Minerals & Metals

Green gabion mesh is a mesh bag made of high-quality low-carbon steel wire as the base material, which is double-twisted and then sprayed with an environmentally friendly green coating. It can be filled with stones and combines protection, ecology and landscape, making it the preferred material for small and medium-sized protective projects. The steel wire is double-protected by galvanizing and environmentally friendly coating, making it corrosion-resistant, durable, and rust-resistant; the double-twisted structure is tight, tensile and impact-resistant, and not easily loosened; the green appearance blends with nature, is water-permeable and breathable, and can promote vegetation growth; it is lightweight and easy to carry, flexible in construction, can be cut and filled as needed, and has low maintenance costs.

A zinc steel fence (also referred to as zinc alloy steel railing or galvanized modular fence) is a prefabricated perimeter fencing system constructed from Q195/Q235 low-carbon steel tubes and pickets, protected by a two-stage corrosion-resistant treatment: hot-dip galvanizing as the base layer, followed by electrostatic powder coating as the decorative and weatherproof outer layer. Unlike traditional welded iron railings that corrode and require frequent repainting, the zinc steel fence system is engineered for decades of maintenance-free performance. Its weld-free, bolt-and-socket modular assembly means panels can be installed, repositioned, or replaced in sections without heavy equipment or skilled welders — making it the preferred choice for municipal infrastructure projects, residential estates, schools, and commercial boundaries.

Steel bar grating (also called steel grid plate or bar grate) is an open-mesh structural panel manufactured by orthogonally joining load-bearing flat bars and cross bars through pressure welding or press-locking. The result is a rigid, open-grid surface that simultaneously delivers load-bearing strength, ventilation, drainage, and anti-slip performance — all at a weight roughly 70% lighter than solid steel plate of equivalent bearing capacity. At Wanquan Wire Mesh, our steel grating is produced from Q235B carbon steel in standardized production workshops located in Anping County, Hebei — the heartland of China's wire mesh manufacturing industry. Every panel passes strict in-line quality inspection before shipment, conforming to ISO9001 and international project specifications.

The standard mesh size is 76×76mm, the Military Bunker Cage is lined with thickened geotextile, and it is modular, foldable, and can be filled with sand and gravel on-site. It is often used for military shelters, isolation of hazardous chemical storage areas, emergency flood control and water blocking, temporary explosion-proof barriers for construction sites, and slope protection and retaining. Military Bunker Cage Advantages: 1. Reliable Protection: Once filled, the entire cage bears its own weight, buffering the shockwave of an explosion, blocking flying fragments, and preventing collapse due to water resistance, superior to traditional loose sandbags. 2. Cost-Effective Transportation: Empty cages are folded and packaged, taking up little space in storage and loading, resulting in low freight costs for large-volume transport. 3. Efficient Construction: Interlocking joints and mechanical filling allow for construction speeds several times faster than sandbags, enabling rapid wall construction in emergency situations.

Our hexagonal expanded nickel mesh electrode for hydrogen electrolyzer offers optimized electrochemical performance in alkaline water electrolysis systems. Manufactured from pure nickel sheet through precision expansion, the hexagonal open structure provides outstanding electrical conductivity, large active surface area, and efficient gas-liquid transport. This expanded nickel mesh electrode is widely used as cathode or anode current collector in alkaline hydrogen electrolyzers. The hexagonal geometry improves bubble release, reduces overpotential, and supports higher current densities while maintaining excellent corrosion resistance in KOH electrolytes. Fully customizable in thickness, opening size, strand width, and overall dimensions to meet specific hydrogen electrolyzer electrode requirements.

