Other Machinery

Stainless Steel 304 Industrial Grain Microwave Dryer Machine run with electric energy, it is clean and friend to the environment. It is widely used in different industries, such as: food, tea, herbs, paper, wood, chemical, grains, nuts, seasoning etc with its multi functions, such as: drying, dehydrating, sterilizing, baking, fixing, heating, degreasing and so on.

●CNC Aliminium Copy Router is suitable for the processing of round holes, slot holes, key holes, special-shaped holes of industrial aluminum alloy profiles, doors and windows, curtain wall aluminum alloy profiles, and aluminum profile milling, chamfering, plane engraving and other processes. ● The main shaft adopts an air-cooled electric main shaft with a power of 2×6KW and a speed of 0~18000 revolutions/min. It has high precision, good safety and high reliability. ● Power Supply: 380V/50HZ (According local voltage, can be 220V, 440V...) ● Power: 14.5KW ●Air Pressure: 0.6~0.8MPa ●X axis Journey: 3200mm ●Y axis Journey: 400mm ●Z Axis Journey: 300mm ● X axis Speed: 60M/min ● Y/Z axis Speed: 40M/min ● Overall Size: 4000*2000*2600mm

IP54 Wind Power Horizontal Wind Turbine,Residential Wind Power With Low Vibration Home Wiring. Wind turbines work on a simple principle: instead of using electricity to make wind—like a fan—wind turbines use wind to make electricity. Wind turns the propeller-like blades of a turbine around a rotor, which spins a generator, which creates electricity. The terms "wind energy" and "wind power" both describe the process by which the wind is used to generate mechanical power or electricity. This mechanical power can be used for specific tasks (such as grinding grain or pumping water) or a generator can convert this mechanical power into electricity. For permanent magnet excitation, the generator achieves maintenance-free operation and reduced failure rates by removing the external excitation slip rings. Since no external excitation system is required, the power generation efficiency is improved. By using water cooling and an internal fan cooling system, the generator does not draw air from the outside, which is suitable for environments with many fine particles in spaces or coastal/offshore areas. Small wind turbines, sometimes called domestic wind turbines, are much smaller than the turbines you see at wind farms. While large wind turbines have blades that can span the length of a football field, smaller wind turbines are often up to 10 meters in diameter. Due to the smaller blades, the power output of these wind turbines is much smaller than that of larger turbines. This makes small wind turbines ideal for projects with smaller power demands, such as residential, portable or off-grid applications. The best locations for small wind turbines are those that experience frequent, high wind speeds. Generally speaking, the taller the turbine, the stronger the ambient wind and the stronger the power generation capacity. The best locations for small wind turbines are mostly in rural areas, as these tend to have large spaces with few obstacles that would affect wind speed. In some cases, small wind turbines have the potential to offset 100% of household electricity bills.

ICEMEDAL use a flake ice machine and an ice rake system for concrete cooling in fishery or large infrastructure projects. Flake ice is perfect to preserve aquatic goods, and we can make it seawater types. Due to the good cooling performance of the flake ice machine, we solved the problem of hydration heat in the concrete forming process. We are a reliable partner that can help you ensure the quality of your business.

Ball Mill Description Ball mill is mainly used for grinding in cement, refractories, chemical, power plant, aluminum, building material, glass, ceramic, steel slag and fly ash, ect. It follows more crushing and less grinding principle to save energy. The feed size to ball mill shall be smaller than 25mm, the output size can be adjusted by revising steel balls ratio. Application Ball mills are used for grinding materials such as bauxite, dolomite, limestone, feldspar, gypsum, steel slag, quartz, manganese, kaolin, spodumene, mica, calcite, fluorite, magnesite, aluminum powder, quartz sand, aluminum powder paste, feldspar, clinker, slag, etc. Outstanding Advantages ZK Corp could customized the ball mill according to customer's demands. 1. Liner of ball mill is made of high-quality wear resistant material with high strength, wear resistance and long working life. 2. Product fineness is adjustable, uniform and high qualified. 3. Good sealing performance. It can be adapted to different working conditions. 4. High grinding efficiency, low energy consumption.

