Industrial Machinery & Equipment

A&S Construction Machinery Co., Ltd. supplies all types of Engines. All the brands of Engines we can provide: CAT Engines, KOMATSU Engines, JOHN DEERE Engines, SANY Engines, XCMG Engines, VOLVO Engines, HITACHI Engines, SUMITOMO Engines, LIEBHERR Engines, DOOSAN Engines, CASE Engines, BOBCAT Engines, KUBOTA Engines, YANMAR Engines, HYUNDAI Engines, DAEWOO Engines, etc. For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, reducers, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, controllers, distributors, fuses and relays, harnesses, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc. Contact Us A&S Construction Machinery Co., Ltd. Email: parts@esmachinery.com Website: https://ascmparts.com/ Tel: +(86) 28 8509 8851 Address: 469 Xinsheng Road, Wuhou District, Chengdu, Sichuan, China 610041

Minimum Order: 1 bags

Last week, Akjoor from Türkiye left a message on the website of the hydraulic cartridge valve manufacturer AAK: I need the lead time of producing a standard hydraulic cartridge flow control valve, but the precision of the valve cage must be controlled within 2μm. After communication, we learned that Akjoor purchased 360 pcs of hydraulic cartridge flow control valves from another hydraulic cartridge valve manufacturer. Except for the unstable valve cage accuracy, all other functions meet the requirements of their engineers. This hydraulic cartridge flow control valve is actually not difficult, with a valve cage accuracy of within 2μm is an additional requirement of Akjoor. Most hydraulic cartridge valve manufacturers are only able to copy standard parts. If there are additional requirements, stability can be a problem. I sent Akjoor a video of hydraulic cartridge valve manufacturer AAK produced hydraulic cartridge flow control valve cages last time, showing how AAK controlled the accuracy of the valve cages in 3 steps. The machining of AAK hydraulic threaded cartridge valve cage is carried out using Jidou fully automatic lathe, which is suitable for machining parts with precision requirements. After one clamping, the machining of the valve cage is completed in one go. 1. After the valve cage clamp is completed, check the positioning to ensure that the clamp is fixed without deviation, then close the safety door and start processing. 2. After the valve cage is processed, the technician takes out the valve cage and uses an air gun to remove debris from the valve cage and fixture. 3. Use a plug gauge to check the machining size of the valve cage. Today, we received the test order from Akjoor, but need to start production after CNY, because our workshop has already been closed due to CNY holiday. AAK hydraulic cartridge flow control valve, 3 details, no problem to meet 2μm accuracy. AAK HYDRAULIC CARTRIDGE VALVES (775) 2024-02-05

Minimum Order: 1 bags

The French Fries Processing Line includes potatoes washing, peeling, cutting, blanching, aotomatic weighing and packaging. Our team has more than 10 years of design experience, solving the problems of starch residue after cutting, extending the shelf life of French fries, and ensuring fresh of French fries. food processing solutions from Fuma Food Machinery

1. Designed for the purification of laboratory hydrochloric acid, nitric acid, and hydrofluoric acid to reduce the content of metal impurities in the acid. 2. Generally, for an acid with a metal impurity content of 10 ppb, after one purification, the metal impurity content can be reduced to about 0.01 ppb. 3. Meet the extremely low detection limit requirements of ICP-MS and provide laboratory-grade ultrapure acid for demanding analytical applications. Mobile: +86-153 6614 0844 Wechat/Whatsapp: +86-153 6614 0844 Mail: ClairBZH@gmail.com

Teflon multi-neck flask, condenser tube，connected by PFA tube. Can be used for distillation and purification of fluoride. Supports custom fittings and valves. Mobile: +86-153 6614 0844 Wechat/Whatsapp: +86-153 6614 0844 Mail: ClairBZH@gmail.com

Threema:8FDX5N99 Whatsapp：+852 60643743 Email:13619649643@163.com Synon , yms eb 2-oxo PCE, Eticyclidone, O-PCE Technical Information: Formal Name 2-(ethylamino)-2-phenyl-cyclohexanone, monohydrochloride CAS Number: 4551-92-2 Molecular Formula: C14H19NO • HCl Formula Weight: 253.8 Purity: ≥98%

