Other Machinery

This 315t automatic wheelset press is used to mount and dismount the wheelset wheels and gears of the type A and B metro cars. It's also applicable for the mounting and dismounting work of wheelsets of the low floor vehicles. It can generate, record, save and print the pressing curve (Pressure vs displacement, pressure vs time) in required format. It only needs one operator to complete all the pressing procedures. Pressing force 315 t Ram cylinder Double cylinders Maximum ram stroke 900mm Ram approach speed 12~25 mm/s, adjustable Ram pressing speed 0~2 mm/s, adjustable Max load of the centring devices 10000 kg Wheelset Support Trolley 1 set with max load of 3000 kg Rotation angle of the trolley 180 degree Hydraulic system pressure Maximum 31.5MPa Main power supply 3 phase, AC, 380V/50HZ Installed power 30 kW Installation space required Approx.6000x7000 mm Inner distance control accuracy Less than ±0.3 mm Wheel position difference control accuracy Less than 0.5 mm Ram positioning accuracy Less than ±0.04 mm Pressure sensor accuracy Not more than 0.25%FS Displacement sensor accuracy Not more than 0.01 mm Concentricity of cylinders' centerline Not more than 0.3 mm Wheelset weight 3000 kg Applicable axle length 1700 ~ 2500 mm Applicable axle body diameter Φ150 ~ Φ180 mm Applicable wheel diameter Φ740 ~ Φ1120 mm Applicable wheel seat diameter Φ185 ~ Φ195 mm Applicable wheel hub diameter Φ200 ~ Φ400 mm

Construction Roll Mesh Welded Equipment Description The construction mesh welding machine is adjustable in speed and mesh opening.So it can make many specification mesh rolls.The vertical wire and horizontal wire are fed in coils.The worker send the vertical wire into the welding position.The horizonal wire is sent by wire straightening and cutting device.This device is part of the main machine.It is connected with the main shaft of the machine through a chain.So this mesh welding machine belongs to full automatic mesh welder. Construction Roll Mesh Welded Equipment Structure The structure of the machine can be devided into five parts. 1. Upper and lower beams of the machine: The upper and lower welding electrodes are assembled on the upper and lower beams. 2. The welding transformer: The transformer converts high voltage into high current 3. Principal shaft: The main shaft connects and drives all parts of the machine through gears and chains 4. The horizontal wire feeding device: This device can pre straightening the horizontal wire before welding. 5. The control cabinet: This is the heart of the machine.You can adjust the speed and length of the mesh by the control system.

water filling machine is mainly used in the beverage filling operations. The three functions of bottle wash, fill and seal are composed in one body of the machine. The whole process is automatic. The machine is used in filling juices, mineral water and purified water in bottles made of polyester and plastics. The machine can also be used in hot filling if being installed with temperature controlling device. The handle of the machine can be freely and conveniently turned to adjust the machine to fill various types of bottles.

UTMOST eccentric plug valve has the outstanding advantages of simple structure, small volume, lightweight, strong flow capacity, wide adjustable range, wide service temperature range, small leakage, good stability, low valve cost, and long service life. The sealing form of the eccentric rotary control valve is hard-seal, which is connected with a pneumatic actuator, matching positioner, solenoid valve, and other accessories to realize proportional adjustment. Eccentric Rotary Plug Control Valve Working Principle The working principle of the eccentric rotary plug control valve is a fan- shaped ball valve with eccentric rotation. The eccentric ball core is tangent to the valve seat, and when it is opened, the spool is separated from the valve seat. When closed, the spool gradually confects the seat of regulating valve types , so that the ball exerts a pressing force on the valve seat. The eccentric rotary valve has a simple flow path and low resistance. Eccentric Rotary Plug Control Valve Structure Feature Compared with single and double seat valves with the same caliber, eccentric rotary plug valve has a larger flow capacity, but its weight is only about 1/3. The spool and the main shaft only rotate, so the friction force it bears when the switch rotates is very small. The flexible arm of the eccentric rotary valve spool produces small elastic deformation and elastic tension under the thrust of the actuator, which makes the contact between the spool and the valve seat more close and firm, so the leakage of the eccentric rotary control valve is very small. At the same time, the thrust required to close the valve is smaller than that of the ball valve and butterfly valve. As a valve manufacturer, Utmost owned a complete process line from machining, assembling, and testing process. Every Utmost designed product with good performance of high or low temperature, corrosion, and high-pressure resistance.

