Minerals & Metals

Porduct Name PTFE filter screen Brand PTFE/PVDF Mesh size 0.5-400Mesh 0.3X0.5mm 1X2mm 2X3mm 3X6mm 4X8mm 5X10mm Wire diameter thickness 5.0mm-0.05mm Weaving method Plain weave, twill weave, mat weave Diamond shaped hole, circular hole, square hole, elongated circular hole, hexagonal hole Density 2.2g/cm3 Melting point -200～+250℃℃ Characteristic (1) Chemical stability: Almost all chemical resistances, strong acids, strong bases, and organic solvents do not affect it. (2) Thermal stability: The cracking temperature is above 400 ℃. Therefore, it can operate normally within the temperature range of -200 ℃ to 300 ℃, and can reach up to 250 ° C Suitable for various high-temperature, strong acid, strong alkali chemical fields. (3) Friction reducing properties: PTFE material has an extremely low friction coefficient of only 0.02, which is 1/40 of rubber (4) Self lubrication: The surface of PTFE material has outstanding self-lubricating properties, and almost all viscous substances cannot adhere to its surface.   Appliaction High temperature resistance - operating temperature up to 250 ℃. Low temperature resistance - with good mechanical toughness; Even if the temperature drops to -196 ℃, it can maintain a 5% elongation rate. Corrosion resistance - exhibits inertness towards most chemicals and solvents, and can withstand strong acids, alkalis, water, and various organic solvents. Climate resistance - has an aging life in plastics. High lubrication - is the highest friction coefficient in solid materials. Non adhesive - refers to the small surface tension in solid materials that does not adhere to any substance. Non toxic - physiologically inert, with no adverse reactions when implanted into artificial blood vessels and organs for a long time. The weaving process adopts arrow loom plain weave, diagonal weave, and dense weave, and the weaving mesh can be controlled between 15 mesh and 400 mesh. Polytetrafluoroethylene gas-liquid filter can be used for a long time in any type of acidic or alkaline medium. Polytetrafluoroethylene gas-liquid filter can withstand the corrosion of hydrofluoric acid, phosphoric acid, sulfuric acid, nitric acid, hydrochloric acid, various organic acids, organic solvents, and other highly corrosive chemical media. Even highly corrosive aqua regia (a mixture of concentrated sulfuric acid and concentrated nitric acid) is helpless against it. It is widely used in industries such as aviation, chemical, electronics, bridges, textiles, machinery, papermaking, ceramics, etc. Contact Information Whatsapp:+86-13315865785 Email:estrellayue@ , ofolan.com M.P:+86-13315865785

Minimum Order: 1 bags

Porduct Name PTFE filter cloth Brand PTFE/PVDF Mesh size 0.5-400Mesh 0.3X0.5mm 1X2mm 2X3mm 3X6mm 4X8mm 5X10mm Wire diameter thickness 5.0mm-0.05mm Weaving method Plain weave, twill weave, mat weave Diamond shaped hole, circular hole, square hole, elongated circular hole, hexagonal hole Density 2.2g/cm3 Melting point -200～+250℃℃ Characteristic (1) Chemical stability: Almost all chemical resistances, strong acids, strong bases, and organic solvents do not affect it. (2) Thermal stability: The cracking temperature is above 400 ℃. Therefore, it can operate normally within the temperature range of -200 ℃ to 300 ℃, and can reach up to 250 ° C Suitable for various high-temperature, strong acid, strong alkali chemical fields. (3) Friction reducing properties: PTFE material has an extremely low friction coefficient of only 0.02, which is 1/40 of rubber (4) Self lubrication: The surface of PTFE material has outstanding self-lubricating properties, and almost all viscous substances cannot adhere to its surface.   Appliaction High temperature resistance - operating temperature up to 250 ℃. Low temperature resistance - with good mechanical toughness; Even if the temperature drops to -196 ℃, it can maintain a 5% elongation rate. Corrosion resistance - exhibits inertness towards most chemicals and solvents, and can withstand strong acids, alkalis, water, and various organic solvents. Climate resistance - has an aging life in plastics. High lubrication - is the highest friction coefficient in solid materials. Non adhesive - refers to the small surface tension in solid materials that does not adhere to any substance. Non toxic - physiologically inert, with no adverse reactions when implanted into artificial blood vessels and organs for a long time. The weaving process adopts arrow loom plain weave, diagonal weave, and dense weave, and the weaving mesh can be controlled between 15 mesh and 400 mesh. Polytetrafluoroethylene gas-liquid filter can be used for a long time in any type of acidic or alkaline medium. Polytetrafluoroethylene gas-liquid filter can withstand the corrosion of hydrofluoric acid, phosphoric acid, sulfuric acid, nitric acid, hydrochloric acid, various organic acids, organic solvents, and other highly corrosive chemical media. Even highly corrosive aqua regia (a mixture of concentrated sulfuric acid and concentrated nitric acid) is helpless against it. It is widely used in industries such as aviation, chemical, electronics, bridges, textiles, machinery, papermaking, ceramics, etc. Contact Information Whatsapp:+86-13315865785 Email:estrellayue@ , ofolan.com M.P:+86-13315865785

