Fiber Optic Equipment

Description: Drop Cable Protect Fiber Heat Shrink Sleeves is a special polyolefin thermal-shrinkable sleeve, also called EVA. The outer layer is made of high quality soft crosslinked polyolefin material and inner hot-melt adhesive. The outer layer has the characteristics of insulation, corrosion prevention and wear resistance, while the inner layer has the advantages of low melting point, waterproof seal and high adhesion. Drop Cable Protect Fiber Heat Shrink Sleeves can Moisture resistant for environmental protection Clear sleeve make it easy to detect splice before shrinkage Easily use and avoid any damages to the optical fiber during installation Color optical fiber splice protector is very convenience for installation. The Drop Cable Protect Fiber Heat Shrink Sleeves is widely used in FTTH Drop cable joint connection protective. With big Inner Diameter of inner tube, we can put drop cable easily. communication optical fiber equipment such as optical fiber splice box, optical fiber terminal box, optical fiber distribution box, optical fiber transfer box, etc., when using Drop Cable Protect Fiber Heat Shrink Sleeves, it can not only protect the splice point but also increase the optical fiber machinery the strength reduces the damage of the optical fiber during the installation process without affecting the light guide characteristics of the optical fiber. If it is a transparent Drop Cable Protect Fiber Heat Shrink Sleeves, the splicing situation of the optical fiber can be seen clearly at a glance when the optical fiber is connected.

Minimum Order: 1000

Description: Ribbon Fiber Fiber Optic Protection Sleeve is designed for Ribbon fiber, normally it's 4 cores, 6 cores, 8 cores and 12 cores fiber optic protection sleeve for flat fiber cable. Ribbon Fiber Fiber Optic Protection Sleeve is applied to the optical fiber closure to fix and protect the optical fiber when splicing. The sleeves can be divided into two types (single sleeve and ribbon sleeve) according to the function. The single type is used for the single-fiber, and the mass type is used for the ribbon fiber. It is different in the reinforcement between two types. The single one realizes the reinforcement by the stainless steel needles, the later one via the ceramic reinforcement member to realize the function. Ribbon sleeve means there are several cores for the fiber. So the mass sleeve includes 4cores, 6cores, 8cores, 12 cores (for types). This product is constructed with an inner EVA meltable adhesive tube, a polyolefin heat shrink outer tube and either single or dual strength members. Our single strength member sleeve which has become an industry standard, has an after shrink diameter of 4.9 X 4.4 mm, and utilizes a special glass member.

Minimum Order: 2000

Chengdu Focus Infra Materials Company manufacturing all kinds of Shrinkable Fiber Optic Sleeve is applied to the optical fiber closure to fix and protect the optical fiber when splicing. Chengdu Focus Infra Materials company offers various type of fiber optic heat shrinkable sleeves for FTTH, FTTX, FTTP Network Project. The sleeve can be divided into two types(single and mass) according to the function. The single type is used for the single- fiber, and the mass type is used for the ribbon fiber. It is different in the reinforcement between two types. The single one realizes the reinforcement by the stainless steel needles, the later one via the ceramic reinforcement member to realize the function.Mass means there are several cores for the fiber. So the mass sleeve includes 4cores,6cores,8cores,12cores(for types).

