Import-Export Bulletin Board Post an Offer to Sell

New here? Please subscribe
to post trade leads. It's FREE!

Industrial Machinery & Equipment


Home > Offers to Sell > Industrial Machinery & Equipment

Browse leads by category:
    
    
    
    
    
  

Summary of 3/29/24 14:35 GMT:>> Show Compact View
3/13/24 5:06 GMT
CAT Caterpillar 312-2597 NOS Backhoe Plate

A&S Construction Machinery Co., Ltd. supplies all types of plates. All the brands of plates we can provide: CAT plates, KOMATSU plates, JOHN DEERE plates, SANY plates, XCMG plates, VOLVO plates, HITACHI plates, SUMITOMO plates, LIEBHERR plates, DOOSAN plates, CASE plates, BOBCAT plates, KUBOTA plates, YANMAR plates, HYUNDAI plates, DAEWOO plates, etc. For other parts of the brands above, we can also provide cylinder liners, crankshafts, oil pumps, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, reducers, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, controllers, distributors, fuses and relays, harnesses, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc. Contact Us A&S Construction Machinery Co., Ltd. Email: parts@esmachinery.com Website: https://ascmparts.com/ Tel: +(86) 28 8509 8851 Address: 469 Xinsheng Road, Wuhou District, Chengdu, Sichuan, China 610041

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Grace Min
+86-028-85098851

Send Inquiry
A&S Construction Machinery Co., Ltd.
No. 469 Xinsheng Road, Wuhou District, Chengdu City, Sichuan Province, China 610041
Chengdu/Sichuan 610041
China
3/13/24 5:06 GMT
Alternator 344-5081 for Caterpillar 555D 535D 924K 966 631K 627

A&S Construction Machinery Co., Ltd. supplies all types of alternators. All the brands of alternators we can provide: CAT alternators, KOMATSU alternators, JOHN DEERE alternators, SANY alternators, XCMG alternators, VOLVO alternators, HITACHI alternators, SUMITOMO alternators, LIEBHERR alternators, DOOSAN alternators, CASE alternators, BOBCAT alternators, KUBOTA alternators, YANMAR alternators, HYUNDAI alternators, DAEWOO alternators, etc.. For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, reducers, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, cables, controllers, distributors, fuses and relays, harnesses, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc.. Contact Us A&S Construction Machinery Co., Ltd. Email: parts@esmachinery.com Website: https://ascmparts.com/ Tel: +(86) 28 8509 8851 Address: 469 Xinsheng Road, Wuhou District, Chengdu, Sichuan, China 610041

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Grace Min
+86-028-85098851

Send Inquiry
A&S Construction Machinery Co., Ltd.
No. 469 Xinsheng Road, Wuhou District, Chengdu City, Sichuan Province, China 610041
Chengdu/Sichuan 610041
China
3/13/24 5:05 GMT
708-8F-31174 Final Drive Reducer For Komatsu PC200-8

A&S Construction Machinery Co., Ltd. supplies all types of reducers. All the brands of reducers we can provide: CAT reducers, KOMATSU reducers, JOHN DEERE reducers, SANY reducers, XCMG reducers, VOLVO reducers, HITACHI reducers, SUMITOMO reducers, LIEBHERR reducers, DOOSAN reducers, CASE reducers, BOBCAT reducers, KUBOTA reducers, YANMAR reducers, HYUNDAI reducers, DAEWOO reducers, etc. For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, controllers, distributors, fuses and relays, harnesses, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc. Contact Us A&S Construction Machinery Co., Ltd. Email: parts@esmachinery.com Website: https://ascmparts.com/ Tel: +(86) 28 8509 8851 Address: 469 Xinsheng Road, Wuhou District, Chengdu, Sichuan, China 610041

