Industrial Machinery & Equipment

Product Details: Weight：34KG Electrical connection: 110V/220V 50HZ/60HZ Power：450W Operation interface: English/Chinese (LCD display) Machine dimension: 450*420*290mm Wire length range：1～10000mm Strip length：Front end:0- 15;rear end:0- 15mm Length accuracy： ± (0.002xL)mm Branching wire width: 2- 12P Dimension of flat tube: length 100mm*width 22mm* height 4mm Suitable for stripping wire: flat wire Blade material: hard tungsten steel Transport speed: (L= 100MM piece/hour） 3000-5000 pieces Driving mode: four-wheel drive (silent hybrid stepper motor, 0. 1mm forward per step) Stripping speed: The cutting speed and wire feeding speed can be adjusted respectively. (0 is the slowest, 9 is the fastest)

Minimum Order: 1 bags

rotary piston pump model H-150 Specifications Power: 11kw/15kw Capacity: 150L/S Motor voltage: 380V, 50HZ, 3phase (Different voltage and frequency can be provided according to client requirements) Applications: vacuum coating, vacuum heat treatment, vacuum impregnation, vacuum smelting, vacuum metallurgy, vacuum drying, molecular distillation, simulation experiments in aviation, aerospace, and related fields, mono crystal furnace, etc. Remark: we also supply side channel blower, centrifugal fan, rotary vane vacuum pump, dry scroll vacuum pump, rotary piston vacuum pump, diaphragm pump, reciprocating pump, molecular pump, oil diffusion pump, etc.

Minimum Order: 1 bags

diaphragm pump QBY3 series Features Simple structure, easy to use High flow rate (flow rate up to 1000 L/min) Stable air flow Low noise No oil lubrication Material can be made of aluminum, cast steel, PP plastic, fluoro plastic, stainless steel, ductile iron, etc. Both air diaphragm pump and electric diaphragm pump are available. Applications Food, oil & gas, water treatment, coating, automobile manufacturing, chemical transfer, etc. Remark: we also supply side channel blower, centrifugal fan, rotary vane vacuum pump, dry scroll vacuum pump, rotary piston vacuum pump, diaphragm pump, reciprocating pump, molecular pump, oil diffusion pump, etc.

Minimum Order: 1 bags

SVF-5 dry scroll vacuum pump Features This pump has all the advantages of traditional dry scroll pumps. Top-seal-free design eliminates PTFE abrasion particles and eliminates the need for periodic seal replacement. Virtually no wearing parts, requiring no routine maintenance, long service life. Operates reliably across a wider ambient temperature range (traditional scroll pumps only run between 12-40°C). High sealing performance. It can achieve higher vacuum. Capacity is stronger near ultimate vacuum. Exceptional reliability with robust handling of water vapor, alcohol, acetone, and similar substances. Delivers clean vacuum through oil-free operation, preventing environmental contamination. Operates in any spatial orientation with no installation restrictions. Specifications Capacit , y: 5 L/min Power: ≤20 W Motor type: brushless DC motor Motor voltage: 12 V Motor speed: 3600 RPM Cooling: air cooling Working temperature: -20 ℃ to 40 ℃ Applications Portable mass spectrometer Gas sampling Biological culture dishes Laboratory Fluorescence spectrometer Analytical instruments Environmental science Metallurgical smelting Gas transfer Remark: we also supply side channel blower, centrifugal fan, rotary vane vacuum pump, dry scroll vacuum pump, rotary piston vacuum pump, diaphragm pump, reciprocating pump, molecular pump, oil diffusion pump, etc.

Minimum Order: 1 bags

BSV90 double stage rotary vane vacuum pump Features and advantages This vacuum pump is compact, low noise, high speed, convenient start- up which is designed for reliable, long-term operation in both laboratory and industrial environments. 1.The use of non-spring rotary vane to avoid pump stoppage faults caused by spring breakage. 2.With built-in forced fed oil type, stable air exhaust performance can be achieved during continuous operation near the atmospheric pressure. 3.Adopt an hydraulic oil anti-sucking back system. Specifications Motor power: 3.7 kw Capacity: 90 m³/h (under 50HZ), 108m³/h (under 60HZ) Ultimate pressure: 2 Pa (with gas ballast valve open), 50*10-1 Pa (with gas ballast valve closed) Motor voltage: 380V, 50HZ, 3phase (Different motor voltage and frequency can be made according to requirements) Oil capacity: 2.5-4.2 liter Net weight: 101 kg Remark: we also supply side channel blower, centrifugal fan, rotary vane vacuum pump, dry scroll vacuum pump, rotary piston vacuum pump, diaphragm pump, reciprocating pump, molecular pump, oil diffusion pump, etc.

