Minerals & Metals

supplies steel finishing nails (headless nails) ranges from 16 to 125mm. Technical Info: Cupped head, smooth shank, diamond point, polished surface. Finish: Bright or electro galvanized Uses: Headless finishing nails are used for furniture-making, interior or exterior upholstery. Length 30 , 40 , 50 mm Diameter 3.00 mm The way of the finishing : Galvanized Packing : 1 Kg in small carton box then 25 Kg in big carton box Finishing Iron Nails Size Nail Length (inch) Gauge No. Nail Head Dia.(inch) Approx.pieces per lb 2d 1 16-1/2 0.086 1.473 3d 1-1/4 15-1/2 0.099 880 4d 1-1/2 < , br>15 0.1055 630 5d 1- , 3/4 15 0.1055 535 6d 2 13 0.135 288 7 , d 2-1/4 13 0.135 254 8d 2-1/2 12-1/2 0.142 196 9d 2-3/4 12-1/2 , 0.142 178 10d 3 11 , -1/2 0.155 124 12d 3-1 , /4 11-1/2 0.155 113 16 , d 3-1/2 11 0.162 93 20d 4 10 0.177 65 , 30d 4-1/2 9 - , - 40d 5 8 - - Brad Head Finishing Nails: SIZE LENGTH GAUGE < , br>GAUGE OF HEAD 3D 1-1/4" 15-1/2 12-1/2 4D 1-1/2" 15 , 12 6D 2" 13 < , br>10 8D 2-1/2" 12-1/2 9-1/4 10D 3" 11-1/ , 2 8-1/2 Yellow Zinc Plated Finish Nails: Product Name QTY in package Packing QTY (bags or boxes) Finish nails 1,4x25, yellow Zn plated min 5 mkr, 0,2 kg 25 bag 1211 4 Finish nails 1,6x30, yellow Zn plated min 5 mkr, 0,2 kg 25 bag 1101 5 Finish nails 1,6x40, yellow Zn plated min 5 mkr, 0,2 kg 25 bag 1141 7 Finish nails 1,8x40, yellow Zn plated min 5 mkr, 0,2 kg 25 bag 1071 8 Finish nails 1,8x50, yellow Zn plated min 5 mkr, 0,2 kg 25 bag 1104 15 Gauge, 4 D Galvanized Steel Nails for Finishing

brass nail and copper nail (Hard temper) - 62% Cu 38% Zn Packing: 1LB/box x 40boxes/carton 1/2" x Dia 1.5mm 5/8" x Dia 1.5mm 3/4" x Dia 1.65mm 1" x Dia 1.65mm Minimum 99.9% Copper Boat Nail (Hard temper) Square Body, Rose Head Packing:1kg/box x 20boxes/carton 1/2" x 2mm AF 5/8" x 2mm AF 3/4" x 2mm AF 1" x 2.5mm AF 1-1/4" x 2.5mm AF 1-1/2" x 3.2mm AF 2" x 3.2mm AF 2-1/2" x 3.2mm AF 3" x 4mm AF 3-1/2" x 4mm AF 4" x 4mm AF Minimum 99.9% Copper Tacks (Hard temper) Packing: 0.5kg/box x 40boxes/carton 1/2" 5/8" 3/4&qu , ot; 1" Serial Product Name 1. BRASS NAIL 1"X 14G BS-1202 PT-2 1974 2. BRASS NAILS 3/4" X 17G BS-1202 PT-2 1974 3. BRASS SCREW SLOTTED CSK HEAD 1/2" X 4 G BS 1210-1963 4. BRASS SCREW SLOTTED CSK HEAD 1/2" X 6 G BS 1210-1963 5. BRASS SCREW SLOTTED CSK HEAD 1-1/4" X 8 G BS 1210-1963 Minimum 99.9% Copper Rouves (Funnel-like Washers for Boat Nails) Packing:1kg/boxes x 20boxes/carton OD 1/2" thk 1.5mm hole less than 3mm. OD 5/8" thk 1.5mm hole less than 3mm OD 3/4" thk 1.5mm hole less than 3mm

Common nails designed with collated paper strip are mostly used as framing nails and roofing nails. It is made for quick uses and high efficiency works on the decking or flooring constructions. Normally the wire nails are hot dipped galvanized or copper plated to enhance the corrosion resistance and beautiful outlook. The collating angles of the nails can be different while Cnow mainly supplies four types: 34 degree, 28, 21, 17 degree. We will introduce one by one as following ( other angles can be done upon request). 