Minimum Order: 5000

PRODUCT DESCRIPTION OTN/DWDM 19" 5U 100G 200G Optical Transmission Network Solutions for Telecom/Datacenter/5G/Long Haul Network OSP3800 series is a compact, high-capacity, low-cost OTN optical transmission system introduced by Iseelink. It adopts a CWDM / DWDM common platform design, supports multi-service transparent transmission, and has flexible networking and access capabilities. Applicable to the national backbone network, provincial backbone network, metro backbone network, and other core networks, to meet the needs of large-capacity nodes above 1.6T, is the industry‘s most cost-effective transmission application platform. Build a large-capacity WDM transmission expansion solution for IDC and ISP operators. Product Features ● Standard 5U, 19", 20 slots ● Dual power supply AC/DC optional ● Multiple service card hybrid insertion ● Support 10G/100G/200G hybrid transmission Product Applications Telecom Datacenter 5G Network Long Haul Network Product Specification Function Note Product model OSP3800-1 OSP3800-2 OSP3800-4 OSP3800-5 Equipment 1U: (back-power supply) 2U: (back-power supply) 4U: (back-power supply) 5U: (back-power supply) Service slot 4 slots 8 slots 16 slots 20 slots Power consumption 120W (Max) 300 W (Max) 600 W (Max) 750W (Max) Max channel number CWDM: 18 wavelengths, DWDM: 96 wavelengths (50GHz) Single channel max rate 200Gbit/s Line side rate 1.25Gbit/s, 2.5Gbit/s, 8Gbit/s, 10Gbit/s, 16Gbit/s, 25Gbit/s, 40Gbit/s, 200Gbit/s Support service STM-1/4/16/64/256,OC-3/12/48/192/768 OT , U-1/2/3/4 FE/GE/10GE/25GE/40GE/100GE FC 1G/2G/4G/8G/16G/32G Clock features Support IEEE 1588V2 Network topology Point-to-point, chain type, star type, ring type Network level protection Optical channel 1+1 protection, optical multiplex 1+1 protection, optical line 1+1 protection Equipment level protection Power supply backup Network management SNMP, Web, CLI, Telnet Installation "19" and 23" cabinets, ETSI 300mm/600mm cabinets Wireless outdoor base station cabinet, FTTX outdoor cabinet, hanging wall Working temperature range -10℃～60℃ Working humidity range 5~95% no condensation Storage temperature range -40℃～85℃ Heat dissipation Fan cooling Power supply mode AC: 90 ~ 260V or DC: -36 ~ -72 V OSP3800 series includes the following cards NMS management card 100G QSFP28 to CFP transponder 2xQSFP28 to CFP2 200G Muxponder 100G Muxponder: QSFP28 ↔ 4xSFP28 40G&100G OEO: 6*QSFP28 SFP28 25G Quad transponder SFP+ Multi-Rate Quad transponder Redundant Multi-Rate Dual transponder EDFA Optical Amplifiers Bidi EDFA Optical Amplifiers 16ch DWDM MUX/DEMUX 40ch DWDM MUX/DEMUX(AAWG) OLP Optical Line Protector DWDM Passive Optical Add/Drop Multiplexers DCM card Schematic Diagram 100G WDM OTN Device Optical Transmission Network Solutions 0

PRODUCT DESCRIPTION Features Compliant with IEEE802.3bs Standard: -400GAUI-8 Electrical Interface Compliant with IEEE 802.3cu Standards: -4x 100GBASE-FR1 Optical Interface Compliant with QSFP-DD MSA HW Rev 5.1 Type 2 Housing with MPO-12 Connector Compliant with QSFP-DD CMIS Rev 4.0 Two Wire Serial Interface with Digital Diagnostic Monitoring Complies with EU Directive 2011/65/EU (RoHS compliant) Class 1 Laser Applications 400GBASE-XDR Infiniband Interconnect Enterprise Networking Description The ZK-QDD-4H31MP-02 Module supports link lengths of up to 2km parallel SMF with MTP/MPO-12 connector. It is compliant to IEEE 802.3bs protocol and 400GAUI-8 standards. The 400 Gigabit Ethernet signal is carried over four parallel lanes by one wavelength per lane. It can be used as 4x100G breakout to QSFP28-DR-100G.

Product Description Product Description:Finisar FCLF8521P2BTL 10/100/1000BASE-T Copper SFP Fiber Transceiver Finisar’s FCLF8521P2BTL 1000BASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA)1 . They are compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE Std 802.3. The transceiver is RoHS compliant and per Directive 2011/65/EU3 and Finisar Application Note AN-2038. The 1000BASE-T physical layer IC (PHY) can be accessed via I2C, allowing access to all PHY settings and features. The FCLF8521P2BTL is compatible with 1000BASE-X auto- negotiation, but does not have a link indication feature (RX_LOS is internally grounded). See AN-2036, “Frequently Asked Questions Regarding Finisar’s 1000BASE-T SFPs”, for a more complete explanation on the differences between the two models and details on applications issues for the products. The FCLF8522 shall support both RX_LOS pin for link indication and 1000BASE-X auto-negotiation. Key Features: Up to 1.25Gb/s bi-directional data links Hot-pluggable SFP footprint Extended case temperature range (-40°C to +85°C ) Fully metallic enclosure for low EMI RoHS compliant and Lead Free Low power dissipation (1.05 W typical) Compact RJ-45 connector assembly Access to physical layer IC via 2-wire serial bus 10/100/1000 BASE-T operation in host systems with SGMII interface

Stable construction for mechanical protection of fusion splice Use in glass fibers with 250μm outside diameter (including primary coating) Permanently elastic compound prevents damage to the splice site from environmental influences No influence on the absorption of the splice resealable blister packaging Packing unit consisting of 5 strips a 30 splice protection elements incl. assembly instructions Processing with any commercially available press for crimp splice protection SSE with Telekom approval according to TS 0338/96 * Measurements: - Item: 30x3x1.2 mm (WxHxD) - Packing unit: 205x20x60 mm (WxHxD)