Features 1.Fast Crushing：Quickly eliminates crusher blocks and provides smooth material flow. 2.High Productivity：Increase in work productivity by reducing the downtime of the crusher. 3.Location：Suitable location of the equipment enables you to reach the crusher and hopper at the same time. 4.Ranges：Broad selection of length and depth ranges for all types of crushing lines.  5.Easy Maintenance：High availability and easy maintenance in multi-shift operation. 6.Safety：High level of safety of the operators' work. 7.Productivity：High performance of the hydraulic unit of our own design. 8.Easy To Control：Sophisticated control system. 9.Hydraulic Hammer：Utilizes the maximum performance of the hydraulic hammer. 10.Individual Approach：Customized solution and optional equipment. OPERATE：Easy to operate. 11.Climate Adaptability：Designed for arctic as well as tropical temperatures, explosive atmospheres, and high altitudes. 12.Support：Supply of the equipment from the initial project to final delivery to the worksite, commissioning, and training of operators. 13.Guarantee：Extended warranty. Main parameters Model No.:WHC960 Boom Weight (without hammer):7714kg Max. Horizontal working radius:11920mm Max. Vertical working radius:9600mm Min. Vertical working radius:3360mm Max. Height:7200mm Max. Working Depth:7815mm Rotation:360° Why Choose YZH ? · More than 20 years of production experience & Rich field service experience. · Professional & Creative R&D team. · ISO9001: 2015, ISO45001: 2018, ISO14001: 2015 and CE Certification. · China price & China Speed. · Global After-sales Service. · Customized Service. · Responsible supplier & partner. · American Standard WPQR: ASME. · European Standard WPQR: ISO15614. Purchase Notice Warranty period: 1 year After sales service: During the warranty period, if there are quality issues, we will be available on call Transportation methods: Various transportation methods are accepted Packaging method: Suitable for various types of transportation

Minimum Order: 1 bags

Razor wire is available in different blade types to suit different security requirements. BTO series blades are commonly used for standard razor wire and concertina coils. They are produced from galvanized steel or stainless steel with blade lengths from 12 mm to 30 mm. BTO-22 and BTO-25 are the most frequently ordered types for perimeter fencing and industrial security. East of Weimin Street, Anping County, China sales@bxwiremesh.com +86-19134185927 +86-13184973926 WhatsApp: +86-19134185927 www.bxwiremesh.com Razor Wire is used for perimeter fencing, wall topping, restricted-area protection, and site security. It is also called razor barbed wire, barbed tape, or concertina wire. The product is made with a steel core wire and punched blade tape. Common materials are galvanized steel and stainless steel. Main types include single coil razor wire, concertina razor wire with clips, welded razor mesh, triple strand concertina wire, and rapid deployment razor wire system (available by order). Blade type, coil diameter, loop number, coil length, material, and packing should be confirmed before quotation. Specifications Product Name: Razor Wire, razor barbed wire, concertina wire, barbed tape Material: Galvanized steel or stainless steel Structure: Steel core wire with punched razor blade tape Blade Types: BTO-12, BTO-15, BTO-22, BTO-25, BTO-30, CBT-60, CBT-65 Blade Thickness: BTO type commonly 0.5 ± 0.05 mm; CBT type commonly 0.6 ± 0.05 mm Core Wire Diameter: Commonly 2.5 ± 0.1 mm Blade Length: BTO-12: 12 ± 1 mm; BTO-15: 15 ± 1 mm; BTO-22: 22 ± 1 mm; BTO- 25: 25 ± 1 mm; BTO-30: 30 ± 1 mm; CBT-60: 60 ± 2 mm; CBT-65: 65 ± 2 mm Blade Width: BTO-12, BTO-15, BTO-22: 15 ± 1 mm; BTO-25: 16 ± 1 mm; BTO-30: 18 ± 1 mm; CBT-60: 32 ± 1 mm; CBT-65: 21 ± 1 mm Barb Spacing: BTO-12: 26 ± 1 mm; BTO-15: 33 ± 1 mm; BTO-22: 34 ± 1 mm; BTO- 25: 40 ± 1 mm; BTO-30: 45 ± 1 mm; CBT-60 and CBT-65: 100 ± 2 mm Coil Type: Single coil or concertina cross coil with clips Common Outside Diameter: 450 mm, 500 mm, 600 mm, 700 mm, 800 mm, 960 mm Common Coil Length: Around 8 m to 16 m per coil, depending on diameter and loop number Surface Finish: Hot dipped galvanized, electro galvanized, or stainless steel by order Packing: Compressed coil, woven bag, carton, pallet, or project packing Safety Note: Razor wire has sharp blades. Installation should be handled with gloves, tools, and local safety rules.

