Industrial Machinery & Equipment

Collection • All parameters • Wind intensity • Temperature and humidity in working area • Output power • Check the frequency modulator • Equipment balance Control • ON/OFF • Air outlet angle setting • Wind intensity setting • Water flow adjustment • Backblowing and dust removal function Timing • Switch time setting • Holiday function setting • Automatic temperature control setting • Regional temperature setting • Automatic dust removal setting Setting • Wind speed limit setting • Cold and hot season setting • Anti-freezing protection setting • Control mode Benefits of AirTS-V Air-conditioning Control System The primary goal and benefit of HVAC controls is to provide a comfortable environment for occupants. By combining input data with precise control of the system, you can virtually eliminate hot/cold spots throughout the building. On average, heating, ventilation and air conditioning (HVAC) operations account for nearly half of a commercial facility's energy consumption. By applying control strategies that reduce energy consumption, facility managers can significantly reduce energy costs and reduce their overall impact on the environment.

The air curtain machine produces high-speed air flow to divide the interior and exterior into two independent temperature areas to create the comfortable indoor environment and keep the effect of indoor air conditioning and air purification. It circulates the air and effectively isolates dust, exhaust gas, bad smell, inset and other germs while saving electricity. Prevent cool air (heat) from escaping, save electricity to form the air door to effectively prevent cool air (heat) from leakage.  For saving electricity, the Hot Gate Air Curtain divides the interior and exterior into two independent temperature areas, and adjusting the temperature when the air conditioning is running for a long time, so as to save energy and improve the environment.  It has the effect of dust prevention and insect prevention. The air curtain machine generates a highspeed air flow to form a protective door to effectively prevent the invasion of outdoor dust and winged insect and keep indoor clean. 

The VRF air conditioners, also known as "one-to-many," is a type of system where one outdoor unit is connected to several indoor units. Each indoor unit can operate independently or be controlled together. The system has an outdoor unit connected by pipes to indoor units that have components like outdoor heat exchangers, compressors, and other parts. The indoor units consist of fans and direct cooling elements. Using the pipes, the outdoor unit can supply cooling liquid to many indoor units. It controls the compressor's cooling fluid circulation and the flow into various indoor heat exchangers to meet the indoor cooling and heating needs. The system's working principle is simple: the indoor temperature sensor controls the valve on the indoor unit's cooling pipe. By adjusting the pressure, the system can control the outdoor unit's compressor speed or change its operating mode to adjust the cooling capacity according to the load. Outdoor Module VRF Air Conditioning System Application Office buildings Hotels and resorts Shopping malls Hospitals and medical facilities High-end residential complexes

By adjusting wind speed and air outlet angle, it achieves comfortable heating environment Supply air angle stepless regulation Utilize axial fan to efficiently recover heat from the top, reducing heat loss from the roof, achieving energy-saving effects High: continuously recover heat from the top space to send the heat to the working area at the bottom Why Choose This Recirculated Air Electric Heating Unit? ●  Electric heating option for large-space HVAC: Unlike gas or hot water systems, this recirculated air electric heater uses PTC-type electric heating elements—ideal for facilities where hot-water or steam is unavailable but a clean, efficient heating system is required.  ●  Effective recirculation of high-bay air: The unit draws warm air from the upper region of the facility, re-pressurises it via a high static pressure axial fan, then distributes it downward through converging nozzles and louvers for even temperature in the occupied zone.  ●  Optimised for large volume spaces (4-30 m high): Suitable for large- space warehouses, manufacturing plants, hangars, exhibition halls where the volume is significant and conventional electric heaters cannot provide sufficient throw or uniformity. ●  Energy-efficient electric heating for recirculated air systems: By recirculating air rather than heating entirely fresh outside air, this system reduces energy input and heat losses—making it a smart choice for energy- saving electric recirculated air heating solutions. ●  Flexible installation & control: Variable frequency fan drive, wireless or linked control, automatic monitoring of data and safety features like fall- protection alarms, filter-self-cleaning—makes it part of smart industrial HVAC system.  ●  Improved comfort and productivity: Even, consistent warmth in the working zone means fewer cold spots, no large temperature gradients, better employee comfort and safer operations—in turn improving productivity.

