Other Machinery

Indoor And Outdoor FTTH Flat Drop Fiber Optic Cable Extrusion Sheathing Machine i-suntop fiber optic cable machine 20220228.pdf 1.Application for Indoor And Outdoor FTTH Flat Drop Fiber Optic Cable Extrusion Sheathing Machine: FTTH Drop Cable Production Line is mainly used to produce 1-4 core flat and round FTTH drop cable, The material can be LSZH, PVC and PE. 2.Features for Indoor And Outdoor FTTH Flat Drop Fiber Optic Cable Extrusion Sheathing Machine: High configuration, the whole machine use IPC+PLC control system, low energy consumption of the equipment, a large quantity of extrusion, high production efficiency, high gloss surface, small temperature difference, low noise, good stability, strong continuity of working, convenient operation, long service life. 3.Technical parameters of Indoor And Outdoor FTTH Flat Drop Fiber Optic Cable Extrusion Sheathing Machine : No Item Paramters 1 S , tructure Speed 190m/min 2 Production Speed ≥ 120m/min 3 Optical fiber bobbin size Φ236 x Φ160 x Φ108 or Φ300 x Φ160 xΦ250 4 Optical fiber tension 0.5~3N (adjustable) 5 Take-up tension 5~20N (adjustable) 6 Take-up bobbin size PN400-PN 630mm 7 Length of line 26m 8 Central height of line 1000mm 9 Power 50KW

This bag making machine is specially for various of bag,such as diaper bag,hand holding bag,soft loop handle drawing bag and so on. The machine main control center adopts PLC and touch screen to display bag making speed,bag making length setting and automatic bag making counting. The machine is equipped with 2 sets of punching frame devices and 2 sets of photoelectric frame devices. Only use this multifunction bag making machine to produce what you exactly want.Not only it can save labor but also improve your project. Main technical Parameters Material LDPE,HDPE,etc. Unwinding Width within 1580mm Unwinding Diameter within 800mm Machine Speed 80pcs/min Bag Width within 600mm Bag Length within 550mm Bag Speed 300-400m 60-65pcs/min Power Supply 380V50Hz Total Power 20KW Machine Weight 4500KG

Speed Regulation Movable Cement Grouting Machine Manual Flow Stability Cement Grouting Machine Manual Features of Cement Grouting Machine Manual: 1. Maintenance downtime: When the grouting pump is not used for a short or long term, the pump head should be disassembled, cleaned and brushed with antirust liquid or grease before reassembly for later use. 2. Disassembly and installation method: Remove the four fastening bolts connected with the pump head and the cylinder, and remove the material cylinder and the inlet and outlet of the slurry. Remove the connecting bolts between the inlet and outlet of the slurry and the pump head respectively, and take out the steel ball, sealing gasket and the "O" rubber ring for end face sealing. Clean up the removed parts in time, and install them in reverse according to the above method after rust-proof treatment. Please pay attention not to damage the seals when disassembling. Model SYB Cylinder diameter 80mm Motor power 11kw Grouting capacity 27-100 L/MIN Outlet pressure 5-8Mpa Outlet diameter 19mm Inlet diameter 25mm Cylinder number 2 Particle diameter size ≤5mm Suction Height 2.5m Weight 490kg

Model No. ZKGL-80-12 Aluminum tube size (mm) Chamber size (mm) O.D.80*1000 Length 300mm Power supply 220V/4KW Max. temperature 1200 ℃ Continuous temp. 1100℃ Heating rate ≤ 25℃/min ( suggest 15℃/min for longer life using of furnace ) Accessories One pair of high temperature furnace gloves; One piece of furnace hook One set of Stainless Steel Vacuum Sealing Flange Kit Optional devices Paperless recorder Quartz Boat Vacuum Pump 1. Furnace material is high-purity alumina ceramic fiber materials, new assembly structure, no transformation in long term high temperature, sturdy and durable 2. Vertical or horizontal operation freely adjustable; working height freely adjustable, 3. Operation also possible separate from stand if safety guidelines are observed 4. Control system integrated in furnace base 5. Defined application within the constraints of the operating instructions 6. The heating element is made of high-quality alloy wire, which can bear large load, stable and long service life 7. The furnace tube adopts quartz tube as carrier and the stainless steel flanges on its both ends are simple design, reasonable, easy to disassemble and convenient for entering and leaving sintered samples

Hydro turbine generator is droved directly or indirectly by hydro turbine. The rotating speed is less than 1500r/min, with horizontal and vertical arrangement. Excitation mode with brushless and static silicon type. Components including stator, rotor, base frame, bearing, excitation motor or collecting ring. The outlet voltage from 400V to 13.8KV, and frequency could be 50Hz or 60Hz, output from 50Kw to 50Mw. Our generator are high efficiency, reliable, manufacture and tests all follow related IEC standards. Place of Origin: Sichuan, China Brand Name: Customized Warranty: 1 year Application: Hydropower Plant Certificate: ISO9001 Lifetime 35 years Main Features 1) Simple structure ,easy in installation and maintation. 2) Adopting high quality material with high efficiency. 3) Optional color ,type and material. 4) Professinal advice to the most suitable generator according to the station parameter. 5) Long lifespanof 30----50 years.

