Environment & Recycling

The LHW-60 FOG CANNON uses energy-efficient stainless steel vertical centrifugal pumps to extend the continuous operation of the equipment up to 24 hours. It also reduces energy consumption and fluid pump flow. Using a low flow and high atomization system increases atomization rate and reduces liquid waste. The blue ocean 60 fog cannon sprayer duster is equipped with a just-in-time system, which means the equipment can be started and stopped at any time in a stable way. You only need to set the operating time and stop time of the device. It makes the use of the duster more timely and efficient, and reduces labor costs. In terms of rotation, the blue ocean company PC system is used for independent control of the rotation of the equipment, so that the rotating system can swing around at any time, so as to bid farewell to the limit switch era. The blade is made of titanium alloy material. Titanium alloy itself is lightweight, corrosion resistant, has been the raw material of choice for the aviation industry, its greatest effect on dust collectors is noise reduction, and has a good dynamic balance when the fan rotates.

1. Double stage high vacuum pumping system: except the oil-sealed rotary vane vacuum pump, this machine is also equipped with a mechanical booster vacuum pump, so it has faster vacuum-pumping speed and can reach a very good ultimate vacuum. 2. Equipped with JUNSUN specially designed and unique “Horizontal - Vertical Combined Vacuum Tank”, together with advanced degasification and dehydration technology, which can remove gas and water very quickly and effectively. 3. High precision three stage oil filtration system, including primary filter, secondary filter, fine filter with gradually increasing precision, the dimensions of filter element are bigger than most of other manufacturers, which can effectively remove mechanical impurities from oil. 4. Equipped with automatic temperature control system, automatic oil level control system, automatic defoaming control system, automatic pressure protection system, which guarantees safe and reliable operation in the long term. 5. Equipped with comprehensive protection mechanism, such as power protection, pressure protection, motor overload protection. If any protection mechanism is triggered, the machine will stop working automatically. 6. Equipped with high efficiency electric heating system, heating the oil uniformly, avoid the deterioration of oil during heating process. 7. This machine can be operated both online and offline. In addition, it can be used as an independent vacuum pump system for the evacuation operation of the transformer (if you need this function, please inform us before manufacturing).

Minimum Order: 1 bags

1. Double stage high vacuum pumping system: except the oil-sealed rotary vane vacuum pump, this machine is also equipped with a mechanical booster vacuum pump, so it has faster vacuum-pumping speed and can reach a very good ultimate vacuum. 2. Equipped with JUNSUN specially designed and unique “Horizontal - Vertical Combined Vacuum Tank”, together with advanced degasification and dehydration technology, which can remove gas and water very quickly and effectively. 3. High precision three stage oil filtration system, including primary filter, secondary filter, fine filter with gradually increasing precision, the dimensions of filter element are bigger than most of other manufacturers, which can effectively remove mechanical impurities from oil. 4. Equipped with automatic temperature control system, automatic oil level control system, automatic defoaming control system, automatic pressure protection system, which guarantees safe and reliable operation in the long term. 5. Equipped with comprehensive protection mechanism, such as power protection, pressure protection, motor overload protection. If any protection mechanism is triggered, the machine will stop working automatically. 6. Equipped with high efficiency electric heating system, heating the oil uniformly, avoid the deterioration of oil during heating process. 7. This machine can be operated both online and offline. In addition, it can be used as an independent vacuum pump system for the evacuation operation of the transformer (if you need this function, please inform us before manufacturing).

