Industrial Machinery & Equipment - Others

Descriptions of Aviation Parts: Amphenol Industrial MS 5015 Series — MIL-DTL-5015 and MIL-5015 Type Standard Cylindrical Connectors: MS connectors meet the latest performance requirements of MIL-DTL-5015. These connectors represent well-proven electrical capability at an acceptable cost for most equipment where durability is important. MIL-DTL-5015 features threaded couplings and single key/keyway polarization, representing maximum simplicity in design. Applications include military ground support equipment, ordnance and shipboard installations. Amphenol Industrial Operations manufactures five classes of connectors to meet different requirements. Class designations and brief descriptions are listed below.

Stainless steel dewatering pump (portable) application For circulation and water removal of fish farm, fountain pool, landscape pond, car wash, drainage of basement and construction site, wastewater treatment of chemical industries，etc. Stainless steel dewatering pump (portable) 50HZ: 1. Output: 0.2HP~1.5HP 2. Discharge: 1" ~ 2" (inch) 3. Phase:1Ф~3Ф 4. Capacity: 0.05~0.35 (m3/min) 5. Head: 4~11 (m) Features: 1. Corrosive-resistant stainless steel materials are adopted, attractive appearance, no second pollution caused. 2. Chemical-resistant SIC mechanical seal and fluorine gasket are adopted to provide reliable sealing effects for chemical wastewater. 3. Light weight, pump casing is made of stainless steel and formed by stamping. 4. SONHO is a portable pump manufacturer founded in 1995. We have accumulated rich experiences in stainless steel dewatering pump and portable dewatering pump.

Application: Basement wastewater discharge, septic tank pumping, waste water discharge, industrial water treatment, animal husbandry wastewater discharge. Submersible Sewage pump series (50HZ): 1. Output: 1HP~15HP 2. Discharge: 2"~4" (inch) 3. Phase: 1Ф~3Ф 4. Capacity: 0.2~2.5 (m3/min) 5. Head: 9~33 (m) Features: 1. Dependable laminated sheet of Si steel is adopted to sewage pump; shaft and rotor are machining precisely to raise stability and efficiency of sewage pump. Motor frame, shaft, screws are made of stainless steel to provide long service life and attractive appearance. 2. Sewage pump's Impeller is designed to special water flow, muddy liquid and other various wastewater can be efficiently drained. 3. The product range is up to 15Hp, dual SIC mechanical seals is built in (1.5 Hp and above). 4. Inner cable wires and cable base are upgraded by filling EPOXY to raise humidity-resistance. 5. Sewage pump's design to easily disassemble motor and pump housing for maintenance. 6. Float switch is available for model under 2Hp. 7. With more than 25 years of submerged sewage pump experience, SONHO is the best submersible sewage pump supplier supplying to all over the world.

Falling film evaporator have Single effect falling film evaporator, double effect falling film evaporator, three effect falling film evaporaot. they are widely used with high efficient heat exchanger ratio, short heating time etc. Evaporation temperature usually focus on 46-50 degree, especially used for active fermentation liquid, heat sensitive food evaporation, also suit for kinds of water solution low temperature continuous evaporation concentration ,such as glocuse,xylose,starch sugar,oligose,fresh milk and maltodextrin. falling film evaporator is widely used in the industry of food, chemical,pharmacy,biology engineering,environmental engineering and waste water recycle etc. Processing Flow The material which entered into the balance tank will pumped to the pipeline of the preheater though flow meter and right angle valve, after heating to evaporating temperature, the material will flow to the distributor of 1st Effect Evaporator and distribute into every evaporating pipeline evenly, then flow down along the wall with membrane state, the material start to evaporate by steam which comes from steam manifold and heater jacket. this is the first evaporation. The secondary steam produced run to bottom of the chamber together with material, enter into 1st effect separator at tangent direction, then secondary steam and material separated when rotating, raw material enter into separator at top the 2nd effect evaporator by pump though discharge tube. Finishing the second evaporation concentration as the same way of first evaporation. And then, send to the top of distributor of the 3rd Effect Evaporator for concentrating as the same method. Finally, the material will reach the required concentration and discharged by Outlet pump though bottom of separator, then do next process by discharge pump. Saturation vapor enter into steam distribution cylinder from main branch( about 0.6-0.8kg per cm2 ),and then enter into 1st,2nd,3rd evaporator, condenser and relative four preheaters, for supply heat energy to the material. The secondary steam which separated from separator will be inhaled to condenser for cooling, the condensate will be pumped out by condensate pump as pre-treatment using or use in boiler.