Wire mesh cable tray is used for routing low voltage cables, telecommunication cables, data cables, and fiber optic cables on short spans. It is made from welded steel wire mesh with an open basket structure. The open design helps cable ventilation and makes cable checking easier during installation and maintenance. Standard length is 3000 mm. Common mesh pitch is 100 x 50 mm, and 50 x 50 mm can be made by order. East of Weimin Street, Anping County, China sales@bxwiremesh.com +86-19134185927 +86-13184973926 WhatsApp: +86-19134185927 www.bxwiremesh.com Wire Mesh Cable Tray is used for routing low voltage cables, telecommunication cables, data cables, and fiber optic cables on short spans. It is made from welded steel wire mesh with an open basket structure. The open design helps cable ventilation and makes cable checking easier during installation and maintenance. Standard length is 3000 mm. Common mesh pitch is 100 x 50 mm, and 50 x 50 mm can be made by order. Surface finish can be electro zinc plated, hot dipped galvanized, powder coated, pre-galvanized, or stainless steel electropolished. Width, height, wire diameter, finish, accessories, and packing should be confirmed by project requirement. Specifications Product Name: Wire Mesh Cable Tray, wire basket cable tray, welded wire cable tray Material: Carbon steel wire or stainless steel wire by order Structure: Welded steel wire mesh, open basket type Standard Length: 3000 mm Mesh Pitch: 100 x 50 mm as common pitch; 50 x 50 mm available by order Width: According to project requirement Height: According to project requirement Wire Diameter: According to tray size and load requirement Surface Finish: Electro zinc plated, hot dipped galvanized, powder coated, pre- galvanized Z300, or stainless steel electropolished Electro Zinc Plated: For indoor use, reference BS EN 12329-2000, approx. 12 microns when required Hot Dipped Galvanized: For outdoor use, reference BS EN 1461-1999, commonly 60- 80 microns when required Powder Coated: Mainly for indoor use. Color and coating thickness should be confirmed by order Pre-Galvanized: Z300 coating can be checked according to order Stainless Steel Finish: Electropolishing available for stainless steel trays Accessories: Hold down saddle, joiner clamp set, wall bracket, hanging bracket, support, bolt and nut set Packing: Iron pallet or export pallet packing Use Note: Load capacity and support span should be checked according to tray size, wire diameter, cable weight, and installation method.

Steel grating is used for platforms, walkways, stair treads, trench covers, drainage covers, bridge side paths, and industrial flooring. It is made from bearing flat bars and cross bars by pressure welding or press locking. Common materials include Q235 low carbon steel, galvanized steel, and stainless steel. Alloy steel can be checked by order. Surface can be plain, serrated, or I-bar type. The most widely used finish is hot dipped galvanized for outdoor and humid environments. East of Weimin Street, Anping County, China sales@bxwiremesh.com +86-19134185927 +86-13184973926 WhatsApp: +86-19134185927 www.bxwiremesh.com Steel Grating is used for platforms, walkways, stair treads, trench covers, drainage covers, bridge side paths, and industrial flooring. It is made from bearing flat bars and cross bars by pressure welding or press locking. Common materials include Q235 low carbon steel, galvanized steel, and stainless steel. Alloy steel can be checked by order. Surface can be plain, serrated, or I-bar type (I-bar available by order). Hot dipped galvanized finish is often used for outdoor projects. Panel size, bearing bar size, bar spacing, cross bar spacing, surface type, finish, and edge banding should be confirmed according to span and load requirement. Specifications Product Name: Steel Grating, welded steel grating, galvanized steel grating Material: Q235 low carbon steel, galvanized steel, stainless steel, or alloy steel by order Bearing Bar: Flat steel bar Common Bearing Bar Size: 20 x 3 mm, 25 x 3 mm, 32 x 3 mm, 40 x 3 mm, 20 x 5 mm, 25 x 5 mm, 32 x 5 mm, 40 x 5 mm, 45 x 5 mm, 50 x 5 mm, 55 x 5 mm, 60 x 5 mm Cross Bar: Round bar, twisted square bar, square bar, or hexagonal bar Common Bearing Bar Pitch: 30 mm, 40 mm, 60 mm Common Cross Bar Pitch: 50 mm or 100 mm Grating Type: Welded grating, press locked grating, dense grating, trench cover, stair tread Surface Type: Plain surface, serrated surface, or I-bar type by order Finish Treatment: Hot dipped galvanized, electro galvanized, painted, anti-rust oil, or black untreated surface by request Code Reference: Example: G325/30/100 usually means 32 x 5 mm bearing bar, 30 mm bearing bar pitch, and 100 mm cross bar pitch. Some codes may vary by market, so drawing confirmation is recommended. Panel Size: Made according to project drawing or cutting list Edge Banding: Flat bar banding available by order Use Note: Load capacity depends on bearing bar size, grating span, support condition, bar spacing, and installation method. Please confirm load and span before production.