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Grace Min
+86-028-85098851

Send Inquiry
A&S Construction Machinery Co., Ltd.
No. 469 Xinsheng Road, Wuhou District, Chengdu City, Sichuan Province, China 610041
Chengdu/Sichuan 610041
China
3/12/24 9:18 GMT
PP meltblown cartridge

PP meltblown cartridge is a tubular cartridge made of non-toxic and odorless polypropylene particles, which is heated and melted, spewed, traction and accepted for forming, and is used in water purification in large quantities. It also has outstanding chemical compatibility and is suitable for the filtration of strong acid, strong alkali and organic solvents. This kind of cartridge is a kind of fixed pore size deep filtration core with ultra-fine polypropylene fiber filter media, and the filter material meets the relevant requirements of FDA. High dirt retention capacity, a true graded capture of particles by density is achieved throughout the deeper layers of the cartridge, allowing the cartridge to be most fully effective; higher dirt retention capacity means a long service life and low replacement frequency as well as cost savings; low density at the surface of the cartridge and a gradual increase in density from the surface to the centre of the cartridge; no surface blind spots that would reduce the flow rate of the cartridge and increase the replacement frequency. Please check out detailed product model information in our web:https://www.xxfilter.com/water-filter-cart , ridges/meltblown- filter/index.html

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Erica Yu
13069352523
+86-373-3339377
Send Inquiry
Xinxiang Lifeierte Filter Corp., Ltd
Filter Industrial Park, High-tech Industrial Development Zone,Xinxiang City,Henan P.R.China
Xinxiang 453000
China
3/12/24 8:55 GMT
PP Folding Filter Element

Main characteristics of microporous membrane folded filter cartridge: high retention rate, high flow rate, low pressure difference and wide chemical compatibility; production process adopts unique hot melt welding processing technology, without any adhesive and no foreign substance release. Meet the production requirements of food, beverage, beer, chemical, pharmaceutical and other industries. Technical parameters: Specification: flat, needle punch Size: 508mm*60mmWorking pressure: 0.1-0.3Mpa Installation position: first stageWeight: about 200g Filtration precision: 1, 3, 5, 10, 20, 30, 50μm Please enter our web to learn more about the product models:https://www.xxfilter.com/water-filter-c , artridges/pleated-filter- element/index.html

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Erica Yu
13069352523
+86-373-3339377
Send Inquiry
Xinxiang Lifeierte Filter Corp., Ltd
Filter Industrial Park, High-tech Industrial Development Zone,Xinxiang City,Henan P.R.China
Xinxiang 453000
China
3/12/24 8:35 GMT
Partial discharge detector

PD1 is a hand-held, pre-screening, tool-based professional live detection instrument. It can be equipped with 8 external sensors including AA/AE Ultrasound, TEV ground wave, HFCT high frequency current and temperature sensor. It is suitable for live detection of various electrical equipment such as substation, switch station and outdoor. This instrument adopts acoustic and electric joint detection method, using transient ground wave (TEV), ultrasonic wave (AE), high-frequency current sensor (HFCT) and other sensors to comprehensively detect the partial discharge of power equipment, to achieve direct monitoring of power equipment such as transformers, switchgear and distribution cables. The PD1 detector can evaluate the insulation condition comprehensively according to a variety of characteristics, detect the magnitude of partial discharge, and calculate the time difference between acoustic and electrical signals to achieve accurate discharge power location. PD1 has waveform detection, recording and storage functions, and has small size, light weight, is very easy to operate. It supports wireless data uploading, cloud platform interconnection, GPS positioning, effectively preventing line faults and improving power cable reliability. Product Features: * Portable design, small size, light weight, easy to carry, single person can operate; *5 "high brightness large size touch LCD screen, grasp every detail, easy to operate; * The abnormal discharge signal detected by the detector is converted into audible signal and visual waveform, and the discharge intensity can be clearly distinguished according to the sound and waveform. * Embedded GPS receiver automatically stores coordinate data, which is convenient to query and save detection path; * With the function of temperature and humidity detection, real-time detection of ambient temperature and humidity; * With data saving function, data can be uploaded to the cloud platform to realize data analysis and review function; * High sensitivity, directivity and directionality, can accurately locate the line fault; * Non-contact detection, detection is effective, safe and reliable; * Live detection, does not affect the normal operation of the checked equipment; * The instrument can be extended to a variety of external sensors, flexibly used in various detection scenarios; * Waveform spectrum analysis: analyze the spectrum content of discharge waveform to make the discharge waveform more comparable, comprehensively statistical analysis of test data, reduce the influence of non-stability factors on test results. Application Scenarios: Any form of local discharge detection and positioning, arc, electrical trace and corona discharge detection; Electrical equipment transformer, switch cabinet, ring network cabinet, cable head, insulators, circuit breakers, busbar bushings, CT/PT, reactor, GIS/GCB, power cabinet, communication cabinet and other local discharge detection; SF6 leak detection; Pneumatic system leak detection; Mechanical failure detection, etc. Package Checklist: External TEV sensor Extended Ultrasonic sensor Long range Ultrasonic converters SD Memory Card (8GB) Stereo monitor headphones Temperature and Humidity sensor AC synchronizer Charger communication cable Carry case

