Other Electrical Powered Tools

Main Character： 1.No special tools required for installation, no need crimping operation. 2.Automatic Splice is tension-dependent device that the line must have at least 10% of the rated breaking strength during installation to ensure reliable electrical connection. 3.The current passes through the wire to the metal crucible, flows through the metal crucible to pass the current to the outer casing, and the outer casing transmits the current to the metal crucible, which is transmitted from the metal crucible to the conductor. 4.The loop resistance of the Automatic Splice is not more than 1.1 times the loop resistance of the isometric conductor. The metal crucible can penetrate the residual oxide layer on the surface of the conductor ,so that electrical conductivity is Reliable.

Minimum Order: 1 bags

TID POWER Insulated bypass jumper adopts soft insulated conductor to pass through the support pipe of middle high strength epoxy insulated tube. The clamp design of both ends is suitable for glove operation and insulation rod operation. Insulated by-pass jumper is mainly used for 15kV by-pass operation when temporarily connected to the conductor.

Minimum Order: 1 bags

Insulated jumper wire set is used to bypass work areas during line upgrades and temporary or emergency repairs. 1. Compliant with: ASTM F2321 standard 2. When installing and removing jumper clamps, appropriate rubber insulation must be worn to clear the blockage.

Minimum Order: 1 bags

Senix push mower features a high-efficiency brushless motor for extended runtime, mowing up to 600m² on a single charge. It has a foldable handle for easy storage and a 55L grass bag with a full collection indicator. The 7-position height adjustment allows for cutting heights from 25-80mm (1″-3″), and its self- propelled rear-wheel drive system ensures effortless operation on large or sloped lawns. https://www.senix.co/products/volt-x , 2/40v-brushless-46cm(18in)-self-propelled- lawn , mower-375.html#list

Senix lawn mower offers a 5-position height adjustment for cutting grass from 25-65mm. Its compact design features a folding handle for easy storage and a stand-on structure for convenient grass bag management. Equipped with a 4.0 Ah battery, it has a 32 cm cutting width, perfect for lawns up to 150 m² on a single charge. The 30L grass bag easily detaches for quick disposal of clippings. 5-position height adjustment lever tailors grass cutting height from 25-65mm The folding handle and an additional carry handle make it easier for storage Stand On Structure Design Which is convenient for users to take and place the grass bag and dump the grass Packed with one 4.0 Ah battery, and a cutting width of 32 cm, the mower is powerful enough with extra longer runtime for any gardens and lawns up to 150 m² on a single charge 30L grass bag with Full collection indicator conveniently detaches to dispose of grass clippings https://www.senix.co/products/vol , t-x2/x2-outdoor-power-equipement/x2-18v- cordle , ss--32cm(12.6'')-lawnmower-840.html#list

3/4 in. anvil with friction ring for quick socket changes 3-speed selector switch Offers greater control over a wide range of fastening applications LED light to illuminate the work area Brushless motor provides maximum power,extended runtime,and longer motor life Improved over mold with customized micro texture For optimum grip and user comfort Lithium-ion packs perform better, last longer and weigh less https://www.senix.co/products/volt-x2/ , power-tools/20v-brushless-19mm--impact- wrench- , 496.html#list

TID POWER insulated cross-arm connecting rod is made of highstrength epoxy insulated pipe, and the metal parts at both ends are locked on the insulating pipe by pressing process, so the tensile strength is high. The connecting rod of the insulating cross-arm is mainly used for connecting the tension tool and the cross-arm when the wire is tightened.

Minimum Order: 1 bags

Used to lift distribution transformers and equipment onto structures。 1. Installed on the live line pole. 2. Rated lifting capacity can up to 900kg, including load and pull rope tension. 3. With a 50mm wide and 1.4m long polyester belt. 4. Main body is a 67mm diameter high quality foam filled fiberglass tube, 0.66m long. 5. Wide handle for easy opening, insulated gloves for quick operation of ratchet wheel 232101 Main parts:Φ67mm foam filled fiberglass tube,length:660mm, Belt: Polyester belt 50mm × 1400mm Base: Standard 900kg 8.20kg

Minimum Order: 1 bags

This Fall Restraint (Anchor Point Tool) adopts moisture-proof small-mouth closed- cell foam filled high-strength epoxy glass fiber tube as the insulating body, equipped with U-shaped hanging ring, and light weight and highstrength aviation aluminum pole base and nylon ratchet holding rod locking system. This product can be used to fix the safety belt of line workers, and connect the anti-dropping device or light industrial equipment. Features: • The design meets the load of 250kg, and the insulation distance is 160mm; •Large U-shaped bolts are convenient for the operator to pass through the lifting ring easily; • 50mmx1300mm nylon belt ratchet assembly can be quickly and easily connected to the pole

