Minerals & Metals

Swage-locked Grating is manufactured with optional “I” or rectangular bearing bar. These metal bars are permanently locked to the crossing rods with a swaging process which reshapes the metal rods. Structures and Comparing of Swaged I Bar and Rectangular Bar Gratings: The I-bars are permanently locked to the cross rods (positioned every 2" or 4") by a swaging process. Swage-Locked Rectangular Bar Grating uses the swaging process to permanently lock the cross rods (positioned every 2" or 4") to the rectangular bars. There are mainly two reasons that make Swage-locked I-bar grating more popularly used compared with Rectangular grating. One is I-bar swage-locked is lighter weight and less costly than a rectangular bar grating with the same bar thickness, though I-bars reduce the open spaces of the grating because of the flange width. Second reason is that I-bar swage-locked maintains load ratings, it provides the strength equal to a rectangular bar of the same depth, but at far less weight. Rectangular swage-locked bar grating is available with the cross rods flush with the top of the bearing bars, or with the cross rods near the middle of the bearing bar. These options are available if a specific look is desired.

Also written as Hot dipped galvanized floor grating, Hot dipped galvanised floor grating is a type of steel bar grating made with serrated bar and bearing bars with heavy melt zinc coating protection on the surface, ideal for long term indoor and outdoor services as industrial floor grating and grating stair tread. The Hot-Dip galvanizing applied on grating plates and bars comply with ASTM A 123 / A 123M. General information: The floor gratings we supply are brand new. Warranty period of quality is 12 months from the date of shipment. We will provide a full guarantee on the characteristics of that supplied materials meet all specified technical requirements. Manufacturing Standard Manufacturing standards comply with or equivalent standards as stipulated in contract. Our Factory has official certificate ISO 9001 Quality Standard. We manufacture hot dipped galvanized grating with technical and technological specifications meeting international and or contract requirements: Technical characteristics, type, structure, quality of raw materials shall meet requirements as stipulated in contract. Packing and Delivery Our floor grates are provided with suitable protection and packing to ensure their safe delivery to the Delivery Point in satisfactory condition. The packing is suitable for the onward transportation, unloading, as well as transportation to offshore objectives.

Kingde supplies Standard Grating Panels of various types for fitted in applications. Custom sizes are also available upon request. Highly versatile grating structure is provided in more than fifty standard types and is readily cut or customised to any specific requirement. Flooring and Platform Standard 20mm Steel Grating Panel Platform floor grating is made by welding with flat steel and bars with certain distances. It goes through cutting, opening, edging and other processes. The products enjoy the feature of high strength, light structure, high bearing, convenience for loading and other properties. The hot dipped zinc coating gives the product excellent anti-corrosion.

Aluminum bar grating is a non-rusting and light weight metal structure commonly used as walkways, stair treads, access covers and platforms in construction of reservoirs, plants, ships, barges, also used as metal flooring in breweries, bottling plants, food processing and storage facilities, used as architectural mesh panels for facade, sunshade, air vent and metal cladding. Aluminum grating panels are available in standard or anodized finishes. Aluminum Grating Type: flat bar grates: plain type, plain I type, serrated type, serrated I type; cross bar grating: round type and square twisted type. Swaged Rectangular Aluminum Grating - Most Widely Used Aluminum Grating Swaged rectangular bar grate provides clean, crisp lines and the cross bar is fully locked within the bearing bar, slightly below the top surface. "SGI" Swaged "I-Bar" Aluminum Grating - High Efficient and Skid Resisting Grating This type of aluminum grating carries the same load as 3/16” thick rectangular bar type aluminum grating, but weighs slightly less per square foot. Additionally, the striated top and bottom flanges of the "I" bar provide enhanced skid resistance without the cost of serration. "SGF" Swaged Flush-Top Aluminum Grating - Design Suitable for Pedestrian Traffic Walking Surface Manufactured with a unique, extruded cross bar that is flush with the top surface of the bearing bars after swaging, this aluminum grating provides an enhanced walking surface for areas subject to continuous pedestrian traffic. Aluminum Dovetail Pressure Locked Grating - Architectural Mesh Panels The deep cross bars of the dovetail gratings are popular for architectural applications, to be used as sun shade panels and decorative infill panels, with the deeper cross bar serving as architectural accent. Aluminum Bar Grating Products: 6063-T6 Aluminum Bar Grating Architectural Aluminum Grille Bar Gratings Aluminum Platform Bar Grating Swage-Locked Aluminum Bar Grating Bar Serrated Aluminum Grating Press Lock Aluminum Grating 6063-T6 Aluminum Bar Grating with Dove Tail Press Lock/Dove Tail, Smooth Surface Spacing - 7/16" x 4" Spacing 1" x 3/16" Bearing Bar to Run Parallel to Length 1" x 3/16" Edge Trim Band Grating Set to Cover 125.25" Width x 115" Length Span Supplied at Pieces 36-1/16" Wide x 115" Long 16-13/16" Wide x 115" Long Grating Set to Cover (2 Spans) 91" Width x 119" Length Spans Supplied per Set 36-1/16" Wide x 119" Long 18-9/16" Wide x 119" Long Architectural Aluminum Grille Bar Gratings for Metal Facade and Cladding Panels Features: Light weight-easy to install and clean; Nice appearance-high strength-ventilation and light can pass through; Material saving-slip-resistant and safe; Heavy loading and durable

