Industrial Machinery & Equipment

Model: CEP Series; Brand: Comair Working Power: 37-250 KW; Working Pressure: 8-18 Bar; Free Air Delivery: 6.2-40 m3/min Product Features COMAIR Electric portable air compressor   Features: 1. High reliability: The compressor has few parts and no wearing parts, so it operates reliably and has a long service life. The interval between overhauls can reach 40,000-80,000 hours. 2. Convenient operation and maintenance: the degree of automation is high, and the operator does not have to undergo long-term professional training, and can realize unattended operation. 3. Good power balance: no unbalanced inertial force, smooth high-speed operation, and baseless operation, especially suitable for mobile compressors, small size, light weight, and small footprint 4. Strong adaptability: It has the characteristics of forced gas transmission, the volume flow is almost not affected by the discharge pressure, and can maintain high efficiency in a wide speed range. 5. Electric mobile screw air compressor, power range 11-250KW, exhaust range covers 40m³ / min. Each basic model can be changed into a series of products with different exhaust volume and different exhaust pressure according to user needs.   Product details: 1. Air end The patented design of the large-diameter rotor, the anr end and the motor are directly connected through a high elastic coupling, there is no speed- increasing gear in the middle, the main engine speed is consistent with the motor, the efficiency is higher, the reliability is better, and the life is longer. 2. Motor machine The high-efficiency motor specially used for air compressor is selected, the motor has a large margin design, and the starting torque is large, which can meet the requirements of full life use under various working conditions. 3. The air volume control system is simple and reliable There is an automatic loading and unloading function, which can automatically adjust the gas volume according to the amount of gas consumption. 4. Microcomputer can only monitor The microcomputer can monitor the operating parameters such as exhaust pressure, exhaust temperature, current and voltage of the air compressor, and has automatic alarm and shutdown protection functions. 5. Multi-stage air filter Suitable for dusty working environment; super-large cooler, suitable for high temperature and plateau environment. 6. Spacious maintenance door The parts to be maintained are all within reach, maintenance of the air filter, oil filter, oil core and cooler is easy and easy, reducing downtime. 7. Easy to move It can still move flexibly under harsh terrain conditions. Each compressor is equipped with a lifting ring for safe and convenient lifting and transportation.

Basic Information Model: COI- Series; Brand: Comair Working Power:22-355 KW; Working Pressure: 8-13 Bar; Free Air Delivery: 2.8-61 m3/min Product Features Durable, efficient and stable air end  1. The design idea of "large rotor, large bearing, low speed" is adopted to reduce noise and vibration and increase the life and stability of the host. 2. The tooth surface is processed by the German KAPP rotor grinder to create a high-precision rotor, which is the first guarantee of high efficiency and stability of the air end. 3. Adopt a new type of 5: 6 asymmetric rotor tooth shape, high-precision three- coordinate measuring machine for comprehensive measurement, increase the air capacity by 5% -10% 4. All imported quality bearings are used. Specialized motor for air compressor  1. Imported brand bearings, protection class IP54, insulation class F, suitable for harsh environments such as large dust and high temperature. 2. IE3 high-efficiency motor uses less electricity and reduces your cost of use. 3. The motor is designed according to the 1.2 coefficient, and the starting torque is large, which can meet the requirements of full life use under various working conditions. High-quality and efficient coupling  1. The coupling is a torsionally elastic coupling with failure protection function, which can effectively damp and reduce the vibration and shock generated during the operation.  2. The elastic body is only under pressure and can withstand greater loads. The drum-shaped teeth of the elastic body can avoid stress concentration. Stable and reliable electronic control system  1. The control system has the functions of voltage detection, three-phase unbalance detection, overpressure, overtemperature, overload, and overrun alarm high alarm functions, real-time protection of the unit, automatic monitoring of operating conditions, automatic loading and unloading, sleep and restart And other functions, no need to be supervised by someone. 2. The standard Internet of Things system allows you to see the running status of your machine on your phone. 3. The intelligent control system can be set in both Chinese and English, and can realize the joint control of multiple units. 4. Choose high-quality electrical components, and the contactors are imported brands. 5. Emergency stop function, a push-type emergency stop switch is installed in a prominent position of the unit, and it can stop immediately in an emergency. Inner rotor fan  1. IP44 cooling fan, Class F insulation; 2. Compared with the outer rotor fan, the inner rotor fan has higher air pressure, more air volume, and better cooling effect; 3. Due to high wind pressure, the cooler and filter are less likely to be blocked Three filters  Air filter: the filter area exceeds 150% of the normal requirement, low the inlet pressure loss , and high energy efficiency ; Oil filter: The design of the imported oil filter with enlarged glass fiber material is adopted. The rated processing capacity of the oil filter is ≥1.3 times of the circulating oil volume. The filtering accuracy is high and the durability is good. Oil separator: imported glass fiber material oil core, good filtration effect, low oil core pressure loss. Inlet valve  Inlet valve: low flow speed test, low pressure loss, reduce energy consumption; Minimum pressure check valve: low pressure loss, precise control, ultra-fast repositioning to ensure that the user's air does not return. Temperature control valve: Mixed flow temperature control valve: The unit is equipped with a mixed flow temperature control valve to ensure that the unit is more convenient to start in a low temperature environment, and to ensure the unit is in the best performance state by controlling the oil supply temperature of the air end Oil-injected screw compressors use oil to lubricate, seal, and cool the compressor components during operation. Our Oil-Injected Compressor is engineered for high-performance applications that require reliable and powerful air compression. Ideal for industrial and commercial use, this compressor utilizes an oil lubrication system to enhance efficiency, extend the lifespan of the machine, and provide optimal cooling during operation. Choose our Oil-Injected Compressor for a powerful, efficient, and reliable solution to all your air compression needs, ensuring your operations run smoothly and effectively!