Anti Climb Fence is made from welded steel mesh with narrow openings to reduce hand and foot hold points. It is also called 358 mesh fence, high security fence, anti-climbing fence, or anti-cutting fence. Standard 358 mesh refers to 3″ x 0.5″ opening and 8 gauge wire, equal to about 76.2 x 12.7 mm opening East of Weimin Street, Anping County, China sales@bxwiremesh.com +86-19134185927 +86-13184973926 WhatsApp: +86-19134185927 www.bxwiremesh.com Anti Climb Fence is made from welded steel mesh with narrow openings to reduce hand and foot hold points. It is also called 358 mesh fence, high security fence, anti-climbing fence, or anti-cutting fence. Standard 358 mesh refers to 3″ x 0.5″ opening and 8 gauge wire, equal to about 76.2 x 12.7 mm opening with around 4.0 mm wire. Panels are usually made from Q235 steel wire and used with square or rectangular steel posts. Surface treatment can be hot dipped galvanized, polyester powder coated, or PVC coated by order. Specifications Product Name: Anti Climb Fence, 358 mesh fence, high security welded mesh fence Material: Q235 steel wire and steel posts Standard 358 Mesh Opening: 12.7 x 76.2 mm, also called 0.5″ x 3″ Other Mesh Opening: 25 x 75 mm or special narrow opening by order Panel Height: 1.8 m, 2.0 m, 2.4 m, 3.0 m, or made by order Panel Width: 2.0 m, 2.2 m, 3.0 m, 4.0 m Wire Diameter: 3.0 mm, 3.5 mm, 4.0 mm, 4.5 mm, 5.0 mm Post Type: Square post or rectangular post Square Post Size: 50 x 50 mm, 60 x 60 mm, 80 x 80 mm Rectangular Post Size: 40 x 60 mm, 40 x 80 mm, 60 x 80 mm, 80 x 100 mm Post Length: 2.0 m, 2.5 m, 3.0 m, or according to panel height and embedded depth requirement Post Installation: Embedded post or flanged base plate Surface Treatment: Hot dipped galvanized, galvanized plus polyester powder coated, or PVC coated by order Common Color: Green, black, grey, or RAL color by order Use Note: Small mesh opening helps reduce climbing points and makes cutting harder with common tools. Final security level depends on wire diameter, panel height, post size, clips, bolts, and installation method.