Now the raw materials handled by this press wood pallet machine are all kinds of wood chips, coconut shells, waste wood sawdust, etc. Therefore, this equipment meets the requirements of environmental protection and is welcomed by many customers.

Minimum Order: 1 bags

Cryogenic-high temperature-Corrosion resistant CENTRIFUGAL PUMPS-ALLY Industrial International is a consortium of four companies, forming an upstream and downstream industrial chain. They are: Metal Processing Company: the factory covers area of 30000 square meters and has 70 employees, Business scope: CENTRIFUGAL PUMPS, Machining, Welding, Sheet metal processing, Forging, Casting. Rubber Machinery Company: the factory covers area of 50000 square meters and has 130 employees in total including 40 technicians and 15 senior engineers, Main products: Dispersion kneader, Internal mixer, Mixing mill and related production lines. Plastic Machinery Company: the factory covers area of 32000 square meters and has 160 employees, Main products: Film Blowing Machine, three layers co-extrusion lamination FFS heavy duty bags blowing film line,Three layers Co-extruded spinning film set,PE hot Shrink film set, Rubber tire separation film set. Automation Equipment Company: the factory covers area of 16000 square meters and has 40 employees, Main products: Robotic Parts Feeding System, Pick and Place Machine, Conveying Equipment, Conveyor rollers, Movable lift freight elevator, Metal shavings briquetting machine. Our industry solutions have been widely recognized by customers in Japan, United States and Europe.

The separation filter element produced and designed by Paier Company is the second filter element of the filter separator cartridge, which can separate water droplets from aviation kerosene, gasoline, diesel oil and naphtha, and is an important functional element of the filter separator. PRF series separation filter elements can meet the requirements of fixed and mobile functional elements, while PRF series separation filter elements can meet the requirements of fixed and mobile. Separator Element Types Equivalent of (PECO) Separator Filter Cartridge Equivalent of (FACET) Separator Filter Cartridge Equivalent of (Parker) Separator Filter Cartridge Equivalent of (Velcon) Separator Filter Cartridge Equivalent of (PALL) Separator Filter Cartridge Equivalent of (JONELL) Separator Filter Cartridge Separator Filter Element Advantage The separation filter element has good lipophilicity and hydrophobicity, so it can be used to further separate water and finally obtain clean and anhydrous oil. A separation filter element is often used for drying various gases. It can separate the fine water mist dispersed in the gas, which plays the role of drying and dehydration. At the same time, the separation cartridge can also be used to filter some liquid-liquid immiscible mixtures with large specific gravity differences. Separating the filter element can also effectively keep the oil circuit inside the filter and prolong the service life of the filter. At the same time, it has good interchangeability. Some filter elements used in the low-pressure environment are also provided with bypass valves. When the filter elements are replaced in time, the bypass valves can automatically open, ensuring the normal operation of the filter system and effectively controlling the pollution degree of the working medium. Separator Element FAQs  What is a separator element? Oil water separator filter cartridge is mainly designed for oil-water separation, and it contains two kinds of filter elements, namely, poly filter element and separation filter element. For example, in the oil water removal system, after the oil flows into the coalescence separator, it first flows through the coalescing filter element, which filters out solid impurities and coalesces tiny water droplets into larger water droplets. Most of the coalesced water droplets can be separated and removed from the oil by their own weight, and settled into the water collecting tank. More different filter cartridge types, please visit our website. As a professional filter cartridge china manufacturer, we provide high quality coalescing filter element, separator element, pre filter cartridge, hydraulic filter element. Coalescing filter element is used to remove fine liquid and solid particles from compressed air systems. Separator Element is designed to separate water from oil in hydraulic systems. Pre Filter Cartridges are also widely used in filtration systems to remove larger particles before they reach the main filter.

