Industrial Machinery & Equipment

The system automatically completes heating, peeling, temperature control, distillation apparatus compressor refrigeration, cooling water circulation and distillation end point determination. Optima-6 Distiller Features •Unattended: The Distiller system automatically completes heating, peeling, temperature control, distillation apparatus compressor refrigeration, cooling water circulation and distillation end point determination. •Heating module: Using advanced far-infrared ceramic radiation heating technology, no open flame, low power consumption, high efficiency, long life, uniform heating, not easy to explode, and good corrosion resistance. The heating components can be controlled individually without interfering with each other. Single channel control and all six channels can be controlled. Single channel power 500W, total power 3000W. •Cold water circulation module: It can have built-in/ external compression refrigeration components, and the cooling water source is in a closed loop without external tap water. It can meet the condensation work under various working conditions. It is simple to operate, flexible to use, and has good refrigeration effect. •One-click self-cleaning: The distillation instrument has a built-in automatic cleaning pump. There is no need to disassemble the bottle. After the experiment, the distillation pipeline can be cleaned directly with one click, which is convenient, fast, safe and efficient. •Distillate liquid anti-suckback: When the distillate reaches the end point, the distillate outlet is automatically locked, and the built-in suckback valve automatically opens, ensuring accurate weighing and anti-suckback prevention. •Distillation Dual Mode: A.Weighing distillation: Use a high-precision weighing end-point detection module with a measurement accuracy of 0.1g, and the distillation will automatically stop at the end of the distillation. B.Timing distillation: distillation according to the set time, and it will be automatically stopped when the time is reached. Two modes can be selected arbitrarily, and the distillation mode of each unit can be set independently. •Precision distillation: When distillation reaches the set amount, the liquid outlet is automatically locked. Prevent excessive distillation due to residual heating and ensure accurate distillation without excessive distillation. •External LCD touch screen: The display screen is placed externally on the instrument. It is easy to take and can effectively prevent corrosion of the display screen by spilled liquid.

OIC-M1 modular high-end ion chromatography system is engineered for precision, flexibility, and automation. Designed for laboratories that demand high-quality ion analysis without the footprint of bulky systems, the OIC-M1 delivers ppb- level detection limits (LOD ~0.5 μg/L), RSD ≤ 1.3%, and robust baseline performance. Key Features and Advantages of Modular High-End Ion Chromatography 1. Detection System: Equipped with a new dual-mode suppressor and non- suppressor conductivity detector. Compatible with suppressed conductivity detection and ultraviolet detection, offering flexible analysis options. 2. Automated Control: Software supports one-click power-on, flushing, and shutdown. Flow path settings and detector signal range are automatically adjusted based on methods. Remote control via software enables automatic startup and shutoff according to schedule—ideal for unattended 24-hour operations. 3. Flow Path Materials: Full PEEK pipeline system, compatible with eluents in the pH range of 0 to 14. Acid-resistant and alkali-resistant; ensures chemical compatibility and corrosion resistance with 100% biocompatible materials. 4. Integrated Eluent Heating: Built-in eluent heating module stabilizes eluent temperature before entering the column, improving peak shape and reducing baseline noise caused by temperature fluctuations. 5. Degassing Module: Built-in solvent degasser removes gas interference in real time, improving eluent stability and maintaining detector sensitivity. 6. Precision Control System: High-precision pressure and flow control system ensures stability across the entire flow path, suppressor, and detector. Enhances reliability of retention time and peak area. 7. Reagent-Free Design: Eluent preheating and flushing are fully automated. No need for manual operation of the suppressor or column conditioning. Compact footprint and easy maintenance support simplified daily operation. 8. Dual-Channel Upgrade Capability: Supports upgrade to dual-channel system. Allows simultaneous detection of different ion types from a single sample injection.

