Other Electrical Powered Tools

610201 Strand wire(100mm²) Steel core aluminium stranded wire(400mm²) Maximum opening（32mm) Insulated handle length（460mm) Total product length（550mm) 610202 Strand wire(120mm²) Steel core aluminium stranded wire(720mm²) Maximum opening（50mm) Insulated handle length（480mm) Total product length（650mm)

Minimum Order: 1 bags

The main structure of the fully insulated scaffold (platform) is a high-strength insulating tube made of fiberglass and epoxy resin (EP). It is built by a ladder frame,a horizontal connecting rod and a diagonal connecting rod, and a support rod plus an insulating platform board. The insulating scaffold (platform) is quick to build,easy to disassemble and assemble, without any installation tools, and convenient to use. It has high mechanical strength, Excellent insulation performance, high flexibility, safety and stability, fast disassembly and assembly, non-conductive,anti-oxidation, corrosion resistance, non-sparking, etc. It is suitable for a variety of live construction sites and high-altitude live operations. It makes up for the inability of insulated bucket trucks to enter the site Insufficient construction.

Minimum Order: 1 bags

Insulated Scaffolding which are made by fiberglass reinforced plastic, are used for live line inspection at Power substation. 1.Main material： 1.1 Frame : Foam filled fiberglass tube in Orange. 1.2 Plat : Insulation board. 1.3 Strengthen Bar: Foam filled fiberglass tube in Orange. 1.4 Joint Part:High Aluminium Alloy 1.5 Joint Part:High Aluminium Alloy 2. Character: 2.1 It is made by foam filled tube,so that can keep the moisture out . 2.2 It can be used up to 800kV. 2.3 High Mechanical resistant to bending and twist 2.4 It can be afford 300KG weight. 2.5.High Resistant to bad weather and corrosion element 2.6 easy to assemble and to move. 3. Sizes of 2 types of the modules，Customized Model Available as well: - 1m x 1m modules - 1m x 2m w/ 5 pins modules 4.Foot Type：We have two type Adjusted and Movable of Insulated Scaffolding foot.

The insulated centipede type ladder is named after shaped like a centipede,the characteristics are that this ladder is based on the straight rod as the center pillar, and the main mechanical load and insulating strength are carried with the insulated stretching rope,The parallel settings of the insulated crossbar are used as a ladder to run through the rod,they are mainly carry the weight of climbing staff.Compared with the ascending method of conventional live operations, the insulated centipede type ladder can adapt to a variety of terrain operations,it can solve the problems that the power-based operating vehicles and machinery cannot enter the operating area caused by inconvenient road traffic, such as the fields area,hillside area, grass area,etc.This ladder is not highly required for the geographical conditions of the operation site. The weight of this ladder is light, easy to carry, convenient operation.It’s expand the new way to board the power operation. The feature of the product： 1. The trunk is made of high-strength epoxy weaving and pulling insulated tube. It has good insulated performance, high strength, good rigidity and small offset under load. 2. The ladder pedal can be made of circular insulated tube or Reuleaux triangle insulated tube, good insulated performance, high mechanical strength, Reuleaux triangle insulated tube foot stepping on the contact surface, comfortable feet when climbing. 3. Insulated wind rope adopts insulated nylon rope or insulated silk rope, with good insulated performance and high stretch strength。 4. The structure design of the insulated centipede ladder is a segmented plug-in locking type, with a mounting base at the lower end to fix the rod body. Each section of the structure about 3M, and the foot pedal is fixed. It is equipped with a waterproof and moisture-proof insulated bag, which is easy to carry.。 5. This ladder can be equipped with insulated work platform, and staff can stand on the insulated work platform to work, which greatly improves the comfort of the operation。 6. The main insulated tube is yellow, and the ladder pedaling tube is fluorescent green or yellow。

Insulated hook ladder has many applications in high-voltage maintenance, which can position the line workers in the most advantageous working position and carry out line repairs in almost inaccessible places. All hooks are made of tempered steel with a diameter of 26mm and can rotate to best accommodate various angles on the structure. The steel chain is clamped onto the hook to help secure the ladder to the bracket. The crossbar material for both rated ladders is 32mm epoxy glass coated with a sand layer. Features 1. Designed to effectively, position linemen for high-voltage maintenance,make line repairs possible, even in inaccessible places 2. Hooks are formed from 26mm diameter tempered steel, these hooks can be swiveled to best various angles on structure 3. Ladders include hooks and steel chains, the steel chains clip to hooks to assist in securing ladder to support, rung material for both rated ladders are 32mm sand- coated Epoxy fiberglass rod,it has excellent anti slip performance. 4. Length can be customized.