Minimum Order: 1 bags

In contrast with the concentric butterfly valve, a single offset butterfly valve whose stem axis deviates from the center of the disc and the center of the body at the same time, and the sealing pair is an oblique vertebra, is called an eccentric butterfly valve. As one of the professional eccentric butterfly valve manufacturers, our single butterfly valve eccentric type designed with durability in focus has achieved great success in the butterfly valve china market characterized by high quality and affordable prices. Eccentric Butterfly Valve Design Datas Eccentric Disc Butterfly Valve Technical Specification Size 2"~48"(DN50~DN1200) larger sizes upon request Pressure Class ANSI #150~900, PN10, PN100 Body material Carbon steel, stainless steel, alloy steel, duplex steel, etc. Standard compliance ISO 5752, BS5155, API 609, MSS-SP-68, ASME B16.10, ASME B16.5, DIN3202. End connections Flanged Ends OR WAFER, LUG, BW Operation manual, pneumatic, electric, or others Seals NBR, EPDM, VITON, PTFE or metal seat, etc. As one of professional industrial valves manufacturers, we have types of pneumatic eccentric rotary valve for sale, if you have needs, please contact us.

Minimum Order: 1 bags

As one of the best double offset butterfly valve manufacturers in China, UTMOST provides types of superior double offset butterfly valve. The double eccentric butterfly structure enables the spherical surface of the double offset butterfly valve plate and the sealing element surface to be quickly separated and contacted when switching, reducing the friction torque between the valve plate and the sealing element, reducing wear and improving the butterfly flange valve life. Double Eccentric Butterfly Valve Features The double eccentric butterfly plate cannot be separated from the sealing surface near the upper and lower ends of the valve plate in the range of 0- 10°, and it is still in a sliding friction state. At this time, the torque is large, which may easily cause scratches and bites in this area. This can cause seal leakage. From the structural analysis, the double eccentric is a unidirectional butterfly valve. This double eccentric butterfly valve china is mainly suitable for the drainage of water plants, power plants, steel smelting, chemical engineering, water source engineering, environmental facility construction, and other systems, especially suitable for water pipelines, as regulating and intercepting equipment. Compared with the centerline butterfly valve, the double eccentric butterfly valve is more resistant to high pressure, has a longer life, and has good stability. Compared with other valves such as 2 way globe valve, the larger the caliber, the lighter the material, and the lower the cost. Performance Parameter of Double Eccentric Butterfly Valve Pressure rating: CLASS 150~CLASS300 (PN10~PN50) Nominal diameter: 2 "~160" (DN50~DN4000) Temperature range: -196℃～300℃ Main body material: carbon steel, stainless steel, duplex, Hastelloy, Inconel, Monel, Alloy20, Incoloy, Ti, etc. Disc material: carbon steel, stainless steel, duplex, Hastelloy, Inconel, Monel, Alloy20, Incoloy, Ti, etc. Double offset butterfly valve seat material: PTFE, stainless steel, Stellite alloy, etc. Operation mode: manual, pneumatic, electric, hydraulic, etc. As a professional china valve manufacturer, we have types of valves for sale, if you have needs, please contact us.

Minimum Order: 1 bags

Cryogenic flow control valve is suitable for the adjustment of the medium (such as liquid oxygen, liquid nitrogen, etc.) under the low temperature and strong state of -60～-250℃. To ensure the accuracy of adjustment, a positioner must be used. Pneumatic low temperature is composed of a pneumatic membrane actuator and low temperature resistant single and double seat valve. The signal pressure from the regulator is input into the air chamber of the pneumatic membrane actuator to generate thrust, and the cryogenic flow control valve core is driven by the connecting rod. The change of the valve core position in valve control systems changes the flow cross-sectional area of the cryogenic control valve to realize the adjustment of the medium flow. Technical Data Sheet of G115 and G155 Series Cryogenic Control Valve Weights and dimensions of G115 Series Cryogenic Control Valve Weights and Dimensions G115 series dn ANSI NPS 150 6" 200 250 300 350 400 8M 10" 12" 14" 16" GL PN10-PN40 480 600 730 850 980 1100 GL Class 150 RF 451 543 673 737 889 1016 GL Class 150 RTJ 463.5 556 - - GL Class 300 RF 473 568 708 775 927 1057 GL Class 300 RTJ 489 584 DEK5 On request GD 190 240 305 335 395 445 Actuator Type Ul/UTA 0U UTIII 400 UTA 598 UH UTIII 618 UTA 1100 1363 1580 UHV UTIII 888 Weight* ca. kg UTIII 200 260 UTA 340 400 460 760 850 1500 As an reliable industrial valves supplier, we have types of pneumatic butterfly valve for sale, if you have needs, please contact us.