34 Angel Degree Collated Framing Nails with Paper Strip: Collated Nails Collated at 34 Degree Figure No.1: 34 Degree Angle Collated Wire Nails, with Wire Diameter 2.87mm 34 degree paper collated framing nails are made with the diameter ranging from 2.87mm to 3.33mm. It is widely used in framing, decking, sub-flooring construction, pallet construction work, etc Nails Diameter:0.113"-0.131" Nail Lehgth:2"-3-1/2" Collated Angle:34 degree Surface treatment: Bright, Electro galvanized, hot dipped galvanized. Shank types:Smooth,ring,screw Material:Mild steel, high-carbon steel, stainless Point Types: Diamond,chisel,blunt,no-point,clinch-point , 28 Degree Paper Collated Nails for Framing Uses: (Figure No. 2) Galv. Steel Wire Nails for Window and Door Frames Figure No.2: 28 Angle Round Head Smooth Shank Collated Nails This type of collated framing nails are suitable for roofing, wood construction, door and window frames, furniture frames, case construction, etc. Nails Diameter:0.113"-0.131" Nails Length:2"-3-1/2" Collating Angle:28 degree Surface treatment, shanks, material and nails point types: same as 34 degree collated nails. 21 Angle degree Collated Framing Nails: (Referring to Figure No. 3) Common Nails with Collating Design for Quick Framing Figure No.3: 21 Angel Collating Wire Nails for Roofing and Furniture Frames Wire Diameter:0.113"-0.131" Nails Length:2"-3-1/2" Collating Angle:21 degree Shank types: Smooth,ring,screw,twist,barbed 17 Degree Plastic Collated Nails: Iron Nails with Paper Collating Forms Figure No. 4: 17 Angle degree plastic collated wire nails Angel 17 and 21 collated iron nails have the same wire diameter, length, material, shank types and surface treatment types. The only difference between them are the collated angles.

Specifications Iron nails made of polished low-carbon steel, cold processed, not heat treated except for galvanization. Hot dip galvanized at300g/m2 +/-10%, Minimum 650N/mm2, Flat, smooth, circular head; plain, round shank and diamond point, Length x diameter:75x3.6mm, head diameter: 7.7mm, packed in strong, thick PE 130g/m2 plastic bag, which can be zipped or locked, and Net weight: 0.5kg per type. Type: iron nails, made of polished low carbon steel, cold processed, not heat treated except for galvanisation. Rustproof: hot dip galvanised at 300g/m2 +/-10% Tensile strength: minimum 650N/mm2 Shape: flat smooth circular head, plain round shank and diamond point. Dimensions (+/-5%): length x diameter: 40x2.2mm, head diameter: 5mm to 5.5mm Packing: packed in strong thick PE 130g/m² plastic bag, which can be zipped or locked Quantity: net weight: 0.5 kg per type Wire Nails Technical Info: Wire Diameter Available: 0.083", 0.099", 0.113", 0.120", 0.131" Nail Length: 1-1/4" to 3-1/2" Nail Shank Types: Smooth, screw, ring Finish: Bright, vinyl coated, electro galvanized Angle: 16 degree, 15 degree, 10 degree, 0 degree Winding: Flat, conical Nails: 200-400pcs/coil Package: 20-60 coils/ ctns, 24-40ctns / pallet Roofing Coil Nails Technical Info: Angle: 15 degree flat or 16 degree conical. Wire Diameter: 0.120" Nail Length: 3/4" 7/8" 1" 1-1/4" 1-1/2" 1-3/4" Shanks Type: Smooth. Point: Diamond. Finish: Bright, electro galvanized Plastic Sheet Coil Nails Technical Info: Angle: 15 degree flat or 0 degree flat. Diameter: 0.113" 0.120" 0.131" Nail Length: 50mm-100mm Shanks: Smooth, screw, ring. Point: Diamond. Finish: bright, electric galvanized