The Side-Mounted Heating Unit from AirTS is an advanced industrial air heating system designed for factories, workshops, and warehouses where sidewall installation is more practical than ceiling-mounted systems. Using high- efficiency heat exchangers and horizontal airflow design, this energy-efficient air heater delivers powerful, even heating across large working areas while saving valuable vertical space. Side-mounted Heating Unit Features Use an air suction axial fan to efficiently recover heat from the top, reducing roof heat loss and addressing thermal drift issues during winter building heating for energy-saving benefits. Adjusting wind speed and air outlet angle allows for comfortable heating in the working area without creating a sensation of wind. Aligning the aluminum foil fins of the air exchanger with the airflow direction successfully resolves condensate water leakage. Efficient heat exchange enables quick warming of the airflow. Side-Mounted Heating Units Applications Industrial workshops and manufacturing plants Warehouses, logistics centers, and assembly areas Automotive facilities, painting rooms, and textile factories Printing and packaging lines or processing halls Any high-efficiency side-blowing heating project requiring stable indoor temperatures Side-Mounted Heating Units Advantage Feature Benefit Side-mounted design Maximizes floor and ceiling space Adjustable louvers Targets the airflow where heat is needed Modular installation Scalable for large or complex layouts Low energy consumption Optimized coil and airflow system Smart control options Supports wireless or automatic temperature regulation

Features 1. Exquisite, compact design, excellent conception, small footprint. 2. The Chinese and English PLC operation menu on the computer touch screen is easy to learn and understand. 3. Quick change of process and materials. 4. Efficient servo motor drive, high precision, fast speed. 5. Easy maintenance, high cost performance, fully digital debugging Power supply：AC220V 50/60HZ (single phase) Capacity：5000 pieces/hour (length within 100mm) Processing wire range：AWG＃32-AWG＃18 Cutting length：20mm-1000mm Cutting accuracy：0.01mm Stripping length： 0.1mm-10mm Crimping capacity：2.0 tons (2.5T/3.0T terminal machines are available on request

Minimum Order: 1 bags

8 Ton Lithium Battery Underground Locomotive for Mining Battery electric locomotive is a kind of track traction equipment powered by batteries, which is generally used in mines. There are two types of battery electric locomotives, explosion-proof type and ordinary type. The explosion- proof type is mainly used in coal mines. There are also many options in terms of speed regulation and braking methods. Speed control methods include resistance speed control, chopping speed control and frequency conversion speed control. Braking methods include pure mechanical braking, hydraulic braking and compressed air braking. In addition, electric braking can also be selected as an auxiliary braking method. Adhesive / total weight (t) : 8 ton Track gauge (mm) : 500.600.762.900 Traction (KN) : 11.18 or 12.83 Max. Traction (KN) : 19.62 Speed(km/h) : 6.2~7.8 Battery Voltage (V) : 110~140V Battery Capacity (Ah) : 440 Power (KW) : 11 or 15 KWx2 Dimensions Length(mm) : 4420 Width(mm) : 920,1082 or 1220 Height(mm) : 1600 Wheelbase (mm) : 1100 Wheel diameter (mm) : 680 Min Curve radius (m) : 7 Controller : Resistencia or IGBT Braking method : Mechanical or air brake Advantages of our product 1.Using high-quality steel plates, special rust removal process make sure it more anti-corrosion and suitable for harsh mining environment. 2. Producing motors ourselves, using high lever insulation material and pure copper, ensure the powerful traction force, and suitable for harsh mining environment. 3.Gear anastomosis surface to reach more than 80%, which is far more exceeding the standard. 4.Professionally designed and adjusted frame ensure safe driving and avoids falling off rails. 5.A variety of braking methods can be choose, air brake, hydraulic brake, electric brake, mechanical brake to ensure the safety drive. 6. 40 years richful experience with the ability to design and make customized product according to your requirements. 7. Proving factory online-visiting Mining Locomotive test 1.Before Running the locomotive,carry out gear debugging, lighting, gear, and brake adjustment etc.To ensure the normal operation of the locomotive. 2.Carry out a tensile test before leaving the factory to ensure the load performance of the locomotive meets the standard. Our design standards generally exceed the national standard by 10%-20%. 3.Carry out different type running test before leaving the factory to ensure the performance and normal operation of the whole locomotive. It can adapt to various harsh conditions under simulated working conditions. Motor test The motor has to go through many inspection procedures before leaving the factory, and each motor has to be carried out with load running experiments. Explosion-proof motors are carried out with water pressure test. All the test of motor is to ensure that can adapt to harsh working conditions. Cases 1. A good feedback of our lithium battery locomotive from a client of Latin America 2. In order to solve the exist problems of lead-acid batteries. More than 30 lead-acid battery electric locomotives in this large mining were changed into lithium battery electric locomotives, which improved the work enthusiasm and production efficiency of employees, reduced costs,and more environment- friendly. 3. The mining rock drill car designed by Sunward Co., has a small size and simple structure, so the space for placing the lithium battery on the body is very limited. According to the limitation size, our company design a lithium power supply power plan, which perfectly solves the problem of lithium power supply space. In order to adapt to the special industrial and mining environment and improve transportation efficiency, a batch of 2.5-ton lithium battery electric locomotives are designed to Myanmar Clients. FAQ What's your product advantages? We have more 40 years experience in this field so that we could design or produce the locomotive as your requirement. We could also provide online service to teach you how to operate and maintain the locomotive. The most important thing that we produce the main part of the locomotive- The traction motors. we could guarante the power of the locomotive. 1.Pre-sales Service: The wide product range enables us to provide our customers with individual machines or complete processing plants. Based on our customer's request and budget, our experts make efficient and reliable solutions, and we produce strictly follow customers' order. What's more, every customer has the chance to visit the working machine in the site before placing the order. 2.After-sales Service: Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the quarry site to help install the customer's plants.Necessary training about machine daily maintenance to local workers is provided also. 3.Methods of Payment: T/T (Telegraphic Transfer) or Western Union or L/C at sight Handling time for an order: Within 10 days supplied from stock 4.Shipping method: Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or by air Bulk order: we suggest by air or by sea. 5.Quality Control: We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 6.After Services: a. Our sales team will response for your question within 24 hours (Holiday is Excluded) b. Technical Support will be available in any time c. Free replacement will provide once the failure confirmed caused by our product quality