Minimum Order: 1 bags

The RO pre filter cartridge includes a PP cotton filter element, folding filter element, wire-wound filter element, large flow filter element, etc., which flows from inside to outside. The folding filter element with a high flow rate ensures long life, high capacity, low-cost filtration, and stable flow rate. Simple design, easy installation, and movement reduce the labor cost when replacing the filter, and ensure safety. Cartridge Pre Filter Types Equivalent of (PECO) Pre Filter Cartridge Equivalent of (FACET) Pre Filter Cartridge Equivalent of (FAUDI) Pre Filter Cartridge Equivalent of (Parker) Pre Filter Cartridge Equivalent of (Velcon) Pre Filter Cartridge Equivalent of (PALL) Pre Filter Cartridge Equivalent of (JONELL) Pre Filter Cartridge Pre Filter Cartridge Features Glass fiber composite felt is the filter medium, polypropylene non-woven fabric inner and outer support layers, heat-resistant reinforced polypropylene outer cover end cover, inner core (stainless steel) and silicone (fluorine) rubber double O-ring. The filter is formed by folding and hot-melt welding technology, which has good integrity, no leakage and no pollution. Pre Filter Cartridge FAQs  Why pre filter cartridge for water purifier is important? 1. Removal of suspended solids to protect against membrane fouling 2. Achieving low SDI to protect against membrane fouling 3. Bacteria removal to prevent biofouling of the membranes 4. Lower operating expense of the system 5. Reduced capital expense Now the pre filter cartridge price is low, anything you need, please contact us. As one of filter element companies, we can offer sorts of cartridge filter element for sale, if you are interested, please leave us a message.

Minimum Order: 1 bags

The hydraulic filter element can be used for filtering hydraulic oil, water glycol, diesel oil, processing fluid, lubricating oil, coolant, gasoline, process fluid, turbine and compressor lubricating oil, synthetic lubricating oil, and more chemicals. And oil and more chemicals. Hydraulic Filter Element Types Hydraulic systems rely on hydraulic filter elements to ensure the cleanliness of the hydraulic fluid, which is vital for the optimal performance and longevity of the system. There are various types of hydraulic filter element sizes available provided by our hydraulic filter element manufacturers. These filter elements are engineered to effectively remove contaminants like particles, water, and varnish from the hydraulic fluid, maintaining the desired cleanliness level. They are available in different media types, including cellulose, synthetic, and wire mesh, to suit specific application requirements. Similarly, these hydraulic oil filter elements are known for their high dirt- holding capacity, efficiency, and long service life. Also, these hydraulic filter elements are constructed with advanced filtration media and technology to efficiently remove particles, water, and other contaminants from hydraulic fluids. Hydraulic Filter Element Features The hydraulic oil filter element is divided into a high-pressure section, medium-pressure section, oil return section, and oil absorption section. divided into high, middle, and low precision grades. 2-5um is high precision, 10-15um is medium precision, and 15-25um is low precision. In order to compress the overall dimensions of the finished filter element and increase the filtering area, the filter layer is generally folded into a corrugated shape, and the pleating height of the hydraulic filter element is generally below 20mm. Generally, the pressure difference of hydraulic filter elements is 0.35-0.4MPa, but some high pressure hydraulic filter elements are required to bear high- pressure differences, and the maximum requirement is 32MPa, even 42MPa, which is equivalent to the system pressure. Hydraulic filter element group diagram Diagram of hydraulic filter element group (9 sheets) the highest temperature, some requirements of 135℃. Hydraulic Filter Element FAQs  What is hydraulic filter element? The hydraulic filter element is used in the hydraulic system to filter out the particles and rubber impurities in the system and ensure the cleanliness of the hydraulic system. Hydraulic Filter Element Benefits High pressure hydraulic filter elements remove contaminants from the fluid, ensuring clean and reliable operation. This leads to improved system performance, reduced downtime, and enhanced productivity. Secondly, by removing contaminants, filter elements prevent damage to sensitive hydraulic components, such as pumps, valves, and cylinders. This extends their lifespan and reduces the frequency of repairs or replacements. Thirdly, clean hydraulic fluid reduces friction, heat, and wear within the system, improving energy efficiency and overall performance. This translates to reduced energy consumption and lower operating costs. Then, filter elements prevent contaminants from circulating within the hydraulic system, ensuring the integrity of the fluid and preventing damage to critical components. Fianlly, hydraulic filter elements help meet industry standards and regulations, ensuring compliance with quality and safety requirements. By removing contaminants, filter elements help maintain the quality and longevity of the hydraulic fluid, reducing the need for frequent fluid changes and disposal. Hydraulic Filter Element Application High Pressure Applications: Compare with coalescer element, hydraulic systems can operate under high pressure conditions, such as heavy machinery and industrial equipment, require filter elements capable of withstanding high pressure differentials. These filter elements are designed with robust materials and reinforced structures to ensure durability and reliable filtration performance in high-pressure environments. Medium Pressure Applications: Many hydraulic systems, including mobile machinery, agricultural equipment, and automotive applications, operate at medium pressure levels. Filter elements used in these systems strike a balance between durability and filtration efficiency, effectively removing contaminants to maintain system integrity and performance. Low Pressure Applications: In certain hydraulic systems with lower pressure requirements, such as hydraulic power units, lubrication systems, and smaller equipment, filter elements are designed to offer efficient filtration without the need for heavy-duty construction. These filter elements provide reliable contamination control in low-pressure hydraulic systems. As a hydraulic filter element supplier, we can offer sorts of replacement hydraulic filter elements for sale, and the hydraulic filter element price is reasonable, anything you need, please contact us. If you are looking for a reliable filter cartridge factory, please contact us, and we will be your best partner.