Cnow supplies good quality oval wire nails used for concrete construction and building decoration. Our oval wire nails are mainly made of wire materials stainless steel wire SUS304, 316, 204,201. Nail Size: Length 10mm to 600mm, Diameter 1.9 to 6.0mm Nail Head: Oval, loose head, flat Finish: Polished, galvanized, hot dip galvanized Shank: smooth, twist, ring. Point: Long or short diamond point, no-point, semi-cut Oval Head Nails Stainless Steel 304 Oval Wire Nails, Ring Shanks

Iron Nails Material: Q195 , Q235 Size : 3/4"x18G, 1"X14G, 1.5"X14G, 2"X12G, 2.5"X11G, 3"X10G, 4"X9G, 4.5"X9G, 5.5"X4G, 6"X6G .etc. Finished: Good polished, flat head, diamond point, Our products include corrogated nails, common round nails and steel nails. We have the full set of equipments on the most advanced production line. Common Steel Nails Character: Diamond point, polished Length : 3/8''----7 '' Concrete Nail Standard: DIN GB Specification: Diameter: 2.2-6mm Length: 15-200mm Material: High-quality Carbon-Steel Q235 1022A Feature: Flat Head and Sunken Head, Round shank or Lined shank, Diamond Point, Needle Point Finish: Polished, Electric Galvanized, Hot Dipped Galvanized, Black Finished Packing: According to customer's requirement.

Clout nails are a kind of large head roofing nails. Also known as shingle nails or felt nails. We supply clout nails in copper and aluminum material, also copper disc rivets, aluminum tile pegs, copper slate straps and slate hooks for roofing construction and boat construction uses. Copper and aluminum nails are mainly used for securing slate roof tiles on houses. Copper Clout Nails for Boat Construction Clout nails in cu are often used with copper washers, to create a traditional copper rivet, similar to clinch or clench nailing. Copper rivets are often utilized in classic planked wooden boat construction. The sheathing nails have a large clout-like head (around 8mm) and a short round smooth shank. The large head design makes copper nails ideal for fastening copper sheet to the hulls of boats. The large head nails holds the sheet well and the smooth shank means that the nail can be removed easily and without causing hull damage when the materials eventually needs replacing. Specification of Clout Nails in Alu and Copper PRODUCT INFORMATION Description Standard Applied National & European Branding/Packaging Aluminiu , m Clout Nails 1kg BS 5534:2003 +A1:2010, EN 1301-2:2008 Bagged with Private Label Aluminium Clout Nails 5kg BS 5534:2003 +A1:2010, EN 1301-2:2008 White plastic tub, Private Label Aluminium Clout Nails 10kg BS 5534:2003 +A1:2010, EN 1301-2:2008 White plastic tub, Private Label Aluminium Clout Nails 25kg BS 5534:2003 +A1:2010, EN 1301-2:2008 Brown box, Private Label Aluminium