Minimum Order: 1 bags

Cryogenic Butterfly Valve The cryogenic valve has outstanding advantages such as reliable sealing, small opening, and closing torque, high low-temperature stability, and long service life. The actuator of this water butterfly valve adopts worm gear, pneumatic, electric, hydraulic, and other driving methods. The cryogenic butterfly valve is widely used in liquefied natural gas, air separation, and other low- temperature industries. Cryogenic Butterfly Valve Technical Specification Size: 6"~48"(DN150~DN1200) larger sizes upon request Pressure: Class ANSI #150~600, PN20~PN110 Temp.: -196℃~80℃ Standard compliance: ISO 5752, BS5155, API 609, MSS-SP-68, ASME B16.10, ASME B16.5, DIN3202. End connections: Flanged Ends Operation: manual, pneumatic, electric, or other Cryogenic butterfly valve body material: low temp. carbon steel, stainless steel, and alloy steel, etc. Performance Parameter of Cryogenic Butterfly Valve Nominal diameter: NPS 4″-NPS48″ Nominal pressure: CL150lb~CL900lb Medium temperature: -196~120℃ Connection: Flanged RF Body material: CF8, CF8M, CF3M, etc. Trim material: 304, 316, 316L, etc. Leakage level: IV We offer types of valve for sale, if you have needs, please contact us.

