Phase line distance（M）:0.6~0.8 Retracted length（M）:1.2 extended length（M):2.2 Weight (kg):3

Minimum Order: 1 bags

Personal security grounding wire is composed of 4 parts: pliers, cable, grounding wire and canvas bag, pliers used insulation handle, its safety and reliability. The cable is made of 99.99% pure copper without oxygen, with high purity and low resistance. The grounding clamp is made of aluminum alloy, which is strong and light in weight. Canvas bag is strong and wear-resistant, easy to carry. CODE Earthing set type mm2 Earthing wire dimension Accessories 527101 16 0.5M x 4pcs+2M 5 insulated hand pliers + 1 bag 527102 16 1.0M x 4pcs+1.5M 5 insulated hand pliers + 1 bag 527103 16 0.5M x 4pcs+2M 4 insulated hand pliers + 1 aluminum ground clamp +1 bag 527104 16 1.0M x 4pcs+1.5M 4 insulated hand pliers + 1 aluminum ground clamp +1 bag 527105 16 1.0M x 4pcs+3M 4 insulated hand pliers + 1 aluminum ground clamp +1 bag 527106 25 1.0M x 4pcs+3M 4 insulated hand pliers + 1 aluminum ground clamp +1 bag 527107 25 1.0M x 4pcs+5M 4 insulated hand pliers + 1 aluminum ground clamp +1 bag

Minimum Order: 1 bags

Features: 1.Matching screws and nuts, 10 mm diameter of the hole at the end,screw diameter of 8 mm. 2.Fine solder joint, welding deformation is small, weld has good crack resistance. 3.The product adopts high strength steel, the surface can be galvanized or copper- plated according to the need. 522001 Cold galvanized steel 800 x 16mm 522002 Cold galvanized steel 1000 x 16mm 522003 Copper-plated steel 800 x 16mm 522004 Copper-plated steel 1000 x 16mm 522005 Copper-plated steel +threaded 800 x 16mm 522006 Copper-plated steel +threaded 1000 x 16mm

Minimum Order: 1 bags

Performance Standard: DL/T879 -2004 for live working portable earthing and earthing short circuit device; Material requirements: wire clamp made of aluminum or copper alloy casting, good conductivity, holding firm. The insulating rod adopts high strength epoxy glass fiber pipe, which has high mechanical strength and good insulation performance. The handle is made of insulating rubber, non-slip and good grip.

Minimum Order: 1 bags

Portable earthing and earthing short-circuit are used for temporary earthing of electric power and rail transit during overhaul construction to ensure the safety of workers. Performance Standard: DL/T879 -2004 portable earthing and earthing short circuit equipment for live working； Material requirements: high purity copper wire, copper purity≥99.999% Technical parameters: the grounding wire is made of many strands of soft copper wire, the diameter of the single wire is not more than 0.2 mm, and the surface is covered with transparent insulating layer (including the grounding wire, where it is connected with the end clamp of the grounding wire) , the thickness of the protective layer is not more than 1.5 mm. The installation of the terminal adopts the secondary drawing process. The transparent sheath of the grounding line is installed in the pipe and the spring is added to form the secondary protection, therefore, the copper wire can not be broken during the use, and the transparent heat-shrinkable tube is used for the terminal sheath to observe whether the ground wire has been broken or not.

Minimum Order: 1 bags

Features: 1.High-quality copper raw materials, copper content of more than 99.7% . 2.Copper cable lug widening and thickening, high conductivity, fast heat dissipation, corrosion resistance. The model number is engraved on the front. 3.Copper cable lug have single hole, double hole connection, the front have model

Minimum Order: 1 bags

Our company grounding copper wire made by 0.2 mm diameter high-purity oxygen-free electrolytic copper wire multi-strands woven, copper purity of 99.9% , external by transparent PVC pipe insulation protection. The product has low resistance and large current carrying capacity, and is a special cable for portable short-circuit grounding wire in power system. Advantages: High copper content, purity of 99.9% . High conductivity, low resistance, low loss, strong current load. Covered with transparent insulating layer, waterproof, sunscreen, antifreeze, wear- resistant, anti-aging. Smart Printing: customizable, not easy to fade.