Tile Pegs 1kg BS 5534:2003 +A1:2010, EN 1301-2:2008 Bagged with Private Label Aluminium Tile Pegs 5kg BS 5534:2003 +A1:2010, EN 1301-2:2008 White plastic tub, Private Label Aluminium Tile Pegs 10kg BS 5534:2003 +A1:2010, EN 1301-2:2008 White plastic tub, Private Label Aluminium Ring Shank Nail 1kg BS 5534:2003 +A1:2010, EN 1301-2:2008 Bagged with Private Label Copper Clout Nails 1kg BS 5534:2003 +A1:2010, EN 1981:1998 Bagged with Private Label Copper Clout Nails 5kg BS 5534:2003 +A1:2010, EN 1981:1998 White plastic tub, Private Label Copper Clout Nails 25kg BS 5534:2003 +A1:2010, EN 1981:1998 Brown box, Private Label Copper Ring Shank 1kg BS 5534:2003 +A1:2010, EN 1981:1998 Bagged with Private Label 19mm Copper Disc Rivets (pk100) BS 5534:2003 +A1:2010, EN 1981:1998 Bagged in 100's, Private Label 19mm Copper disc Rivets (pk 1000) BS 5534:2003 +A1:2010, EN 1981:1998 Boxed in 1000's, Private Label 150mm Copper Slate Straps (Pk10) BS 5534:2003 +A1:2010, EN 1981:1998 Bagged in 10's, Private Label 150mm Copper Slate Straps (Pk100) BS 5534:2003 +A1:2010, EN 1981:1998 Bagged in 100's, Private Label 80mm Spike End Slate Hooks SS BLK 316 (Tub 500) BS 5534:2003 +A1:2010, EN 10088-3:2012 Tub of 500, Private Label 100mm Spike End Slate Hooks SS BLK 316 (Tub 500) BS 5534:2003 +A1:2010, EN 10088-3:2012 Tub of 500, Private Label 120mm Spike End Slate Hooks SS BLK 316 (Tub 500) BS 5534:2003 +A1:2010, EN 10088-3:2012 Tub of 500, Private Label 150mm Spike End Slate Hooks SS BLK 316 (Tub 500) BS 5534:2003 +A1:2010, EN 10088-3:2012 Tub of 500, Private Label Flat Clout Nails with Barbed Shank Clout Nails with Barbed Shank Size:3/4"-3" Dia.: 2.5-3.76mm Finish: E.G.,H.D.G. Material: Iron, stainless steel Clout Nails With Barbed Shank Length: 3/4-3" Dia.:2.8-3.76mm Finish: bright, E.G., H.D.G. Shank: smooth, ring, barbed Large Head Galvanized Clout Nails with Barbed Shanks

A kind of common nails for wooden framing uses especially for pallets and wooden cases. Popular Nails Dimensions and Packing Size: 0.097 - 0.098 1 1/4" nails brass plated, diamond point, spiral shank, packed in 24 per bag; 1 1/4" nails brass plated, diamond point, spiral shank, packed in 50 lb box; 1 1/4" nails dark bronze plated, spiral shank, diamond point, packed in 24 per bag; 1 1/4" nails dark bronze plated, diamond point, spiral shank, packed in 50 lb box; 1 1/4" nails pewter nickel plated, diamond point, spiral shank, packed in 24 per bag; 1 1/4" nails pewter nickel plated, diamond point, spiral shank, packed in 50 lb box; 1 1/4" nails zinc plated, diamond point, spiral shank, packed in 24 per bag; 1 1/4" nails zinc plated, diamond point, spiral shank, packed in 50 lb box. 11/4" Steel Nails, Brass Plated Galvanized for Wooden Casing Uses Spiral Shank Concrete Nails, Pewter Nickel Plated Diamond Point, 1 1/4" pewter nickel plated steel nails, twisted shank nails Zinc Plated Iron Nails Hot Dip Galvanized Steel Nails Nail Size: 63.5MM length X 3.76MM diameter (Thickness 9 gauge) Plating: Hot Dip Galvanized Shank: Twisted Packing: In 24kg packing and 48kg packing in woven bags.