Computer plate making machine, appearance size: 1400*1200*1150, processor size: 1200*1100*1150. Basic parameters of the host: maximum output size: 1130*920, minimum output size: 400*350. According to the maximum output size, it can reach 24 plates per hour, accurate and clear. Imported V6 laser is used. Parameter settings of the processor, temperature: 23-25 degrees Celsius, flushing time: 22-26 seconds. Make an appropriate adjustment according to the time of use of the chemical. The machine uses a standard 220V voltage, the room needs about 30 square meters, keep the room dry, and a constant temperature of 22 degrees Celsius. Model Thermal UV T824 T832 T848 T864 T8128 U824 U832 U848 U864 U8128 NO.of lasers 24 32 48 64 128 24 32 48 64 128 Throughput(1130*800) 13 18 23 28 45 13 18 23 28 45 Max.Min.Format MAX:1160*940 MIN:400*350 MAX:1160*940 MIN:400*350 Laser source 830nm 405nm Resoiution 2400DPI Loading system Automatic,Semi-Auto(Optional Auto-loader) Plate requirement CD. 0.15-0.4 (Thermal plate) CD. 0.15-0.4 UV plate Interface 1-bit Tiff interface and direct workflow driver,support CIP3/CIP4 Power AC220V,50-60HZ 5.5KVA Work environment Temperature:20-25℃,Humility:40%-80%

PP strap production line /PP strap manufacturing machine, PP strap making machine PP strap with width from 5mm to 19mm can be manufactured by our PP strap manufacturing machine. we furnish PP strap production machines with 1, 2, 4 and 6 PP straps extruded. NO. Component Feature1 Feature2 1 Drying dehumidifacation crystalization system Energy efficiency Feeding devices Self-adjustment of the system Rapidity in production shift Optimal and continuous mixing of the material No risk of contamination 2 The three components mixing and feeding unit Automatic Increase IV With automatic ratio mixing system for raw-material additives Use-100% bottle flakes 3 extruder Sevo-extruder can save electric 30% Low tempreture plastify High efficiency screw No deformation at high temperature 4 Back-flush screen changer Continuous Back-flush screen changer make the produce non-stop Full automatic self-cleaning optimal design of the melt flow way - short melt residence time low pressure build up - to prevent thermal variations of the melt no dead spots for fast changes of material or color operational reliability and long durability 5 Melt measuring pump world's leading elastomer extrusion pumps over 100 years experience Protect extrusion equipment reduce energy consumption Provide accurate system pressure for the mold Continuously obtain stable product quality 6 Cooling tank Stainless steel/Lifting tension/ water removal system to maintain tension 7 Stretching machine Frequency control mold tempreture machine control roller surface tempreture 8 stretching oven High-performance insulation layer save energy Maintain the constant tempreture of the strap 9 Embossing device High-precision make strap with goof friction Ensure the accuracy and consistency of strap pattern Enhance the friction for strap Enhance the strength for strap Unique technology World leading high precision standards 10 winder Sevo-motor controls winder dispalcement width and distance Increase the value of strap Manual control or computer control is optional Servo wiring is set by computer according to strap specifications Automatically adjust the winding tension The winding curve of the strap reel is perfect

Laser cutting machine introduction Laser cutting machine is a new type of metal processing thermal cutting machine. It uses working gas and high-speed and high-temperature plasma arc as a heat source to partially melt the metal, and uses high-speed airflow to blow away the molten metal while forming a narrow plasma cutting seam. The tool is used to cut various metals, such as carbon steel, stainless steel, copper, aluminum, cast iron, etc. It not only has the advantages of narrow cutting seam, fast cutting speed, small heat-affected zone, smooth cutting, small deformation of the workpiece, simple operation, etc., but also has significant advantages and energy-saving effects. It is suitable for all kinds of machinery, metal structure manufacturing, repair and installation services, sheet metal manufacturing, drilling, excavation and repair, chamfering and more metal cutting projects and plans. Parameter information Machine Model RG-30120 RG-40120 RG- 45150 RG-45200 Working Area 3000x12000mm 4000x12000mm 4500X15000mm 4500x20000mm Laser Power 3000- 20000W Max Linkage Velocity 100m/min Z Travel 150mm Positioning Accuracy ±0.03mm Repeat Positioning Accuracy ±0.02mm Max Acceleration 0.8G