Full automatic clay brick making plant extruding type soil mud brick making Clay brick making machine vacuum extruding machinery Technical parameters of EV full automatic brick making machine of technical parameters: Specification Model Capacity (pcs/hr) Power Requirement (kw) Rotate Speed(t/m) Exterior Dimension (mm) EV45A 10000-13000 Y6-90+45 42/34 6370*1910*2350 6750*1880*2540 EV50A 9000-12000 Y6-55+160 38/25 4400*2200*1250 5600*1800*2500 EV55A 14000-18000 Y6-55+200 27/20 4400*2200*1250 5600*1800*2500 EV60A 180000-25000 Y6-90+250 27/20 7500*2900*2800 7500*2600*2640 EV75A 23000-28000 Y6-315+110 27/20 8200*7300*3400

Heat Expansion And Cold Shrinkage Resistant To Fracture Tomato Continuous Belt Dryer High thermal efficiency: Different airflow modes can be selected according to different materials, maximizing the realization of high-efficiency drying operations under process conditions. Energy saving: automatic temperature control and automatic dehumidification are used for hot air circulation, reducing heat emission, and the heat utilization rate can reach more than 80%, and the energy saving is remarkable. Application: asparagus, beans, kidney beans, lentils, eggplant, red pepper, pepper, black fungus, white fungus, papaya slices, yam slices, bitter gourd slices, radish strips, cucumber slices, mushrooms, mushrooms, ginger slices, garlic, etc. Model DW2×6m DW2×8m DW2×10m DW2×12m DW2×14m DW2×16m Area of dry 3 layers 29㎡ 40㎡ 51㎡ 62㎡ 73㎡ 83㎡ 4 layers 39㎡ 53㎡ 68㎡ 83㎡ 97㎡ 110㎡ 5 layers 48㎡ 66㎡ 85㎡ 103㎡ 121㎡ 138㎡ 6layers 57㎡ 79㎡ 102㎡ 124㎡ 145㎡ 165㎡ Thickness of the material 50---150mm Operation temperature 40---120℃ Drying time 0.5——5 hour or 3——15 hour Motor power 1.1kw 1.5kw 1.5kw 1.5kw 2.2kw 3kw Evaporation,capacity 200-400kg/h 300-600kg/h 400-700kg/h 500- 800kg/h 600-1000kg/h 700-1200kg/h Size of hot blast stove 1.2×2.5×1.7 1.2×2.7×1.9 1.3×3×2 1.3×3×3 1.6×3.5×2.2 1.6×3.7×2.2 Fan 8C-15kw 10C-15kw 10C-22kw 10C-37kw 12C-30kw 12C-45kw Output conveyor 1.1kw Total power 18kw 18.4kw 26kw 41kw 35.1kw 46.7kw

Food Waste Disposer Composting Machine can decompose the food waste into fermented organic fertilizer under the work of beneficial biological bacteria, this can prevent the environment from being polluted by the kitchen garbage. Food waste creates a special problem for towns and municipalities; due to the odor and paste of food waste, multiple picks ups are needed per week. The water content of food waste is between 40% to 60%. Transporting all that waste miles away has a financial and environmental cost. Features: The machine starts a 24-hour process Heat resistant microbes, heat, regular supply of fresh air, and a mixing shaft are used 85% reduction in volume after 24-hours Automatic compost removal directly to collection tank ​Highlights The volume of food waste is reduced by up to 90% within a single 24-hour cycle Minimum labor: The chamber holding processed material only needs to be emptied every 8-10 days A fully automated process, with minimum noise and little or no odors Our machines reducing energy consumption by 15% State-of-the art, proven safety features A touch-screen interface control panel for ease of operation

Feature: 1. Double knife and double shafts for high cutting effciency. 2. Driven by sevo moto, cutting width can be set up freely, high precision. 3. PLC programmable control, operating with touch screen and easy maintenance. 4. Servo or hydraulic knife feeding, auto spraying for knife lubrication, neat cutting edge. 5. Cutting with circular knife, main shaft stepless speed adjustable by frequency conerting, suiable for different material. 6. Manual adjustment or auto adjustment for circular knife angle. 7. Equipped with circular knife cooling system. Technical Parameters: Model UW22-13 UW22-16 Min. Width (mm) 1300 1600 Min. Cutting Width (mm) 3 3 Paper Tube ID (mm) Φ25~76 Φ76 Max. Cutting Dia. (mm) Φ150 Φ150 Cutting Speed (pc/min) 3~20 3~20 Air Pressure (Kg/cm2) 8 8 Total Power (KW) ~7 ~7 Dimension (L×W×H)(mm) 3000*1300*1500 3300*1300*1500