We have built a whole set of effective management system from raw materials procurement, manufacturing, quality control, packaging, transport and delivery to the after-sales service. All Kinds of Nails Our plant produces various nails, including the steel collated nails, headless nails, steel sheet nails, concrete nails, screwed nails, twisted nails, square boat nail, corrugated nails, felt nails, drywall nails, drilling nails, self tapping screws, etc. A variety of nail products in good quality. We can also make nails to meet your special requirements. Type of nails: Box nail, screw nail, finishing nail, double-head nail, cut flooring nail, ring threaded nail, masonry nail, casing nail. Type of screws: flat head, oval or raised head, pan head, round head, truss head, binding head, flange head, fillister head, socket head. We offer wire nails products such as binding wire , common wire nails and black steel nails. A. GI Binding wire: (BWG 21 X 4 KGS , BWG 10 X 4 KGS , BWG 12 X 4 KGS , BWG 16 X 4 KGS) , Zinc coat: 10-25g/m2 , Tensile strength: 40-85kg/mm2 , Soft Bend, PVC packing B. Black Steel Nails Hardened #65 carbon steel: 2.5 x 25 mm : 100 box/ctn packing 3.0 x 40 mm : 80 box/ctn packing 3.0 x 50 mm : 80 box/ctn packing 4.2 x 80 mm : 40 box/ctn packing 4.2 x 400 mm : 40 box/ctn packing C. Common Wire Nail (plain round shank , diamond point , round flat head , bright polished wooden case packing): 1" x 16 (9 kg) : 16 box/ctn packing 1.5" x 14 (9 kg) : 16 box/ctn packing 2" x 12 (9 kg) : 16 box/ctn packing 2.5" x 11 (9 kg) : 16 box/ctn packing 3.0" x 10 (9 kg) : 16 box/ctn packing 4.0" x 8 (9 kg) : 16 box/ctn packing Common Nail 2 inch, 2.5 inch, 3 inch packing: 20kgs net weight quantity: 27ton per - 1x20ft-container Galvanized Common Nail 1 inch, 1.25 inch, 1.5 inch, 2 inch, 2.5 inch, 3 inch, 4 inch Common Nail 2" x BWG11 - 20 x 1 Kg packs 2 3/4" x BWG10 - 20 x 1 Kg packs 50mm bright common nail-40mm x 2,00mm 50mm x 2,50mm 25.00 kg/ctn EG clout common nails 32mm x 2,80mm 40mm x 2,80mm 25.00 kg/ctn EG ROOFING SCREWS 5,0mm x 75mm 5,0mm x 90mm 25.00 kg/ctn Galvanized Steel Panel Pin Nails  Detailed Product Description Common nails, Common round nail 1. Material: High quality low carbon steel Q195 or Q215 or Q235 2.Finish : good polished, flat head, diamond point, hot-galvanized/electro- galvanized, smooth shank 3. The length: 0.5''- 6'' (12.7mm-152.4mm) 4.The diameter: BWG19- BWG5 5. Packing: 20-30kg/carton, or inside have the small boxes or bags. Or in according to the customer requirement 6. Delivery time: within 15 days after contract 7. It is used in construction and other industry feilds. Common Flat Head Nails Flat Head Common Nail Lenght # Carton 20 Kgs 30 mm 250 40 mm 300 50 mm 300 60 mm 400 70 mm 300 80 mm 500 90 mm 200 100 mm 500 120 mm 300 common nails & black annealed binding wires in bulk quantities nail packing shall be 5 kg box and binding wire shall be 5kg or 10kg rolls. common nail sizes vary from 1" to 4". (1" 5%, 1-1/5' - 5%; 2"-20%, 2-1/5"- 25%; 3" - 25%; 4"-20%). black annealed binding wire shall be of 18 to 20 SWG. construction common nail diam 3.6 mm x lenght 80 mm diam 3.8 mm x lenght 90 mm diam 3.4 mm x lenght 70 mm Common Steel Nails Product Info: Specification 2-1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 3" 3-1/2" 4" 5" Packing:1.33kg per box,16boxes to one carton Common Nails for s building materials as follows Polish common nails size BWG 11*2.5 nail length 6 cm packaging is packet 100 piece nails cartoon contain 12 packet, Spiral concrete nails size 2, High Carbon Steel Nails with Smooth SHANK size 2.5MM (T) X 25MM (L), High Carbon Steel Nails with Smooth SHANK size 3.0MM (T) X 50MM (L) , Wire steel rolls for binding rebar beams we need it soft galvanized bwg 21 size, wahser for nails. common nails make packages as picture attached. Nails 25pcs /per package. Nail dimensions: Wire diameter 1,2mm Length 20mm Head diameter 2,8mm Finishing zn plated. other nails # DISCRIPATION Grade Packing unit 1 Annular Groove Nail 75mm x 3.15mm GI 25 Kg/Pack Pack 2 Annular Groove Nails 60 x 3.5mm GI 25 Kg/Pack Pack 3 Jolt Head Nails 75 x 3.5mm GI 25 Kg/Pack Pack 4 Clad Nails 50 x 2.8mm GI 5 Kg/Pack Pack 5 Cement Board Nails 40 x 2.8mm GI 5 Kg/Pack Pack 6 Z Nail LH GI Nos 7 Z Nail RH GI Nos 8 Fluid Torx Decking Screw 12g x 65mm GI Nos 9 Bracket Screw 12g x 35mm GI 100 Kg/Pack Pack 10 Twin Thread Screw Torx Drive 12g x 80mm Nos 11 SQ Drive Screw 10g x 50mm GI Nos