Minimum Order: 1 bags

In the hydraulic system, it is used to filter out solid particles and colloidal substances in the working medium and effectively control the pollution degree of the working medium. This series of filter elements is a substitute product after the localization of imported filter elements for foreign equipment. The filter elements are made of imported filter materials, and the performance parameters of the filter elements reach the level of similar foreign filter elements, which can completely replace HYPRO filter elements. HYPRO filter cross reference is a process of matching or identifying replacement filters from other manufacturers that can be used as an alternative to the original hydraulic filter element. However, sometimes, it may be challenging to find the exact HYPRO filter cross reference for filter replacement. In such cases, a HYPRO filter cross-reference chart can be used to find an equivalent filter that meets the same specifications and quality standards. It can save time, money, and effort by providing a suitable equivalent of hydraulic filter element without compromising the efficiency and performance of the equipment. The cross-reference for HY PRO hydraulic filter element involves matching the specifications, size, and compatibility of the original Hypro filter is to ensure a proper fit and optimal performance. HYPRO Filter Cross Reference Types When it comes to selecting the right filter for a specific application, the HYPRO filter cross reference types offer a comprehensive range of options to choose from. 1. Pressure Method: HYPRO filters categorized under the pressure method are designed to handle high-pressure applications. These filters are specifically engineered to withstand the demanding conditions often encountered in industries such as oil and gas, manufacturing, and hydraulic systems. They offer exceptional dirt-holding capacity, efficient particle removal, and excellent durability, making them ideal for filtering fluids under high pressure. 2. Use Method: HYPRO filters categorized under the use method are designed to meet the specific requirements of different applications. These filters are further classified based on the intended use, such as industrial, agricultural, or commercial applications. Whether it's filtering water, fuel, chemicals, or hydraulic fluids, these filters are engineered to deliver superior performance and reliable filtration in their respective applications. Each type offers distinct advantages, such as enhanced filtration efficiency, extended equipment lifespan, application-specific solutions, and reliable construction. Whether for high-pressure applications or specific industries, HYPRO filters deliver reliable and efficient filtration solutions, ensuring optimal performance and protection for various equipment and systems. HY PRO Filter Cross Reference Equivalent Cleaning Proper maintenance of hydraulic filters is essential to ensure optimal performance and longevity of hydraulic systems. Regular cleaning of these filters plays a crucial role in removing contaminants and preserving the system's efficiency. Cleaning a hydraulic filter involves removing accumulated debris and contaminants to restore its filtration capabilities. The process typically involves the following steps: 1. Removal: Carefully remove the hydraulic filter from the system, following the manufacturer's instructions. 2. Pre-Cleaning Inspection: Before cleaning, visually inspect the filter cartridge for any signs of damage, such as tears or cracks. If the filter shows significant wear or damage, it may be necessary to replace it instead of cleaning. 3. Initial Cleaning: Use compressed air or a soft brush to remove loose debris and contaminants from the filter element. 4. Cleaning Solution: Prepare a suitable cleaning solution recommended by the manufacturer or use a dedicated filter cleaning product. 5. Soaking: Immerse the filter in the cleaning solution and let it soak for the recommended duration. 6. Rinse: Thoroughly rinse the filter with clean water to remove the cleaning solution and dislodged contaminants. 7. Drying: Allow the filter to air-dry completely in a clean and well- ventilated area. Avoid using compressed air for drying, as it may damage the filter media or force contaminants deeper into the element. Characteristics of Hydraulic Filter Element The hydraulic filter element provided by our filter cartridge manufacturer is made of high-quality glass fiber, which is widely used in the hydraulic systems to filter out solid particles and colloidal substances in the medium, reduce the friction between the relative surfaces of hydraulic components, improve the reliability of the system, and ensure the safe and efficient operation of hydraulic system and lubrication system. Hydraulic filter elements are a crucial component of a hydraulic system that helps to remove contaminants and particles from the hydraulic fluid. The characteristics of hydraulic filter elements play a significant role in the effectiveness and efficiency of the filtration process. Our hydraulic filter element in HYPRO filter cross reference is made of high-quality glass fiber, which is widely used in the hydraulic systems to filter out solid particles and colloidal substances in the medium, reduce the friction between the relative surfaces of hydraulic components, improve the reliability of the system, and ensure the safe and efficient operation of hydraulic system and lubrication system. The key characteristics of hydraulic filter elements of the HY PRO filter cross reference include their filtration efficiency, flow rate, dirt holding capacity, and pressure drop. The filtration efficiency refers to the filter's ability to remove contaminants of a particular size, typically measured in microns. The flow rate refers to the amount of fluid that can pass through the filter element in a given time. The dirt holding capacity is the amount of contaminants that the filter element can hold before needing replacement. The pressure drop is the decrease in pressure that occurs across the filter element due to the resistance of the fluid passing through it. Understanding these characteristics is critical to selecting the appropriate hydraulic filter element for a specific application, ensuring optimal performance, and prolonging the life of the hydraulic system. As a filter cartridge supplier, we will do our best to meet all the needs of customers.