Minimum Order: 1 bags

1. Double stage high vacuum pumping system: except the oil-sealed rotary vane vacuum pump, this machine is also equipped with a mechanical booster vacuum pump, so it has faster vacuum-pumping speed and can reach a very good ultimate vacuum. 2. Equipped with JUNSUN specially designed and unique “Horizontal - Vertical Combined Vacuum Tank”, together with advanced degasification and dehydration technology, which can remove gas and water very quickly and effectively. 3. High precision three stage oil filtration system, including primary filter, secondary filter, fine filter with gradually increasing precision, the dimensions of filter element are bigger than most of other manufacturers, which can effectively remove mechanical impurities from oil. 4. Equipped with automatic temperature control system, automatic oil level control system, automatic defoaming control system, automatic pressure protection system, which guarantees safe and reliable operation in the long term. 5. Equipped with comprehensive protection mechanism, such as power protection, pressure protection, motor overload protection. If any protection mechanism is triggered, the machine will stop working automatically. 6. Equipped with high efficiency electric heating system, heating the oil uniformly, avoid the deterioration of oil during heating process. 7. This machine can be operated both online and offline. In addition, it can be used as an independent vacuum pump system for the evacuation operation of the transformer (if you need this function, please inform us before manufacturing).

Minimum Order: 1 bags

What can this machine do for you? 1. Removes water, trace water from oil 2. Reduces combustible gases and oxygen 3. Improves oil dielectric values 4. Improves transformer power factor 5. Extends oil service life 6. Extends transformer service life and reliability 1. Double stage high vacuum pumping system: except the oil-sealed rotary vane vacuum pump, this machine is also equipped with a mechanical booster vacuum pump, so it has faster vacuum-pumping speed and can reach a very good ultimate vacuum. 2. Equipped with JUNSUN specially designed and unique “Horizontal - Vertical Combined Vacuum Tank”, together with advanced degasification and dehydration technology, which can remove gas and water very quickly and effectively. 3. High precision three stage oil filtration system, including primary filter, secondary filter, fine filter with gradually increasing precision, the dimensions of filter element are bigger than most of other manufacturers, which can effectively remove mechanical impurities from oil. 4. Equipped with automatic temperature control system, automatic oil level control system, automatic defoaming control system, automatic pressure protection system, which guarantees safe and reliable operation in the long term. 5. Equipped with comprehensive protection mechanism, such as power protection, pressure protection, motor overload protection. If any protection mechanism is triggered, the machine will stop working automatically. 6. Equipped with high efficiency electric heating system, heating the oil uniformly, avoid the deterioration of oil during heating process. 7. This machine can be operated both online and offline. In addition, it can be used as an independent vacuum pump system for the evacuation operation of the transformer (if you need this function, please inform us before manufacturing).

Minimum Order: 1 bags

1. Double stage high vacuum pumping system: except the oil-sealed rotary vane vacuum pump, this machine is also equipped with a mechanical booster vacuum pump, so it has faster vacuum-pumping speed and can reach a very good ultimate vacuum. 2. Equipped with JUNSUN specially designed and unique “Horizontal - Vertical Combined Vacuum Tank”, together with advanced degasification and dehydration technology, which can remove gas and water very quickly and effectively. 3. High precision three stage oil filtration system, including primary filter, secondary filter, fine filter with gradually increasing precision, the dimensions of filter element are bigger than most of other manufacturers, which can effectively remove mechanical impurities from oil. 4. Equipped with automatic temperature control system, automatic oil level control system, automatic defoaming control system, automatic pressure protection system, which guarantees safe and reliable operation in the long term. 5. Equipped with comprehensive protection mechanism, such as power protection, pressure protection, motor overload protection. If any protection mechanism is triggered, the machine will stop working automatically. 6. Equipped with high efficiency electric heating system, heating the oil uniformly, avoid the deterioration of oil during heating process. 7. This machine can be operated both online and offline. In addition, it can be used as an independent vacuum pump system for the evacuation operation of the transformer (if you need this function, please inform us before manufacturing).