Model: COFW Series; Brand: Comair Working Power: 7.5-250 KW; Working Pressure: 7.0-10.0 Bar; Free Air Delivery: 1.0-43 m3/min Product Features ■ Stable and reliable air end, water lubricated, 100% oil-free, quality assurance. ■ IE3 motor, save your electricity cost, IP54, B-level temperature rise is suitable for harsh environments such as large dust and high temperature; ■ Coupling connection, more energy saving; ■ Multiple noise reduction design, calculated according to noise theory, with special flame retardant muffler cotton inside, to reduce the noise of the unit and provide a quieter use environment. ■ Multi-function intake valve group, start without load, motor load is small. Use high-efficiency filters to effectively filter particulates in the air; ■ Axial fan with tube-fin cooler has high wind pressure and low noise. It is exhausted upward through a specially designed air duct to prevent hot air from returning; ■ Modular design of water cooler, vertical installation, high heat exchange efficiency, stable operation and long service life; ■ Optimized shock absorption pad to reduce vibration and noise; ■ Routine maintenance parts adopt openable door panels, the installation position is easy to replace, and maintenance is more convenient. ■ Motor overload protection. ■ The pipeline system is designed according to the design pressure, and the reasonable pipeline is selected, the pipeline pressure loss is low, and the energy efficiency of the unit is improved ■ The use of 304 stainless steel pipes will not rust and corrode even under high temperature and humidity conditions, and the service life is longer ■ Separate design for cold and hot zone, no heat zone inside the unit, electrical components are in low temperature zone, longer service life ■ Dedicated control system, multi-channel pressure sensor and multi-channel temperature sensor to comprehensively detect the running state of the unit; the user interface is more friendly, the control is more accurate and reliable.

Model: CFL Series; Brand: Comair Working Power: 2.2-33 KW; Working Pressure: 8.0-10.0 Bar; Free Air Delivery: 0.21-3.72 m3/min Our Oil-Free Scroll Air Compressor is a compact and efficient solution for applications that require clean, dry air without the risk of contamination. Utilizing advanced scroll technology, this compressor delivers reliable performance, making it ideal for a wide range of industries, including healthcare, food and beverage, and electronics.   Oil Free Scroll Air Compressor Features The quality of compressed air is the key to users. Oil, oil mist, water, and particles are the three major factors affecting the quality of compressed air. ISO8573-1:2010 has made a strict definition of the quality standard of compressed air, especially the oil content standard of compressed air. We are fully aware of the importance of compressed air quality to users, and provide users with zero risk (zero risk of pollution, zero risk of damaged or unsafe products, zero risk of operational interruption) compressed air that meets the Class0 standard to help you compete Be successful. Oil-Free Design: Eliminates oil contamination, ensuring high-quality, pure air output suitable for sensitive applications. Low Noise Operation: Designed for quiet performance, making it perfect for environments where noise reduction is important, such as offices and medical facilities. Energy Efficient: Engineered to consume less power while providing consistent airflow, helping to reduce operational costs. Compact Size: Space-saving design allows for easy installation in tight areas, perfect for both industrial and commercial settings. Minimal Maintenance: With fewer moving parts and no oil changes required, maintenance is simple and cost-effective. Durable Construction: Built with high-quality materials for long-lasting reliability and performance, even in demanding conditions. Versatile Applications: Ideal for powering pneumatic tools, airbrushes, and medical equipment, as well as for use in laboratory settings. Integrated Controls: Features user-friendly controls for easy operation and monitoring of performance.