MTBF (interval time between equipment failures) ≥300 hours/time; MTTR (maintenance time for equipment failures) ≤2 hours/time; PVB zui large roll diameter: 500mm; unilateral reserved 10mm for fine cutting; membrane fine cutting accuracy: ±0.5mm; membrane placement accuracy: ±0.5mm; PVB material change time: 3-4min; production capacity: 60 pieces/h.

The automated packaging and palletizing system consists of automatic bag feeding system, automatic weighing and packaging system, automatic sewing machine, conveyor, bag reversing mechanism, weight re-checker, metal detector, rejecting machine, pressing and shaping machine, inkjet printer, industrial robot, automatic pallet library, PLC control system and other equipment, which can complete automatic quantitative packaging and palletizing process for granular materials, powder materials. The automatic line is available for woven bags, PE bags, paper-plastic composite packaging bags, all-paper packaging bags, all-plastic packaging bags and open or valve port packaging bags. It is widely used in food, chemicals, engineering plastics, fertilizer, building materials, pigments, minerals industries. The automatic line has high packaging accuracy, no dust pollution, high degree of automation, and max. palletizing speed of up to 1000 bag / Hour or more.

Specifications Manufacturer Bitmain Model Antminer L7 Release November 2021 Size 370*195.5*290 mm Weight 16.5kg Net Weight 15kg Fan(s) 4 Power 3425W Noise Level 75db Interface Ethernet Temperature 5 - 45℃ Humidity 5 - 95 %

Product Description: This machine consists of two automatic devices, a winding device using PE film and a cutting device which can set the length. It can realize the functions of only wrapping without cutting, mixed cutting, film breaking detection, cutting arbitrary length, automatic detection of tow length, wire collection, one- button recovery, arbitrary adjustment of film density, and termination of protection. Parameter: Item name brand Packaging length 1100mm(customizable) Bundle diameter range Ф40-Ф900mm Wrapping material PE Wrapping film width 40-100mm Motor power 0.5KW Power supply 280V/24V Size 850×1050×3 , 600mm

Introduce of Automatic Stone Cutting Machine for Marble Granite This machine adopts PLC programmable control system, man-machine integration of touch screen operation interface, with high precision rotary encoder and the infrared liner, cutting left and right adopts the frequency converter to control the speed, speed can be adjusted according to the stone material, lift up and down adopts hydraulic, the high speed moving parts adopt imported high quality spare parts, so it cutting with high efficiency, high cutting precision, high stability, easy and flexible operation etc, especially suitable for the high value of large specifications of granite, marble slabs cutting. Machine Specifications YPE MCQJ-450 Blade diameter mm Φ350-Φ500 Max.working dimensions(LxWxH) mm 3200x3200x100 Table size(LxW) mm 3200x2000 Workbench tilting degree n° 0°-85° Workbench rotating degree n° 0°-90°+45°/0°-45°-90°-360° Main motor power kw 15 Gross power kw 20.2 Water consumption m3/h 3.5 Trolley dimension(LxWxH) mm 6000x5000x2600 The total weight kg 5200

Description: The most common metalworking fluid is emulsion. The emulsion is made by mixing the concentrate into water, not the other way around. The concentrate consists of mineral oil and possible synthetic esters as well as emulsifiers and other additives. When the concentrate is mixed with water, a milky white emulsion is formed. Depending on the process and metal, the concentrate is mixed into different concentrations. This type of product can range from technically relatively simple formulas to highly complex formulas. store: Store at room temperature, avoid mixing sundries and other oils Avoid direct sunlight Avoid contact with strong oxidants, strong acids and strong bases If frozen at low temperature, it can be used after being completely dissolved in an environment of 20℃ without affecting the use effect The darkening of the appearance of some products after long-term storage does not affect its use effect Item Reference Data Testing Method Appearance light yellow to reddish brown transparent liquid visual inspection Open flash point℃ >180 GB/T267-1988 Density (15℃) 0.880~0.910 GB/T1884 Copper sheet corrosion 100℃1hr level 4 GB/T5096-85 Viscosity 40℃ 10-13 GB/T256-1988 *Typical data of the above data products, please refer to product inspection standards for quality indicators