Minimum Order: 1500

Focus Infra’s Fiber Optical Adapter Metal Adapter SC APC SM Simplex Coupler is used for Single Mode Fiber Connection. The "SC" connector is a standard square connector, using engineering plastics, which has the advantages of high temperature resistance and not easy to oxidize. The optical interface on the transmission equipment side generally uses an SC connector. The Fiber Optic Coupler is a device for detachable (movable) connection between an optical fiber and an optical fiber. Feature： High size precision; Good repeatability; Good changeability; Good temperature stabilization; High wearable. Application： CATV System Telecommunications Optical Networks Testing / Measurement Instruments Fiber To the Home Patch Panels Distribution Frames Maintenance or Emergency Restoration of Fiber Networks FTTH Outlets Connection at the desk for LAN enviroments

Minimum Order: 1000

Single-Mode Connector FTTH Tool Cold Connector Tool SC UPC Fiber Optic Fast Connector, commonly known as the union, commonly known as Single-Mode Connector FTTH Tool Cold Connector Tool SC UPC Fiber Optic Connector, is used to connect two optical fibers or optical cable to form a continuous optical path can be reused passive devices, has been widely used in optical fiber transmission lines, fiber patch panels And fiber test equipment, instrumentation, is currently the largest number of optical passive devices. The unique design of the patented mechanical splice body incorporates a factory-mounted fiber stub and a pre-polished ceramic ferrule. Using this onsite assembly optical connector, it is possible to improve the flexibility of optical wiring design as well as reducing the time required for fiber termination. The Fast connector series are already a popular solution for optical wiring inside buildings and floors for LAN & CCTV applications and FTTH. Application: 1. Optical communication network 2. Telecom network 3. Ethernet network 4. CATV network

Minimum Order: 100

Embed cable fast connector Singlemode Optic sc apc green for Field Assemble ftth fiber to the home (Field Assembly Connector or Field terminated fiber connector, quickly assembly Fiber connector) is a revolutionary field installable optical fiber connector that requires no epoxy and no polishing. The unique design of the patented mechanical splice body incorporates a factory-mounted fiber stub and a pre-polished ceramic ferrule. Using this onsite assembly optical connector, it is possible to improve the flexibility of optical wiring design as well as reducing the time required for fiber termination. The Fast connector series are already a popular solution for optical wiring inside buildings and floors for LAN & CCTV applications and FTTH. High Quality IR 0.3dB FTTH Fiber Optic SC Fast Connector takes use of the latest generation of Rapid Ready-Terminal technology. After terminating, both the optical and mechanical performances reach the standard for patchcord and meet the demand for making patch cord on site by mechanical splicing. Application: FTTx Rebuilding the wiring in optical equipments rooms Following types of connector is available: SC/PC,FC/PC Feature: 1. Fast and easy termination of rectangular section FTTH drop cable 2. No polishing or adhesives required 3. Terminate cable to exact required length 4. Can be re-opened up to 5 times 5. Simple to assemble with our guide rail tool 6. Applied to 2.0mm × 3.0mm & 2.0mm × 1.6mm drop cable; 7. Easy to operate, fast to assemble, high success rate, long time of using, easy maintenance. Product name Fiber Optic Fast Connector SC/APC Product size 55mm*9mm Shell material Flame retardant(PEI) Insertion Loss ≤0.3dB Return Loss of pigtail ≥55dB Type Singlemode Suit cable diameter 0.9/2.0/3.0mm Application scope FTTH FTTB FTTX Network Applicable temperature -40℃~+85℃ tensile strength 30N

Minimum Order: 500

This new type butterfly fiber optic cable protective box is a case to put in a butterfly cable with a thermal protection tube after hot melting, so that the splice spot can get a better protection.Relative to the cold welding, the hot one can improve the optical performance of connector, make the effective connection rate increased to one hundred percent, prolong the service life of the product and lower maintenance costs. This Fiber Drop Splice Closure is used in FTTH connection, we use this Fiber Drop Repair Splice Closure to make heat Shrinkable Splice with 2pcs Drop Cable (Or Drop Cable SC Connector Terminated one side). It's designed for either Flat Drop Cable or Round Drop Cable. This Fiber Drop Repair Splice Closure is installed indoor or outdoor, it provide good connection and protection in FTTH Constructions. Drop Cable Protect box is used for drop cable connecting, splice and protection. It can hold 1pce SC Simplex adapter, 2pcs SC fast connectors, suitable for FTTH. It could be indoor or outdoor use, with good waterproof capacity. It is compact size, good appearance. Provides extremely economical and optimal protection for exposed single fiber connectors. Product Features : 1. ABS material used ensures the body strong and light. 2. Water-proof design for outdoor uses. 3. Easy installations 4. Protection Level: IP65. 5. Adapter Type:SC Simplex Adapter; LC Duplex Adapter 6. Waterproof and Dustproof design 7. Cable fixing units provided for fixing the outdoor optical cable. 8. Product Size:160*47*17mm (W x H x D) Operation conditions: Storage/Operating Temperature: -40°C to + 60°C

