Minerals & Metals

Phosphor Bronze Wire For Gold Plating. Alloy code: C5100(CuSn5). Diameter: 0.45mm, Round. Packing mode: DIN-355 Bobbin. Characteristic: Good anti-fatigue, Good anti-corrosion, Good anti-abrasion. Application: Phone Jack, Connector. If you have any demand or question on our products, please kindly contact us at anytime. Thanks so much! Remarks: (1) Price condition: FOB Busan port, Korea or CIF. (2) Price will be adjusted according to the LME price & quantity. (3) Payment term: T/T(Wire Transfer). (4) M.O.Q. will be adjusted based on the specification. (5) Certification: ISO 14001 & ISO 9001, comply with RoHS. (6) Country of origin: South Korea.

Phosphor Bronze Wire. Alloy code: C5100(CuSn5), C5191(CuSn6), C5212(CuSn8). Diameter: 0.03~9.00 mm; Square, Round, Pin. Packing mode: Bobbin, Coil, Carrier. Characteristic: Good anti-fatigue, Good anti-corrosion, Good anti-abrasion. Application: Connectors, Springs, Variety of electronic products. If you have any demand or question on our products, please kindly contact us at anytime. Thanks so much! Remarks: (1) Price condition: FOB Busan port, Korea or CIF. (2) Price will be adjusted according to the LME price & quantity. (3) Payment term: T/T(Wire Transfer). (4) M.O.Q. will be adjusted based on the specification. (5) Certification: ISO 14001 & ISO 9001, comply with RoHS. (6) Country of origin: South Korea.

Custom Hot-Dip Galvanized Chain Link Fences: 4-8ft Heights, 2-3 Inch Mesh Sizes Yundemei Chain Link Fence Factory specializes in custom-made chain link fences, offering a wide range of materials, surface treatments, and color options. Common materials include galvanized steel, PVC-coated wire, and stainless steel, ensuring strength and longevity. The fences are available in various heights, typically ranging from 4 to 8 feet, with mesh sizes such as 2-inch, 2.5-inch, and 3-inch, providing different levels of security and privacy. Surface treatments like hot-dip galvanizing, PVC coating, and powder coating enhance corrosion resistance, making them ideal for both outdoor and industrial environments.

6ft Chain Link Fencing and Accessories for British Columbia Projects 6ft chain link fencing and accessories form a complete perimeter system for projects in British Columbia, Canada. Product categories include standard galvanized chain link mesh, PVC-coated chain link fencing, and full accessory sets such as posts, rails, clamps, and tension wires. Materials typically use low-carbon steel wire with hot-dip galvanized or PVC coating for corrosion resistance. The standard height is 6 ft (≈1.8 m), with replaceable mesh gauges (9–12 gauge), mesh openings (40–60 mm), and customizable roll lengths and post sizes. Accessories are interchangeable for easy installation and maintenance. Fence Height: Fence height 6 ft (1.83 m) for boundary and security. Post Height and Installation Depth: Post height 10 ft (3.05 m) with 0.6–1.0 m embedment. Chain Link Material: Low-carbon steel wire with galvanized or PVC-coated finish. Mesh Opening Size: 2 inches (50 × 50 mm). Wire Gauge Range: 9–11.5 (≈3.76–2.95 mm). Coating and Surface Protection: Zinc coating 200–275 g/m²; PVC thickness 0.4– 0.8 mm. Post and Frame Components: Line posts, terminal posts, top rails, braces; size 48–60 mm. Accessory and Connection Parts: Tension bands, tie wires, clamps, tension bars. Roll Length and Panel: Roll length 10–30 m; custom sizes available. Application Scope: Residential, construction, sports, commercial, infrastructure fencing.

Aluminum Chain Link Fence, Aluminum Poles and Fittings, Fence Posts, Gate Posts and Accessories Aluminum Chain Link Fence with Aluminum Poles and Fittings offers corrosion- resistant fencing solutions. Available in standard heights ranging from 4 to 12 feet and mesh sizes of 2 inches, 2.5 inches, and 3 inches, this system provides flexibility for various security and boundary needs. The aluminum poles and fittings offer strength and weather resistance, making the fence ideal for both residential and commercial use. Common applications include residential boundaries, sports fields, parks, industrial enclosures, and security perimeters.