Minimum Order: 1 bags

1. Double stage high vacuum pumping system: except the oil-sealed rotary vane vacuum pump, this machine is also equipped with a mechanical booster vacuum pump, so it has faster vacuum-pumping speed and can reach a very good ultimate vacuum. 2. Equipped with JUNSUN specially designed and unique “Horizontal - Vertical Combined Vacuum Tank”, together with advanced degasification and dehydration technology, which can remove gas and water very quickly and effectively. 3. High precision three stage oil filtration system, including primary filter, secondary filter, fine filter with gradually increasing precision, the dimensions of filter element are bigger than most of other manufacturers, which can effectively remove mechanical impurities from oil. 4. Equipped with automatic temperature control system, automatic oil level control system, automatic defoaming control system, automatic pressure protection system, which guarantees safe and reliable operation in the long term. 5. Equipped with comprehensive protection mechanism, such as power protection, pressure protection, motor overload protection. If any protection mechanism is triggered, the machine will stop working automatically. 6. Equipped with high efficiency electric heating system, heating the oil uniformly, avoid the deterioration of oil during heating process. 7. This machine can be operated both online and offline. In addition, it can be used as an independent vacuum pump system for the evacuation operation of the transformer (if you need this function, please inform us before manufacturing).

Minimum Order: 1 bags

Features of HSG Catheter  Designed for hysterosalpingography and sonohysterography procedure. Disposable with rigid sheath, available with Fr5 and Fr7 in size.  Radiopaque material of catheter allows the clear view during the procedure.  Specification of Catheter for HSG No. Product code Description 01 GC7005A11 Fr5, latex-free 02 GC7005A12 Fr7, latex-free Gcmedica was established in 1998, is a professional hepa filter factory, we provide catheter hysterosalpingographie, endotracheal tube and etc. Want to know hsg catheter types or hsg catheter price? Please contact us.

The cooling tower sprinkler head is a special water distributor for small and medium-sized round counter flow cooling tower. Through the small holes on the water distribution pipe, the water is evenly spread on the filler, increasing the water vapor contact interface, so that cooling tower sprinkler head parts and takes away heat, thus reducing the water temperature. Material of Cooling Tower Sprinkler Head ABS, nylon, nylon copper, aluminum alloy. Maintenance Points of Sprinkler Head in Cooling Tower a. When installing the sprinkler for cooling tower, check outside the tower first, and arrange the sprinkler head and water distribution pipe of sprinkler head cooling tower. Check whether the bearing and diameter of sprinkler head of cooling tower are consistent with the diameter of water inlet of cooling tower. b. Clean the water inlet of cooling tower and grind it. (here are the necessary steps for cooling tower maintenance) c. Lift the sprinkler head of the cooling tower into the tower and then place the sprinkler head on the water inlet smoothly. Here we should pay attention to the construction of the cooling tower filler to lay wood, so as not to damage the filler. Then tighten the water inlet and sprinkler head with nuts, diagonally. Prevent the sprinkler head from imbalance. d. Find the level ruler you brought in advance and put it on the sprinkler head. Adjust the sprinkler head according to the level to the balance position. e. Then install the water distribution pipe in turn, and the water distribution pipe shall present a 30°angle with the packing plane of the cooling tower. And the spray direction of each water distribution pipe should be consistent. f. After the installation, manually wave the water distribution pipe. Check whether the rotation is normal and whether there is friction on the tower body. Characteristics of Sprinkler Head in Cooling Tower a. Durable The cooling tower sprinkler head is corrosion resistant, high-strength, water and gas resistant, beautiful and durable, and it does not need maintenance for 3 years. b. Low outlet pressure The working pressure at the outlet of the nozzle is only 0.6mh2o, which has a large pressure adaptation range, low cost and stable quality. c. Safe and reliable If the nozzle of the cooling tower is damaged for various reasons, the cooling tower sprinkler head can be replaced in time, shorten the time of cooling tower sprinkler system recovery and alert state, so as to be safe and reliable in use. d. Anti clogging The spray head of cooling tower is easy to clean, makes the water distribution even and not easy to block, which is conducive to improve the cooling effect of cooling tower. e. Easy to maintain The nozzle of the cooling tower is very small, which is easy to block, which causes uneven water distribution and convenient maintenance. Our cooling tower company provides cooling tower filling, drift eliminator, fan, motor, gearbox, belt reducer, spray nozzle, sprinkler head, float ball, air inlet louvers, etc... Whatever cooling tower parts you need, you will find them in our cooling towers LLC AUVC.