Hydraulic filter cartridge elements for HYDAC replacement are essential components in hydraulic systems that help maintain the cleanliness and performance of hydraulic fluids. These filter elements are specifically designed to remove contaminants such as dirt, debris, metal particles, and other impurities from hydraulic fluids, ensuring the smooth operation and longevity of hydraulic equipment. Hydraulic filter cartridge elements in HYDAC filter element cross reference are engineered to effectively capture and retain contaminants that can cause system failures and reduce overall hydraulic system performance. These elements typically consist of a pleated filter media enclosed within a cartridge housing. The filter media may be made of materials such as cellulose, synthetic fibers, or metal mesh, depending on the specific requirements of the hydraulic filter element. It is supported by thickened steel plate skeleton, which has strong pressure reduction, and the phenomenon of "unloading" will not occur due to the increase of pressure in the filtration process. When the fluid enters the filter, its impurities are blocked, while the clean filtrate is discharged from the filter. When cleaning is needed, just take the fuel filter element out of the filter, treat it with industrial liquid and put it in. HYDAC Replacement Hydraulic Filter Elements Maintenance Clean filters help protect hydraulic system components from premature wear and damage. By removing contaminants, the filter from our filter element suppliers reduces the risk of abrasive particles causing excessive friction and degradation. Proper maintenance of hydraulic filters is essential to ensure optimal performance and longevity of hydraulic systems. Regular cleaning of these filters plays a crucial role in removing contaminants and preserving the system's efficiency. Tools needed including compressed air source or soft brush, cleaning solution recommended by the manufacturer, clean water source, suitable container for soaking, safety gloves and eye protection. First, remove the cartridge filter element from the system according to manufacturer instructions; secondly, inspect the element for damage or excessive wear, third, use compressed air or a soft brush to remove loose debris; next, rinse the element thoroughly with clean water; finally, allow the element to air-dry completely in a clean, well-ventilated area. Hydraulic Filter Element Advantages 316/304 stainless steel support layer, thousands of experiments have tested that it does not break under high strength and filters stably. Precision machinery, high standard drilling, strong pressure bearing capacity, uniform stress, prolonging the service life of filter element by 25%. HYDAC replacement hydraulic filter cartridge elements efficiently remove solid particles, water, sludge, and other contaminants from hydraulic fluids, preventing them from circulating and causing damage to sensitive hydraulic components. By removing contaminants, hydraulic filter cartridge elements of HYDAC filter cross reference help protect hydraulic pumps, valves, cylinders, and other components from premature wear and damage, thereby extending their operational life. Clean hydraulic fluid ensures optimal system performance, allowing for smooth and precise operation of hydraulic equipment, improved efficiency, and reduced energy consumption. Regularly replacing or cleaning hydraulic filter cartridge elements for HYDAC replacement helps prevent clogs and system malfunctions, reducing costly downtime and maintenance requirements. The porosity of GB/T20100 industrial filter paper is as high as 28%, and it can still filter stably at high viscosity and high temperature.