Chain link fence is woven from low-carbon steel wire into a diamond mesh. It is supplied with a galvanized or PVC-coated finish for residential boundaries, sports grounds, construction sites, and animal enclosures. The open diamond structure maintains visibility and airflow while providing a secure barrier. Mesh opening typically ranges from 25 mm to 100 mm, with steel wire diameters from 1.20 mm to 5.00 mm. Roll heights are available from 0.5 m to 5.0 m, and roll lengths from 1 m to 50 m. East of Weimin Street, Anping County, China sales@bxwiremesh.com +86-19134185927 +86-13184973926 WhatsApp: +86-19134185927 www.bxwiremesh.com Chain link fence is woven from low-carbon steel wire (Q195 or Q235 by order) into a diamond mesh. It is supplied with a galvanized or PVC-coated finish for residential boundaries, sports grounds, construction sites, and animal enclosures. The open structure maintains visibility and airflow. Mesh opening, wire diameter, and roll height can be adjusted for different fence lines. Smaller openings and heavier wire provide a stiffer fabric but also increase roll weight. Buyers should state the steel core diameter, coating type, mesh size, and edge finish when requesting a quotation. Specifications Material: Low-carbon steel wire (Q195 or Q235 by order) Mesh Opening: 25, 40, 50, 55, 60, 65, 76, or 100 mm (other sizes by order) Steel Wire Diameter: 1.20–5.00 mm Roll Height: 0.5–5.0 m Roll Length: 1–50 m Mesh Shape: Diamond opening Edge Finish: Knuckled, twisted, or knuckled and twisted Finish: Galvanized or PVC-coated PVC-Coated Wire: The steel core diameter and finished coated diameter must be stated separately. Industry specifications normally identify polymer-coated fabric by its core wire size, not its finished outside diameter. Galvanized Fabric: Zinc coating weight is supplied according to the confirmed order. “Heavy galvanized” should not be used in the contract unless the required coating weight is stated. ASTM A392 treats mesh size, wire size, fabric height, selvage, zinc coating weight, and breaking strength as separate specification items. Packing: Compacted rolls with protective wrapping. Pallet packing is available when agreed before production. Order Information: Please provide mesh opening, core wire diameter, finish, roll height, roll length, edge treatment, and required quantity.

Wire mesh fence is made from welded low-carbon steel wire (Q195 or Q235 by order). It is used for gardens, residential compounds, factories, and public facilities. The standard mesh opening is 50 × 120 mm, with panel widths of 2.0 m or 2.5 m, and heights from 0.6 m to 2.0 m. Available finishes include electro-galvanized for indoor or light outdoor use, hot-dip galvanized for long-term outdoor exposure, and PVC coated for colored visible sites. East of Weimin Street, Anping County, China sales@bxwiremesh.com +86-19134185927 +86-13184973926 WhatsApp: +86-19134185927 www.bxwiremesh.com Wire mesh fence is made from welded low-carbon steel wire (Q195 or Q235 by order). It is used for gardens, residential compounds, factories, and public facilities. The standard mesh opening is 50 × 120 mm (other openings by order). Standard panel widths are 2.0 m and 2.5 m, with heights from 0.6 m to 2.0 m (taller sizes by order). Available finishes include electro-galvanizing, hot-dip galvanizing, and PVC coating. For coated panels, the steel core is approximately 3.2 mm and the finished diameter is approximately 4.0 mm (coating thickness confirmed by order). Posts and fittings are supplied according to panel height and installation requirements. Specifications Material: Low-carbon steel wire (Q195 or Q235 by order) Production Method: Welded mesh panel Mesh Opening: 50 × 120 mm (other openings by order) Steel Core Diameter: Approximately 3.2 mm Diameter After PVC Coating: Approximately 4.0 mm (coating thickness confirmed by order) Panel Width: 2.0 m or 2.5 m Panel Height: 0.6, 0.8, 1.0, 1.2, 1.5, 1.8, or 2.0 m (taller sizes by order) Surface Options: Electro-galvanized, hot-dip galvanized, or PVC-coated End Treatment: Bent ends or straight ends (confirmed by order) Fence Posts: Supplied according to panel height and fixing method Fixings: Clips, brackets, and bolts subject to the selected post system Packing: Panels and posts packed separately. Packing details are confirmed before shipment. Important: The final wire diameter depends on coating thickness. Core diameter and finished diameter should both appear on the purchase order.

