Other Machinery & Parts

We offer double eccentric butterfly valves in DN200-2800 designed with durability in focus. The tilted and firmly secured disc, the optimised seal design and the corrosion protected shaft end zones are all features that exceed the market standards. Longer service life due to tilted disc The tension on the disc is released after a few degrees of opening which minimises wear of the disc seal. Furthermore, the design minimises the compression of the sealing which ensures low operating torques. Eccentric Butterfly Valve Applications Our KXC double eccentric butterfly valves are well suited for water supply applications.

Flange Butterfly Valve description Low head loss. Vulcanized seat that avoids the contact between fluid and cast iron, avoiding corrosion and damages. 100% water tight. Bidirectional flow. Polished disc borders to avoid damage in the seat. No gaskets needed for installation. Working temperature between -10ºC and 90ºC. KXC Double flange butterfly valve used for regulation and flow sectioning in water supply facilities, plumbing, irrigation, etc. It has low head loss due to a hydrodynamic design of the disc, it is 100% water tight and need no gaskets to be installed.

butterfly valves range in sizes from DN 40 (40 mm) to DN 2000 (2 metres) and pressure ratings vary from PN 10 (10 bar) to PN 40 (40 bar). Stocked butterfly valves are available in a variety of materials such as cast iron, ductile iron with approved epoxy coating, stainless steel, PVC and FIP thermoplastics. KXC provide riser extensions, gearboxes & automated valves with either electric or pneumatic actuators to order to suit our butterfly valves, in a fast turn-a- round time. Buried service option is available on request . Refer to the appropriate data sheet for full details on KXC Flange butterfly valves. Flange Butterfly Valve Specifications: Size: DN50-DN400 Pressure: PN10/PN16 Standard: ISO5211, DIN2501 PN10/PN16, DIN3202

KXC Butterfly valve consist of a disk which forms a seal against an elastomer or metallic seal. The disc rotates inside the body thereby restricting or allowing the flow. Butterfly valves are very versatile. It can be used for manual or process control, throttling on/off of liquids or gases. They are often used because of their shot take-outs and lower costs Lug type butter fly valve is usually used where the valve is at the end of a pipe since there will be no 2nd flange to secure the studs. Instead, lugs are cast on the valve with tapped holes which matches the bolt pattern for the size and pressure classification of the flange. Bolts are passed through the flange holes and are threaded into tapped holes of the lug

Wafer Butterfly Valve KXC Butterfly Valves are used for isolating and regulating flow. The closing mechanism is a disc that allows for quick shut off, much like a ball valve. Butterfly valves are light in weight so they require less support. Unlike the ball valve, the disc is always present within the flow, therefore a pressure drop is always induced during flow, regardless of valve position. The disc is typically rotated a quarter turn when the valve is fully opened, but the valve may also be opened incrementally in order to throttle flow. Wafer Type Butterfly Valve Wafer type ball valves fit between two flanges, with studs passing from one flange through other. The valve is held in place and sealed with gasket by the tension of suds. These are considered low cost butter fly valves.

Our range of KXC metal seat gate valves are cast in foot design for stability and safe and easy storage with fixed lifting devices for simple installation. Metal Seat Gate Valve Specifications: Size: DN80-DN800 Pressure: PN10/PN16 Standard: EN593, DIN 2501 PN6/10/16, DIN3202 F4 Materials: Body : Cast Iron Seal : Cast Iron+brass Stem : Stainless Steel 304

Cast Steel Gate Valve Specifications: Size: DN40-DN600 Pressure: PN10/PN16 Standard: EN593, DIN 2501 PN6/10/16, DIN3202 F4 Materials: Body : WCB Metal Seat Gate Valve Seal : WCB+2Cr13stainless steel Stem : 2Cr13stainless steel KXC gate valve that opens by lifting a round or rectangular gate/wedge out of the path of the fluid. The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar. The gate faces can form a wedge shape or they can be parallel. Typical gate valves should never be used for regulating flow, unless they are specifically designed for that purpose. On opening the gate valve, the flow path is enlarged in a highly nonlinear manner with respect to percent of opening.More detail please click here

Resilient seat gate valves for water supply pipelines KXC Resilient seat gate valves are suitable for pipelines transporting drinking, raw or waste water with a temperature no higher than 60°C. The gate valves and the components that come into contact with drinking water comply with standard EN 1074-2 and the drinking water regulations of many countries respectively. Composed of strong and durable ductile iron, resilient seat gate valves operate in two different ways: Resilient seat gate valve Specifications: Size: DN50-DN800 Pressure: PN1.0-1.6MPa Standard: BS5163, BS4504 PN10.PN16/EN 1092

KXC Resilient seat gate valves are gate valves with an elastomer lined wedge. They are especially used for waste water, drinking water supply and irrigation. Gate Valve Specifications: Size: DN40-DN400 Pressure: PN10/PN16 Standard: EN593, DIN 2501 PN6/10/16, DIN3202 F4 Materials: Body :Ductile Iron Seal : Ductile Iron+EPDM(Soft Seated) Stem : Stainless Steel 304 Resilient Seat Gate Valve Characteristic: Medium: Water, Waste Water, Air, Oil Temperature: -20 to 120℃

Technical parameter: Ratio range: basic type 25～4000 Torque range: 2.6～900 kNm Power range: 22～1920 kW 1). P series planetary gear units adopts modular design and can be combined according to customer requirements. It is a new type of reducer with wide versatility. 2). The gear units is driven by involute planetary gears, which make rational use of internal and external meshing and power splitting. 3). All gears are carburized and quenched to obtain high hardness and wear- resistant surface. After heat treatment, all gears are grinded, which reduces noise and improves the efficiency and service life of the whole machine. 4).The planetary gear unitshas the characteristics of light weight, small volume, small transmission ratio range, high efficiency, stable operation, low noise and strong adaptability.

