Machine Tools Parts

Last month, one of our old customers in Brazil placed their mass production order for E-SV12-20, a solenoid-operated, 2 way, normally closed, poppet-type, screw-in hydraulic cartridge valve equivalent to HydraForce SV12-20. Today, we received email from this customer that they would also like to order the normally open type one with us, E-SV12-21. Per customer, the normally closed one E-SV12-20 has passed their testing without any problem, they believe that this normally open one will also work very well. Due to urgent needs, they will place the order directly without testing prior to mass production. This is not the first time that old customers place mass production order with us without testing. AAK’s stable quality helps customers save a lot of time and cost from testing. AAK hydraulic solenoid cartridge valve 2 advantages: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SV12-21 Hydraulic Solenoid Cartridge Valve: Max. Operating Pressure: 240 bar (3500 psi) Flow: 114 lpm (30 gpm) Internal Leakage: 3 drops/min max. at 240 bar (3500 psi) Operating Fluid Temperature: - 40°C ~ 120°C (with Standard Buna N seals) Cavity: VC12-2 AAK E-SV12-21 Hydraulic solenoid cartridge valve, benchmarking HydraForce SV12- 21, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC VALVES (820) 2024-10-28

Minimum Order: 1 bags

Single row cylindrical roller bearings are designed to withstand heavy radial loads and high speed applications. The outer ring of the NU bearing has integral flanges on both sides and the inner ring has no flanges, allowing bidirectional axial displacement. An important feature is the separable design, which facilitates the installation and the individual parts of the bearing are interchangeable. The radial load-bearing capacity is high Low friction Long service life It can withstand bidirectional axial displacement Separable design size Inner diameter 170 mm Outer diameter 260 mm Width 42 mm

Radial contact ball bearings with sealed or shielded caps are designed to accommodate radial loads in a single direction and some axial loads. A bearing series is based on a single cross-section that remains constant as the bore diameter increases, resulting in significant space and weight savings. Bearings are available in both metric and imperial boundary sizes. Depending on the design and series, bearings can be chemically and corrosion-resistant. Withstands bi-directional radial and some axial loads Thin cross-section light Low friction High hardness High running accuracy size Inner diameter 635 mm Outer diameter 685.8 mm Width 25.4 mm Radial cross-section 25.4 mm

Unidirectional thrust ball bearings can accommodate axial loads in a single direction. It cannot withstand any radial load. Its parts are separable, making it easy to install and dismantle as well as for maintenance checks. Most parts are interchangeable. The inner bore of the shaft washer is ground to achieve an interference fit with the shaft. The separable design facilitates installation and dismantling as well as maintenance checks Replaceable parts The inner bore of the shaft washer is ground to achieve an interference fit with the shaft size Inner diameter 120 mm Outer diameter 170 mm Thickness 39 mm performance The basic dynamic load rating is 127 kN The basic static load rating is 390 kN The reference speed is 1 600 r/min

Two paired ultra-precision, high-speed, E-type design with single column angle contact ball bearings and seals The two ultra-precise, high-speed E-designed, sealed paired single-angle contact ball bearings can be used in a variety of configurations. Compared to the same SKFB design high speed bearing, it has slightly higher speed capacity and can withstand higher loads. The operation accuracy is very high Can withstand a very high rotational speed Contact seal The bedded seal extends the service life of bearings Bearings Size d 45 mm bore diameter D 75 mm outer diameter B 32 mm width

SKF 6238M ball bearing - the ultimate choice for demanding heavy-load applications. Precision engineered and made with advanced materials, this top- of-the-line bearing delivers unmatched performance and durability. Built to withstand even the most challenging industrial and commercial settings, investing in the SKF 6238M will make a significant difference in your operations. Features: - Advanced materials for superior durability and performance - Precision-engineered for accuracy and reliability - Can handle heavy loads with ease - Suitable for use in industrial and commercial settings - Long-lasting and dependable performance