Black PVC Coated Galvanized Chain Link Fence Roll (50ft) in Multiple Heights – 9 Gauge Galvanized Chain Link Fence Roll of high-quality galvanized steel mesh is available in multiple heights, making it suitable for residential, commercial, and industrial fencing projects. Each roll spans 50 feet in length, ensuring extensive coverage for perimeter security, boundaries, or landscape features. Roll (50ft roll) for galvanized chain link fence (height- 4ft,5ft,6ft,7ft & 8ft) – 9 guage Material: High-quality galvanized steel wire Fence Length: 50 ft (15.24 meters) per roll Available Heights: 4 ft, 5 ft, 6 ft, 7 ft, and 8 ft Gauge: 9 Gauge (4.0 mm thickness) Mesh Size: 2″ x 2″ square mesh openings Coating: Galvanized coating for superior corrosion resistance Surface Finish: Smooth, rust-resistant finish Application: Ideal for perimeter fencing, security enclosures, and boundary walls Installation Method: Easily installed with posts, ties, and tension wires

Chain Link Fence Installation Ground Level with Concrete Foundations and Wall Mount Installation Methods Security chain link fence material supply and installation project in Netherlands, including replacement and new installation. The project is divided into two main sections. First Section – 1200 Meters: Standard chain link fence installation. Fence posts are fixed below ground level using concrete foundations for stable structural support. Second Section – 300 Meters: Chain link fence installation on an existing concrete wall using an anchoring system. First Part: 40 meters,Second Part: 260 meters. Anti-Intruder Chain Link Fence Supply (BS 1722-10) Chain link fence system supplied in accordance with BS 1722 Part 10. All components are hot-dip galvanized steel with green PVC coating for corrosion resistance and anti-intrusion performance. PVC coating on posts and fittings resists peeling, scratching, and damage during transport and installation. All fence components including bracing, tension bands, double clamps, bolts, and posts are supplied as a complete system for secure assembly. Post System: Terminal / corner / straining posts, line / intermediate posts at 3 m center-to-center spacing, post caps for protection. Gate System: 1 set of double-leaf swing gate (8 m width) Accessories: All additional fittings and installation accessories required for complete fence system supply included. Chain Link Mesh System: provides full perimeter coverage and stability. Line and Tension Wire System: 6 rows of line/tension wires along full fence length. Corner Post Tension Bars: 2 stretcher/tension bars per corner or straining post. Horizontal Bracing System: 2 horizontal bracing rods per corner or straining post. Diagonal Bracing System: 2 diagonal bracing rods per corner or straining post. Fixing Accessories System: tension bands, bolts, eye bolts, tie wire for fixing. Barbed Wire Security System: 6 rows of barbed wire along 1.5 km perimeter. Eye Bolt Fixing System: G.I. eye bolts for terminal and corner post fixing. Top Concertina Wire System: 1 row concertina wire installed along fence top line. Ground Concertina Wire System: 3 rows ground concertina wire, 0.65 m diameter. Security Chain Link Fence Specifications Straining and Corner Posts: 114.3 × 4.5 mm CHS posts to BS 1722 Part 10. Straining Post Material: Steel pipe complies with BS 1387 requirements. Straining Post Coating: Hot-dip galvanized to BS EN 1461 and PVC coated. Straining Post Height: 3.9 m height before installation. Straining Post Base Plate: 200 × 200 × 3 mm welded base plate. Straining Post Top Fittings: Two welded caps per post. Corner Post Y Crank: Y crank for barbed wire direction changes. Line and Intermediate Posts: 60.3 × 3.6 mm CHS posts to BS 1722 Part 10. Line Post Material: Steel pipe complies with BS 1387 requirements. Line Post Coating: Hot-dip galvanized and PVC coated. Line Post Height: 3.8 m height before installation. Line Post Base Plate: 200 × 200 × 3 mm welded base plate. Line Post Top Caps: Two welded caps per post. Chain Link Mesh: 50 mm mesh opening, 2.5 m width. Mesh Wire Diameter: 3.55 mm core wire diameter minimum. Mesh Standard: Plastic-coated zinc wire to BS 4102 Grade A. Line Wire Specification: 3.55 mm galvanized PVC-coated wire. Stirrup Wire Specification: BS 4102 Grade A galvanized wire. Stretcher Bars: 25 × 5 mm galvanized PVC-coated flat bar. Stretcher Bar Accessories: Cleats, eye bolts, and U connectors included. Barbed Wire: 3.0 mm zinc-coated wire to BS 4102. Concertina Wire Diameter: 650 mm outer coil diameter. Concertina Tape Thickness: 0.5 mm razor tape thickness. Concertina Core Wire: 2.5 mm high-tensile core wire. Double Swing Gate: 8 m wide double-leaf swing gate. Gate Material: Steel tubes to BS EN 10210-2. Gate Coating: Hot-dip galvanized and PVC coated. Gate Opening Angle: 180° opening with anti-removal hinges. Gate Locking System: Drop bolts, slam plates, and locking bars. Gate Mesh Infill: Same chain link mesh as fence. Gate Post Specification: 219.1 mm OD × 8.2 mm thick. Gate Frame Specification: 60.3 mm OD × 3.5 mm thick. Gate Bracing Specification: 42.2 mm OD × 3.5 mm thick. Gate Barbed Wire Arms: Vertical arms supporting 3 barbed wire strands. Gate Post Installation: Minimum 750 mm ground embedment depth. Gate Roller Wheels: Adjustable roller wheels with bottom rails.