Minimum Order: 1 bags

oil less vacuum pump model AP-1400V Features: Low noise Light size Beautiful appearance Simple structure Easy maintenance No oil and gas Specifications: Motor voltage and frequency: 220V/50HZ Motor protection class: B Power: 450W Max air flow: 7.2m³/h (120L/min) Max vacuum: -700mmHg (-92kpa) Net weight: 8.5kg Size (L*W*H): 244*128*186.3 mm Noise: ≤58dB(A) Ambient temperature: 5-40℃ Cold insulation resistance: ≥100MΩ Air inlet and outlet thread: 1/4-19PT Applications Medical equipment Printing equipment Packaging equipment Food equipment Beauty and slimming equipment Environmental protection equipment Experimental instruments and automated electronic and electrical equipment Dental & optical equipment Blood & laboratory analyzers Laboratory air dryers Aspirators Respirators Vacuum frames Purging systems Vacuum clamps Remark: we also supply side channel blower, centrifugal fan, rotary vane vacuum pump, dry scroll vacuum pump, rotary piston vacuum pump, diaphragm pump, reciprocating pump, molecular pump, oil diffusion pump, etc.

Minimum Order: 1 bags

air pump model ZYBW80E Specifications: Power: 2.2/3kw Capacity: 80m³/h Vacuum: -60kpa Motor voltage: 380V, 50HZ, 3phase (different motor voltage and frequency can be made according to requirements) Application: printing machinery Remark: we also supply side channel blower, centrifugal fan, rotary vane vacuum pump, dry scroll vacuum pump, rotary piston vacuum pump, diaphragm pump, reciprocating pump, molecular pump, oil diffusion pump, etc.

Minimum Order: 1 bags

Using power supply：AC 220V/50Hz Vibration disk power：300w Terminal machine motor：1.5KW.H Main board power：2.2KW Terminal machine light：LED:220V Pressing ability：20KN Slide stroke：40mm(48mm) Closing height：26mm Closing height adjustment amoun：10mm Weight：Approximately 200KG External dimensions of the fuselage：1050*500*1360mm Size after packaging：1220*700*1500mm Weight after packaging：270KG Volume after packaging：1.281 cubic

Greentech International (Zhangqiu) Co., Ltd is the professional roots blower supplier. The NSRH type clover spiral Roots blower on the basis of the manufacture and sale of a Roots blower for many years the development of new products using new technology. The machine through the use of new lines on the impeller, the overall adiabatic efficiency and volumetric efficiency is further improved, and is excellent particularly in the fan of the air volume and pressure characteristics. So-called excellent efficiency is the amount of heat generation of the wind turbine itself is reduced, i. e. The temperature rise dropped, the various models using the exhaust pressure in the dry state is up to 1kgf/cm2. Duty: Bore: 50 ~ 300mm Flow capacity: 0.5 ~ 134.1m3/min Pressure rise: 9.8kPa~98.8kPa Vacuum: -49kPa Application: Mainly used in sewage treatment (aeration), powder conveyor (cement, feed, etc. ), combustion furnace, washing, vacuum packaging. Features of Series NSRH Tri-Lobe Roots Blower: 1. Each model has a performance table and standard specification, easy to select fan model; 2 Including attachments, fan body to standardize. Mass production system, to be able to meet your requirements at any time; 3. Because there are good helix structure, and using the same fan matching a muffler with a silent air cleaner, the operating noise of the fan is much lower than in the past; 4. Rotor is fully machining precision products. Has been made in the manufacture of the complete dynamic balance, almost no vibration. 5. To take a small design, small mounting area.Greentech Industry (Jinan) Co., Ltd. Greentech International (Zhangqiu) Co.,Ltd Tel:+86-531-83117088, 83270018 Skype: guanglin_jiang WhatsApp: +86-13869171699 Email: greentech@vip.163.com http://www.china-blower.c , om www.facebook.com/100026385873611 www.tikt , ok.com/@davidlau965 www.youtube.com/@gaoanna-s7 , u https://www.instagram.com/gaoanna77/ www.greentechblower.com

Minimum Order: 5 dozens

1.1Main functions This device can achieve functions such as automatic discharge, feeding, coiling, tightening, and cutting of disorderly tie straps, as follows: 1.Put the disordered zip ties into the automatic discharge device to transport the zip ties through the pipeline to the gun head; 2.Manually buckle the board machine to achieve automatic feeding, winding, tightening, cutting, and collecting of waste materials, and strictly prohibit waste materials from entering the two components during the collection process; 3.After cutting the thread, tie the head and leave a tail of 1-3mm; 1.2Main components of the equipment

Minimum Order: 1 bags

Specification: 1, Hexagonal free mode servo terminal crimping machine 2, Free mode servo terminal crimping machine 3, Servo terminal crimping machine Product Parameters Power：220v50Hz Weight：160kg Dimensions：700×860×1260mm Crimping force：200KN Stripping length：1.5-10mm Diameter. Max：38mm Crimping width：12.5mm (Can be special ordered )