Minimum Order: 1 bags

Heavy Duty type Light Duty type The FRP temporary crossbar is made of moisture-proof small closed-cell foam filled with high-strength epoxy fiberglass tube as the insulating body, equipped with an insulated O-lock clamp, as well as a lightweight high-strength aviation aluminum holding rod base and nylon with ratchet holding rod locking system. The product has the characteristics of good insulation performance, high mechanical strength, small weight and easy installation and is widely used in temporary wire support tools when working with electricity. Product Features: • Quick installation and removal • The pawl connector has a spacious handle for easy operation with rubber gloves • 50 mmx1300mm nylon strip, can adapt to most pole structure (Note: Belts with wear belts need to be checked regularly)

Minimum Order: 1 bags

The insulated four-legs cable support frame is mainly used to support the cable when the work-live. The bottom four-pin support of the design is safe and stable. The middle adopts the telescopic design, which can flexibly adjust the height of support. The top adopts the buckle type spiral insulated hoop, which is convenient to add the cable. This product is light weight, the whole body can folding, easy to carry,with the moisture-proof insulated bag. The features of product： 1. The main body of the support frame is made of high strength epoxy insulated braid and pultrusion tube, which has light weight, high strength and good insulated performance. 2. The supporting frame structure design uses telescopic and folding , which is convenient for storage and carrying. 3. The cable clamps of this supporting frame uses a buckle spiral insulated hook, which is convenient to operate and saves time. 4. The main body of the product is yellow, the insulated accessories are black, the color is eye -catching and the design is beautiful. 241011 The extend height（M）:2 The height retracted（M）:1.1 The Cable clamp diameter of（mm）:50 cable clamps:1 load-bearing（kg):10 241012 The extend height（M）:2 The height retracted（M）:1.1 The Cable clamp diameter（mm）:50 cable clamps:3 load-bearing（kg):30

Minimum Order: 1 bags

Telescopic high-voltage conductor separated insulated pole is used to support different phases of conductors in live line work. The insulated support pole can be adjusted according to the line distance, it contains three fast conductor clip, which can hold up to three conductors. Hold on hot wire and release wire are simple and quickly.The main rod is made of high strength epoxy resin and pultrusion insulated tube. voltage resistance: 100kV/300mm, high mechanical strength, good insulated performance. It's safe and convenient to use. Product code 244001 Voltage class（kV）:10 Phase line distance（M）:0.6~0.8 Retracted length（M）:1.2 extended length（M):2.2 Weight (kg):3

Minimum Order: 1 bags

Personal security grounding wire is composed of 4 parts: pliers, cable, grounding wire and canvas bag, pliers used insulation handle, its safety and reliability. The cable is made of 99.99% pure copper without oxygen, with high purity and low resistance. The grounding clamp is made of aluminum alloy, which is strong and light in weight. Canvas bag is strong and wear-resistant, easy to carry. CODE Earthing set type mm2 Earthing wire dimension Accessories 527101 16 0.5M x 4pcs+2M 5 insulated hand pliers + 1 bag 527102 16 1.0M x 4pcs+1.5M 5 insulated hand pliers + 1 bag 527103 16 0.5M x 4pcs+2M 4 insulated hand pliers + 1 aluminum ground clamp +1 bag 527104 16 1.0M x 4pcs+1.5M 4 insulated hand pliers + 1 aluminum ground clamp +1 bag 527105 16 1.0M x 4pcs+3M 4 insulated hand pliers + 1 aluminum ground clamp +1 bag 527106 25 1.0M x 4pcs+3M 4 insulated hand pliers + 1 aluminum ground clamp +1 bag 527107 25 1.0M x 4pcs+5M 4 insulated hand pliers + 1 aluminum ground clamp +1 bag

Minimum Order: 1 bags

Features: 1.Matching screws and nuts, 10 mm diameter of the hole at the end,screw diameter of 8 mm. 2.Fine solder joint, welding deformation is small, weld has good crack resistance. 3.The product adopts high strength steel, the surface can be galvanized or copper- plated according to the need. 522001 Cold galvanized steel 800 x 16mm 522002 Cold galvanized steel 1000 x 16mm 522003 Copper-plated steel 800 x 16mm 522004 Copper-plated steel 1000 x 16mm 522005 Copper-plated steel +threaded 800 x 16mm 522006 Copper-plated steel +threaded 1000 x 16mm

Minimum Order: 1 bags