The OIC-610 Basic Ion Chromatograph features advanced separation technology and a high-sensitivity detection system, ensuring precise and reliable analytical results for routine laboratory testing. OIC 610 Basic Ion Chromatography Instrument Features One-click automatic operation, durable and stable performance Built-in column temperature compartment, eliminate interference, more stable for temperature control. Full PEEK high-pressure resistant double-piston constant flow pump, with a maximum pressure resistance of 35MPa, stable and accurate flow. The detection system is independent and closed, with internal temperature control range, resistant to external interference, faster and more stable balance. The self-regenerating electrical suppression membrane continuously regenerates the suppressor, self-protection function, and can be applied to gradient elution. The flow path is made of PEEK material, resistant to acid, alkali and organic solvents, and is stable and pollution-free.

Locomotora minera de 8 toneladas alimentada por batería La locomotora eléctrica a batería es un tipo de equipo de tracción de vías alimentado por baterías, que generalmente se utiliza en minas. Hay dos tipos de locomotoras eléctricas a batería, el tipo a prueba de explosiones y el tipo ordinario. El tipo a prueba de explosiones se utiliza principalmente en minas de carbón. También hay muchas opciones en términos de regulación de velocidad y métodos de frenado. Los métodos de control de velocidad incluyen control de velocidad de resistencia, control de velocidad de corte y control de velocidad de conversión de frecuencia. Los métodos de frenado incluyen frenado mecánico puro, frenado hidráulico y frenado de aire comprimido. Además, el frenado eléctrico también se puede seleccionar como método de frenado auxiliar. Peso adhesivo / total (t): 8 toneladas Ancho de vía (mm): 500.600.762.900 Tracción (KN): 11,18 o 12,83 Máx. Tracción (KN): 19,62 Velocidad (km/h): 6,2~7,8 Voltaje de la batería (V): 110~140 V Capacidad de la batería (Ah): 440 Potencia (KW): 11 o 15 KWx2 Dimensiones Longitud (mm): 4420 Ancho (mm): 920, 1082 o 1220 Altura (mm): 1600 Distancia entre ejes (mm): 1100 Diámetro de la rueda (mm): 680 Radio de curva mínimo (m): 7 Controlador: Resistencia o IGBT Método de frenado: Freno mecánico o neumático Ventajas de nuestro producto 1. El uso de placas de acero de alta calidad y un proceso especial de eliminación de óxido garantizan una mayor resistencia a la corrosión y son adecuados para entornos mineros hostiles. 2. La producción de motores por nuestra cuenta, utilizando material de aislamiento de alta palanca y cobre puro, garantiza una potente fuerza de tracción y es adecuado para entornos mineros hostiles. 3. La superficie de anastomosis de los engranajes alcanza más del 80 %, lo que supera con creces el estándar. 4. El marco diseñado y ajustado profesionalmente garantiza una conducción segura y evita caídas de los rieles. 5. Se puede elegir una variedad de métodos de frenado, freno de aire, freno hidráulico, freno eléctrico, freno mecánico para garantizar la conducción segura. 6. 40 años de rica experiencia con la capacidad de diseñar y fabricar productos personalizados de acuerdo con sus requisitos. 7. Prueba de fábrica en línea: visita Prueba de locomotora minera 1. Antes de poner en marcha la locomotora, realice la depuración de los engranajes, la iluminación, los engranajes y el ajuste de los frenos, etc. para garantizar el funcionamiento normal de la locomotora. 2. Realice una prueba de tracción antes de salir de la fábrica para garantizar que el rendimiento de carga de la locomotora cumpla con el estándar. Nuestros estándares de diseño generalmente superan el estándar nacional en un 10%-20%. 3. Realice diferentes tipos de pruebas de funcionamiento antes de salir de la fábrica para garantizar el rendimiento y el funcionamiento normal de toda la locomotora. Puede adaptarse a diversas condiciones duras en condiciones de trabajo simuladas. Prueba del motor El motor tiene que pasar por muchos procedimientos de inspección antes de salir de la fábrica, y cada motor tiene que realizarse con experimentos de funcionamiento con carga. Los motores a prueba de explosiones se realizan con prueba de presión de agua. Todas las pruebas del motor son para garantizar que pueda adaptarse a condiciones de trabajo duras. Casos 1. Un buen comentario de un cliente de América Latina sobre nuestra locomotora de batería de litio 2. Para resolver los problemas existentes de las baterías de plomo-ácido, más de 30 locomotoras eléctricas de batería de plomo-ácido en esta gran minería se cambiaron a locomotoras eléctricas de batería de litio, lo que mejoró el entusiasmo laboral y la eficiencia de producción de los empleados, redujo los costos y es más amigable con el medio ambiente. 3. El carro perforador de roca para minería diseñado por Sunward Co. tiene un tamaño pequeño y una estructura simple, por lo que el espacio para colocar la batería de litio en la carrocería es muy limitado. De acuerdo con el tamaño limitado, nuestra empresa diseñó un plan de energía de suministro de energía de litio, que resuelve perfectamente el problema del espacio de suministro de energía de litio. Para adaptarse al entorno industrial y minero especial y mejorar la eficiencia del transporte, se diseñó un lote de locomotoras eléctricas de batería de litio de 2,5 toneladas para los clientes de Myanmar. Preguntas frecuentes ¿Cuáles son las ventajas de su producto? Contamos con más de 40 años de experiencia en este campo, por lo que podemos diseñar o producir la locomotora según sus necesidades. También podemos ofrecerle un servicio en línea para enseñarle cómo operar y mantener la locomotora. Lo más importante es que producimos la parte principal de la locomotora: los motores de tracción. Podemos garantizar la potencia de la locomotora. 1. Servicio de preventa: La amplia gama de productos nos permite proporcionar a nuestros clientes máquinas individuales o plantas de procesamiento completas. Según los pedidos y el presupuesto de nuestros clientes, nuestros expertos crean soluciones eficientes y confiables, y producimos siguiendo estrictamente los pedidos de los clientes. Además, cada cliente tiene la oportunidad de visitar la máquina en funcionamiento en el sitio antes de realizar el pedido. 2. Servicio posventa: La orientación de técnicos experimentados está disponible por teléfono y en Internet. Se enviarán uno o más ingenieros a la cantera para ayudar a instalar las plantas del cliente. También se brinda la capacitación necesaria sobre el mantenimiento diario de la máquina a los trabajadores locales. 3. Métodos de pago: T/T (transferencia telegráfica) o Western Union o L/C a la vista Tiempo de procesamiento de un pedido: En un plazo de 10 días desde el stock 4. Método de envío: Pedido de muestra: sugerimos mensajería urgente como DHL/UPS/TNT/FEDEX o por aire Pedido al por mayor: sugerimos por aire o por mar. 5. Control de calidad: Contamos con nuestro propio control de calidad experimentado. Se realizarán inspecciones y pruebas estrictas para cada pedido antes del envío. 6. Servicios posventa: a. Nuestro equipo de ventas responderá a su pregunta dentro de las 24 horas (no se incluyen los días festivos) b. El soporte técnico estará disponible en cualquier momento c. Se proporcionará un reemplazo gratuito una vez que se confirme la falla causada por la calidad de nuestro producto

