Machine Tools Parts

Excavator R210-7 Final Drive Motor TM40 Product Description The R210-7 Final Drive Motor with Gearbox (TM40) is an impressive and powerful motor that is capable of delivering exceptional performance in a wide variety of applications. This motor is commonly used in mining and construction equipment, as well as in agricultural and forestry machinery. It is also suitable for marine and industrial applications such as winches, pumps and compressors. Model: TM40  Category: Travel Motor Condition: Original new&Original new MOQ: 1 piece Production Capacity: 1000pcs /Month Standard or Nonstandard: Standard Guarantee:  We will check the Engine assy and send detail pictures to buyer to confirm before shipping. 

PC78 PC88 Komatsu Excavator Hydraulic Pump Product Description The Komatsu PC78 and PC88 excavator hydraulic pump is one of the most efficient, cost-effective and reliable hydraulic pumps on the market today. This rugged and reliable pump is designed to provide maximum performance in the toughest of applications and can handle a wide range of pressures and speeds. Model:PC78 PC88 Category: hydraulic pump  Condition: Original new&Original new MOQ: 1 piece Production Capacity: 1000pcs /Month Standard or Nonstandard: Standard Guarantee:  We will check the Engine assy and send detail pictures to buyer to confirm before shipping. 

Name: Lower Die Guide holder Roller Block SET Item No.: MBA851SET Size: standard Accuracy: +/-0.002mm Usage: Spare parts for Mitisubishi machine

Minimum Order: 100

Name: Sodick Filter Item No.: T-L-SF23N Size: 260×46×280H Filter Fineness:5m Pressure:External Compatible Machine models:A350,A350S,A350W,A350SSW, A500,A500W,Aft , er87.7AW(330, 453,653)F275WITH WATER APPLICATION 87.7AP(150,200, 300,330,450,550)87.7EPOC (30 , 0,500,600,800,1100) Package:2pcs/carton Pack , ing Carton Size: 59*31*36cm

Minimum Order: 500

Name: Sodick Power Feed Contact Item No: T-L-PFCS010 Size: 5*40*20mm Suitable for Wire EDM types: AQ.A.EPOC Series, AP200~AP550, PGW200, EXC100, BF.JL Series Original No:3085936(3084592)

Minimum Order: 200

Name: Sodick Wire Guide(Sapphire) Item No: T-L-WGS101 Size: 0.21mm；(Option: 0.26mm) Suitable for Wire EDM types: AQ.A.EPOC Series, AP200-AP550,PGW200, EXC100,BF.JL series; Original No:3080047

Minimum Order: 100

Name: Pulley Item No.: T-W-P（30） Description: Diameter: 30mm Usage: for the Mo wire cut EDM machines

Minimum Order: 100

Name: Coated EDM Wire(High Speed) Hard type Item No: T-L-CZ-H Description: 1. High speed coated EDM wire. 2. Suitable for high cuttting speed processing and especially for difficult to processing materials, such as tungsten, graphite, ect . 3. High straightness, suitable for auto threading machines. 4. Higher processsing precision. 5. Cutting speed: 20% higher than the brass wire. Item No Diameter (mm) Core Coating Tensile Strength Elongation Color T-L-CZ-H 0.15-0.30 CuZn37 Multi CuZn More than 900MPa More than 20% IACS Gloden Grey T-L-CZ-S 0.15-0.30 CuZn37 Multi CuZn More than 450MPA More than 22% IACS Gloden Grey Usage: for most of production efficiency preferred wire EDM machines.

Minimum Order: 100

Name: Guiding pulley unit Item No: T-W-GPU Description: Single side Usage: to guide the wire for the Moly wire EDM machines

Minimum Order: 100

Name: Limited Switch Item No: T-W-LS Description: X/Y axis travel limited switch Usage: for the Mo wire cut EDM machines

Minimum Order: 100

The product range is from ø100mm- ø5000mm,including more than 3000 types. The main type includes Single-row ball, Double-row ball, Single-row cross-roller, Tri-roller etc. Slewing Ring is widely used in construction machines, engineering machines, harbor machines, metallurgical machines, light industrial machines, wind generators, medical treatment CT machines etc. The product export to US, Russia, Italy, French, German, Japan, South Asian.The company has achieved GJB9001B-2009 quality management system, ISO9001:2008 quality management system, ISO14001:2004 environment management system and OHSAS18001:1999 occupational health and safety ,  management system certification.