The BTC miner machine's algorithm is 140T and its power consumption is 3010w. It has 4 fans so hat it can cool the machine. There is no need to consider what should we do if the temperature is too high. And the noise level is 75db. The total weight of the Btc Miner Machine S19xp 140T is 16kg, and the packing details is 570*316*430mm. The BTC miner machine S19xp 140T is mainly composed of 3 computer boards, 1 control board, APW12 power supply, 4 heat dissipation fans, and 114 chips. The BTC miner machine S19xp still is used 7NM chip, but the performance is better than the T17 series in terms of performance and stability, and the lines of this machine is not easy to break. It uses the SHA-256 algorithm, with a maximum hash rate of 140TH. The hashrate is large enough to almost guarantee huge profit margins. This BTC miner machine supports ASIC, which means you can monitor mining progress when you are out. Miners should also pay attention to the Market Place and VIABTC tokens under the SHA-256 algorithm. These two are most likely to be the top tokens mined by the platform. Product name Antminer S19xp 140TH/S Algorithm SHA256 Hashrate 140T , Power Consumption 3010W±5% Release May 2020 Size 570*316*430mm Weight 16000g Noise level 75db Fan(s) 4 Power 3010W Interface Ethernet Temperature 0-40 °C Humidity 5-95 %

1. The X/Y/Z axis adopts the linear guide-way structure, and the three-way line rail adopts the heavy pre-pressing process. 2. Assembly main joint surface are hand scraping to ensure the effective contact of the joint surfaces. 3. The spindle motor and pulley are tested by the dynamic balancing instrument to ensure smooth operation. 4. The components of feed adopt precision ball screw, the axial bearing at both ends adopt leading screw special bearing and the ball screw is prestretching. The lead screw and motor are connected by a direct connection rigid coupling without clearance.

HVM vertical mill is a kind of safety, environmental protection, energy saving and high efficiency designed and developed after painstaking research. It is widely used in large-scale material grinding and ultra-fine grinding in cement chemical, coal, electric power and other industries. , is an ideal equipment for the grinding industry that integrates crushing, drying, grinding, grading and conveying. It is used in the preparation of pulverized coal to make the product fineness meet industry standards. Capacity: Different materials, different processing capacity and different output, please refer to the following technical parameter table for details Technical Parameter Model Specifications HVM1100M HVM1250M HVM1300M HVM1400M HVM1500M Output 5～8 t/h 8~10 t/h 10~12 t/h 12~15 t/h 15~20 t/h Main Motor Power 90 kw 110/132 kw 185/200 kw 200/220 kw 220/250 kw Raw Coal Moisture <15% Coal Fineness R0.08=10%～15% (fineness of pulverized coal for blast furnace pulverized coal injection: 200 mesh, 80% pass) Pulverized Coal Moisture 1% to 6% (under the premise of meeting the drying requirements) Model Specifications HVM1700M HVM1900M HVM2200M HVM2400M HVM2800M Output 20~25 t/h 25~35 t/h 35~45 t/h 45~55 t/h 70~90 t/h Main Motor Power 315/355 kw 400/450 kw 450/500 kw 560/630 kw 900/1120 kw Illustrate Note: Raw Coal Hastelloy Grindability Coefficient HGI: 55～70

CS-CU-10 Automatic Loading Tube Cutting Machine Processing area 6016 6022 6035 X /Y positioning accuracy ±0.05MM X/Y repeat accuracy ±0.05MM Maximum moving speed 90M/MIN Maximum acceleration 1.0G Optional laser power ≤6000W tube processing accuracy ±0.5MM Optional bevel function Y Features 1. manpower saving, automatic tube cutting, stable operation 2. Improve the utilization rate of machine tools, high processing efficiency 3. Batch processing, rapid processing, high precision, high stability 4. Can cut all kinds of tubes Application tube processing factory, auto parts, metal furniture, hardware processing, air conditioning tube manufacturing, anti-theft door anti-theft window manufacturing, building materials bathroom, fitness equipment, electrical appliances and so on Laser head WSX/Raytool/EC Laser source GZ/Max/Raycus System Bochu/Weihong Servo system Yaskawa/Panasonic Axis guide OTT/ROUST/Hiwin Rack YYC/leantechnik Speed reducer Shimpo/Motovario

Huatao Silica Aerogel is a synthetic porous ultralight material derived from a gel, in which the liquid component of the gel has been replaced with a gas. The result is a solid with extremely low density and lowthermal conductivity. Nicknames include frozen smoke, solid smoke, solid air, or blue smoke owing to its translucent nature and the way light scatters in the material. It feels like fragile expanded polystyrene to the touch. Aerogels can be made from a variety of chemical compounds. Material Nano Silica Aerogel Color White Density 180-220kg/m3 Applicable Temperature -200 ~ +1000 Hydrophobicity Absolute Hydrophobicity (Below 350) Thermal Conductivity 0.012 - 0.018w/mk (At 25) Low Temperature Bending 99% Breaking Elongation 65% Bending Strength 45KP Compressive Strength 32N