Shan Dong Lu steel Group Co., Ltd is a professional production of Petroleum steel pipe manufacturer Petroleum steel pipe standard: ASTM, DIN, ISO, EN, JIS, GB, etc. Material: Q235A、Q235B、10#、20#、Q345(16Mn)、L245(B)

Minimum Order: 1 bags

PRODUCT DESCRIPTION 2B Stainless Steel Sheet 304 316 201 Plate/Strip/Pipe,Stainless Steel 304 Coil We can provide cutting , decoiling ,PVC film, surface finish service.You can order stainless steel plates of any size from us! Grade 201/202/301/303/304/304L/316/316L , /321/310S/401/409/410/420J1/420J2/430/439/4 43/ , 444 Surface Finish 2B, BA, NO.1, NO.4, 8K, HL, Embossing, Satin, Mirror, ect Standard JIS/SUS/GB/DIN/ASTM/AISI/EN , Technique Cold Rolled; Hot Rolled Thickness 0.3-4mm cold rolled; 3-16mm hot rolled; 16-100mm hot rolled; Customized according to customer requirements Width 1000mm, 1219mm, 1240mm, 1500mm, 1800mm, 2000mm Length 2000mm, 2438mm, 2500mm, 3000mm, 6000mm or as required Color Golden, Black, Sapphire Blue, Brown, Rose Gold, Bronze, Silver, ect Application Interior/Exterior decoration; Architectur; Evevator; Kitchen; Ceiling; Cabinet; Advertising nameplate; Roof structure; Shipbuilding Lead Time 7-15 working days after the receipt of 30% deposit Payment Terms 30% TT for deposit,70% TT /70% LC at sight balance before shipment

PRODUCT DESCRIPTION 0.5-80mm Customized Hot Rolled Steel Sheet Medium Carbon Steel Sheet Product Quick Preview Product Name Carbon Steel Sheet Material A53 Gr.B,A36,ST52,ST35,ST42,ST45,X42,X46,X52,X60,X65,X , 70 Standard GB,ASTM,JIS,AISI,DIN Certificates ISO, RoHS, IBR, AISI, ASTM, GB, EN, DIN, JIS Thickness As requirement Length As requirement Surface Treatment Black paint,Varnish,Oil,Galvanized,Anti-corrosion coated Marking Standard marking or according to your request. Marking Method:Spray white paint End Treatment Plain End/Bevelled End/Grooved End/Threaded End With Plastic Caps Technique Hot Rolled Package Loose package;Packaged in bundles(2Ton Max);bundled pipes with slings at the both end for easy loading and discharging;wooden cases;waterproof woven bag Test Chemical Component Analysis,Mechanical Properties,Technical Properties,Exterior Size Inspection,hydraulic testing,X-ray Test Application Boiler&economizer, Energy, Petrochemical, Mining, Food, Paper, Gas And Fluid Industry A1045 Chemical Composition Cr C Si Mn P S Ni ≤0.25 0.42-0.50 0.17-0.37 0.50-0.80 ≤0.035 ≤0.035 ≤0.25 Advantages A1045 carbon steel has high strength, good plasticity and toughness. It belongs to the comprehensive mechanical properties of good steel, with very broad, mainly used to make the load of the larger small cross-section conditioning large normalizing and stress smaller parts, and of the request is not high intensity of surface quenching parts, such as the spindle, crank shaft, shaft, gear, worm, keys, pins, etc. Water quenching has a tendency to form cracks, and parts with complex shapes should be hardened in hot water or oil. Product Details Anti Corrosion Coated HR Medium Carbon Steel Sheet Metal 0.5-80mm 5mm 2mm 0 Anti Corrosion Coated HR Medium Carbon Steel Sheet Metal 0.5-80mm 5mm 2mm 1