Minimum Order: 1 bags

Z28-200 rod threading machine for machine, thread rolling machine 1. Mainly used for all kinds of external thread, including the common thread, trapezoidal thread and modulus thread. 2. It can do the rolling process, forming, slidabrading, knurling etc.. 3. Apply for all kinds of carbon steel, alloy steel and non-ferrous metals. 4. It can make the thread form of good quality. And it has the high precision. 5. It works safe and reliable. It can works all day long, and can save steel and energy. 6. It adopt innovative design and advanced technology, easy to operate. 7. It can be used to process screw and rebar. The rebar processed by the machine has the good overall mechanical. It can make the tensile strength increased by 20%-30%, the fatigue strength increased by 40%-60%, corrosion resistance increased by 50%-200%. Mechanical properties of rebar connector reached and more than international standards. Model Z28-200 thread rolling machine: Rolling thread range Diameter 64mm Max thread pitch 6mm Spindle angle ±10° Max rolling pressure 300kn Spindle RPM 22/28/35/45/56/70rpm Roller size range Outside diameter 210mm Hole 75mm Max width 150mm Rolling time 0.1-99.9s Rest time 0.1-99.9s Spindle drive power 11kw Hydraulic transmission power 5.5kw Cooling pump power 90w Dimension 1900*1700*1450mm Weight 2500kg Any interesting pls contact zhihaomachinery freely. Email: sales@zhihaomachinery.com Mob/whatsapp: +8615512868421