Minimum Order: 1 bags

Porduct Name 200 mesh PTFE filter screen Brand PTFE/PVDF Mesh size 0.5-400Mesh 0.3X0.5mm 1X2mm 2X3mm 3X6mm 4X8mm 5X10mm Wire diameter thickness 5.0mm-0.05mm Weaving method Plain weave, twill weave, mat weave Diamond shaped hole, circular hole, square hole, elongated circular hole, hexagonal hole Density 2.2g/cm3 Melting point -200～+250℃℃ Characteristic (1) Chemical stability: Almost all chemical resistances, strong acids, strong bases, and organic solvents do not affect it. (2) Thermal stability: The cracking temperature is above 400 ℃. Therefore, it can operate normally within the temperature range of -200 ℃ to 300 ℃, and can reach up to 250 ° C Suitable for various high-temperature, strong acid, strong alkali chemical fields. (3) Friction reducing properties: PTFE material has an extremely low friction coefficient of only 0.02, which is 1/40 of rubber (4) Self lubrication: The surface of PTFE material has outstanding self-lubricating properties, and almost all viscous substances cannot adhere to its surface.   Appliaction High temperature resistance - operating temperature up to 250 ℃. Low temperature resistance - with good mechanical toughness; Even if the temperature drops to -196 ℃, it can maintain a 5% elongation rate. Corrosion resistance - exhibits inertness towards most chemicals and solvents, and can withstand strong acids, alkalis, water, and various organic solvents. Climate resistance - has an aging life in plastics. High lubrication - is the highest friction coefficient in solid materials. Non adhesive - refers to the small surface tension in solid materials that does not adhere to any substance. Non toxic - physiologically inert, with no adverse reactions when implanted into artificial blood vessels and organs for a long time. The weaving process adopts arrow loom plain weave, diagonal weave, and dense weave, and the weaving mesh can be controlled between 15 mesh and 400 mesh. Polytetrafluoroethylene gas-liquid filter can be used for a long time in any type of acidic or alkaline medium. Polytetrafluoroethylene gas-liquid filter can withstand the corrosion of hydrofluoric acid, phosphoric acid, sulfuric acid, nitric acid, hydrochloric acid, various organic acids, organic solvents, and other highly corrosive chemical media. Even highly corrosive aqua regia (a mixture of concentrated sulfuric acid and concentrated nitric acid) is helpless against it. It is widely used in industries such as aviation, chemical, electronics, bridges, textiles, machinery, papermaking, ceramics, etc. Contact Information Whatsapp:+86-13315865785 Email:estrellayue@ , ofolan.com M.P:+86-13315865785