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
livi xie
+8618998466200

Send Inquiry
Sonostar Technologies Co., Limited
C Building, #27 Yayingshi Road, Science Town, Guangzhou, China
Guangzhou 510665
China
3/12/24 8:34 GMT
Smallest Size Triaxial MEMS North Seeker

Introduction ER-MNS-06 MEMS North Seeker is the world's smallest triaxial MEMS north seeker, which is composed of a three-axis MEMS gyroscope and accelerometer, can measure the true north. It has the characteristics of small size, light weight, low power consumption, resistance to harsh mechanical environment, and is widely used in mining, tunnel construction and other fields. Technical Features Smallest size MEMS north seeker in the world Triaxial MEMS gyro and accelerometer Light weight, low power consumption Resistant to harsh mechanical environment Applications North seeking in logging tools/gyro tools Pointing, steering and guiding in advanced mining/drilling equipment Initial alignment in weapon/UAV launch systems Direction pointing and tracking in satellite antenna, target tracking system Guidance and navigation in navigation grade MEMS weapon system Orientating and positioning in railway train system Precision platform attitude measuring and controls Precision attitude, position measuring in navigation grade MEMS IMU/INS North finding and positioning in land surveying/land mobile mapping system Petroleum exploration Bridge, tall building, tower, dam monitoring Rock and soil monitoring Mining

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Roro Yang
13991957586
029-88767352
Send Inquiry
Shaanxi Ericco Inertial System Co., Ltd
Room 1,2100, Building 1, Ruixin Building, No.25 Gaoxin Road, Gaoxin District
Xi'an
China
3/12/24 8:33 GMT
ACOUSTIC IMAGING CAMERA

The Acoustic Imaging Camera combines acoustic images with video footage captured by a camera mounted on a microphone array, presenting a transparent overlay that allows for intuitive analysis of the tested object's condition. Utilizing acoustics, electronics, and information processing technology, this technique transforms sound into visible images, aiding users in comprehensively understanding sound fields, waves, and sources. It facilitates easy identification of the origins and causes of noises and vibrations in machinery, reflecting the operational stateof the device. With the aid of sound source imaging technology, it converts the received sound into a visual display, allowing you to quickly locate the source of the problem. Its high-frequency feature enables early detection, assisting in the prompt development of maintenance plans. This is why the YS-acoustic imaging camera has a frequency range of 2K-80KHz. Key Features * Available for use with one or both hands, featuring an integrated design that combines sound and imaging. * Compact, lightweight, and portable design enables quick and straightforward operation. * Capable of extended, continuous monitoring across a broad frequency range, covering both audible and ultrasonic sounds. * Delivers rapid and stable imaging, efficient performance, instant visualization, and quick identification of fault points. * Provides real-time, high-speed acoustic imaging and listening across the full frequency band with frequency filtering, including a storage mode for data recording. * Supports comprehensive channel data recording, image and video storage, and playback. * Offers time-frequency domain processing of acoustic signals.