Minimum Order: 100

Cleanroom online particle counter OPC-6303M adopts Laser scattering technology, with a pump-suction sampling method and can accurately detect and calculate the number of suspended particles with different particle sizes in the air. The sensor can real time simultaneously output the quantity of particles in 6 channels including 0.3μm, 0.5μm, 1.0μm, 2.5μm, 5.0μm and 10μm (PCS/m³, PCS/L or PCS/28.3L). It is a high performance-to-price ratio GMP airborne particle counter for clean room application. Features - 4 in 1 integrated particle counter of particulate matter sensor, filter, flow sensor and pump - Output particle number (PCS/m³, PCS/L or PCS/28.3L) in 6 channels including 0.3μm, 0.5μm, 1.0μm, 2.5μm, 5.0μm, 10μm - Built-in high power industrial grade linear laser, accurate identification - Built-in pump and flow sensor for constant stable sampling - Wide working temperature -30℃~70℃, stable for different clean room application - With voltage regulator design and EMC compliant, strong anti-static ability - Modbus RS485,MQTT, 4-20mA output for online remote monitoring Specifications Operating principle:Laser scattering Output channel:>0.3μm, >0.5μm, >1.0μm, >2.5μm, >5.0μm, >10μm Measurement error:<100pcs/L: ±30pcs/L;>100pcs/L: ±30% of reading Condition: 0C ~ 40C,50+10%RH (0°C ~ 40°C, 50 ±10%RH. Reference instrument:TSI 9306. TSI 9306 count efficiency 50% @ 0.3 µm and 100% for particles >0.45 µm) Time to first reading:≤ 8s Data refresh time:1s Working condition:-30°C ~ 70°C, 0 ~ 95%RH (Non-condensing) Storage condition:-40°C ~ 85°C, 0 ~ 95%RH (Non-condensing) Power supply:DC 12V, ripple wave < 50mV Working current:≤1A Communication interface:RS485(Standard), RJ45(standard), 4-20mA(standard) Life span:≥3 years Sampling flow rate:2.83L/min (0.1CFM) Work mode:Adjustable(default: work 1 minutes and sleep 4 minutes) Standard:Comply with JJF 1190-2008

Minimum Order: 1 bags

OPC-6510DS is a cleanroom airborne particle counter, it can accurately detect and calculate the number of different size particles in the air per unit volume. The device can simultaneously output the particle number of 5 channels of >0.3μm, >0.5μm, >1.0μm, >5.0μm, >10μm in pcs/28.3L or pcs/m³. The screen can realtime display the monitoring data, cleanroom ISO14644-1 2015 grade and alarm once the particle quantity exceeds the set threshold. The touch screen also supports setting the output unit, display channel, concentration alarm threshold, coefficient, language, work time, MQTT, etc. Features - Real-time output particle quantities of 0.3μm, 0.5μm, 1.0μm, 5.0μm, 10μm in pcs/28.3L or pcs/m³. - Sound and light alarm once particle quantity exceeds the set threshold. - ModBus and MQTT communication protocols available. - Calibration coefficient correction available against standard equipment. - Real-time display cleanroom ISO 14644-1 grade level. - Output units switchable between pcs/28.3L and pcs/m³. - Constant flow gas sampling system to ensure stable sampling. - Industrial grade laser for high reliability. Specifications Operating principle: Laser scattering Measurement range: 0~1,000,000 pcs/ 28.3L Output channels: >0.3μm, >0.5μm, >1.0μm, >5.0μm, >10μm Count efficiency: 50%@≥0.3μm, 100%@≥0.5μm;Condition: 25±2℃, 50±10%RH, calibration instrument Lighthouse 3100 Time to first reading: ≤ 8 seconds Data refresh time: 1 second Working condition: 0°C ~ 45°C, 0 ~ 95%RH (Non-condensing) Storage condition: -20°C ~ 60°C, 0 ~ 95%RH (Non-condensing) Operating voltage: DC 24V±15% Average operating current: ≤3A Communication interface: RS485(Standard), RJ45(Standard) Life span: ≥3 years Sampling flow rate: 28.3L/min (1CFM) External sampling tube: Inner diameter: ф10mm Length: ≤3m Work mode: Adjustable(default: work 2 minutes and sleep 28 minutes) Display: 3.5-inch color touch screen