Minimum Order: 1 bags

Engineered specifically for coffee bean sorting, the HS-G Premium efficiently handles both green and roasted beans, including Arabica and Robusta varieties. With advanced optical technology and intelligent algorithms, it precisely removes defective beans such as black, moldy, insect-damaged, immature, unhulled, and burnt beans, as well as foreign impurities like stones — achieving a purity rate of up to 99.9%. To further enhance performance, the HS-G Premium can be equipped with a next- generation dust removal system, which significantly reduces airborne dust during operation and improves both sorting accuracy and efficiency. Tailored sorting solutions are also available to meet the diverse needs of small, medium, and large-scale coffee processors, helping ensure consistent product quality and premium-grade output across every production scale.

Minimum Order: 1 bags

Parameter information: Input power supply: 200V 50HZ Working voltage: 24V Power: 100W Dimensions: 250 * 380 * H240mm Weight: 13KG Working pressure: 0.5-4MPa Thread length: 10-80mm Applicable wire diameter: AWG18-AWG32 Machine features: Twist twisted pair wires and network cables straight for easy processing The downward pressure cylinder can adjust the downward pressure height, left and right Swinging is powered by an electric motor, which is stable and efficient Before rubbing, straighten it before rubbing

Minimum Order: 1 bags

Special Features： Adapt to global power supply：AC220V 50 60HZ Diagnostic function Processing database can be connected to the computer for storage Small, light, can be placed on the desktop, easy to carry Password protection for different user levels Maximum cable diameter :7 mm Minimum cable diameter:0.2 mm Diameter increment:0.01 mm Maximum stripping length:50.00 mm Number of layers :10 Clamping force:Motor control mode, adjustable in 10 different levels Processing Capabilities:700-1200PCS/hour (depending on cable type and program) PC Interface:RS 232, foot switch Program memory capacity:99 cable programs can be saved Noise:50dB (A) power supply:AC220V 50 60HZ Weight:About 30 kg Dimensions (L x W x H):540x 230x 330mm