Minimum Order: 100

Detailed Product Description High Light: Industrial Boiler Equipment, Industrial Boiler machine Tubesheet - Dish Head Production Line for Industrial Boiler Description: The machine is used for the processes of edge cutting, beveling, cutting of manhole, hole drilling, dish head tube connecting hole cutting and welding for dish heads. Applications: The machine is used for the processes of edge cutting, beveling, cutting of manhole, hole drilling, dish head tube connecting hole cutting and welding for dish heads.

Blue Color Air Conditioner Heat Exchanger , Gasketed Plate Heat Exchanger OEM ODM Available

PRODUCT DESCRIPTION TK Series Bearing Housing TK6204-152 With Total Seals Long Span Life Bearing Housing Specification TK 6204-89 84 47 47.1 25 45 47.5 TK 6204-108 103 47 47.1 25 45 47.5 TK 6204-133 128 47 47.1 25 45 47.5 TK 6204-159 153 47 47.1 25 45 48 TK 6205-89 84 52 52.1 30 46 48.5 TK 6205-108 103 52 52.1 30 46 49 TK 6205-133 128 52 52.1 30 46 49 TK 6205-159 153 52 52.1 30 46 49 TK 6305-108 103 62 62.1 35 49 52 TK 6305-133 128 62 62.1 35 49 52 TK 6305-159 153 62 62.1 35 49 52 Material: 1*Bearing housing ——SPHC 【100% good quality material】 1* Inner seal ring ——PA6 【High temperature resistance】 1* Female labyrinth seal——POM 【Low water absorbing, high abrasion resistance】 1* Male labyrinth seal——POM 【Low water absorbing, high abrasion resistance】 1* Metal cover seal——SPCC 【High precision】 1* Protective cover——PA6 【High temperature resistance】

Product Description Plastic Electricity Tube Electric Pvc Conduit Pipe Electrical Technical Characteristics: 1. Excellent bending flatness and bending performance: after 90degrees of bending , the gauge can pass under self-weight, andthere is no visible crack after normal temperature bending 2. Excellent impact and compression resistance ( withstanding pressure of above 750N ) 3. Excellent heat resistance 4. Flame retardant and self-extinguishing ( self-extinguishing within 30 seconds ) 5. Excellent electrical insulation performance 6. Preventing damage from rodents and insects Product features Pressure resistance, anti-aging: the use of high-quality improved PVC or PE engineering plastic extrusion, high compressive strength, the normal circumstances do not have to do the foundation or encapsulation, anti-settlement, can replace the steel pipe through the road, corrosion resistance. Life of up to 50 years. Complete specifications, the combination of diverse: product appearance, and the original cement pipes, corrugated pipes and other channels can be free transition, combination, and the corresponding connector, plug,Le belt, special plastic and other accessories, easy construction operations. UPvc Pipes And Fitting Structural innovation, saving management:UPvc Pipes And Fitting pipe structure is compact, less road excavation, only 10% of the cement pipe, effectively save the city underground pipe resources, the road traffic and municipal impact less. Toughness, bending freedom: a 6-meter pipe, bending string up to 1.2 meters above the construction of obstacles or cross the other pipeline can easily avoid. Convenient construction, saving time: the jacket and sub-tube into one, no need to wear a pipe twice to wear cable, to avoid the second sub-tube deformation kink, sort chaos, repeated construction of the trouble;UPvc Pipes And Fitting light weight, Easy handling; smooth inner wall, threading effort. High utilization rate, low cost: set of sheath and tube as a whole, the hole effective space, can be connected after the use of exit off, fuel consumption, less investment. Specification Length Thickness Size super PVC Cold Bending wire tube(Underground available) 3.8m 1.45mm DE16*1.45mm super PVC Cold Bending wire tube(Underground available) 3.8m 1.6mm DE20*1.6mm reinforcement PVC Cold Bending wire tube(Underground available) 3.8m 1.3mm DE16*1.3mm reinforcement PVC Cold Bending wire tube(Underground available) 3.8m 1.5mm DE20*1.5mm normal Cold Bending wire tube 3.8m 1.0mm DE16*1.0mm normal Cold Bending wire tube 3.8m 1.15mm DE20*1.15mm normal Cold Bending wire tube 3.8m 1.35mm DE25*1.35mm PVC wire tube 3.8m 1.0mm DE20*1.0mm Anti Aging UPVC Electrical Conduit Pipe 1.6-1.85mm Thickness 0 Anti Aging UPVC Electrical Conduit Pipe 1.6-1.85mm Thickness 1