Minimum Order: 1 bags

Coalescing Filter Cartridge has filter paper+glass fiber and other materials. It has a multi-layer composite filter layer, high filtration accuracy, and large sewage capacity. The sealing ring is firmly bonded with the end cover, sealed well, and the end cover is bonded with resin adhesive, which is waterproof, oil-resistant, strong acid, and alkali-resistant. Coalescing filter cartridge is a vital component of filtration systems designed to remove liquid aerosols or fine liquid droplets from gas or vapor streams. It utilizes the principle of coalescence to effectively merge small liquid droplets into larger ones, enabling their separation from the gas phase. Coalescing cartridge consists of specialized media that facilitate the process of coalescence, allowing for efficient removal of liquid contaminants. These coalescing filter element replacements are commonly used in various industrial applications where the presence of liquid aerosols or droplets can cause detrimental effects. Industries such as oil and gas, petrochemical, pharmaceutical, and compressed air systems rely on coalescing filter element to ensure the purity and quality of their processes and end products. Coalescing Filter Element Replacement Advantages Coalescing filters have high efficiency in removing small liquid droplets and solid particles from gas or liquid streams. Their unique design and coalescence principle enable effective separation, resulting in cleaner and purer fluids. By efficiently removing contaminants, coalescing filters we filter cartridge manufacturer offered help protect downstream equipment from damage and premature wear. This leads to reduced maintenance costs, extended equipment lifespan, and improved overall system efficiency. Coalescing filters find applications across diverse industries, including oil and gas, automotive, aerospace, pharmaceuticals, food and beverage, and more. They are used for various fluids such as fuels, oils, gases, compressed air, and process liquids. Coalescing filters are typically designed for easy installation and operation. They can be integrated into existing systems without major modifications, and maintenance procedures are straightforward, involving filter element replacements or cleaning. In industries such as manufacturing, coalescing filters play a vital role in ensuring product quality. By removing contaminants, they help maintain consistent production processes, prevent product defects, and meet stringent quality standards. Coalescing filters protect sensitive equipment, such as pneumatic tools, valves, and instruments, from damage caused by contaminants. By maintaining cleaner fluids, these filters help extend the lifespan of equipment, reducing downtime and replacement costs. How to choose coalescing filter cartridge? When choosing the right filter cartridge types of coalescing filter element, several key conditions should be considered in advance. Firstly, assess the operating temperature range to ensure the filter cartridge can withstand the required temperature conditions without compromising its performance. Secondly, consider the desired filtration performance, such as the desired particle size or liquid droplet removal efficiency. Thirdly, evaluate the flow rate and pressure requirements to select a cartridge that can handle the anticipated flow rate without excessive pressure drop. Finally, consider the size compatibility with the existing filtration system to ensure proper installation and compatibility with the system's dimensions. Coalescing Filter Cartridge Specification Usage Material Pattern Performance Oil-water separation Glass fiber Folding and winding Precision filtering Coalescing Filter Cartridge Application Coalescing Filter Cartridge has the dual functions of filtering impurities from turbine oil, transformer oil, aviation materials, gasoline, oil, diesel oil, stone tar, naphtha, etc., and coalescing water from carbon and oxygen compounds such as liquefied petroleum gas, benzene, toluene, xylene, isophane, polybenzene, cyclohexane, cyclohexanol, cyclohexanone, etc. when different coalescing media are used. The coalescing filter element can meet the needs of various coalescing filters used in fixed and mobile installations. In the oil and gas sector, coalescing filter cartridges are employed to purify natural gas and refine crude oil. These coalescing filter element replacement effectively eliminates liquid contaminants such as water and hydrocarbon aerosols, safeguarding downstream equipment from damage and ensuring the quality of the final product. These coalescing cartridges are also vital in fuel processing, preventing the presence of water or particulate matter that could cause engine malfunctions or reduce fuel efficiency. In the chemical and pharmaceutical industries, coalescing filter cartridges are utilized to maintain high purity levels in process streams. They assist in the removal of fine droplets, haze, and solid particles, ensuring product quality and preventing contamination. This coalescing filter replacement is commonly used in pharmaceutical production, where sterile air and gases are required to meet stringent regulatory standards. As one of filter element manufacturers, we will do our best to meet all the needs of customers.