Minimum Order: 100

Product Description Cat5E Ethernet Patch Cable OEM/ODM for UTP FTP BC CCA CCS PVC TPE Jacket Independent package and LOGO Product Description: Cat5E Ethernet Patch Cable is a high-performance data cable that is designed for reliable transmission of data up to 100 Mbps. It features RJ45 connectors with gold plated finish for optimal signal quality and durability. This Cat5E patch cable is made of premium quality copper conductor to ensure maximum performance and reliability. It is perfect for connecting your Ethernet devices in a secure, dependable, and high-speed network. Cat5E Ethernet Patch Cable is ideal for use in Ethernet applications as it is designed to meet the stringent demands of today's high-speed communication networks. It is suitable for use in both residential and commercial networks. This Cat5E patch cable is designed to provide superior signal quality and performance with minimal crosstalk and interference. It is also perfect for connecting your Ethernet devices to your network switch or router. Cat5E Ethernet Patch Cable is a great choice for connecting your Ethernet devices as it is compliant with the Cat5E standard. It is also designed to provide excellent signal quality, reliable transmission, and maximum data transfer speeds. This Cat5E patch cable is perfect for connecting your Ethernet devices in a secure and dependable network. Features: Product Name: Cat5E Ethernet Patch Cable Packaging: Bulk Voltage Rating: 30V Jacket Type: PVC Conductor Material: Copper Shielding: Unshielded Technical Parameters: Property Value Category Cat5E Color Customized Jacket Type PVC Cable Type Cat5E Voltage Rating 30V Length 1m/ 1.5m/ 2m/ 3m/ 5m/ 10m/ 20m/ 30m Product Name Cat5E Ethernet Patch Cable Wire Gauge 24 AWG Connector Finish Gold Plated Packaging Bulk Applications: Cat5E Ethernet Patch Cable is a high-performance cable that provides reliable, high-speed connections between computers, routers, switches, and other networking components. It is a brand name of EJE or can be customized for specific requirements, with model number EJEUBC-1500RJ45. It is manufactured in Shenzhen, and has UL, HDMI, and RoHS certifications. The minimum order quantity is 5000 PCS at a negotiable price, and it is individually wrapped in cartons. Delivery time is 15-20 days with payment terms of TT, and the supply ability is 500000pcs per day. It is a Cat5E cable with an RJ45 connector, packaged in bulk and unshielded. Packing and Shipping: Packaging and Shipping Cat5E Ethernet Patch Cable is packaged and shipped in the following way: The product is placed in an ESD protective bag. The product is then placed in a box that is designed to absorb shocks and vibrations. The box is then sealed with strong packing tape. The box is then shipped via a reliable carrier, such as UPS or FedEx.

Focus Infra’s Fiber Optical Adapter Metal Adapter SC UPC SM Simplex Coupler is used for Single Mode Fiber Connection. The "SC" connector is a standard square connector, using engineering plastics, which has the advantages of high temperature resistance and not easy to oxidize. The optical interface on the transmission equipment side generally uses an SC connector. The Fiber Optic Coupler is a device for detachable (movable) connection between an optical fiber and an optical fiber. Functions and features : • Low insertion loss,high return loss • Excellent Temperature stability • Good repeatability and exchangeability • Excellent mechanical endurance • Strict curing time and temperature control • Strict testing standards and methods for quality • Environment protection (ROHS Compliance) • The fiber optical patch cord can be customized according to customers'specific requirements (Customized Connector/Length/package...) • 100% NEW raw material and well quality control ensure the best life time.

Minimum Order: 1000

Duct Mounting IP65 1 Inlets 4 Outlets Plastic Fiber Optic 48 96 72 Cable Splice Closure Equipment, also known as Duct Mounting IP65 1 Inlets 4 Outlets Plastic Fiber Optic 48 96 72 Cable Joint Box, is the place where the end of optical cable is connected. Then it is connected to optical switch through optical fiber jumper to prevent material aging caused by heat, cold, light, oxygen and microorganisms in nature. Horizontal Type 3 Inlets 3 Outlets Fiber Optical Cable Splice Joint Box is widely apply for the connecting of optical cable. Duct Mounting IP65 1 Inlets 4 Outlets Plastic Fiber Optic 48 96 72 Cable Splice Closure Equipment is used for the protective connection and fiber distribution between two or more optical cables, it is one of the common equipment of user access points, mainly completing the outdoor connection between wiring cable and household cable, and the cassette or simple optical separator can be installed according to the FTTX access needs. Duct Mounting IP65 1 Inlets 4 Outlets Plastic Fiber Optic 48 96 72 Cable Splice Closures are widely apply for the connecting of optical cable.It Suitable for straight-through, diverging and connection of FTTH. FTTB all kinds of optical communication passive network.

Minimum Order: 50