Minimum Order: 1 bags

The Zhongkeneng (ZKN) Planting Special Heat Pump Unit is a heat pump unit developed by the company based on many years of experience in heat pump production. Relying on advanced control systems and the reverse Carnot cycle principle, it uses the cycle to collect heat energy from groundwater or air, and then converts energy. The outlet temperature is 35℃~55℃ during heating. It is a device that uses geothermal energy or air energy and other low-level energy sources for heating. It is suitable for temperature control places such as greenhouse planting, greenhouses, cultivation, flower fields, agriculture, and ecological gardens. ● Z-For Planting ● R22 Not Indicated ● Nominal Heating Capacity: Unit Kw ● Sf-Water And Air System ● Brand: Zhongkeneng (ZKN)

Applicable Places: Water-cooled chillers have the advantages of high efficiency, low noise, reasonable structure, simple operation, safe operation, convenient installation and maintenance, etc. Water-cooled chillers are widely used in the comfort central air-conditioning systems of public facilities such as hotels, shopping malls, office buildings, exhibition halls, airports, and gymnasiums. Water Cooled Scroll Chillers Features ● Wide Selection Range This series of units has a cooling capacity range of 75KW~3350KW, and there are a variety of specifications to choose from. Each specification of the unit has two control modes: ordinary computer control and luxury computer control. It can undertake non-standard products such as low-water-temperature ethylene glycol water-cooled chillers. - Single Compressor Series - Double Compressor Series (Single Evaporator Type) - Four Compressor Series

In the past, traditional measures for winter heating or insulation in aquaculture were mainly boiler heating, insulation equipment, etc. With the development of the heat pump industry, some aquaculture owners have begun to use this new type of heat pump constant temperature unit to create suitable conditions for their aquaculture. In the application of aquaculture, the aquaculture water is not directly heated, but the water heated by the heat pump unit passes through the auxiliary equipment laid in the pool to slowly heat up the aquaculture water body using the principle of heat transfer. At present, the boiler heating and combustion commonly used in aquaculture has high energy consumption and is accompanied by a large amount of toxic and harmful exhaust gas emissions. Constant temperature aquaculture equipment can solve the above problems well. The water source heat pump constant temperature aquaculture unit is efficient and energy-saving, in line with the development trend, and can also save energy costs for farmers. At the same time, the water source is green and pollution-free, safe to operate, can maintain temperature well, is easy to operate, and does not require special supervision, which is not only conducive to the growth of aquaculture but also saves a lot of labor costs.

Applicable Places: Normal Temperature Air Source Heat Pump is widely used in comfortable central air-conditioning systems of public facilities such as hotels, shopping malls, office buildings, exhibition halls, airports, gymnasiums, etc., and can meet the different usage requirements of process air- conditioning systems in electronics, pharmaceuticals, biology, textiles, chemicals, metallurgy, electric power, machinery. Technical Parameter Table Normal Temperature Air-Cooled Chiller (Hot Water) Unit Performance Parameter Table Unit Model CTEFMR65A CTEFMR140A CTEFMR280A Cooling Capacity 65 kW 140 kW 280 kW Heating Capacity 68 kW 150 kW 300 kW Power Supply Three-phase 380V 50Hz Total Input Power 20.8 kW 43.8 kW 87.6 kW Compressor Type Fully Closed Rotary Refrigerant Material R410A Control Method Electronic Expansion Valve