Minimum Order: 1 bags

Porduct Name Export standard 500 mesh PTFE filter screen Brand PTFE/PVDF Mesh size 0.5-400Mesh 0.3X0.5mm 1X2mm 2X3mm 3X6mm 4X8mm 5X10mm Wire diameter thickness 5.0mm-0.05mm Weaving method Plain weave, twill weave, mat weave Diamond shaped hole, circular hole, square hole, elongated circular hole, hexagonal hole Density 2.2g/cm3 Melting point -200～+250℃℃ Characteristic (1) Chemical stability: Almost all chemical resistances, strong acids, strong bases, and organic solvents do not affect it. (2) Thermal stability: The cracking temperature is above 400 ℃. Therefore, it can operate normally within the temperature range of -200 ℃ to 300 ℃, and can reach up to 250 ° C Suitable for various high-temperature, strong acid, strong alkali chemical fields. (3) Friction reducing properties: PTFE material has an extremely low friction coefficient of only 0.02, which is 1/40 of rubber (4) Self lubrication: The surface of PTFE material has outstanding self-lubricating properties, and almost all viscous substances cannot adhere to its surface.   Appliaction High temperature resistance - operating temperature up to 250 ℃. Low temperature resistance - with good mechanical toughness; Even if the temperature drops to -196 ℃, it can maintain a 5% elongation rate. Corrosion resistance - exhibits inertness towards most chemicals and solvents, and can withstand strong acids, alkalis, water, and various organic solvents. Climate resistance - has an aging life in plastics. High lubrication - is the highest friction coefficient in solid materials. Non adhesive - refers to the small surface tension in solid materials that does not adhere to any substance. Non toxic - physiologically inert, with no adverse reactions when implanted into artificial blood vessels and organs for a long time. The weaving process adopts arrow loom plain weave, diagonal weave, and dense weave, and the weaving mesh can be controlled between 15 mesh and 400 mesh. Polytetrafluoroethylene gas-liquid filter can be used for a long time in any type of acidic or alkaline medium. Polytetrafluoroethylene gas-liquid filter can withstand the corrosion of hydrofluoric acid, phosphoric acid, sulfuric acid, nitric acid, hydrochloric acid, various organic acids, organic solvents, and other highly corrosive chemical media. Even highly corrosive aqua regia (a mixture of concentrated sulfuric acid and concentrated nitric acid) is helpless against it. It is widely used in industries such as aviation, chemical, electronics, bridges, textiles, machinery, papermaking, ceramics, etc. Contact Information Whatsapp:+86-13315865785 Email:estrellayue@ , ofolan.com M.P:+86-13315865785

Minimum Order: 1 bags

Porduct Name PTFE PTFE material woven filter screen mesh Brand PTFE/PVDF Mesh size 0.5-400Mesh 0.3X0.5mm 1X2mm 2X3mm 3X6mm 4X8mm 5X10mm Wire diameter thickness 5.0mm-0.05mm Weaving method Plain weave, twill weave, mat weave Diamond shaped hole, circular hole, square hole, elongated circular hole, hexagonal hole Density 2.2g/cm3 Melting point -200～+250℃℃ Characteristic (1) Chemical stability: Almost all chemical resistances, strong acids, strong bases, and organic solvents do not affect it. (2) Thermal stability: The cracking temperature is above 400 ℃. Therefore, it can operate normally within the temperature range of -200 ℃ to 300 ℃, and can reach up to 250 ° C Suitable for various high-temperature, strong acid, strong alkali chemical fields. (3) Friction reducing properties: PTFE material has an extremely low friction coefficient of only 0.02, which is 1/40 of rubber (4) Self lubrication: The surface of PTFE material has outstanding self-lubricating properties, and almost all viscous substances cannot adhere to its surface.   Appliaction High temperature resistance - operating temperature up to 250 ℃. Low temperature resistance - with good mechanical toughness; Even if the temperature drops to -196 ℃, it can maintain a 5% elongation rate. Corrosion resistance - exhibits inertness towards most chemicals and solvents, and can withstand strong acids, alkalis, water, and various organic solvents. Climate resistance - has an aging life in plastics. High lubrication - is the highest friction coefficient in solid materials. Non adhesive - refers to the small surface tension in solid materials that does not adhere to any substance. Non toxic - physiologically inert, with no adverse reactions when implanted into artificial blood vessels and organs for a long time. The weaving process adopts arrow loom plain weave, diagonal weave, and dense weave, and the weaving mesh can be controlled between 15 mesh and 400 mesh. Polytetrafluoroethylene gas-liquid filter can be used for a long time in any type of acidic or alkaline medium. Polytetrafluoroethylene gas-liquid filter can withstand the corrosion of hydrofluoric acid, phosphoric acid, sulfuric acid, nitric acid, hydrochloric acid, various organic acids, organic solvents, and other highly corrosive chemical media. Even highly corrosive aqua regia (a mixture of concentrated sulfuric acid and concentrated nitric acid) is helpless against it. It is widely used in industries such as aviation, chemical, electronics, bridges, textiles, machinery, papermaking, ceramics, etc. Contact Information Whatsapp:+86-13315865785 Email:estrellayue@ , ofolan.com M.P:+86-13315865785