Minimum Order: 1 bags

Model NO. -60kpa Vacuum Gauge Accuracy -60kpa Vacuum Gauge Display Pointer Application Indu , strial Structure Spring Pressure Gauge Connection Type Radial Direction Function Local Indication Type Installation Structure Direct Mounting Features of Measurement Medium General Pressure Gauge Indicating Pressure Reference General Pressure Gauge Apply Air Blower Material Type Aluminium Alloy Pressure High Pressure Current Type AC Transport Package Wooden Case Specification 2kg Trademark Green , tech Origin China HS Code 8414 Production Capacity 5000pieces/MonthGreentech Industry (Jinan) Co., Ltd. Greentech International (Zhangqiu) Co.,Ltd Tel:+86-531-83117088, 83270018 Skype: guanglin_jiang WhatsApp: +86-13869171699 Email: greentech@vip.163.com http://www.china-blower.c , om www.facebook.com/100026385873611 www.tikt , ok.com/@davidlau965 www.youtube.com/@gaoanna-s7 , u https://www.instagram.com/gaoanna77/ www.greentechblower.com

Minimum Order: 5 dozens

Glue dispensing range X/Y/Z (mm) ：300/300/100/360 Programming method ：Teaching programming or graphic import Movable graphic trajectory ：Points, lines, arcs, circles, curves, polylines, spirals, ellipses Glue dispensing head ：30ml syringe holder Glue dispensing bucket：30ml or 50ml Minimum throughput ：0.01ml Glue dispensing frequency ：5 times/second Maximum load ：10kg Movement speed (mm/sec) ：0--500 Repetitive accuracy ：± 0.02 mm control mode ：Microcontroller+handheld box Display method ：LCD teaching box Motor system ：Shinano Motor, Japan Input power supply ：Full voltage AC110V~220V External control interface ：RS232 External dimensions ：540*580*650 Body weight (kg) ：48 KG

Minimum Order: 1 bags

rj45 crimping machine: 1.Special pressure British or American telephone plugs. 2.Die replacing simple. 3.Operation of rare error, high accuracy. Feature: 1. The cable crimping machine is specially design for producing internet and phone wire. 2. Various crimping die for your option. 3.Special pressure British or American telephone plugs.Die replacing simple.Operation of rare error,high accuracy.Phone PC Head Machine 4P,6P,8P and the UK head can be applied. 4. It can press normal PC terminal ,English and net plug.High precision and low noise,easily setting. Power:AC 110V/220V Stroke strength:94g Dimension:310Lx160Wx140H(mm) We , ight:11Kg

Minimum Order: 1 bags

Product Parameters Model: Dual-wire 2.5 square wire cutting machine Power supply: AC 110Y/220V/50/60Hz Dimensions: 390x350x255 Display: Chinese and English LCD display Weight: 30kg Power Rate: 1G0(W) Cutting Length: 1-9999mm Cutting Tolerance: (0.2-0.002xL)mm Cutting Error: Correctable Stripping Length: 0-35mm for the beginning of the wire, 0-15mm for the end of the wire Center Stripping: 11 stripping locations Wire Cross-Section: 0.2-2.5mm 2LAWG (16#-AWG30#) Maximum Conduit Diameter: 46mm Applicable Wires: PVC, Teflon, Silicone, Fiberglass Blade Material: Hard Tungsten Steel (Imported Stainless Steel Optional) Stripping Speed (Pieces/Hour): 3000-8000 Pieces/Hour (L=100mm) (High Output) Drive Mode: Two-Wheel Drive Machine Description 1.The fully automatic computer wire stripping machine, which integrates electromechanical and microcomputer, is a fully automated CNC equipment that has introduced advanced technology from Japan and Taiwan. 2.It is widely used in the wiring harness processing of various products such as the electronics industry, auto parts industry, electrical appliances, motors, lamps, toys, etc. 3.Suitable wire materials for stripping include PVC/Teflon silicone wire/glass fiber, etc. 4.This product adopts LCD screen human dialogue mode, and has the main features of beautiful appearance, simple operation, convenient maintenance, stable performance, fast speed and high accuracy. 5.The wire length can be set arbitrarily and modified according to customer requirements. It can strip wires of different thicknesses and also has the function of cutting flat cables, sheathed cables, power cables and casings.

Minimum Order: 1 bags