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
livi xie
+8618998466200

Send Inquiry
Sonostar Technologies Co., Limited
C Building, #27 Yayingshi Road, Science Town, Guangzhou, China
Guangzhou 510665
China
3/12/24 8:32 GMT
Equivalent HYDAC filter element

Equivalent HYDAC filter element is an indispensable part of the pipeline series for conveying the medium. The filter element is usually installed in the inlet filter of the hydraulic system to filter out metal particles, polluting impurities, etc. in the fluid medium, which can protect the normal operation of the equipment. After entering the filter, the impurities are blocked, and the clean filtrate is discharged from the filter outlet. When cleaning is required, just take the filter element out of the filter, treat it with industrial liquid and put it in. HYDAC replaces the performance parameters of the filter element Reaching the level of similar foreign filter elements, it can completely replace the HYDAC filter element.

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Erica Yu
13069352523
+86-373-3339377
Send Inquiry
Xinxiang Lifeierte Filter Corp., Ltd
Filter Industrial Park, High-tech Industrial Development Zone,Xinxiang City,Henan P.R.China
Xinxiang 453000
China
3/12/24 8:30 GMT
Alternative Hy-pro filter element

Alternative Hy-pro filter element is made of high-quality glass fiber material, which is widely used in hydraulic system to filter out solid particles and colloidal substances in the medium, reduce the relative surface friction of hydraulic components, improve the reliability of the system, and ensure the safety of hydraulic system and lubrication system. Safe and efficient operation. Technical parameter: Filter material: glass fiber , wire mesh Micron:1-100μm O-ring: silicone,NBR,Viton Working temperature:-30℃~+100℃ Operating pressure:21bar-210bar Filtration medium:hydraulic oil,lubricating oil,phosphate hydraulic oil,emulsion,water glycol,ect Application:metallurgy&steel,Cement, , Mining,thermal power and nuclear power,electronics industry,petrochemical,etc

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Erica Yu
13069352523
+86-373-3339377
Send Inquiry
Xinxiang Lifeierte Filter Corp., Ltd
Filter Industrial Park, High-tech Industrial Development Zone,Xinxiang City,Henan P.R.China
Xinxiang 453000
China
3/12/24 8:29 GMT
Replacement 3M high flow cartridges

Replacement 3M high flow cartridges are made of deep fine polypropylene or glass fiber membrane as filter media, with a large diameter of 6.5 inches / 165mm, no center rod, unidirectional opening, and specially designed to flow the liquid from the outside to the inside, ensuring that all contaminant particles are trapped outside the cartridge. The ultra-high flow rate design allows for a significant reduction in the use of cartridges and filters for the same flow rate application, resulting in significant savings in equipment investment costs and labor costs. Looking for detailed product model,please check out in our web:https://www.xxfilter.com/high-flow-filter- , cartridge/3m/index.html

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Erica Yu
13069352523
+86-373-3339377
Send Inquiry
Xinxiang Lifeierte Filter Corp., Ltd
Filter Industrial Park, High-tech Industrial Development Zone,Xinxiang City,Henan P.R.China
Xinxiang 453000
China
3/12/24 7:26 GMT
For people, reading is like the quality awareness of hydraulic cartridge va