Minimum Order: 1 bags

Porduct Name 500 mesh PTFE filter screen Brand PTFE/PVDF Mesh size 0.5-400Mesh 0.3X0.5mm 1X2mm 2X3mm 3X6mm 4X8mm 5X10mm Wire diameter thickness 5.0mm-0.05mm Weaving method Plain weave, twill weave, mat weave Diamond shaped hole, circular hole, square hole, elongated circular hole, hexagonal hole Density 2.2g/cm3 Melting point -200～+250℃℃ Characteristic (1) Chemical stability: Almost all chemical resistances, strong acids, strong bases, and organic solvents do not affect it. (2) Thermal stability: The cracking temperature is above 400 ℃. Therefore, it can operate normally within the temperature range of -200 ℃ to 300 ℃, and can reach up to 250 ° C Suitable for various high-temperature, strong acid, strong alkali chemical fields. (3) Friction reducing properties: PTFE material has an extremely low friction coefficient of only 0.02, which is 1/40 of rubber (4) Self lubrication: The surface of PTFE material has outstanding self-lubricating properties, and almost all viscous substances cannot adhere to its surface.   Appliaction High temperature resistance - operating temperature up to 250 ℃. Low temperature resistance - with good mechanical toughness; Even if the temperature drops to -196 ℃, it can maintain a 5% elongation rate. Corrosion resistance - exhibits inertness towards most chemicals and solvents, and can withstand strong acids, alkalis, water, and various organic solvents. Climate resistance - has an aging life in plastics. High lubrication - is the highest friction coefficient in solid materials. Non adhesive - refers to the small surface tension in solid materials that does not adhere to any substance. Non toxic - physiologically inert, with no adverse reactions when implanted into artificial blood vessels and organs for a long time. The weaving process adopts arrow loom plain weave, diagonal weave, and dense weave, and the weaving mesh can be controlled between 15 mesh and 400 mesh. Polytetrafluoroethylene gas-liquid filter can be used for a long time in any type of acidic or alkaline medium. Polytetrafluoroethylene gas-liquid filter can withstand the corrosion of hydrofluoric acid, phosphoric acid, sulfuric acid, nitric acid, hydrochloric acid, various organic acids, organic solvents, and other highly corrosive chemical media. Even highly corrosive aqua regia (a mixture of concentrated sulfuric acid and concentrated nitric acid) is helpless against it. It is widely used in industries such as aviation, chemical, electronics, bridges, textiles, machinery, papermaking, ceramics, etc. Contact Information Whatsapp:+86-13315865785 Email:estrellayue@ , ofolan.com M.P:+86-13315865785

Minimum Order: 1 bags

Porduct Name PTFE gas-liquid filter/demister Brand PTFE/PVDF Mesh size 0.5-400Mesh 0.3X0.5mm 1X2mm 2X3mm 3X6mm 4X8mm 5X10mm Wire diameter thickness 5.0mm-0.05mm Weaving method Plain weave, twill weave, mat weave Diamond shaped hole, circular hole, square hole, elongated circular hole, hexagonal hole Density 2.2g/cm3 Melting point -200～+250℃℃ Characteristic (1) Chemical stability: Almost all chemical resistances, strong acids, strong bases, and organic solvents do not affect it. (2) Thermal stability: The cracking temperature is above 400 ℃. Therefore, it can operate normally within the temperature range of -200 ℃ to 300 ℃, and can reach up to 250 ° C Suitable for various high-temperature, strong acid, strong alkali chemical fields. (3) Friction reducing properties: PTFE material has an extremely low friction coefficient of only 0.02, which is 1/40 of rubber (4) Self lubrication: The surface of PTFE material has outstanding self-lubricating properties, and almost all viscous substances cannot adhere to its surface.   Appliaction High temperature resistance - operating temperature up to 250 ℃. Low temperature resistance - with good mechanical toughness; Even if the temperature drops to -196 ℃, it can maintain a 5% elongation rate. Corrosion resistance - exhibits inertness towards most chemicals and solvents, and can withstand strong acids, alkalis, water, and various organic solvents. Climate resistance - has an aging life in plastics. High lubrication - is the highest friction coefficient in solid materials. Non adhesive - refers to the small surface tension in solid materials that does not adhere to any substance. Non toxic - physiologically inert, with no adverse reactions when implanted into artificial blood vessels and organs for a long time. The weaving process adopts arrow loom plain weave, diagonal weave, and dense weave, and the weaving mesh can be controlled between 15 mesh and 400 mesh. Polytetrafluoroethylene gas-liquid filter can be used for a long time in any type of acidic or alkaline medium. Polytetrafluoroethylene gas-liquid filter can withstand the corrosion of hydrofluoric acid, phosphoric acid, sulfuric acid, nitric acid, hydrochloric acid, various organic acids, organic solvents, and other highly corrosive chemical media. Even highly corrosive aqua regia (a mixture of concentrated sulfuric acid and concentrated nitric acid) is helpless against it. It is widely used in industries such as aviation, chemical, electronics, bridges, textiles, machinery, papermaking, ceramics, etc. Contact Information Whatsapp:+86-13315865785 Email:estrellayue@ , ofolan.com M.P:+86-13315865785