The Air Series Ground Source Heat Pump Unit system does not emit any exhaust gas, wastewater, or waste residue to the outside world during operation, which is an ideal "green air conditioner". It saves 40% more energy than traditional air conditioners and 48% more efficiency than gas furnaces. The energy efficiency ratio of the whole machine is above 4.0. Applicable Places: Small places such as villages, towns, rural areas, villas, etc. that need cooling and heating. Core Advantages Cost Saving ● Initial Installation Cost Saving ● Operation Cost Saving ● Installation Time Saving

Mould Oscillation and Deflection Detection Instrument Overview The mold is a device that shapes the cast product in continuous steel casting, and it is also the core equipment and key technology of continuous casting machine. The main function of the mould oscillation deflection detection instrument is to detect the the mould oscillation table’s oscillation frequency, amplitude, deflection rate, phase, oscillation trajectory curve, etc. Through the detection and adjustment of the detection instrument, the mold moves along the outer arc of the continuous casting machine according to the given amplitude, frequency and waveform deflection characteristics. The actual oscillation parameters of the mold oscillation table during the operation and production process and the process parameters of the cast products cannot be effectively known without the data detection of the mold deflection detection instrument, so that the operator cannot adjust the mould’s production process parameters in real time according to the real- time situation of the on-site production. The continuous casting mold deflection detection instrument independently developed by our company is suitable for various molds such as slab, square billet, round billet and shaped billet. The system obtains the process parameters such as actual oscillation holographic parameters and negative slip amount of the oscillation table by effectively detecting the movement of the mold. The technicians can formulate the control strategy of the mould according to these actual parameters, and improve the output and quality of the product within a safe and reliable range. The structure of the instrument Continuous casting mold oscillation and deflection detection instrument is mainly composed of sensor system, sensor signal conditioning circuit, power supply circuit, synchronous data acquisition module, communication cable, and software data analysis system. There are three axial acceleration sensors installed in the mold oscillation and deflection detection instrument, one of which is to detect the vertical oscillation signal (Y axis), and the other two are to detect the horizontal oscillation signal (X and Z axis). The signal obtained by the sensor is processed by the preprocessor and the preprocessing module. The oscillation signal and sensor status signal will be filtered and normalized, sent to the synchronous data collector for digitization and feature extraction, and the data is analyzed and processed by the master computer software to obtain various oscillation parameters and process parameters required by users. The functions of the system 1. Adopting mould oscillation X/Y/Z three-dimensional data acquisition, using high-precision sensor system and high-sensitivity axial accelerometer, comprehensive detection of equipment oscillation state, including: 1) Detect the oscillation frequency of the mold oscillation table 2) Detect the amplitude of the mold oscillation table 3) Detect the deflection rate of oscillation 4) Detect the lateral deflection, longitudinal deflection, phase, and phase difference of the mold oscillation table 5) Three-dimensional display of the oscillation trajectory, and the oscillation table trajectory can be viewed from all sides of the oscillation table 6 (X-Y, X-Z, Z-Y) 2. The software system adopts the design of man-machine interactive graphic interface, which can display the mold oscillation state in real time. The software functions include: 1) Real-time data curve display: oscillation waveform, oscillation frequency, signal superposition analysis 2) Single-axis curve display, multi-axis curve display, amplitude, acceleration, three-dimensional graph 3) View historical curve 4) Generate test report 5) Give a warning prompt 6) Spectrum analysis function 7) Long-term storage of data 3. Portable measurement method, which can provide handheld detection equipment with wireless remote transmission, and the operation is simple. 4. Provide an overview of inspection parameters under the full screen, displaying all data including oscillation parameters and process parameters. At the same time, the calculation and display of the oscillation spectrum is completed in real time, which is used to evaluate the waveform distortion of the entire oscillation table, and to determine whether there is a problem with the installation of the oscillation device. 5. Alarm management. Record each alarm data under real-time alarm conditions to analyze the cause of the alarm and evaluate the impact of the alarm on production. 6. Parameter setting. Users can set the ideal oscillation value and normal working range of various steels online. We also can set the alarm limit, and the storage time of the database etc. 7. After charging the device once, it can work continuously for more than four hours. 8. Integrate embedded processing equipment to realize data collection, display, analysis, reporting and other functions. 9. According to the mold characteristics and user requirements, it can be flexibly configured, wich is suitable for all types of molds such as square billets, slabs, round billets and other mold oscillation tables. 10. Support wired and wireless data transmission functions, easy to use. 11. Use the laptop to receive the collected data, can be used for the operation test on site, and can analyze and process the data conveniently. The features of the system 1. The actual oscillation state replaces the ideal oscillation state. The actual oscillation state of the table is used to formulate a control strategy, so that the oscillation table can be used to produce products with more accurate oscillation. 2. Convenient detection method. The equipment can be used for on-site inspection at any time, and the production site can grasp the operating status of the on-site equipment in time, so that we can make production adjustments to the equipment at any time. 3. Efficient working methods and processing platforms. The high-integration equipment developed by embedded technology can work in high temperature and harsh environment. This system can comprehensively detect XYZ three-axis data, and realize real-time data analysis and processing with high-speed data operation and processing platform. 4. Powerful database function. The database adopts the mode of computer automatic management and operator's manual assistance management, and there are tables for recording historical data and alarm data and working parameter setting table of monitoring system inside the database. By adjusting the output range, the best output effect can be obtained.