Minimum Order: 1 bags

The high-voltage discharge rod is made of new insulating materials. The portable retractable high-voltage discharge rod is convenient for use in various outdoor highvoltage tests, especially after the DC withstand voltage test, the charge accumulated on the test product is discharged to the ground to ensure personal safety. The retractable high-voltage discharge rod is easy to carry, convenient, flexible, small in size, light in weight and safe. 1.Resistance and Straight Dual-purpose Connection Type Discharge Rod 2.Resistance and Straight Dual-purpose Telescopic Discharge Rod

Minimum Order: 1 bags

Portable insulating tool holder is mainly used for temporary placement of tools on live work sites, the bracket is very convenient to place and access tools, the bracket can be folded, and it is convenient to handle.

Minimum Order: 1 bags

The Post Hole Digger is part of the Powerbreaker Insulated Digging Tools . This is the ideal tool for digging and scooping the earth out of post holes, the scissor-like action allows you to grip and remove the soil without making a mess. Product Features: One piece heavy duty fiberglass handle which tested with 100kV/300mm each by each and paint coated with epoxy ,The handle end covered with insulated rubber . The blade use alloy steel which were tempered for strength & rigidity.

Minimum Order: 1 bags

This is a simple, easy to use, portable glove inflator. The inflator provides a quality means of inspecting gloves in the field. The glove is secured to the inflator using a nylon strap and fastened with a hook and pile closure. Inflation is accomplished by pumping the bellows of the inflator against any surface.

Minimum Order: 1 bags

TID POWER multi-functional insulation clamp is made of small diameter high strength epoxy insulation pipe, the product is light weight, high mechanical strength, good insulation performance, the metal parts are made of aluminum alloy and stainless steel, the appearance is beautiful and does not rust, hand grip part of the design of the hand shape, comfortable grip. The unique ratcheting locking mechanism can keep the insulated clamp rod in an arbitrary holding state. The multifunctional insulating clamp is mainly used for gripping various tools on the live working line, mounting and fastening the shielding cover. Special attention: The Hand is forbidden to hold above the limit when using.

Minimum Order: 1 bags

TID POWER insulated clamp rod is made of small diameter high strength epoxy insulated pipe, the product is light weight, high mechanical strength, good insulation performance, the metal parts are made of aluminum alloy and stainless steel, the appearance is beautiful and does not rust, hand grip part of the design of the hand shape, comfortable grip. The unique ratcheting locking mechanism can keep the insulated clamp rod in an arbitrary holding state. The insulated clamp pole is mainly used for clamping or fixing the conductor, and the maximum can be clamped 240mm2 conductor. Special attention: The Hand is forbidden to hold above the limit when using. 219011 Total length mm:1500 Major rod dia.mm:26 Minor rod dia.mm:16 Max. Clamp wire dia.mm:240 Weight kg:1.9 219012 Total length mm:2500 Major rod dia.mm:26 Minor rod dia.mm:16 Max. Clamp wire dia.mm:240 Weight kg:2.5

Minimum Order: 1 bags

The wire pre-connecting insulating mounting rod is mainly used to fasten the lead line on the main lead line when the lead line is connected in live operation, which reduces the operation risk caused by the sloshing of the lead line and the lead line when the lead line is fixed in the clamp, easy and fast operation, high security. When working, just put the drain wire into the wire clip at the lower part of the operating head of the mounting rod in advance, tighten the screw to lock the wire, then hang the installation on the main wire, and then pull the mounting rod down, the lower part of the operating head of the installation bar will move up to the main line, and then clockwise screw the installation bar, the top of the drainage line clamp will lock the main line. After installing the clamp connecting the main lead to the drain line, the gun operator can be used to loosen the drain line by twisting the clamp lock ring of the lock drain line on the mounting rod. Then turn the mounting rod counterclockwise, loosen the locking mechanism of the mounting rod on the main lead wire, and push the mounting rod upward. The wire clamp at the lower part of the operating head of the mounting rod will move down, loosen the clamping on the main lead wire, and withdraw the mounting rod, live wire connection work completed.

Minimum Order: 1 bags