Minimum Order: 1 bags

The cleanroom remote online particle counter OPC-6510 adopts the principle of optical scattering, which can accurately detect and calculate the number of suspended particles of different particle sizes in the air per unit volume. The gas sampling rate of large flow can simultaneously output the particle number of 5 channels of >0.3μm, >0.5μm, >1.0μm, >5.0μm, >10μm (pcs/28.3L or pcs/m³). Features - Output particle number (pcs/28.3L or pcs/m³) in 5 channels including >0.3μm, >0.5μm, >1.0μm, >5.0μm, >10μm - Built-in high power industrial grade linear laser, accurate identification - Built-in fan and flow sensor for constant stable sampling - Modbus RS485 and MQTT output for online remote monitoring Specifications Output channels:>0.3μm, >0.5μm, >1.0μm, >5.0μm, >10μm Operating principle:Laser scattering Measurement Range:0~1,000,000 pcs/ 28.3L Count efficiency:50%@≥0.3μm, 100%@≥0.5μm;Condition: 25±2℃, 50±10%RH, calibration instrument Lighthouse 3100 Time to first reading:≤ 8 seconds Data refresh time:1 second Working condition:0°C ~ 45°C, 0 ~ 95%RH (Non-condensing) Storage condition:-20°C ~ 60°C, 0 ~ 95%RH (Non-condensing) Operating Voltage:DC 24V±15% Average operating current:≤3A Communication interface:RS485(Standard), RJ45(Optional) Life span:≥3 years Sampling flow rate:28.3L/min (1CFM) External sampling tube Inner diameter: ф10mm Length: ≤3m Work mode:Adjustable(default: work 2 minutes and sleep 28 minutes)

Minimum Order: 1 bags

Yaskawa SGMG-1ABWAF-HG1 AC Servo Motor 11kw 200V 1500rpm 70nm With ENCODER UTMAE-B12DA4 With CYCLO DRIVE 6000 CWVJ-6170-5Z-11 NEW IN ORIGINAL CRATE WITH PAPERWORK QTY 2 650Lbs. ea. Only $8,995 per.

Minimum Order: 1 bags

This week, we’d like to introduce a hydraulic flow divider/combiner valve equivalent to HydraForce FD50-45. This valve is a screw-in cartridge, spool type flow divider/combiner valve. It provides pressure compensated proportional division of inlet flow or combining of two return flows regardless of system operating pressure conditions. The valve provides synchronizing flow in dividing and combining modes. The valve is intended for use in mineral based or synthetic hydraulic fluids with lubricating properties. Last December, we received an inquiry from a new customer in the United States for HydraForce FD50-45 Hydraulic Divider/Combiner valve. This cartridge valve is not very commonly used, and there are only a few hydraulic cartridge valve manufacturers in Ningbo China that have this model in stock. Per customer, they have followed up hydraulic cartridge valve manufacturer AAK for a long time, and would like to place a trial order for 10 pcs for HydraForce FD50-45 first. If the valves passed testing, they will place the annual order for 1,000 pcs. We are confident to become the preferred hydraulic cartridge valve supplier for this customer in the United States, because AAK quality has been approved for many American customers. AAK hydraulic Flow divider/combiner valve: 1. The function and performance is equivalent to that of HydraForce FD50-45 2. Its service life is longer than of its domestic peers Technical parameters of AAK E-FD50-45 hydraulic Flow divider/combiner valve: Max. Operating Pressure: 345 bar (5000 psi) Flow: 4 - 12 gpm (15.1 - 45.4 lpm) Flow Accuracy: 10% (25 ~ 100% of Max.inlet flow) Cavity: 10-4 Filtration: 25μm or better Temperature Range: -40°C ~ +120 °C (with Buna N seals) Fluids: Mineral based or synthetic hydraulic fluid with lubricating properties Fluid viscosity range: 7.4 to 420 cSt (50 to 2000 ssu) AAK E-FD50-45 hydraulic Flow divider/combiner valve, benchmarking HydraForce FD50-45, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC CARTRIDGE VALVES (790) 2024-04-01

Minimum Order: 5 dozens

Graphite hotblock digestion system with Teflon anti-corrosion coating Batch heating and digestion can be performed on different samples at the same time; the fully enclosed design effectively prevents the entry of acid mist; the surface is covered with Teflon coating to prevent direct metal leakage. #Hotplate #digestionsystem #hotblock #samplepreparation #Heavymetaldetection Mobile: +86-153 6614 0844 Wechat/Whatsapp: +86-153 6614 0844 Mail: ClairBZH@gmail.com

Customized Teflon gas cleaning hydrogen fluoride reaction unit with PFA valve The PFA thread-sealed double-neck reaction impact bottle is connected through a PFA pipe and a valve to form a fluorine gas absorption device. It is resistant to aqua regia, hydrofluoric acid, hydrochloric acid and other organic solutions, and supports the combination customization of various devices. #teflon #reactiondevice #geochemistry #Hydrogenfluoridedevice #icpms #Gascleaning #labware

We make open mixing mill with roller diameter from 6 inch to 24 inch.

Minimum Order: 1 bags