Minimum Order: 1 bags

Porduct Name PTFE diamond shaped stretch mesh Brand PTFE/PVDF Mesh size 0.5-400Mesh 0.3X0.5mm 1X2mm 2X3mm 3X6mm 4X8mm 5X10mm Wire diameter thickness 5.0mm-0.05mm Weaving method Plain weave, twill weave, mat weave Diamond shaped hole, circular hole, square hole, elongated circular hole, hexagonal hole Density 2.2g/cm3 Melting point -200～+250℃℃ Characteristic (1) Chemical stability: Almost all chemical resistances, strong acids, strong bases, and organic solvents do not affect it. (2) Thermal stability: The cracking temperature is above 400 ℃. Therefore, it can operate normally within the temperature range of -200 ℃ to 300 ℃, and can reach up to 250 ° C Suitable for various high-temperature, strong acid, strong alkali chemical fields. (3) Friction reducing properties: PTFE material has an extremely low friction coefficient of only 0.02, which is 1/40 of rubber (4) Self lubrication: The surface of PTFE material has outstanding self-lubricating properties, and almost all viscous substances cannot adhere to its surface.   Appliaction High temperature resistance - operating temperature up to 250 ℃. Low temperature resistance - with good mechanical toughness; Even if the temperature drops to -196 ℃, it can maintain a 5% elongation rate. Corrosion resistance - exhibits inertness towards most chemicals and solvents, and can withstand strong acids, alkalis, water, and various organic solvents. Climate resistance - has an aging life in plastics. High lubrication - is the highest friction coefficient in solid materials. Non adhesive - refers to the small surface tension in solid materials that does not adhere to any substance. Non toxic - physiologically inert, with no adverse reactions when implanted into artificial blood vessels and organs for a long time. The weaving process adopts arrow loom plain weave, diagonal weave, and dense weave, and the weaving mesh can be controlled between 15 mesh and 400 mesh. Polytetrafluoroethylene gas-liquid filter can be used for a long time in any type of acidic or alkaline medium. Polytetrafluoroethylene gas-liquid filter can withstand the corrosion of hydrofluoric acid, phosphoric acid, sulfuric acid, nitric acid, hydrochloric acid, various organic acids, organic solvents, and other highly corrosive chemical media. Even highly corrosive aqua regia (a mixture of concentrated sulfuric acid and concentrated nitric acid) is helpless against it. It is widely used in industries such as aviation, chemical, electronics, bridges, textiles, machinery, papermaking, ceramics, etc. Contact Information Whatsapp:+86-13315865785 Email:estrellayue@ , ofolan.com M.P:+86-13315865785