High-quality, sturdy and durable FRP Garbage Can, made of fiber reinforced plastic (FRP), has the characteristics of high density, high rigidity, high pressure resistance, corrosion resistance, aging resistance, light weight, and beautiful appearance. It is widely used to provide cleaning services in the industries of hotel home furnishing, leisure and entertainment, communications, sanitation, property, decoration, construction, and chemical industry. FRP Garbage Can for storing unnecessary waste Product material: FRP (fiber reinforced plastic) Size width: can be customized

Runto New Materials is one of the most experienced and well-known manufacturers and suppliers of FRP Pultrusion Profile, GRP profiles and CFRP profiles in China. Runto New Materials is a well-known supplier among several leading manufacturers and distributors of FRP profiles, GRP profiles and CFRP profiles because it improves quality by providing high-quality profiles and GRP pipes on the market. Pultrusion is a continuous process using fiber reinforcements with thermosetting resin matrices. Pre-selected reinforcement materials, such as fiberglass roving, mat, woven fabrics or stitched fabric, are drawn through a resin bath in which all material is thorougly impregnated with a liquid thermosetting resin. Typical resins include polyesters, vinyl esters and phenolics. The wet-out fiber is formed to the desired geometric shape and pulled into a heated steel die. Once inside the die, the resin cure is initiated by controlling precise elevated temperature. The laminate solidifies in the exact cavity shape of the die, as it is continuously pulled by the pultrusion machine. Most any constant cross-section part can be pultruded. Then the product is passed through the mold by the puller clamping mechanism and cut into the required length with a saw. FRP Pultrusion Profile specifications: Round bar: D2mm-20mm Round tube: OD3mm-38mm Square tube: OD12mm-100mm Grooved rectangular rod T-shaped and H-shaped C shape Leg angle Performance characteristics of FRP pultruded profiles 1. Corrosion resistance The pultruded profile has excellent corrosion resistance, can withstand various degrees of acid, alkali, organic solvents and salts and other gas and liquid media corrosion, never rust, according to the actual use of the medium type and temperature requirements, there are neighbors Benzene type, isobenzene type, vinyl type, etc. are available for selection, please refer to the corrosion resistance table of pultruded profiles. 2. Lightweight and high strength The glass fiber content of the pultruded profile is higher than other composite material forming processes, so the longitudinal strength is quite high, which is equivalent to that of steel. The density of pultruded profile is only about one-fourth of that of steel, so the specific strength is much higher than that of steel. The modulus of pultruded profile is much higher. It is lower than steel, usually only 1/7-1/10 of steel. 3. Anti-aging The pultruded profile is made of high-quality thermosetting resin and glass fiber system, which is different from general thermoplastics, and the normal service life of the product can reach 20 years. The best anti-aging effect can be obtained by adding anti-ultraviolet agent and using polyester fiber felt. 4. Easy to maintain The pultrusion profile is made by blending the pigment into the resin. The color of the product can be arbitrarily blended according to customer requirements. It is not easy to fade, does not require paint maintenance and has a self-cleaning effect. 