Minimum Order: 1 bags

Utmost high-performance auto linear control valve range includes both cage- guided and top & bottom guided valves, as well as single-seated, double-seated and three-way diverting options. Our different types of control valves are used frequently in the Oil & Gas, Petrochemical, Power and Manufacturing industries. The pressure independent control valve of our control valve factory can be fitted with specific trims to manage problems such as noise, cavitation, and erosion and can also be used in conjunction with a number of different actuators. Inconel, Monel, and Hastelloy alloy are on offer; actuators are both on electric and pneumatic options; and the inside nominal diameter ranges between DN15(l/2”) and DN600 (24”), with nominal pressure from PN16 (ANSI150) to PN400 (ANSI2500). Utmost is one of the professional control valve manufacturers in China. We offer a variety of control valves for sale including anti hammer water control valve, motorized control valve, pressure independent control valve and so on. Please contact us to get satisfied control valve price. Control Valve for Sale Single Seat Control Valve The straight-through single-seat control valve is composed of valve body, valve seat, valve core, guide sleeve, valve cover, valve stem, packing and other parts. The valve core and the valve stem are connected together. Self-operated Control Valve Self-operated control valves all use the feedback signal (pressure, pressure difference, temperature) from the valve output end to be transmitted to the actuator through the signal tube to drive the valve flap to change the valve opening to achieve the purpose of regulating pressure, flow, and temperature. Pulverized Coal Flow Control Valve The pulverized coal flow control valve, also known as pulverized coal angle valve, is installed between the pulverized coal feeding tank and the gasification furnace in pulverized coal gasification process units. Fluorine Lined Control Valve The fluorine-lined control valve has the advantages of compact structure, lightweight, sensitive action, S streamlined fluid passage, small pressure drop loss, large valve capacity, accurate flow characteristics. Jacketed Control Valve The valve core of the pneumatic insulation jacket control valve adopts an upper guiding structure, the valve structure is compact, and there is an S streamlined channel so that it has small pressure drop loss, large flow, wide adjustable range, high flow characteristic accuracy, and meets the IEC534 standard. Bellows Control Valve The bellows control valve is a pressure-balanced control valve. The valve body has a compact structure, the fluid channel is S streamlined, the pressure drop loss is small, the flow rate is large, and the adjustable range is wide. Oxygen Control Valve The oxygen control valve adopts a top-oriented structure and is equipped with a multi-spring actuator. It has the advantages of compact structure, lightweight, sensitive action, S streamline flow channel, small pressure drop loss, large valve capacity, accurate flow characteristics, and convenient disassembly and assembly. Angle Type Control Valve The angle type control valve is similar to the single-seat valve except the valve body is angle type. 3 Way Control Valve 3-Ways Control Valve adopts a double spool up and down guide structure, equipped with a pneumatic actuator, the valve body is a three-way structure. Cryogenic Control Valve Pneumatic film cryogenic control valve is a deformed product of single-seat and double seat. It is different from the normal temperature in that it uses a long-necked upper valve cover to make the packing work at a normal temperature. Eccentric Rotary Plug Control Valve Eccentric rotary control valve, also known as cam deflection valve, integrates the advantages of a single valve, butterfly valve, and ball valve, and is especially suitable for the flow regulating of liquid medium containing solid particles. Control Valve Working Principle The control valve is used to control the flow, pressure and liquid level of the medium. According to the signal of the adjustment part, the opening of the automatic control valve is automatically controlled to achieve the adjustment of the medium flow, pressure and liquid level. Control valve types are divided into electric control valves, pneumatic control valve types, control regulating valve types and self-operated control valves. The valve control system is composed of an electric actuator or a pneumatic actuator and a control valve. Control valves are usually divided into two types, straight-through single seat control valve and straight-through double-seat 2 way flow control valve. The latter has the characteristics of large flow capacity, small imbalance and stable operation, so it is usually especially suitable for large flow, high pressure drop and leakage. Control Valve Working Principle Pressure Control Valve Sizing Standardization activities for valve control system sizing can be traced back to the early 1960s when a trade association, the Fluids Control Institute, published control valve sizing standard for use with both compressible and incompressible fluids. The range of service conditions that could be accommodated accurately by these equations was quite narrow, and the control valve sizing standard did not achieve a high degree of acceptance. UTM Control Valve Characteristics and Advantages Compression Types of Control Valve Seat Structure The Key Sealing Components Of Valve Are Imported Brands No Pipeline Connection For Actuator Reversible Installation Of The Actuator The Cutting-edge Control Valve Technology Modular Structure of the On Off Control Valve Utm Modular Control Valve Design Quick Disassembly And Assembly UTM Remote Control Valve The Key Sealing Components Of Valve Are Imported Brands All the packings, balance sealing rings and sealing components of UTM auto pressure control valve are internationally renowned sealing brands. As an industrial valves company, we will do our best to meet all customers’ needs.

Minimum Order: 1 bags

In the well-known butterfly valve technology, its sealing form mostly adopts a sealing structure, and the sealing material is rubber, polytetrafluoroethylene, etc. Due to the limitation of structural characteristics, it is not suitable for industries such as high-temperature resistance, high-pressure resistance, corrosion resistance, and wear resistance. An existing more advanced reliable concentric butterfly valve is a triple eccentric metal hard-sealed butterfly valve, the valve body and the valve seat are connected components, and the sealing surface layer of the valve seat is welded with temperature-resistant and corrosion-resistant alloy materials. The multi-layer soft laminated sealing ring is fixed on the butterfly valve concentric plate. Compared with the traditional butterfly valve, our concentric butterfly valve for sale has high- temperature resistance, is easy to operate, and has no friction when opening and closing. When closing, the torque of the transmission mechanism increases to compensate for the sealing, which improves the concentric flanged butterfly valve. The advantages of sealing performance and extended service life. UTOMST, as one of concentric butterfly valve suppliers, has its own concentric butterfly valve factory. Contact us to get the latest concentric butterfly valve price. Concentric Butterfly Valve Technical Specification Size: 2"~60"(DN50~DN1500) larger sizes upon request Pressure: Class ANSI #150, PN10, PN16 Concentric butterfly valve body material: Carbon steel, cast iron, ductile iron Standard compliance: ISO5752, BS5155, API 609, MSS-SP-68, ASME B16.10, ASME B16.5, DIN3202 End connections: Flanged Ends OR WAFER, LUG Operation: manual, pneumatic, electric, or others Seals: NBR, EPDM, VITON, etc. Concentric Butterfly Valve Datas Main Performance Specification & Materials of Concentric Butterfly Valve Main Parts Main Connection Dimensions of Concentric Butterfly Valve Main performance specification DN(mm) Nominal diameter 50(2")~1000(40") 50(2")~800(32") PN(MPa) 1 1.6 Nominal pressure (MPa) Test capability Housing 1.5 2.4 Seal up 1.1 1.76 Applicable temperature(°C) -165 Applicable medium Freshwater, sewage, seawater, air, steam, food, drugs, all kinds of oils, acids, bases, salts, etc. Materials of main parts Part name Material name Valve body Gray iron, ductile iron, stainless steel Valve plate Ductile iron, stainless steel, and aluminum alloy Valve shaft Carbon steel and stainless steel Valve seat Rubber Seal up O type ring As a professional valve factory, we have types of valves for sale, if you have needs, please contact us.