Minimum Order: 1 bags

MDC-K120 Slab Mold Taper Measuring Instrument Overview The taper of the narrow face of the mold has an important influence on the quality of the casting billet. Excessive taper will cause the mold to squeeze the billet shell, and a small taper will increase the air gap. With the continuous increase of the requirements of the casting billets’ quality and the continuous introduction of high-precision molds, the current taper measuring instrument in the domestic market generally have low measurement accuracy and complex measurement methods, which restrict the development of production. The new-generation taper measuring instrument developed by Wuhan CenterRise M&C Engineering Co., Ltd. adopts imported high-precision inclination sensor, combined with ultra-low power consumption processor, which can quickly and accurately measure the actual taper value of the narrow copper plate of the mold. The instrument is fully functional, easy to use and suitable for slab molds of various lengths. Most of the current slab molds are single-taper, a narrow flat copper plate. The taper value required for production can be achieved by adjusting the angle between the narrow copper plate and the direction of gravity. The taper measuring instrument directly measures the angle between the narrow copper plate and the direction of gravity. According to habits and production needs, the angle is converted into the value of one-sided shrinkage of the upper and lower ports. The main features 1. Easy to calibrate, stable performance, easy to operate 2. Self-supporting, self-aligning, self-balancing 3. High measurement accuracy 4. LCD data reading 5. Fast response, real-time display reading 6. Adjustment of dynamic intelligent system 7. Lithium battery power supply, suitable for on-site use of mobile operations 8. The continuous measurement time is more than 36 hours 9. The sensor adopts multiple protections to meet the needs of on-site harsh environment measurement 10. The weight of the whole system is less than 3.8 kg, and it is equipped with a set of zero-point calibration table, which is convenient for on-site installation and measurement 11. Applicable to various arc, parabolic and straight molds The performance and index 1. Measuring range: -3°~ +3° (measurement length can be customized according to users’ needs) 2. Measurement accuracy: 0.01mm 3. Temperature range: -25℃~+85℃ 4. Linearity deviation: -0.03mm ~ + 0.03 mm 5. The longest usage time after fully charged: > 36 hours 6. The longest storage time after fully charged: 2 months The main components 1. Measuring instrument: central measurement and control unit, measuring sensor 2. Measuring stand 3. Standard table: standard surface, support frame, spirit level