Material poverty can destroy your dignity throughout your life. The lack of orders can disrupt the cost plan of a hydraulic cartridge valve manufacturer. Spiritual poverty consumes your reincarnation for several lifetimes. The poverty of quality can tear apart all of a hydraulic cartridge valve manufacturer. Books are cheap, but that doesn't mean knowledge is cheap. Although reading may not necessarily lead to a bright future, it can make you speak with emotional intelligence and act with intelligence. Hydraulic cartridge valve manufacturers who control quality well may not necessarily make your orders soar, but they can reassure customers and also reassure themselves. Reading is the lowest threshold of nobility. Quality is the minimum threshold for a hydraulic cartridge valve manufacturer. The future of the hydraulic cartridge valve manufacturer may seem certain, but in reality, there is too much uncertainty. Life is like this, and manufacturing is also like this. Only by walking on thin ice and constantly maintaining respect for quality can we have a definite tomorrow. Hydraulic cartridge valve manufacturer AAK maintains a good upbringing, no matter where they are or who they are facing. This can distinguish AAK from other hydraulic cartridge valve manufacturers in China. Some people are already in their teens and have already become lethargic, while others are over sixty years old but still have a youthful aura, always retaining the passion and passion of youth, freely galloping in their own spiritual world. There is light in the eyes because there is still the initial kindness and integrity in the heart, which is enough to light up one's entire life. Hydraulic cartridge valve manufacturer AAK in China, on the road, has a shining eye and insists on quality. AAK HYDRAULIC CARTRIDGE VALVES (785) 2024-03-10

Minimum Order: 5 dozens

Contact:
Phone:
Fax:
Email:
VINSON ZHANG
057483008115
057488138441
Send Inquiry
AAK INDUSTRY CO., LTD
Bona Business Building, No. 456 Taikang Middle Road
Ningbo 315100
China
3/11/24 9:44 GMT
A few insights from AAK, about the snowflakes

This year's Spring Festival holiday, hydraulic cartridge valve manufacturer AAK has two team leaders who returned late due to family matters. Although it may have some impact on the subsequent production of hydraulic cartridge valve manufacturers, I can understand that they are 1,500 kilometers away from home. The workshop director is also very concerned about the production progress and has been feeling a bit emotional these days. Our new salesperson was frustrated at both ends and was scolded by the workshop director. He was also complained about by customers due to delivery time, and the new salesperson often complained in the workshop. Whether the managers of hydraulic cartridge valve manufacturers or the salesperson of hydraulic cartridge valve manufacturers, be an emotionless person and don't complain everywhere. Especially for those engaged in business, one should not be complacent, let alone have high expectations for any customer. Some things, you tell the wind, and the wind will also notify the entire forest. Many people are very concerned about face. If hydraulic cartridge valve manufacturers encounter problems, they should put down their face and actively seek help from others, and never work behind closed doors. At the same time, improve your shielding ability and don't get angry casually. Not only will it not solve the problem, but it will also harm yourself. It's your fault to take another look at anyone or anything that consumes energy. If the customer has misunderstandings about the manufacturers of hydraulic cartridge valves, firstly, restrain your desire to refute and learn to accept and praise. The quickest way to succeed is to replicate the achievements of others. Most big shots are like this, starting with learning from others and even plagiarizing them. Hydraulic cartridge valve manufacturer AAK, in the early days, followed SUN and HydraForce. But hydraulic cartridge valve manufacturer AAK has always understood over the years that AAK cannot become someone else, but to constantly surpass ourselves. Hydraulic cartridge valve manufacturers should often interact with customers who value quality, as they bring a positive magnetic field. The type of customer business that hydraulic cartridge valve manufacturers do determines their future height. The fastest way for a person to grow is to walk with excellent people. Meet people with high cognitive dimensions, they won't give you wealth. But everyone has a desire to share, and they will share their high-dimensional knowledge with you, which is the most valuable wealth. A person's maturity is not about understanding things, but understanding human nature. When talent cannot support your ambition, you should step out and study hard. I really like a saying, the farther you go, the more you see. In this lifetime, there are only a few people who you truly care about and they care about you at the same time. If hydraulic cartridge valve manufacturers can meet a few sincere customers, that's enough. This vast planet, with a sea of people in life, we can meet and talk to customers who share the same values, which can be seen as a community of shared destiny. You really need to cherish it. As long as you dare to think, dare to do, and be able to integrate knowledge and action, it will definitely make your life better and better. The road is walked out, not imagined. Thinking is always a problem, doing is the answer. Hydraulic cartridge valve manufacturer AAK has been on the road. AAK HYDRAULIC CARTRIDGE VALVES (784) 2024-03-09