PVC Coated Chain Link Fence Fabric Available in Black, Forest Green, and Dark Brown Colors Fence installation covering 300 linear meters. Fence Type: PVC coated galvanized chain link fence system in green color. Mesh Specification: Diamond pattern chain link mesh. Wire Diameter: 3.0 mm wire diameter. Fence Height: 1.8 m fence height. Roll Length: 25 m per roll. Post Spacing: Posts installed at 2 m intervals. Accessories: Fence posts and fittings for installation system. Galvanized and PVC Coated Chain Link Fence Export Specifications for 20GP Container Material: Galvanized steel core wire with PVC coating Colors: Green (RAL6005) Mesh Opening Sizes: 60 mm × 60 mm, 65 mm × 65 mm Wire Diameter: 2.0 mm (core) / 3.1 mm (with PVC coating) Roll Widths: 1.2 m, 1.48 m Roll Lengths: 10 m, 15 m Packaging Options: Loose rolling or palletized with protective wrapping to prevent coating damage during transit. Corrosion Resistance: Dual-layer protection combining a zinc galvanized foundation with an external polymer coating. UV Stability: PVC formulation resists fading, cracking, and weathering from exposure to sunlight.

ASTM A387 Grade 9 Class 2 is 9Cr-1Mo alloy steel plate for pressure vessels in the normalized and tempered condition. Class 2 provides higher mechanical properties than Class 1 for elevated-temperature power and process equipment. SHH STEEL supplies A387 Gr.9 Cl.2 plate with EN 10204 3.1 MTC, FOB Shanghai. Contact admin@steelspecs.com. Website: https://www.steelspecs.com /products/astm-a387- , grade-9-class-2-steel-plate/

ASTM A387 Grade 9 Class 1 is 9Cr–1Mo alloy steel plate for pressure vessels, annealed condition. Applied in elevated-temperature power and process equipment requiring higher chromium content. SHH STEEL supplies A387 Gr.9 Cl.1 plate with mill test certificates. Website: https://www.steelspecs.com/ Contact admin@steelspecs.com.

ASTM A387 Grade 5 Class 2 is 5Cr–0.5Mo alloy steel plate for pressure vessels in the normalized and tempered condition. Used where higher strength than Class 1 is specified for hot process service. SHH STEEL supplies A387 Gr.5 Cl.2 plate with MTC. Website: https://www.steelspecs.com/ Contact admin@steelspecs.com.

ASTM A387 Grade 5 Class 1 is 5Cr–0.5Mo alloy steel plate for pressure vessels, annealed condition. Intended for elevated-temperature service in petrochemical and refining equipment. SHH STEEL supplies A387 Gr.5 Cl.1 plate with EN 10204 3.1 MTC. Website: https://www.steelspecs.com/ Contact admin@steelspecs.com.

ASTM A387 Grade 2 Class 2 is chromium-molybdenum alloy steel plate (approx. 0.5Cr–0.5Mo) for pressure vessels. Class 2 denotes normalized and tempered condition for higher mechanical properties than Class 1. SHH STEEL supplies A387 Gr.2 Cl.2 plate with MTC. Website: https://www.steelspecs.com/ Contact admin@steelspecs.com.

ASTM A387 Grade 2 Class 1 is chromium-molybdenum alloy steel plate (approx. 0.5Cr–0.5Mo) for pressure vessels. Class 1 denotes the annealed condition. Used in elevated-temperature process and power equipment. SHH STEEL supplies A387 Gr.2 Cl.1 plate with MTC. Website: https://www.steelspecs.com/ Contact admin@steelspecs.com.