Minimum Order: 1 bags

The coalescing filter element produced and designed by Paier Company, the professional filter cartridge manufacturer, has the dual functions of filtering impurities and coalescing water from aviation kerosene, gasoline, and diesel naphtha, and is an important functional original of the filter separator. PRJ series coalescing cartridges can meet the needs of various filter separators used in fixed and mobile filter facilities. Coalescing Filter Element Types Coalescer element is made of a variety of composite materials by special technology, which has hydrophilic characteristics. It can not only filter out mechanical impurities in the medium, but also separate emulsified water from the medium through demulsification and coalescence, and coalesce it into larger water droplets, so as to further realize the purification of the medium. Coalescing filter elements are available in various types, each designed to cater to specific filtration requirements and operating conditions. These different types of coalescing elements offer distinct features and functionalities, allowing for customized filtration solutions across a wide range of applications. We coalescing filter element manufacturers offer the equivalent of (PECO) coalescing filter cartridge, the equivalent of (Velcon) coalescing filter cartridge, the equivalent of (PALL) coalescing filter cartridge, the equivalent of (JONELL) coalescer cartridge and so on. If you are still looking for coalescing filter cartridge, come to contact us for more details of elements. Coalescing Filter Cartridge Advantage Glass fiber coalescence filter element High-density gradient glass fiber can efficiently coalesce liquid mist and droplets in airflow, with high filtration accuracy. Stable structure, no shedding of dielectric fibers, no pollution to the environment and downstream products. Good compatibility with various fluids; Good environmental protection, 100% synthetic material, complete combustion without residue. Coalescing Filter Element FAQs  What is a Coalescing Filter Element? Coalescing filter element is made of a variety of composite materials by special technology, which has hydrophilic characteristics. A coalescing filter element is a type of filter used to remove liquid aerosols, oil mist, and other fine particulate matter from a gas stream. The element typically consists of multiple layers of media, including a pre-filter and a coalescing layer. The pre filter cartridge captures larger particles and protects the coalescing layer, which is designed to merge small liquid droplets into larger ones. As the droplets coalesce, they become heavier and fall out of the gas stream, allowing for their removal through a drain. Coalescing filter elements are commonly used in compressed air systems, where they help protect downstream equipment from damage and prevent contamination of the final product. They can also be used in industrial processes, such as natural gas and petroleum refining, to remove impurities and improve product quality. Coalescer Filter Element Application Coalescer filter elements play a crucial role in the fuel and diesel industry by removing water or moisture contamination. When fuel or diesel is stored or transported, it can come into contact with humid air, resulting in the formation of water droplets. These water droplets can cause corrosion, reduce fuel efficiency, and lead to engine damage. Coalescer filter elements employ a unique design that utilizes filtration media with hydrophobic properties. As the fuel or diesel flows through the filter element, the hydrophobic media captures and merges small water droplets, causing them to coalesce into larger droplets. In natural gas processing and transmission, coalescer filter elements are utilized to remove liquid and solid contaminants from the gas stream. Natural gas often contains moisture, hydrocarbon liquids, and particulate matter, which can damage equipment, reduce efficiency, and compromise the quality of the gas. Coalescer filter elements are also used in the filtration of chemical materials to separate immiscible liquids or remove liquid impurities. In chemical processes, it is often essential to separate different liquid phases or remove contaminants that can affect the quality or performance of the final product.