Minimum Order: 1 bags

Why buy from us? 1. We are one of the largest manufacturers & exporters of oil purifier in China 2. We have more than 10 years export experience 3. We offer our customers high quality products at competitive price 4. We offer our customers excellent after-sales service 5. We are not satisfied until our customers are satisfied! What can this machine do for you? 1. Removes water, trace water from oil 2. Reduces combustible gases and oxygen 3. Improves oil dielectric values 4. Improves transformer power factor 5. Extends oil service life 6. Extends transformer service life and reliability ZY Series Single-Stage High Vacuum Transformer Oil Purifier is specially designed for treating transformer oil and other kinds of insulating oil in the oil-filled electrical equipment. Through degasification, dehydration, filtration process, the dissolved gases and moisture, solid particulate, contamination can be effectively removed. ZY Series Single-Stage High Vacuum Transformer Oil Purifier is widely used in factory workshops, power transmission and generation station. After treatment, the quality and breakdown voltage of transformer oil will be improved, which will extend transformer oil service life, and also extend transformer service life and reliability. Except the regular function of transformer oil treatment, this machine can be also used as vacuum oil drying and vacuum pumping equipment for transformers, high reliability, easy to operate.

Minimum Order: 1 bags

JS-ZYD-50 Series Double Stage High Vacuum Transformer Oil Purifier is specially designed for treating transformer oil and other kinds of insulating liquids in the oil-filled power equipment. Through degasification, dehydration, and filtration process, the dissolved gases and moisture, solid impurities, contaminations can be effectively removed from oil. JS-ZYD-50 Series Double Stage High Vacuum Transformer Oil Purifier is widely used in factory workshops, power station and power transmission. Utilizing JUNSUN ZYD-50 High Vacuum Oil Purifier, the quality of transformer oil will be greatly improved, thus extending the service life of transformer oil and ensuring safety operation of oil-filled power equipment. Besides, with additional design, JS-ZYD-50 Series Double Stage High Vacuum Transformer Oil Purifier can be also used as vacuum oil drying/ vacuum oil filling/ vacuum pumping equipment for transformers. MAIN FEATURES: 1. Double stage vacuum pumping system: based on the vacuum pump, this machine also installs root vacuum pump, large pumping speed, the machine can reach a very good ultimate vacuum. 2. Specially designed and unique "T" shape Vacuum separation chamber, advanced degasification and dehydration technology, which eliminates gas and water very quickly and effectively. 3. High precision three stage oil filtration system, including primary filter, secondary filter, fine filter with gradually increasing precision, the dimensions of filter element is bigger than most of other manufacturers, which can effectively remove mechanical impurities from oil. 4. Equipped with automatic temperature control system, automatic oil level control system, automatic defoaming control system, automatic pressure protection system, which guarantees safe and reliable operation in the long term. 5. Equipped with interlocking protection system, which connect the oil pump, electric heater and oil level controller, avoid blank heating, blank pumping, oil leakage and electricity leakage. If there is any fault, the machine will be switched off automatically. 6. Equipped with high efficiency electric heating system, heating the oil uniformly, avoid the deterioration of oil during heating process. 7. This machine can be operated both online and offline. In addition, it can be used as an independent vacuum pump system for the evacuation operation of the transformer (if you need this function, please inform us before manufacturing). 8. JUNSUN supplies a wide range of optional parts for the oil purifier, always ensure our customers can acquire the most suitable machine with all the configurations they need, to satisfy their every specific application.