Oil Free Screw Air Compressor Model: CFW Series; Brand: Comair Working Power: 45-250 KW; 60-350 HP; Working Pressure: 2.5, 3.5, 7.0-10.0 Bar; 37, 51, 102-145 Psig Free Air Delivery: 244-1625cfm; 6.9-46 m3/min Our Oil-Free Screw Air Compressor, engineered for reliable, high-performance air compression without the need for oil lubrication. This innovative compressor is perfect for applications that require clean, dry air, making it ideal for industries such as food and beverage, pharmaceuticals, and electronics manufacturing.   Product Features ■ Industry-leading air end, imported brand, quality assurance. ■ IE3 motor, save your electricity cost, IP54, B-level temperature rise is suitable for harsh environments such as large dust and high temperature; ■ Coupling connection, more energy saving; ■ Multiple noise reduction design, calculated according to noise theory, with special flame retardant muffler cotton inside, to reduce the noise of the unit and provide a quieter environment for use. ■ Independent air inlet, reduce intake resistance, multi-function intake valve group, start without load, motor load is small. Use high-efficiency filters to effectively filter particulates in the air; ■ Centrifugal fan with plate-fin cooler has high wind pressure, low noise, external independent suction, exhaust air upward through a specially designed air duct to prevent hot air from returning; cooler modular design, vertical installation, effectively eliminate thermal stress, More stable operation and long service life; ■ Optimized shock absorption pad to reduce vibration and noise; ■ Routine maintenance parts adopt openable door panels, the installation position is easy to replace, and maintenance is more convenient ■ Oil Free Screw Air Compressor with Motor overload protection ■ The pipeline system is designed according to the design pressure, and the reasonable pipeline is selected, the pipeline pressure loss is low, and the energy efficiency of the unit is improved ■ All 304 stainless steel pipes are used, even under high temperature and high humidity conditions, it will not rust and corrode, and the service life is longer ■ Separate design for cold and hot zone, no heat zone inside the unit, electrical components are in low temperature zone, longer service life ■ Dedicated control system, multi-channel pressure sensor and multi-channel temperature sensor to comprehensively detect the running state of the unit; the user interface is more friendly, the control is more accurate and reliable. ■ The unit is equipped with an Internet of Things system, which can monitor the machine status on the mobile phone.

Plano convex cylindrical lens has one flat and one convex surface, the typical application of plano convex cylindrical lens is one-dimensional amplification or compression, spherical lenses act symmetrically on incident light in two directions, while cylindrical lenses only act on incident light in one direction, a typical application is to use a pair of cylindrical lenses to shape deformed beams. Parameter Ranges Material Optical Glasses, Fused Silica, Infrared Material, etc. Dimension Range 0.5~350mm Dimension Tolerance +/-0.01mm Focal Length Tolerance +/-1% PV 1/10 Lambda Surface Quality 20-10 Centration ＜ 30" Clear Aperture > 90% of diameter Bevel 0.2mm×45° Coating As customer's request   The Application of Cylindrical Lens Cylindrical lens can be used for correcting astigmatism in systems, and are widely used in high-precision testing instruments and devices, such as high- power lasers and long-distance offline interferometers. Cylindrical lenses are often used in industries such as synchrotron radiation beam lines, barcode scanners and strong laser systems, electronic optical metrology verification, laser scanners, spectroscopy, laser diode output light shaping and beauty, and light film lighting fixtures at the same time. It is also widely used in the fields of astronomy, medical, and industry, such as telescopes, endoscopes, and surgical microscopes, laser cutting machines, and micro processing machines. Cylindrical lenses are commonly used as laser line generators, or to adjust image height size or correct for astigmatism in imaging systems. JT produces high precision cylindrical lenses in plano convex, double convex, and plano concave, double concave, meniscus, achromatic doublets and triplets, develop and manufacture high-end optics from 0.5 mm to 350 mm in diameter, which are used in many different fields of application, such as projection systems, imaging systems, analytical instruments, optical instruments, and laser measuring systems, etc.