5. Excellent electromagnetic performance The pultruded profile has excellent electrical insulation, no electromagnetism and electric sparks, and can be used in equipment areas where there is a risk of electrical conduction and sensitive to magnetism, as well as in flammable and explosive places. 6. Thermal performance Pultrusion profile is a kind of thermal insulation material with a much lower coefficient of thermal expansion than ordinary plastics. Pultrusion has excellent mechanical properties at low temperatures and will not melt at high temperatures, but its strength and modulus will be reduced to a certain extent at high temperatures. , Generally, the applicable temperature range of pultruded profiles is -50℃-100℃. Glass fiber profile application FRP piles are widely used in gardens and agriculture to support plants such as vines, grapes, trees, flowers, flagpoles, brackets, travel tents, kites, umbrellas, and shaft model airplanes.

FRP Pipe is manufactured on a continuous filament winding machine. This machine consists of a mandrel composed of a helical wound continuous steel band, supported by beams forming a cylindrical shape. As the formed mandrel turns creating a multi-layered structural wall of the required thickness. GRP (Glass Reinforced Plastic) or FRP (Fiber Reinforce Plastic) piping systems are available in a variety of standard diameters ranging from 15mm to 4200 mm. RUNTO offers GRP (FRP) pipe and fittings to meet all national and international standards depending on the area and application. Characteristics of FRP Pipe 1) Good Corrosion-resistant property; Has good corrosion resistance. There is no need for cathodic anticorrosion protection and other anticorrosion measures, and it will not form secondary pollution to water and other media. 2) Lightweight, high strength; The product has a long service life. The net weight of the pipe is only 1/4 of the ductile iron pipe of the same size and length, and 1/10 of the cement pipe. 3) Installation conveniently; Convenient transportation and unloading, easy to install. Reduce pipe joints, speed up the installation rate, and improve the quality of the entire pipeline. 4) Smooth inner surface has good property of circulation; Reduce flow resistance, increase flow rate, and reduce energy consumption. Using a smaller diameter pipeline to transport the same flow of fluid can increase the flow by about 10% compared with the same size steel pipe. 5) Good low temperature-resistant; 6) Good thermal insulation. Application range of Runto FRP pipeline: 1. Chemical medium transportation pipeline 2. Domestic water transportation trunk pipes and water distribution pipes 3. Sewage collection and transportation pipeline 4. Pressure water pipes for micro hydropower stations on the road, circulating water pipes for power plants 5. Heat energy transmission pipeline, sea water transmission pipeline 6. Vacuum tube, external pressure tube and siphon tube 7. Agricultural machinery irrigation pipes 8. Oilfield water injection pipes and crude oil pipelines

FRP Storage Tank Description Runto New Materials provides a wide range of solutions for storing fluids or solids. These solutions are made of all FRP materials or double-layer laminated materials. The choice of materials makes Runto New Materials' storage tanks easy to install in different environments. Based on experience, we know that every application has its specific requirements. Runto New Materials' storage solutions include detailed engineering, manufacturing, transportation and installation of all components. Runto New Materials' FRP and double-layer laminated storage solutions are designed to comply with all international standards such as DIN, AD N1, ASME, RTP-1 and ISO. FRP vessels can be divided 1. By shape: Horizontal FRP Vessel Horizontal FRP vessel, also called horizontal FRP tank, is a device composed of an impermeable and corrosion-resistant inner layer, a solid structural layer, an anti-aging outer layer, a head, a nozzle, and a saddle. Flat Bottom FRP Vertical Vessel Flat Bottom FRP Vertical Vessel is