Minimum Order: 1 bags

PRODUCT DESCRIPTION NMFIRE 500 GPM Electric Motor Driven Split Case Fire Pump Fire pumps are used to supply water for automatic sprinkler systems, standpipes or fire hydrants. NMFIRE Split case are pumps are rated 300, 450, 500, 750, 1000, 1250, 1500, 2000, 3000, 3500, 4000, 4500, 5000, 5500, 6000, 6500, 7000, 7500 and 8000 GPM. All fire pumps are rated at 40 pounds per square inch or more of boost. Fire Pumps of the type described shall meet the following basic requirements: 1. Each pump is to be tested hydrostatically for not less than 5 miniutes. The test pressure is to be not less than 1.5 times the max. working pressure of the pump, but in no case less than 250 psi (1724 kpa). 2. A pump shall develop not less than 65 percent of rated total head when discharging at 1.5 times rated capacity. The maximum net pressure for a fire pump shall not exceed 140 percent of rated head. 3. The maximum pump brake horsepower shall not exceed the HP rating its driver, including service factor. NMFIRE 500 GPM Electric Motor Driven Split Case Fire Pump UL FM 0 ELECTRIC MOTORS: NFPA 20 requires all fire pump motor drivers to be rated for continuous duty and sahll not be used at voltages in excess of 110% of rated voltage. At rated voltage and frequency, the full load ampere rating shall not be exceed (excepts as allowed by the service factor on motor nameplate) under any pumping condition. MOTOR CONTROLLERS: The motor control panel equipment shall be factory assembled, wired, tested, and spcifically approved for fire pump service. Combined manual and automatic type to incorporate the following: a. Isolating switch b. Externally operable, quick breaking disconnect c. Time delay locked motor over current protection set at 600% of motor full load current for 20 seconds. d. Pressure switch with high and low pressure setting e. Motor starter of the magnetic type f. Pilot lamp to indicate circuit breaker closed and power available g. Phase revversal visible indicator pilop lamp.

Sycotec Kavo 4026AC Spindle Motor for PCB Cut Machine​ Description: SYCOTEC KAVO Spindle Motor Part No: 4025HY 4026HY Condition: Original new /Copy new Product Tags: 4026AC Payment Term: T/T, Paypal, Westernunion are all allowed. Shipping Ways: DHL, FedEx, TNT, UPS,by Sea Lead time: in stock! PCB Cut Machine Sycotec Kavo 4026AC Spindle Motor OEM In stock 0PCB Cut Machine Sycotec Kavo 4026AC Spindle Motor OEM In stock 1 The responsibility of our enterprise: 1. We have always been adhering to the "quality of survival, quality tree brand, quality and efficiency, quality to promote development" quality policy 2. We always adhere to the premise of ensuring the quality of customer production, reduce customer production costs. 3. Unremittingly to the needs of our customers for the direction of our work. Our business scope: 1. Nozzles, Feeders, Feeder Parts, cutters, filters, belts, motors, valves, sensors, camera, board cards and other machine parts... 2. Feeder Calibration Jigs, Feeder Storage Carts, IC Tray feeders, Stick feeders, Feeder Loading Unit, 3. Printer squeegee holder/blade, Clamp foil and other Printer Parts. 4. ESD splice tape, tool, stencil clean wiper/paper, PCB Magazine... 5. SMT Peripheral equipment (PCB Separator, Solder paste mixer, Automatic SMD Chip Counter, etc... ) 6. SMT product recycling (feeder nozzle used machine...) Terms of Payment: T/T, PayPal, Western Union Our Advantages: High quality and low cost. Original new and copy new all available. Ship to worldwide. 10 years trading experience. Various brands available. Special type is available.

300-450 Bpm Hydraulic Demolition Hammer Excavator Concrete Breaker Hammer Attachments Fit Lovol FR360​ jisan hydraulic breaker 2022.pdf Description 1. High Strength and wear resistance steel plate adopted for main parts. 2. Compatible with various brands of excavator and backhoe loader. 3. Well heat treatment for through bolt and cylinder, protecting hydraulic breaker from fracture damage. 4. Unique valve system. JISAN hydraulic breakers adopt simple hydraulic circuit system, which reduce oil consumption and improve working efficiency. 5. First-class quality. Introduce processing equipments and main body producer technician from Korean to guarantee the quality. 6. Powerful stroke. Compared with other brand's products, JISAN breaker has more powerful stroke and reliable performance. 300-450 Bpm Hydraulic Demolition Hammer Excavator Concrete Breaker Hammer Attachments Fit Lovol FR360 0