Minimum Order: 5 dozens

Contact:
Phone:
Fax:
Email:
VINSON ZHANG
057483008115
057488138441
Send Inquiry
AAK INDUSTRY CO., LTD
Bona Business Building, No. 456 Taikang Middle Road
Ningbo 315100
China
3/11/24 9:02 GMT
GHS-01 Heat Seal Tester

Application A Heat Seal Tester is a device used in the packaging industry to evaluate the heat-sealing properties of various materials, such as films, laminates, and other packaging components. The heat seal strength and integrity of these materials are crucial to ensure the quality and effectiveness of packaging for products like food, pharmaceuticals, electronics, and more. The tester works by applying a certain heat and pressure to a sample of the material being tested for a certain time interval, simulating the conditions under which heat seals are formed in the packaging process. The heat, pressure, and time settings can be adjusted to mimic different sealing conditions, which allows manufacturers to determine the optimal parameters for achieving strong and consistent seals. The term "gradient" in Gradient Heat Seal Tester refers to the ability of the device to create a controlled temperature gradient across the sealing area. A Gradient Heat Seal Tester can also be understood as a Multi-Station Heat Seal Tester, which means tests can be run at different temperature settings simultaneously. This reduces the waiting time between tests and increases the overall efficiency of the testing process. Standards ASTM F2029-16(2021) :Standard Practices for Making Laboratory Heat Seals for Determination of Heat Sealability of Flexible Barrier Materials as Measured by Seal Strength Technical Features The key to a heat seal tester is its stability and accuracy in time, temperature, and pressure. GHS-01 Gradient Heat Seal Tester ensures good sealing results with our state-of-art design, and it can realize five groups of sealing temperatures simultaneously. 1. Both the upper and lower jaws are made of aluminum and independently heated so that heat loss is maximumly eliminated in sealing and temperature smoothness is ensured. 2. First class P.I.D. (proportional integral derivative) temperature controller realizes precise temperature control and efficient heating. 3. Combination of accurate timer and proximity sensor realizes simultaneous seal start time with jaw movement. 4. Unform sealing pressure by the three-way guided sealing bar. 5. User protection designs, such as anti-scald front cover, manual and foot switch, etc. 6. Seal jaw customization available in terms of dimension, shape, and sealing surface/patterns. 7. More gradient temperatures of upper and lower heating can be customized. Main Parameters Sealing Temp.: Ambient~250℃ Temp. Gradient: ≤20℃ Deviation: ±0.2℃ Sealing Time: 0.1S~9999H Sealing Pressure: 0.15~0.7 MPa Seal Jaws(mm): U: 40*10 (5PCS) L: 330 (1PCS) Gas Input: 0.7 MPa with Ф6 mm Pipe Power: AC 220V 50Hz

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Yvette Yang
8613165113870

Send Inquiry
Cell Instruments
NO. 5577, Gongyebei Rd, Jinan, 250109, China​
Jinan
China
3/11/24 9:02 GMT
GFT-02 Flex Durability Tester