Minimum Order: 1 bags

ZY Series Single-Stage Vacuum Transformer Oil Purification Plant is specially designed for treating transformer oil and other kinds of insulating oil in the oil-filled electrical equipment. Through degasification, dehydration, filtration process, the dissolved gases and moisture, mechanical impurities can be effectively removed. ZY Series Single-Stage Vacuum Transformer Oil Purification Plant is widely used in factory workshops, power transmission and generation station. After treatment, the quality and breakdown voltage of transformer oil will be improved, this will extend transformer oil service life, and also extend transformer service life and reliability. FEATURES: 1. Large area three-dimensional flash distillation technique, advance dehydrating and degassing system, which remove water and gas much quickly and completely. 2. High precision three stage oil filtration system, including primary filter, secondary filter, fine filter with gradually increasing precision, the dimensions of filter element is bigger than most of other manufacturers, which can effectively remove mechanical impurities from oil. 3. Advanced liquid automatic controller, pressure automatic-protector, which ensure long-term safely and reliable operation. 4. All necessary control switch, light indicator and meter are equipped on the control panel which provides easy control for operation and supervision. 5. Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor. 6. High efficiency electric heating system, heating oil uniformity, avoid oil deterioration during the purification process. 7. After purification the transformer oil’s technical parameters and properties are reclaimed, the oil’s breakdown voltage can reach up to 60 KV and better.

Minimum Order: 1 bags

What can this machine do for you? 1. Removes water, trace water from oil 2. Reduces combustible gases and oxygen 3. Improves oil dielectric values 4. Improves transformer power factor 5. Extends oil service life 6. Extends transformer service life and reliability 1. Double stage high vacuum pumping system: except the oil-sealed rotary vane vacuum pump, this machine is also equipped with a mechanical booster vacuum pump, so it has faster vacuum-pumping speed and can reach a very good ultimate vacuum. 2. Equipped with JUNSUN specially designed and unique “Horizontal - Vertical Combined Vacuum Tank”, together with advanced degasification and dehydration technology, which can remove gas and water very quickly and effectively. 3. High precision three stage oil filtration system, including primary filter, secondary filter, fine filter with gradually increasing precision, the dimensions of filter element are bigger than most of other manufacturers, which can effectively remove mechanical impurities from oil. 4. Equipped with automatic temperature control system, automatic oil level control system, automatic defoaming control system, automatic pressure protection system, which guarantees safe and reliable operation in the long term. 5. Equipped with comprehensive protection mechanism, such as power protection, pressure protection, motor overload protection. If any protection mechanism is triggered, the machine will stop working automatically. 6. Equipped with high efficiency electric heating system, heating the oil uniformly, avoid the deterioration of oil during heating process. 7. This machine can be operated both online and offline. In addition, it can be used as an independent vacuum pump system for the evacuation operation of the transformer (if you need this function, please inform us before manufacturing).

Minimum Order: 1 bags

ZYD Double-stage transformer oil purifier can quickly remove water, trace water, gas, particles as well as acetylene, hydrogen, methane and other harmful ingredients from oil effectively to improve oil's dielectric strength, effectively making sure electric equipments working safely and normally. Series ZYD oil purifier is particularly suitable for treating high- grade transformer oil, super-voltage transformer oil and new transformer oil. It can be used for filtration of more than 110V substation live line work onsite. Meanwhile, Series ZYD oil purifier can be used as independent vacuum source with functions of vacuum drying and vacuum oiling. Features: 1. Double-stage vacuum system, strong power of vacuum evacuating, ultimate vacuum value ≤ 5Pa. 2. Two vacuum separating chambers, efficient oil film sprayer, increasing separating size and separating time to ensure the dry-level and dielectric strength improving greatly. 3. Duplex-Stereo film evaporation technology, combined with unique and advanced dewatering, degassing components, can rapidly and effectively separate water, gas from oil. 4. Multi-stage precision filtration system, mesh filtration combined with molecular adsorption technologies. 5. Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable. 6. Double-stage liquid level sensor, pressure protective system to ensure machine operation easy and safely. 7. Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically. 8. Functions of live line work onsite, vacuum drying and vacuum oil filling.

Minimum Order: 1 bags