Recently, we received the repeat order from a customer in the United States for a hydraulic solenoid cartridge valve equivalent to Hydraforce SV08-20 again. It is a solenoid-operated, 2-way, normally closed, poppet-type, screw in hydraulic cartridge valve, with standard and manual override options. This valve is intended as a blocking or load holding device for low flow circuits having pull-only manual override requirements for handles or cable linkage. This is a standard part and commonly used. Till now, AAK hydraulic solenoid cartridge valve E-SV08-20 has been shipped to several customers in the United States. Its quality and stability has been approved by these customers. Some of them repeat the orders 2 – 3 times a year. The advantages of AAK Hydraulic Solenoid Cartridge Valve E-SV08-20 are: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SV08-20 Hydraulic Solenoid Cartridge Valve: Pressure Rating: 207 bar (3000 psi) Flow Rating: 23 lpm (6 gpm) Max.Internal Leakage: 0.15 ml/min (3 drops/min) max. at 207 bar (3000 psi) Temperature: - 40 ℃ ~ + 120 ℃ with Buna N seals Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus) Cavity: VC08-2 AAK E-SV08-20 Hydraulic Solenoid Cartridge Valve, benchmarking HydraForce SV08- 20, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC CARTRIDGE VALVES (818) 2024-10-14

Minimum Order: 1 bags

Recently, we received inquiries from several foreign customers for our Hydraulic Pilot Operated Check Valve E-DC08-40. It is a cartridge style, dual pilot operated check valve for use in blocking or load holding circuits with general purpose hydraulic fluids. Its flow rating, operating pressure, function and performance is completely equivalent to HydraForce DC08-40, and it is also a substitute of Parker CPD084P. Till now, AAK valve E-DC08-40 has been shipped to customers in Sweden, Germany and Mexico. Its quality and stability has been approved by these customers. The advantages of AAK Hydraulic Pilot Operated Check Valve E-DC08-40 are: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-DC08-40 Hydraulic Pilot Operated Check Valve: Operating Pressure (Inlet): 240 bar (3500 psi) Rated Flow (Inlet): 19 lpm (5 gpm) Pilot Ratio: 3:1 Check Spring Bias: 1.7 bar (25 psi) Leakage: 0.25 ml/min (5 drops/min) max. at 207 bar (3000 psi) Temperature: - 40 ℃ ~ + 120 ℃ with Buna N seals Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus) Cavity: VC08-4 AAK E-DC08-40 Hydraulic Pilot Operated Check Valve, benchmarking HydraForce DC08-40, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC CARTRIDGE VALVES (817) 2024-10-07

Minimum Order: 1 bags

4 months ago in May, we shipped a 2 pcs of test order for a pilot operated relief valve equivalent to HydraForce RV10-28 to a new customer in Turkey. It is a screw-in, cartridge style, pilot operated, relief valve with reverse free flow check valve, intended for use as a pressure limiting device in demanding hydraulic circuits which require fast response, low hysteresis, low leakage, low pressure override and reverse free flow features. This customer tried another hydraulic cartridge valve manufacturer in Ningbo China 1 year ago, but failed due to quality, then they placed the 2 pcs of trial order with AAK this May in despite of AAK price is 15% higher. Last Friday, we were advised by customer that AAK samples passed testing and have been performing very well, and received their mass production order for 500 pcs. The advantages of AAK Hydraulic Pilot Operated Relief Valve E-RV10-28 are: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-RV10-28 Hydraulic Pilot Operated Relief Valve: Max. Operating Pressure: 240 bar (3500 psi) Capacity: 113 lpm (30 gpm) Max. Internal Leakage: 0.50 ml/min (10 drops/min) max. at to 80% of nominal setting Cavity: VC10-2 AAK E-RV10-28 Hydraulic Pilot Operated Relief Valve, benchmarking HydraForce RV10-28, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC CARTRIDGE VALVES (816) 2024-09-30

Minimum Order: 1 bags

GrandMfg® Aluminum Oil level sight glass window indicator plugs Material Body: Aluminum 6061 T6/Aluminum 6063 Finish: aluminum natural and aluminum oxidized color/ Anodizing color. Seal: Viton/FKM/FPM,NBR, Aramid gasket,Teflon and Copper seal Glass Thickness: 2mm to 8 mm Reflectors: Stainless Steel 304 Reflector (Any type you can chose with reflector or without Reflector, You also can add float ball.) Glass Type: Natural Glass,Tempered Glass and Borosilicate Glass Resist Tempreature Range:-40'C to 180'C (Different seal have diferent temperature range) Pressure Range: 5-50 Bar(0.5MPa to 5 MPa). Thread type:NPT,NPTF,UNC,UNF,UNEF,Metric and BSP(G thread) Size： Below you will get the size you wanted.Another size is okay.OEM are welcome. Application:Air Pump,Receivers,Reservoir Coolant Tank,HydraulicTanks,Gearboxes,Speed Reducer,Gear unit,Compressor,blower and Power Transimission.