Minimum Order: 1 bags

Porduct Name PTFE woven filter bag Brand PTFE/PVDF Mesh size 0.5-400Mesh 0.3X0.5mm 1X2mm 2X3mm 3X6mm 4X8mm 5X10mm Wire diameter thickness 5.0mm-0.05mm Weaving method Plain weave, twill weave, mat weave Diamond shaped hole, circular hole, square hole, elongated circular hole, hexagonal hole Density 2.2g/cm3 Melting point -200～+250℃℃ Characteristic (1) Chemical stability: Almost all chemical resistances, strong acids, strong bases, and organic solvents do not affect it. (2) Thermal stability: The cracking temperature is above 400 ℃. Therefore, it can operate normally within the temperature range of -200 ℃ to 300 ℃, and can reach up to 250 ° C Suitable for various high-temperature, strong acid, strong alkali chemical fields. (3) Friction reducing properties: PTFE material has an extremely low friction coefficient of only 0.02, which is 1/40 of rubber (4) Self lubrication: The surface of PTFE material has outstanding self-lubricating properties, and almost all viscous substances cannot adhere to its surface.   Appliaction High temperature resistance - operating temperature up to 250 ℃. Low temperature resistance - with good mechanical toughness; Even if the temperature drops to -196 ℃, it can maintain a 5% elongation rate. Corrosion resistance - exhibits inertness towards most chemicals and solvents, and can withstand strong acids, alkalis, water, and various organic solvents. Climate resistance - has an aging life in plastics. High lubrication - is the highest friction coefficient in solid materials. Non adhesive - refers to the small surface tension in solid materials that does not adhere to any substance. Non toxic - physiologically inert, with no adverse reactions when implanted into artificial blood vessels and organs for a long time. The weaving process adopts arrow loom plain weave, diagonal weave, and dense weave, and the weaving mesh can be controlled between 15 mesh and 400 mesh. Polytetrafluoroethylene gas-liquid filter can be used for a long time in any type of acidic or alkaline medium. Polytetrafluoroethylene gas-liquid filter can withstand the corrosion of hydrofluoric acid, phosphoric acid, sulfuric acid, nitric acid, hydrochloric acid, various organic acids, organic solvents, and other highly corrosive chemical media. Even highly corrosive aqua regia (a mixture of concentrated sulfuric acid and concentrated nitric acid) is helpless against it. It is widely used in industries such as aviation, chemical, electronics, bridges, textiles, machinery, papermaking, ceramics, etc. Contact Information Whatsapp:+86-13315865785 Email:estrellayue@ , ofolan.com M.P:+86-13315865785

Minimum Order: 1 bags

Porduct Name PTFE woven wire mesh Brand PTFE/PVDF Mesh size 0.5-400Mesh 0.3X0.5mm 1X2mm 2X3mm 3X6mm 4X8mm 5X10mm Wire diameter thickness 5.0mm-0.05mm Weaving method Plain weave, twill weave, mat weave Diamond shaped hole, circular hole, square hole, elongated circular hole, hexagonal hole Density 2.2g/cm3 Melting point -200～+250℃℃ Characteristic (1) Chemical stability: Almost all chemical resistances, strong acids, strong bases, and organic solvents do not affect it. (2) Thermal stability: The cracking temperature is above 400 ℃. Therefore, it can operate normally within the temperature range of -200 ℃ to 300 ℃, and can reach up to 250 ° C Suitable for various high-temperature, strong acid, strong alkali chemical fields. (3) Friction reducing properties: PTFE material has an extremely low friction coefficient of only 0.02, which is 1/40 of rubber (4) Self lubrication: The surface of PTFE material has outstanding self-lubricating properties, and almost all viscous substances cannot adhere to its surface.   Appliaction High temperature resistance - operating temperature up to 250 ℃. Low temperature resistance - with good mechanical toughness; Even if the temperature drops to -196 ℃, it can maintain a 5% elongation rate. Corrosion resistance - exhibits inertness towards most chemicals and solvents, and can withstand strong acids, alkalis, water, and various organic solvents. Climate resistance - has an aging life in plastics. High lubrication - is the highest friction coefficient in solid materials. Non adhesive - refers to the small surface tension in solid materials that does not adhere to any substance. Non toxic - physiologically inert, with no adverse reactions when implanted into artificial blood vessels and organs for a long time. The weaving process adopts arrow loom plain weave, diagonal weave, and dense weave, and the weaving mesh can be controlled between 15 mesh and 400 mesh. Polytetrafluoroethylene gas-liquid filter can be used for a long time in any type of acidic or alkaline medium. Polytetrafluoroethylene gas-liquid filter can withstand the corrosion of hydrofluoric acid, phosphoric acid, sulfuric acid, nitric acid, hydrochloric acid, various organic acids, organic solvents, and other highly corrosive chemical media. Even highly corrosive aqua regia (a mixture of concentrated sulfuric acid and concentrated nitric acid) is helpless against it. It is widely used in industries such as aviation, chemical, electronics, bridges, textiles, machinery, papermaking, ceramics, etc. Contact Information Whatsapp:+86-13315865785 Email:estrellayue@ , ofolan.com M.P:+86-13315865785