Minimum Order: 1 bags

JT can customize hemispherical or super hemispherical domes according to customers’ requirements, which are mainly used to protect precision instruments and cameras used in harsh environments, and is often used for deep- sea submersibles, deep-sea equipment monitoring, and underwater robots, optical dome also has a wide range of applications in the meteorological industry at the same time. Parameter Ranges Material  Optical Glasses Diameter  8-350mm Diameter Tolerance  ±0.1mm Wall Thickness  2-30mm Thickness Tolerance  ±0.05mm Height  5-150mm Height Tolerance  ±0.05mm Surface quality  40/20   BK7 or H-K9L offers excellent transmission from 300nm up to 2µm, which is a relatively hard material, with excellent chemical durability, making it a cost-effective solution for VIS to NIR applications, and almost no bubbles or inclusions, JT can process various domes including fairing, hemispherical dome, super hemispherical dome, full thickness dome, perforated dome, flange dome. Optical domes are made of two curved parallel surfaces, this geometric shape protects critical sensors and electronic devices and isolates them from the environment, minimizing damage to the optical path at the same time. Optical domes are commonly used in deep-sea submersibles, deep-sea equipment testing, and underwater robots, which are also widely used in the meteorological industry at the same time. Due to the continuous expansion of application fields, the types and specifications of optical domes provided by JT are also constantly increasing and changing.

Minimum Order: 1 bags

Ball lenses are transparent spherical ball, which has small diameters, sometimes with a few millimeters or even less than a millimeter. It has characteristics of good surface quality, good light reflection, directional reflection, high impact strength, and light weight, etc., which are applied in various areas, such as chemical, aerospace, transportation, light industry, medical, etc. Parameter Ranges Material BK7, Sapphire, Fused Silica lDiameter 1.0～50mm lDiameter Tolerance +/-0.05mm lSphericity 0.05mm lSurface Quality 40-20   The Application of Ball Lens Ball lenses are great optical components for improving signal coupling between fibers, emitters, and detectors. They are also used in endoscopy, bar code scanning, ball pre-forms for aspheric lenses, and sensor applications. Ball lenses are manufactured from a single substrate of glass and can focus or collimate light, depenging upon the geometry of the input source. Half-ball lenses are also common and can be interchanged with full ball lenses if the physical constraints of an application require a more compact design. Spherical lenses are the most used lenses in optical systems design, JT produces high precision spherical lenses in plano convex, double convex, and plano concave, double concave, meniscus, achromatic doublets and triplets, develop and manufacture high-end optics from 0.5 mm to 600 mm in diameter, which use in many different fields of application, from laser material processing to biotechnology, medical technology, defense and security and the semiconductor market, meeting the most stringent requirements.

Minimum Order: 1 bags

For nearly 20 years, JT has been committed to micro lenses and micro prisms processing to meet the rapidly increasing demands of precise visualization. We can reach the dimension of micro lenses as small as 0.5mm, micro prism is less than 0.3mm after continuous technical exploration and improvement, which are applied to the applications, such as life science, industrial endoscopes, optical fiber communication, etc. Such micro optics play a key role in the miniaturization of optical systems. The micro lenses processing requires special capabilities and unique skills, we can reach the dimension of micro lenses as small as 0.5mm, these micro lenses also with short focal length, the short focal length and micro size make it used in lightweight and compact optical systems, such as medical, life sciences, industrial instruments. Parameters Ranges Material: Optical Glasses, Fused Silica, Infrared Material, etc. Dimension Range: 0.5~5.0mm Dimension Tolerance: +/-0.01 mm PV : 1/10 Lambda Surface Quality: 10-5 Centration: ≤30" Coating: As customer's request   The applications of micro lenses Micro lenses are key components for manufacturing large-scale optoelectronic systems, they have the advantages of small size, light weight, and low cost, they can also achieve new functions such as miniaturization, array, integration, imaging, and wavefront conversion that ordinary optical components cannot achieve. JT's micro lenses are mainly used in the field of medical equipment and life sciences, such as endoscopes or fiber bundle endoscopes and microscopic, biochip detection and analysis, retinal imaging, bioimaging and non invasive surgical treatment, as well as industrial, such as fiber optic coupling communication, laser beauty, laser processing, detection, etc.   JT Micro Optics Advantages ● Custom lenses as small as 0.5 mm, prisms less than 0.3mm ● Proprietary technology for prototype to volume production with high- precision manufacturing ● Competitive price and fast delivery ● Trained and qualified engineers and staff are ready to help you