Minimum Order: 200

In the past two years, we shipped a hydraulic piloted directional valve equivalent to HydraForce PD10-41 to customers in the United States and Russia. With stable quality, competitive price, efficient communication and on time delivery, AAK left them with a safe and reliable impression. They have been buying them from AAK regularly year by year. Now, we have another new customer in Mexico who is going to place the annual order with us. This is a screw-in, cartridge style, pilot operated, spool-type hydraulic directional valve, and have below two advantages: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-PD10-41 Hydraulic Piloted Directional Valve: Max. Operating Pressure: 240 bar (3500 psi) Flow: 30 lpm (8 gpm) Internal Leakage: 82 ml/min (5 in³/min )Note: At from port 1 to 2 or port 2 to 3; zero leakage from port 1 to 2 with sealed spool 207 bar (3000 psi). Operating Fluid Temperature: - 40°C ~ 120°C (with Standard Buna N seals) Cavity: VC10-4 AAK E-PD10-41 Hydraulic cartridge piloted directional valve, benchmarking HydraForce PD10-41, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC VALVES (815) 2024-09-23

Minimum Order: 1 bags

Last March, we launched a hydraulic cartridge check valve equivalent to HydraForce standard part CV16-20. It is a screw-in, cartridge style, hydraulic check valve for use as a blocking or load-holding device. This hydraulic cartridge check valve is commonly used. Many hydraulic cartridge valve manufacturers in Ningbo China are producing it. A Mexican customer bought samples from 3 hydraulic cartridge valve manufacturers in Ningbo last May. After testing the samples, they placed the first order with AAK last August. Per customer, if AAK shipment performs very well, they will buy this model from AAK year by year. Last Monday, we received the re-peat order from this Mexican for E-CV16-20. AAK hydraulic cartridge check valve 2 advantages: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-CV16-20 Hydraulic Cartridge Check Valve: Max. Operating Pressure: 240 bar (3500 psi) Flow: 151 lpm (40 gpm) Internal Leakage: 5 drops/min max. at 240 bar (3500 psi) Operating Fluid Temperature: - 40°C ~ 120°C (with Standard Buna N seals) Cavity: VC16-2 AAK E-CV16-20 Hydraulic cartridge check valve, benchmarking HydraForce CV16-20, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC VALVES (814) 2024-09-18

Minimum Order: 1 bags

Drive pulley also called Head Pulley, it is the main part for transmitting the power. As per the different carrying capacities, The driving pulley can be divided into three categories: light duty, medium duty and heavy duty. And for the same diameter of the pulley, there are many different axle diameters and central spans. Joyroll pulleys using international standard design and manufacturing technology, we can produce Drive/head pulley, tail pulley, snub pulley, bend pulley and take-up pulley. THE LAGGING OF A HEAD PULLEY. Pulley laggings use on a variety of pulleys that provides a cost-effective and most effective solution to correct a belt slippage, increase friction and prevent material build-up, along with additional long term system benefits. Joyroll’s laggings with rubber or ceramic tiles embeddedinto rubber afford excellent grip between belt and pulley lagging in both directions; what’s more, ceramic pulley lagging provides the solution that conventional rubber lagging fails to correct a belt slippage and/or lagging wears prematurely. Head Drive Pulley FEATURES Reducing energy consumption Increasing productivity High coefficient of friction Improving belt traction Eliminating belt slippage No residue on pulley Increasing belt and pulley life Minimizing system downtime Reducing wear from abrasive materials.

Offset trough idlers is a kind of conveying idlers commonly used in belt conveyor. It is designed to be positioned slightly offset, usually to one side, to create a trough shape. This offset helps to guide and center the belt, preventing it from going off track and improving the overall stability of the belt. Offset trough idlers are often used in applications where the belt needs to handle bulk material or where the belt may encounter uneven loading conditions. Features: Offset roll design eliminates roll gap. Offset can improve belt tracking and alignment. High-Quality Bearings and Low Rolling Resistance. Idler frame painted by hot-dip galvanizing or powder coating. Suit for belt width 450mm-1200mm. Belt Conveyor Idler Application: Mining, Steel mill, Cement plant, Power plant, Chemical Plant, Sea Port, Storage, etc