manufactured by Italian technology. The inner bladder is injection molded, and the resin content of the inner bladder resin layer is 95%. The lining resin content is 80%. The inner bladder of the tank adopts a syringe mold, the straight section of the tank body is seamlessly connected with the upper head, and the structural layer of the tank body is integrally wound. The storage tank has light weight, high strength, strong corrosion resistance and long service life. 2. By manufacturing method: Shop vessel (within DN 4m), on site vessel (DN 4m - 25m), including FRP vessels combined with PVC, CPVC, PP, PE, PVDF, etc. 3. By application: Chemical storage, reaction kettle, scrubbing tower, spray tower, food fermentation, ultrapure water Characteristics of FRP Storage Tanks 1, light weight, high strength: relative density between 1.5 and 2.0, only carbon steel 1 / 4 to 1 / 5, but the tensile strength is close to or even more than carbon steel, and specific strength can compared with high-grade alloy steel. 2, good corrosion resistance: the atmosphere, water and the general concentration of acid, alkali, salt, and a variety of oils and solvents have better resistance. 3, excellent electrical properties: can be used to manufacture the insulator. 4, excellent thermal performance: 5, excellent technology: according to the shape of the product, technical requirements, the use of flexible selection of molding process; process is simple, can be a one-time molding, economic effect is outstanding. Application range of FRP Storage Tanks Medium application: 1. hydrochloric acid, sulfuric acid, phosphoric acid, nitric acid, organic acid, hydrofluoric acid, fluoride, saline, sewage etc.; 2. food grade (vinegar, soy sauce, water, etc.); 3. polyvinyl chloride (FRP/PVC), polypropylene (FRP/PP), etc. Industry application of FRP Tanks FRP tanks are widely used in petroleum, weaving factory, food brewing, electric power engineering, printing and dyeing factory, water supply and drainage engineering, chemical industry, seawater desalination, transportation, biological medicine, water conservancy irrigation and national defense engineering and other fields.

Mild steel black annealed wire 2.052 mm,1.628 mm, 1,3 mm in diameter, in big coils of 500 - 700 kg, with breaking strength of 350 - 380 N/sqmm. 10kg small coil black annealed tying wire: 1.47mm wire diameter 45000 to 55000 PSI 20% to 30% elongation Annealed Wire is made of carbon steel wire, used for weaving, baling in general. Applied for home use and the construction. Annealed wire is obtained by means of thermal annealing, endowing it with the properties it needs for its main use - setting. This wire is deployed both in civil construction and in agriculture. Hence, in civil construction annealed wire, also known as “burnt wire” is used for iron setting. In agriculture annealed wire is used for bailing hay. ANNEALED WIRE FOR CIVIL CONSTRUCTION: The annealing of bare wire (wire which has simply been drawn) can be carried out in batches (bell-type furnace) or in line (in-line furnace). Annealing is intended to return to the wire its ductility which it had lost during drawing. Annealed wire is stored in coils or spools of a varying weights and dimensions depending on the purposes for which it is intended and the needs of clients. The product does not usually have any type of protective lining, paper or plastic. We offer two kinds of annealed wire, bright annealed and black annealed wire. Black annealed wire gets its name from its plain black color. Wire Materials: Iron wire or carbon steel wire. Soft annealed wire offers excellent flexibility and softness through the process of oxygen free annealing. Uses: Black annealed wire is mainly processed into coil wire, spool wire or big package wire. Or further straightened and cut into cut wire and U type wire. Annealed wire is used as tie wire or baling wire in building, parks and daily binding. Packing: Spools, coils. Wire Diameters: Similar to galvanized iron wire, from 5mm to 0.15mm (wire gauge 6# to 38#).