Crimped wire mesh is woven from pre-crimped carbon steel, galvanized steel, or stainless steel wire. The crimped intersections hold the wires in position and help maintain the specified opening under screening conditions. It is mainly supplied for screening stone, gravel, aggregate, coal, and other bulk materials. Lighter specifications are also used for machine guards, workshop partitions, and ventilation panels. East of Weimin Street, Anping County, China sales@bxwiremesh.com +86-19134185927 +86-13184973926 WhatsApp: +86-19134185927 www.bxwiremesh.com Crimped wire mesh is woven from pre-crimped carbon steel, galvanized steel or stainless steel wire. The crimped intersections hold the wires in position and help maintain the specified opening. It is mainly supplied for screening stone, coal, aggregate and other bulk materials. Lighter specifications are also used for machine guards and industrial partitions. Buyers should specify the clear aperture and wire diameter in millimetres. This avoids confusion between SWG, BWG and other wire-gauge systems. Specifications Materials: Carbon steel, galvanized steel or stainless steel Manufacturing Method: Wire crimped before weaving Opening: Square opening unless otherwise specified Aperture Measurement: Clear distance between two adjacent wires Specification Method: Clear aperture × wire diameter Weave: Pre-crimped woven construction Supply Form: Rolls or cut panels, depending on wire diameter and finished stiffness Dimensions: Made according to the confirmed panel or roll size Edges: Cut edges or finished edges by order Required Order Details: Material, clear aperture, wire diameter, width, length, quantity and intended application ASTM E2016 treats opening, wire diameter, weave and material as separate purchasing parameters. These items should appear individually on the order sheet. Applications Screening stone, gravel and aggregate Coal and dry bulk-material sizing Machine guards and workshop partitions Stainless steel screens for selected food-processing equipment For direct food contact, stainless steel grade, surface condition and applicable food-contact requirements must be confirmed. Carbon steel and galvanized mesh should not be presented as food-grade material.

Hexagonal wire netting is available in different mesh openings to suit different applications. Smaller openings such as 1/2" and 5/8" are used for poultry cages, small animal enclosures, and garden protection where the mesh needs to contain small birds or keep out small pests. Medium openings such as 3/4" and 1" are common choices for farm fencing, garden boundaries, and general light partition work East of Weimin Street, Anping County, China sales@bxwiremesh.com +86-19134185927 +86-13184973926 WhatsApp: +86-19134185927 www.bxwiremesh.com Hexagonal Wire Netting is woven from low carbon steel wire, galvanized wire or PVC coated galvanized wire. It is commonly used for poultry fencing, garden protection, light partition mesh, plaster support, insulation covering and stone cage work. The mesh has a hexagonal opening and can be made with straight twist or reverse twist. For outdoor use, hot dipped galvanized and PVC coated types are more common. Light rolls are easy to cut and install. Heavy type hexagonal wire netting is used where thicker wire and better shape retention are required, such as gabion baskets and slope protection. Specifications Material: Low carbon steel wire, galvanized iron wire, PVC coated galvanized wire Mesh Opening: 1/2″, 5/8″, 3/4″, 1″, 1-1/4″, 1-1/2″, 2″ Wire Diameter: BWG18 to BWG25 for light type; 2.0 mm to 4.0 mm for heavy type Surface Treatment: Electro galvanized, hot dipped galvanized, galvanized before weaving, galvanized after weaving, PVC coated PVC Coating Color: Green, white, gray and other colors by order Weaving Type: Straight twist or reverse twist Edge Type: Single edge, double edge, reinforced edge Roll Width: Common width up to 2.0 m; some narrow rolls can be supplied around 4 ft Zinc Coating: Standard zinc coating depends on wire size and finish. Heavy galvanized coating can be made according to order. Wire Tensile Strength: Around 350 N/mm² can be used as a reference for common steel wire. Final value should follow confirmed material and order details. Packing: Wrapped rolls, pallet packing, or export packing according to roll size