Minimum Order: 1 bags

The WHD1000 belongs to YZH's WH Series Breaker Booms, primarily designed for secondary crushing operations in mining and similar scenarios. Below is a detailed introduction covering its features, advantages, and specific case studies: Main parameters of WHD1000 Pedestal Rockbreaker: Model No. WHD1000 Boom weight(without hammer) 10930KG Max.Horizontal Working radius 12530mm Max.vertical working radius 9350mm Min.vertical working radius 4000mm Max.Height 8620mm The Features of WHD1000 Pedestal Rockbreaker: This robotic arm employs an electro-hydraulic drive system paired with a dedicated power unit, achieving optimal efficiency between the working arm and hydraulic hammer. Its boom is constructed from rectangular steel, featuring large-diameter cylinders and reinforced pins. The slewing motor incorporates a buffer brake, complemented by a high-performance shock absorption system that minimizes impact loads during operation. It supports multiple control methods including cab operation, wireless remote control, and fiber-optic 5G remote operation. Remote control range extends to 10-20km, with flexible control enabling precise positioning. Its modular design accommodates various front-end tools like hydraulic hammers and lotus claws, adapting to different tasks such as crushing and grabbing. The Benefits of WHD1000 Pedestal Rockbreaker: First, energy-efficient and economical—its motor-driven system produces zero emissions, reducing energy consumption by over 60% compared to traditional diesel equipment. Operating costs are only one-sixth of fuel expenses for excavators of equivalent power. Second, high efficiency with low failure rates —equipped with a premium hydraulic breaker, it boosts crushing output by 20% while reducing failure rates by 85% compared to conventional diesel units, ensuring uninterrupted operation. Third, strong adaptability enables long-term operation in harsh environments like corrosion, explosion-proof zones, and high altitudes. Customization is available based on client conditions and environmental factors. Fourth, low maintenance costs stem from optimized structural design and reliable core components, facilitating easy upkeep while reducing crusher wear and extending the entire production line's lifespan. The Application of WHD1000 Pedestal Rockbreaker: Hongshi Cement Group Customization Case: Hongshi Cement Group has repeatedly customized this series of fixed mechanical arms for raw material crushing in cement production. Installed at the crusher feed hopper, the arms specifically handle large, hard rock blockages, preventing production line shutdowns due to material jams. This improves workers' operating environment, ensures production continuity, and significantly boosts overall cement production efficiency. Large Mining Group Application Case: In mining projects for major state-owned enterprises like China National Gold Group and Jinchuan Group, the WHD1000 and its series of robotic arms are deployed at locations such as the feed openings of underground mine skip hoists and the grid openings of open-pit quarries. By performing secondary non-explosive crushing of large ore blocks, it resolves efficiency issues caused by material blockages in mining operations. The remote control mode eliminates personnel exposure in high-risk zones, significantly enhancing mining safety. Metallurgical Industry Application Case: Some metallurgical smelters install this robotic arm beside metallurgical furnaces to process ladle slag. Its powerful crushing force rapidly breaks down large slag chunks, while its quiet hydraulic vibration crushing mode meets environmental requirements in metallurgical workshops. The modular design enables quick tool switching to adapt to different slag processing scenarios, ensuring smooth smelting processes.

Corona surface treatment and Plasma surface treatment equipment is used to “prime” a surface prior to the printing, coating, or painting process. NaenTech offers reliable, high-performance plasma and corona surface treatment solutions from industry-leading manufacturers. Our corona surface treatment equipment offers an extremely efficient method to increase surface energy and improve adhesion in printing, laminating and any other application requiring effective surface treatment.  Corona Plasma Treatment Machine is a surface modification technique using corona discharge treatment to achieve the changes to the surface properties. The aim of this surface treatment is to increase the adhesion and bond strength of substrates such as plastic films, polymers, elastomers, rubber, composites, glass and foam. Treating the material surface with corona treater will ensure the bonding with printing inks, coatings and adhesives.

The plasma etch process is the removal of certain material from another substrate surface to leave a desired pattern. A mask helps prevent the material underneath from being etched. In general, the process in the plasma etching system involves ion bombardment to remove material. The process gas should be chosen so the rate of removal of the uncovered material is higher than the removal rate of the masking material. This process is generally used in the semiconductor industries. Plasma Etching Cleaner is a reactive ion etching device for semiconductor microfabrication dry etching. It features a compact design, simple operation, and excellent process repeatability. With the RIE plasma etching mode, it offers fast etching, high uniformity, high selectivity, and strong anisotropy. Plasma Etching Systems Features： RIE mode for high-selectivity anisotropic etching, meeting strict process demands. Full - area gas showerhead and axisymmetric exhaust ensure high process uniformity and speed. Heating and lower electrode cooling maintain stable etching temperature, rate, and uniformity. 13.56MHz solid - state RF plasma power with auto impedance matching guarantees optimal plasma density and repeatability. Three gas channels with high - precision flow meters enable flexible process and gas selection. Applications: Etching materials like Si, SiO2, SiN, Poly-Si, GaAs, Mo, Pt, polyimide, etc. Photoresist ashing, hydrophilic and hydrophobic modification, surface energy enhancement, introduction of functional groups, improvement of biocompatibility, etc.