Ningbo Keke Magnet Industry Co., Ltd. is professional China elevator traction machine neodymium magnets Manufacturers and Custom elevator traction machine neodymium magnets factory. Popular Grade: N33,N35,N38.N42,N45,N50,N52 N35SH/N38SH/N42SH N30UH/N35UH/N38UH/N40UG 35H/38H/40H/42H/45H/48H

Minimum Order: 1000

The YT29A portable pneumatic rock drill is a heavy-duty air-leg rock drill with high efficiency and low consumption. It is especially suitable for use in the construction of railways, highways, hydropower, etc. It is also used for mining roadway tunneling and various rock drilling operations in metallurgy, coal, etc. Replacement products. The YT29A air-leg rock drill is suitable for drilling horizontal and inclined holes in medium-hard and hard (f=8～18) rocks. It can also drill up rod holes. The diameter of the blast hole is generally 34- 45 mm, which is an effective and economical drilling. The hole depth is 5 meters. According to the size of the roadway section and operating conditions, it can be equipped with FT160A air legs, FT160C long air legs, FT160B short air legs or FT170 air legs, and it can also be used with drill rigs or rigs for dry and wet rock drilling. Model: YT29A Weight: 26.5 kg Length: 660 mm Drill tail specification: H22X108 Air consumption: ≤65 Rock Drilling Impact frequency: ≥37 Water pipe inner dia: ≥70 Borehole diameter: 34-45 mm Piston Diameter: 82 mm Piston Structure Stroke: 60 mm Working air Pressure: 0.63 Working water pressure: 0.3 Max Drilling Depth: 5 m

Minimum Order: 1 bags

Small seamless steel Pipe standard: ASTM, DIN, ISO, EN, JIS, GB, etc. Material: ASTM A106B、ASTM A53B、API 5L Gr.B、ST52、ST37、ST44 Outer diameter: 4mm-89mm, or as required. Wall thickness: 0.5mm-25mm, or as required. Length: 1m-12m, or as required. Surface: Lightly oiled, hot dip galvanized, electro-galvanized, black, bare, varnish coating/anti-rust oil, protective coating, etc. Package: Standard export package, or as required. Price term: EXW, FOB, CIF, CFR, CNF, etc. Payment: T/T, L/C, Western Union, etc. Export to America, Australia, Brazil, Canada, Peru, Iran, Italy, India, United Kingdom, Arab, etc. The website: https://www.lu-steelgroup.com Seamless steel pipes with small outer diameters can be called small-diameter seamless steel pipes. Small-diameter seamless steel pipes can also be divided into: seamless small-diameter steel pipes and straight seam (also called welded) small-diameter seamless steel pipes. The outer diameter of the steel pipe is 89mm or less, 4mm or more; they can be collectively referred to as small-diameter seamless steel pipes.

Minimum Order: 1 bags

Shan Dong Lu steel Group Co., Ltd is a professional production of Thick wall seamless steel pipe supplier Thick wall seamless steel pipe standard: ASTM, DIN, ISO, EN, JIS, GB, etc. Material: ASTM A106B、ASTM A53B、API 5L Gr.B、ST52、ST37、ST44 Outer diameter: 20mm-1200mm, or as required. Wall thickness: 0.5mm-25mm, or as required. Length: 1m-12m, or as required. Surface: Lightly oiled, hot dip galvanized, electro-galvanized, black, bare, varnish coating/anti-rust oil, protective coating, etc. Package: Standard export package, or as required. Price term: EXW, FOB, CIF, CFR, CNF, etc. Payment: T/T, L/C, Western Union, etc. Export to America, Australia, Brazil, Canada, Peru, Iran, Italy, India, United Kingdom, Arab, etc. More details link: https://www.lu-steelgroup.com The production process of thick-walled seamless steel pipes can be divided into four basic methods: cold drawing, cold rolling, hot rolling, and thermal expansion. Uses are divided into seamless steel pipes for structure; seamless steel pipes for transportation; seamless steel pipes for boilers; high-pressure seamless steel pipes for boilers; high-pressure seamless steel pipes for fertilizer equipment; seamless steel pipes for geological drilling; seamless steel pipes for oil drilling; Seamless steel pipes for petroleum cracking; seamless steel pipes for ships; cold-drawn cold-rolled precision seamless steel pipes; various alloy pipes. Seamless steel pipes are represented by outer diameter and wall thickness. Thick-walled seamless steel pipes are mainly used for mechanical processing, coal mines, hydraulic steel, and many other purposes.