Minimum Order: 1 bags

1.Performance Parameter: DIAMETER FEEDER GAUGE 36"-46" 54F-126F 18G-36G 2.Features: Round Per Minute 15-30 R.P.PM Standard Equipment Positive feeding device Automatic lubrication device Yarn feed stop motion, needles break detectors Rolling type take down system Automatic cleaning device Yarn creel system Optional Equipment Folding type take down system Lycra feeding units Open width frame Yarn input measuring device Lapping device Circular knitting machine networking system

This CNC press brake uses the tools (standard or special tools) to bend metal sheet into workpieces of various geometric cross-section shapes. It is a sheet metal forming machine designed for cold rolling sheet metal processing. It is widely used in sheet metal bending, such as automobile, aircraft manufacturing, light industry, shipbuilding, container, elevator, railway vehicles and other industries. 1. High bending precision,fast working speed, and efficient,operational safety,performance stably. 2. Good anti-knock frame (welded-steel plate construction), whole frame is been tempering,reduce modification,using large CNC Broing & Milling machine,process in one time, ensure high-precision. 3. Using international famous brand in important components and CNC system. 4. Visual CNC operating panel, easy operation,convenient,multi-functions and practical. 5. All assemblyed parts are produced by CNC Machining Center,according to exact drawing. 6. High executive force,high standard and high professional machine assembled team. 7. Power safeguard design,with light curtain protection,open door power-off function,more safety when operating. 8. Fashion outlook,delicate,and beautiful,machines are compact design,small floor space,easy operation. 9. Providing comprehensive bending program for all press brake,shearing machine user. 10. Replaceable crwoning worktable and the Top tool & V Die, forging and precision grinding, bolts fixing. 11. Thickening the ram and the vertical columns, to ensure the stability of the machine tool and reduce the elasticity. 12. Rational layout of the oil pipeline design, to prevent the oil temperature rise quickly. 13. Rapid production and delivery in time.

1.This equipment has been applied to the welding of rice drum and temperature control area of temperature module. 2.The position of each welding front, back, left, right, up and down can be adjusted, which is convenient for mold adjustment. 3.The ultrasonic welding machine can lift the body, and the mold adjustment is convenient and fast. 4.The modular design of the high-power servo screw mechanism improves the working efficiency by 20-50% compared with the pneumatic equipment, with higher control precision and 0.05mm of repeated positioning error. 5.The ultrasonic welding machine CNC machined the spherical vibrator holder, and the fine-toothed screws were fine-tuned horizontally. The leveling accuracy is higher.

Heavy Duty H beam Assembling Machine KZLS series H-beam assembly machine is applicable to assemble different kinds of H beam such as symmetry,dissymmetry, eccentricity and variable cross-section H beam. It adopts one-side manual or electrical linkage rod adjustment and the other side hydraulic pressing. This machine is easy operation and reliable running. Flange width 200～1000mm Web height 200～2000/2500/3000mm Assembly speed 0.5～0.8m/min Walking speed 6000mm/min(max) Input conveyor length 15000mm Output conveyor length 15000mm Speed control way Frequency control Optional Auto-positioning welding device