Background 1. One key property of flexible barrier material is the resistance against repetitive strain, which is called flex durability, or Gelboflex. Good flex crack resistance will reduce the propensity of the package developing holes during the distribution cycle thereby destroying the package integrity. 2. A critical property of flexible barrier materials is their ability to withstand repetitive strain, known as flex durability or Gelboflex resistance. Strong flex crack resistance is essential as it lowers the risk of package perforation during distribution, safeguarding package integrity. Application 1. The flex durability tester is used to measure the resistance against repetitive strain for films, composites, and coating films, etc. Flex failure is determined by measuring the pinholes formed in the sample structure. It is also called Gelboflex. Good flex crack resistance will reduce the propensity of the package developing holes during the distribution cycle thereby destroying the package integrity. 2. The flex durability tester, also known as Gelboflex, assesses the ability of materials like films, composites, and coating films to withstand repetitive strain. It quantifies flex failure by detecting pinholes that may develop in the sample structure. Excellent flex crack resistance is vital as it minimizes the risk of packaging developing holes during distribution, ensuring the package remains intact throughout its journey. This is crucial for preserving the integrity of the contents within. 3. The flex durability tester, often referred to as Gelboflex, is employed to assess the ability of materials such as films, composites, and coating films to withstand repeated strain. It gauges flex failure by detecting the formation of pinholes within the sample's structure. Strong flex crack resistance plays a crucial role in preventing the development of holes in packaging during distribution, preserving the package's integrity throughout its journey. Standard ASTM F392, "Flex durability of flexible barrier materials". Sampling and motion 1. The sample size (200 by 280 mm) is attached to the flex tester mandrels. The flexing action consists of a twisting motion combined with a horizontal motion (compression), thus repeatedly twisting, and crushing the film. The test set up gives a twisting motion of 440º in the first 90 mm of the stroke and is followed by a straight horizontal motion of 65 mm. The speed is 45 cycles per minute. There are 5 pre-programed test conditions to choose from: Mode A– Full flex for 1 hour (2,700 cycles), Mode B– Full flex for 20 minutes (900 cycles), Mode C– Full flex for 6 minutes (270 cycles), Mode D– Full flex for 20 cycles, Mode E– Partial flex for 20 cycles. 2. In the flex tester, a sample measuring 200 by 280 mm is affixed to the mandrels. The flexing process involves a combination of twisting and horizontal compression, repeatedly subjecting the film to both actions. Specifically, the setup initiates a twisting motion spanning 440 degrees within the first 90 mm of the stroke, followed by a linear horizontal motion of 65 mm. The entire cycle occurs at a speed of 45 cycles per minute. Users have the option to select from five pre-programmed test conditions. Mode A– Full flex for 1 hour (2,700 cycles), Mode B– Full flex for 20 minutes (900 cycles), Mode C– Full flex for 6 minutes (270 cycles), Mode D– Full flex for 20 cycles, Mode E– Partial flex for 20 cycles. 3. The test procedure involves attaching a sample measuring 200 by 280 mm to the flex tester's mandrels. This flexing action combines twisting and horizontal compression, repetitively twisting and crushing the film. The setup initiates a 440-degree twisting motion within the first 90 mm of the stroke, followed by a straight horizontal motion of 65 mm. The entire cycle operates at a speed of 45 cycles per minute. Users can select from five pre-programmed test conditions. Technical Features The system features PLC control with an intuitive HMI touch screen interface. It offers five standard test modes and includes four test stations. Users can quickly switch between long and short stroke modes. Test conditions A, B, C, D, and E are selectable. Main Parameters Flex Frequency 45 /minute Flex Angle 440° (90 mm) or 400° (80 mm) Capacity 3.5 N.m Horizontal Stroke 155 mm or 80 mm Stations 3 Sample Size 280 mm x 200 mm Power 110~220V

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Yvette Yang
8613165113870

Send Inquiry
Cell Instruments
NO. 5577, Gongyebei Rd, Jinan, 250109, China​
Jinan
China


SOURCE: Import-Export Bulletin Board (https://www.imexbb.com/)
Result Page:   << Previous   |   11  |   12  |   13  |   14  |   15  |   16  |   17  |   18  |   19  |   20  |   21  |   Next >>

Post an Offer to Sell
Home - Offers to Buy - Business Opportunities - Company Profiles

© 1996-2024 IMEXBB.com. All rights reserved.

IMEXBB.com