Minimum Order: 1 bags

Filter Elements & Filter Cartridge For Sale The filter element can purify the polluted media, and achieve the cleanliness required by our production and life, with a certain degree of cleanliness. Filters are widely used, ranging from industrial products such as iron and steel smelting, electric power production, and ocean purification, etc. to domestic drinking water treatment, domestic garbage utilization, automobile burning filtration, bicycle lubricating oil filtration, etc. Therefore, cartridge filter elements are used in clean technologies in our lives. The hydraulic system is divided into an oil suction filter, pipeline filter, and oil return filter. Filter Element & Filter Cartridge Types Filter cartridges are essential components in various industrial and commercial applications that require the removal of impurities and contaminants from liquids and gases. These OEM filter cartridges come in different shapes, sizes, and materials, and are designed to filter out particles of different sizes and types. There are several filter cartridges types available provided by our filter element company, such as coalescing filter element, separator element, pre-filter cartridge, and hydraulic filter element and so on, each designed for specific applications and environments. Each type has unique features and benefits, and choosing the right one for a specific application depends on factors such as the type of fluid or gas being filtered, the flow rate and pressure, and the level of filtration required. Filter Element Characteristics Precision filter element permeability High efficiency of precision filter element Precision filter element airtightness Corrosion resistance of precision filter element Filter Element Characteristics Filter Element Characteristics Filter Element Characteristics Filter Element Characteristics The filter element is made of American fiber filter material with strong hydrophobicity and oleophobicity, and the framework with good permeability and high strength is adopted to reduce the resistance caused by passing. The filter core adopts a German fine-perforated sponge, which can effectively prevent oil and water from being carried away by high-speed airflow so that the small oil droplets passing by gather at the lower end of the filter core sponge and are discharged to the bottom of the filter container. A reliable sealing ring is adopted at the junction of the filter element and the filter shell to ensure that the air flow is not short-circuited and prevent impurities from directly entering the downstream without passing through the filtration elements. Anti-corrosion reinforced nylon end cover and anti-corrosion filter core framework are adopted for filter core, which can be used in severe working conditions. Filter Cartridge Installation Before Installation: 1. Inspect the cartridge: Thoroughly examine the filter cartridge for any signs of damage, such as cracks, tears, or deformities. 2. Prepare the installation area: Ensure the installation area is clean, well- ventilated, and free from any debris that may contaminate the cartridge or hinder installation. 3. Turn off the system: Prior to installation, shut off the power supply and isolate the filtration system to prevent accidental activation. During Installation: 1. Follow instructions precisely: Carefully follow the manufacturer's installation guidelines step by step. 2. Align the cartridge correctly: Ensure the cartridge is properly aligned with the designated housing or holder. 3. Apply appropriate torque: When tightening the cartridge into the housing, use the recommended torque specifications provided by the manufacturer. After Installation: 1. Check for leaks: After installation, inspect the system for any signs of leakage. Ensure all connections are tight and secure. 2. Perform system flush: Before returning the filtration system to normal operation, flush the system for a sufficient duration to remove any air or impurities that may have entered during installation. 3. Regular maintenance and monitoring: Monitoring pressure differentials, flow rates, and overall system performance will help detect any anomalies early on and ensure the filter cartridge is operating optimally. Filter Element Typical Applications Filter cartridges have various applications across different industries. Electronic industry: pre-filtration of the reverse osmosis water system and pre-filtration of the deionized water system, remove impurities from chemicals used in the production of electronic components, such as semiconductors and printed circuit boards.

Minimum Order: 1 bags