Minimum Order: 1 bags

PRODUCT DESCRIPTION Introduction to stainless steel tube: 304 316 Pickling Polished Seamless Industrial Precision Inox Tube,Exhaust, Water, Gas Stainless Steel Round Pipe Stainless steel pipe is a hollow long cylindrical steel, his scope of application as a fluid pipeline, mainly widely used in petroleum, chemical, medical, food, light industry, mechanical instrumentation and other industrial pipeline and mechanical structural components. Stainless steel pipes are made of acid and heat resistant billets, heated, perforated, sized, hot rolled and cut. Manufacturing method: According to different production methods, it can be divided into hot rolled tube, cold rolled tube, cold drawn tube, extrusion tube and so on. 1.1. Hot rolled stainless steel seamless tubes are generally produced on automatic tube rolling sets. The solid tube blank is checked and cleared of surface defects, cut into the required length, centering on the perforated end face of the tube blank, and then sent to the heating furnace for heating, and perforated on the punch machine. In the perforation at the same time continuous rotation and forward, under the action of the roll and the top, the tube blank gradually formed a cavity, called the wool tube. Then it is sent to the automatic pipe mill to continue rolling. Finally, the wall thickness of the whole machine is adjusted, and the sizing machine is adjusted to meet the specification requirements. It is an advanced method to produce hot rolled seamless steel tube with continuous rolling tube set. 1.2 If you want to obtain seamless tubes with smaller size and better quality, you must use cold rolling, cold drawing or a combination of both methods. Cold rolling is usually carried out on a two-high mill. The steel pipe is rolled in an annular pass consisting of a circular groove with a variable section and a stationary conical top. Cold drawing is usually carried out in 0.5 ~ 100T single chain or double chain cold drawing machine. 1.3. Extrusion method: The heated tube blank is placed in a closed extrusion cylinder, and the perforated rod moves together with the extrusion rod to extrude the extruded parts from the smaller die hole. This method can produce smaller diameter steel pipe. This kind of steel pipe can be divided into stainless steel seamless steel pipe and stainless steel welded steel pipe (seam pipe) two categories, according to the different manufacturing process can be For: hot rolling, extrusion, cold drawing and cold rolling these basic types, according to the shape of the section and can be divided into round pipe and special-shaped pipe, widely used is round steel pipe, but there are some square, rectangular, semicircular, hexagonal, equilateral triangle, octagonal special-shaped stainless steel pipe. For the steel pipe under fluid pressure to carry out hydraulic test to test its pressure capacity and quality, under the specified pressure does not leak, wet or expansion for qualified, some steel pipe according to the standard or the requirements of the side test, flaring test, flattening test. Seamless stainless steel tube, also known as seamless stainless steel tube, is made of steel ingot or solid tube blank by perforation of wool tube, and then made by hot rolling, cold rolling or cold dialing. The specifications of seamless steel pipe are expressed by the number of millimeters of outer diameter * wall thickness.

Hollow Aluminum Tube standard: 1050,1060,1100,2014,2024,3003,3004,5083,5086,5 , 154,5356,5454,5456,5754,6005,6005 A ,6060,6061,6063,6082,6105,6162,6262,6351,7075 etc. Thickness：0.1-200mm,or as required Width：0.1-2000mm,or as required Size can be customized according to customer needs Surface: polishing, anodizing, powder coating, wood grain, polishing, drawing, electrophoresis and so on. Package: Standard airworthy export packaging: wooden pallets with plastic protection or according to customer requirements Price term: EXW, FOB, CIF, CFR, CNF, etc. Certificates: ISO9001&GS&ROHS&FDA&TUV&ISO&GL&BV,etc. Payment: L/C, T/T, Western Union, etc. Export to worldwide. More details link: https://www.wanmetal.com Hollow Aluminum Tube can be widely used in aluminum alloy windows, doors, curtain walls, handrails, ordinary aluminum, decorative and industrial aluminum.

Minimum Order: 1 bags

Sir. We are Small scale Gold Mining Company and Gold Supplier based in Tarkwa-Aboso, At the moment We have in stock large Quantities of Gold Bars and Uncut Diamonds, Gold Nuggets for sell, We Offer Gold for Jewelry Stores and shops, We 22+ Carat, Purity 94%+ and 23 Carat Gold Purity 98.95% , We have in stock 150kg Gold Bars for sell. We need Buyers, interested Buyers or Agents can contact us for more info, our direct phone numbers, T+233593816942 email mpatoam@gmail.com Paa Poakwa

Minimum Order: 100