Telescopic fiberglass ladders are widely used for city power line urgent repair ,Substation Inspection and other linemen works.It is the necessary tools for utility,company,hotel,family and so on. 1. The advantage of the telescopic fiberglass ladders Light weight, good insulation performance ,anti slip , corrosion resistant and small package which can put into the car. 3.Safety note: 1.Please inspect the ladder carefully with all the parts in the good condition. 2.Please make sure install the ladder on the hard and flat ground to preventing any dangerous caused by slanting. 3.Please be careful when you use the ladder in the windy day. 4.Please don’t put over weight on the ladder. 5.Please keep the stand on the middle of the ladder to avoid lost balance when you on the ladder. 6.Please don’t move the ladder when the person on it. 9.Please don’t put your hand on the steps when retract the ladder. 10.Please note only one person allowed on the ladder the same time. 11.Please stock the ladder in the dry,ventilate room .

Minimum Order: 1 bags

Main Character： 1.No special tools required for installation, no need crimping operation. 2.Automatic Splice is tension-dependent device that the line must have at least 10% of the rated breaking strength during installation to ensure reliable electrical connection. 3.The current passes through the wire to the metal crucible, flows through the metal crucible to pass the current to the outer casing, and the outer casing transmits the current to the metal crucible, which is transmitted from the metal crucible to the conductor. 4.The loop resistance of the Automatic Splice is not more than 1.1 times the loop resistance of the isometric conductor. The metal crucible can penetrate the residual oxide layer on the surface of the conductor ,so that electrical conductivity is Reliable.

Minimum Order: 1 bags

TID POWER Insulated bypass jumper adopts soft insulated conductor to pass through the support pipe of middle high strength epoxy insulated tube. The clamp design of both ends is suitable for glove operation and insulation rod operation. Insulated by-pass jumper is mainly used for 15kV by-pass operation when temporarily connected to the conductor.

Minimum Order: 1 bags

Insulated jumper wire set is used to bypass work areas during line upgrades and temporary or emergency repairs. 1. Compliant with: ASTM F2321 standard 2. When installing and removing jumper clamps, appropriate rubber insulation must be worn to clear the blockage.

Minimum Order: 1 bags

Senix push mower features a high-efficiency brushless motor for extended runtime, mowing up to 600m² on a single charge. It has a foldable handle for easy storage and a 55L grass bag with a full collection indicator. The 7-position height adjustment allows for cutting heights from 25-80mm (1″-3″), and its self- propelled rear-wheel drive system ensures effortless operation on large or sloped lawns. https://www.senix.co/products/volt-x , 2/40v-brushless-46cm(18in)-self-propelled- lawn , mower-375.html#list

Senix lawn mower offers a 5-position height adjustment for cutting grass from 25-65mm. Its compact design features a folding handle for easy storage and a stand-on structure for convenient grass bag management. Equipped with a 4.0 Ah battery, it has a 32 cm cutting width, perfect for lawns up to 150 m² on a single charge. The 30L grass bag easily detaches for quick disposal of clippings. 5-position height adjustment lever tailors grass cutting height from 25-65mm The folding handle and an additional carry handle make it easier for storage Stand On Structure Design Which is convenient for users to take and place the grass bag and dump the grass Packed with one 4.0 Ah battery, and a cutting width of 32 cm, the mower is powerful enough with extra longer runtime for any gardens and lawns up to 150 m² on a single charge 30L grass bag with Full collection indicator conveniently detaches to dispose of grass clippings https://www.senix.co/products/vol , t-x2/x2-outdoor-power-equipement/x2-18v- cordle , ss--32cm(12.6'')-lawnmower-840.html#list

3/4 in. anvil with friction ring for quick socket changes 3-speed selector switch Offers greater control over a wide range of fastening applications LED light to illuminate the work area Brushless motor provides maximum power,extended runtime,and longer motor life Improved over mold with customized micro texture For optimum grip and user comfort Lithium-ion packs perform better, last longer and weigh less https://www.senix.co/products/volt-x2/ , power-tools/20v-brushless-19mm--impact- wrench- , 496.html#list

TID POWER insulated cross-arm connecting rod is made of highstrength epoxy insulated pipe, and the metal parts at both ends are locked on the insulating pipe by pressing process, so the tensile strength is high. The connecting rod of the insulating cross-arm is mainly used for connecting the tension tool and the cross-arm when the wire is tightened.

Minimum Order: 1 bags

Used to lift distribution transformers and equipment onto structures。 1. Installed on the live line pole. 2. Rated lifting capacity can up to 900kg, including load and pull rope tension. 3. With a 50mm wide and 1.4m long polyester belt. 4. Main body is a 67mm diameter high quality foam filled fiberglass tube, 0.66m long. 5. Wide handle for easy opening, insulated gloves for quick operation of ratchet wheel 232101 Main parts:Φ67mm foam filled fiberglass tube,length:660mm, Belt: Polyester belt 50mm × 1400mm Base: Standard 900kg 8.20kg

Minimum Order: 1 bags