Minimum Order: 1 bags

Fixing Rail: Front Fixed Components height : 5mm Placement speed: 16,000CPH (IPC 9850) Feeder inputs : Max. 80 on 8mm T/F6 Power supply : 200 to 415 VAC, 3-phase Apparent power : 3kVA Operating air pressure : 0.5±0.05Mpa Air consumption : 345L/min (Opt.:Vacuum Pump 50L/min) One multi-nozzle laser head (6 nozzles) Machine dimensions : 1,400×1,393×1,455mm Mass (approximately) : 1,530kg Download Details Feature : The KE series meets the needs of a wide variety of applications with the highest performance. High-speed, high-accuracy component centering using unique laser technology and powerful vision processing. The mounter supports a wide variety of component types due to its highly general versatility, and it can place a subminiature component on a board at high speed and highly precisely. High-precision image recognition/placement of an IC component or an irregularly-shaped component is also possible: this allows you to establish a flexible production line. (Image recognition of a component is an optional function.) Thanks zoey@jinchensmt.co , m

Minimum Order: 1 bags

Buy New SightMark Wraith HD 4-32x50 Digital Riflescope Price : USD 360.00 Min Order : 1 Unit Lead Time : 6 - 9 Days Port : Soekarno–Hatta International Airport Payment : Wise, Bank Transfer, Western union, Xoom, Moneygram & Worldremit Shipment : FedEx, DHL, UPS Product : 100% New original & Warranty Expert Binocular is 100% safe, Because purchase products at Expert Binocular provide a 100% money back guarantee. Site us : https://expertbinocular.com/ Phone/Whatsapp : +6282373690176

Minimum Order: 1 bags

Buy New Sightmark Photon XT 6.5x50 Digital NV Riflescope SM18007-DEMO Price : USD 300.00 Min Order : 1 Unit Lead Time : 6 - 9 Days Port : Soekarno–Hatta International Airport Payment : Wise, Bank Transfer, Western union, Xoom, Moneygram & Worldremit Shipment : FedEx, DHL, UPS Product : 100% New original & Warranty Expert Binocular is 100% safe, Because purchase products at Expert Binocular provide a 100% money back guarantee. Site us : https://expertbinocular.com/ Phone/Whatsapp : +6282373690176

Minimum Order: 1 bags

Buy New Sightmark Photon XT 4.6x42S Digital Night Vision Riflescope R- SM18008 Price : USD 325.00 Min Order : 1 Unit Lead Time : 6 - 9 Days Port : Soekarno–Hatta International Airport Payment : Wise, Bank Transfer, Western union, Xoom, Moneygram & Worldremit Shipment : FedEx, DHL, UPS Product : 100% New original & Warranty Expert Binocular is 100% safe, Because purchase products at Expert Binocular provide a 100% money back guarantee. Site us : https://expertbinocular.com/ Phone/Whatsapp : +6282373690176

Minimum Order: 1 bags

Buy New SightMark Photon RT 6-12x50S Digital Night Vision Riflescope Price : USD 480.00 Min Order : 1 Unit Lead Time : 6 - 9 Days Port : Soekarno–Hatta International Airport Payment : Wise, Bank Transfer, Western union, Xoom, Moneygram & Worldremit Shipment : FedEx, DHL, UPS Product : 100% New original & Warranty Expert Binocular is 100% safe, Because purchase products at Expert Binocular provide a 100% money back guarantee. Site us : https://expertbinocular.com/ Phone/Whatsapp : +6282373690176

Minimum Order: 1 bags