Minimum Order: 1 bags

Mould Online Width Adjustment and Taper Measurement Overview In order to meet the needs of producing various specifications of continuously cast products, shorten the time for replacing the mold, and improve the production capacity and production efficiency of the continuous casting machine, the mold online width adjustment system is the key technology for efficient continuous casting. The online mold width adjustment system enables the two narrow sides of the continuous casting slab mold to move inward or outward in small steps until the predetermined width is reached. During the production process, the adjustment of the mold’s width can be completed without stopping the machine. Generally, the online width adjustment of the mold needs to be connected with the online taper measurement of the mold. Only with adjustment and detection can the online adjustment range of the mold be accurately controlled. The components of the system Workstation: host system, system width adjustment control, taper detection. On-site operation box: real-time display of the current control status, manual operation to adjust parameters. Digital Electric Cylinder: Precise digital control of electro-hydraulic drive cylinder, which can achieve high-precision quantitative control. On-line measurement of taper: Install it on the narrow-face copper plate of the mold, and monitor the taper of the narrow-face copper plate in real time. Cooperate with the detection feedback control of the width adjustment system, so as to achieve high-precision adjustment. The technical parameters Adjustable range: 0-1250mm (unilateral) Control accuracy: 0.02mm/0.05mm/0.1mm Step resolution: 0.01mm/0.02mm Running speed: 0-10mm/s Power: 3.5KWl 16-bit encoder: 65536 pulses Weight: 25Kg Shell: high-strength aluminum alloy The functions of the system Realize online width adjustment function Realize the online real-time monitoring function of mold taper Continuous casting production adjustment and non-stop production One-key operation in the main control room, automatic completion High adjustment accuracy and fast speed The interlock control of the continuous casting steelmaking system can realize automatic steel pouring

Minimum Order: 1 bags

ZSQ-T200 Online Surface Quality Inspection System for Continuously Cast Product (CCD) Overview The surface quality inspection of high temperature cast product is of great significance to the repair of cast product’s defects and the hot delivery of hot cast product. The ZSQ-T series of online surface quality inspection equipment for casting billets developed by Wuhan CenterRise M&C Engineering Co., Ltd can detect the defects such as scratches, cracks, holes, pits, edge cracks, edge defects on the surface of the cast products, and meet the customer's requirements for the quality inspection of the surface of the cast product. The principle of the system The ZSQ-T200 online surface quality inspection system for continuously cast products adopts the principle of optical imaging and uses a CCD image sensor to input the surface image of the cast products to be detected into the computer, and then the obtained image is processed by special image processing software to find out whether there is any defect in the image. After the defects in the image are obtained, the obtained defects are classified through a special self-learning system, and finally the requirements of the computer to automatically identify the surface defects of the cast products are achieved. The composition of the system 1. Optical part: The optical part is composed of multiple fixed-focus lenses and linear CCD, which mainly realizes scanning and imaging of the surface of the cast products. 2. Lighting part: The lighting part is composed of a high-brightness LED array and a cylindrical lens, which realizes high-brightness and high- uniformity lighting on the surface of the cast products. 3. Mechanical structure part: The mechanical structure part mainly realizes the adjustment, installation and fixing of the optical part and the lighting part, and consists of the imaging head (optical part), light box (lighting part), bracket and control cabinet. The structure is required to be stable and reliable. 4. Real-time processing: The real-time processing part is completed by the multi-CCD data real-time sampling processing unit (high-speed DSP) independently developed by Wuhan CenterRise M&C Engineering Co., Ltd. 5. Hardware part: The hardware part consists of high-speed storage controller and storage hard disk array, Gigabit InternetMAC controller, Gigabit Ethernet PHY. Rj45, and multiple high-speed workstations. 6. Detection software: The detection software mainly realizes the functions of collection, storage, transmission, processing of CCD scanning images, extraction of defects, analysis of defect characteristics, calculation of defect size and position, storage of defect images, generation of cast product’s surface quality analysis reports. etc.

Minimum Order: 1 bags