Minimum Order: 1 bags

Product Name:S32760 Duplex Stainless Steel Mesh Material： High quality stainless steel wire SUS304309316L317L904L(super stainless steel mesh)2205/2507(duplex stainless steel meshS31254254SMO)Carpenter20 etc. Weaving method: Plain weave, twill weave, dense weave, five-harness weave, embossed weave Features： The processed stainless steel wire mesh has the characteristics of high wear resistance, long service life, precise mesh, uniform structure, no curling, easy to use, uniform screen thickness, anti-static, acid and alkali resistance, corrosion resistance, and acid and alkali resistance, temperature resistance, wear resistance and other properties. Therefore, in recent years, stainless steel mesh has been widely used in coal mining, petroleum, chemical industry, food, medicine, machinery manufacturing and other industries as mine screens. Purpose： Stainless steel wire mesh is mainly used for screening and filtering in acidic and alkaline environments. It is mainly used as a mud mesh in the petroleum industry, a screen mesh in the chemical and chemical fiber industry, and a pickling mesh in the electroplating industry. Contact Information: Whastapp:+86-13315865785 Email: , estrellayue@ofolan.com M.P:+86-13315865785

Minimum Order: 1 bags

Product Name:S32750 Duplex Stainless Steel Mesh Material： High quality stainless steel wire SUS304309316L317L904L(super stainless steel mesh)2205/2507(duplex stainless steel meshS31254254SMO)Carpenter20 etc. Weaving method: Plain weave, twill weave, dense weave, five-harness weave, embossed weave Features： The processed stainless steel wire mesh has the characteristics of high wear resistance, long service life, precise mesh, uniform structure, no curling, easy to use, uniform screen thickness, anti-static, acid and alkali resistance, corrosion resistance, and acid and alkali resistance, temperature resistance, wear resistance and other properties. Therefore, in recent years, stainless steel mesh has been widely used in coal mining, petroleum, chemical industry, food, medicine, machinery manufacturing and other industries as mine screens. Purpose： Stainless steel wire mesh is mainly used for screening and filtering in acidic and alkaline environments. It is mainly used as a mud mesh in the petroleum industry, a screen mesh in the chemical and chemical fiber industry, and a pickling mesh in the electroplating industry. Contact Information: Whastapp:+86-13315865785 Email: , estrellayue@ofolan.com M.P:+86-13315865785

Minimum Order: 1 bags

Product Name:S31803 Duplex Stainless Steel Mesh Material： High quality stainless steel wire SUS304309316L317L904L(super stainless steel mesh)2205/2507(duplex stainless steel meshS31254254SMO)Carpenter20 etc. Weaving method: Plain weave, twill weave, dense weave, five-harness weave, embossed weave Features： The processed stainless steel wire mesh has the characteristics of high wear resistance, long service life, precise mesh, uniform structure, no curling, easy to use, uniform screen thickness, anti-static, acid and alkali resistance, corrosion resistance, and acid and alkali resistance, temperature resistance, wear resistance and other properties. Therefore, in recent years, stainless steel mesh has been widely used in coal mining, petroleum, chemical industry, food, medicine, machinery manufacturing and other industries as mine screens. Purpose： Stainless steel wire mesh is mainly used for screening and filtering in acidic and alkaline environments. It is mainly used as a mud mesh in the petroleum industry, a screen mesh in the chemical and chemical fiber industry, and a pickling mesh in the electroplating industry. Contact Information: Whastapp:+86-13315865785 Email: , estrellayue@ofolan.com M.P:+86-13315865785

Minimum Order: 1 bags

Product Name:S31254 Super Stainless Steel Mesh Material： High quality stainless steel wire SUS304309316L317L904L(super stainless steel mesh)2205/2507(duplex stainless steel meshS31254254SMO)Carpenter20 etc. Weaving method: Plain weave, twill weave, dense weave, five-harness weave, embossed weave Features： The processed stainless steel wire mesh has the characteristics of high wear resistance, long service life, precise mesh, uniform structure, no curling, easy to use, uniform screen thickness, anti-static, acid and alkali resistance, corrosion resistance, and acid and alkali resistance, temperature resistance, wear resistance and other properties. Therefore, in recent years, stainless steel mesh has been widely used in coal mining, petroleum, chemical industry, food, medicine, machinery manufacturing and other industries as mine screens. Purpose： Stainless steel wire mesh is mainly used for screening and filtering in acidic and alkaline environments. It is mainly used as a mud mesh in the petroleum industry, a screen mesh in the chemical and chemical fiber industry, and a pickling mesh in the electroplating industry. Contact Information: Whastapp:+86-13315865785 Email: , estrellayue@ofolan.com M.P:+86-13315865785

Minimum Order: 1 bags