Minerals & Metals

Metal spinning is a metal processing process that deforms metal materials by rotating the workpiece and applying local pressure to obtain parts of the desired shape and size. Spinning process classification According to the deformation method, it is divided into ordinary spinning, strong spinning and shrinking spinning. Ordinary spinning uses the spinning wheel to roll and pressurize along the surface of the workpiece to gradually deform the workpiece, which is suitable for processing thin-walled parts. Strong spinning increases the spinning force and reduces the contact area between the spinning wheel and the workpiece, so that the material produces a larger deformation in a smaller deformation area, which can improve material utilization and part strength.

In the context of pursuing efficient production and energy conservation and environmental protection, the Stationary Type Pedestal Breaker Boom System stands out as an expert in efficient and energy-saving crushing, bringing new solutions to many industries.Below is a detailed introduction to the BB350 model's Stationary Type Pedestal Breaker Boom System. Main parameters of BB350 Pedestal Rockbreaker： Model No.BB350 Boom weight(without hammer)：3168kg Max horizontal working radius： 6000mm Max.vertical working radius： 3950mm Min.vertical working radius： 1860mm Max.Height： 3250mm The BB350 model's Stationary Type Pedestal Breaker Boom System adopts advanced hydraulic drive technology, hydraulic vibration crushing, good noise reduction effect, and reduces noise pollution during operation. At the same time, driven by efficient motors, it is clean and energy-saving, reducing energy consumption costs by more than 60% compared to traditional diesel equipment, saving a lot of energy expenses for enterprises and in line with the concept of sustainable development. In terms of crushing efficiency, the BB350 model's Stationary Type Pedestal Breaker Boom System is equipped with high-quality hydraulic breakers, significantly improving work efficiency. The whole machine has undergone system integration optimization design, with better performance, high maintainability, and a failure rate reduced by 85% compared to traditional diesel equipment, greatly reducing equipment downtime, ensuring production continuity, and improving the production efficiency of the enterprise. The intelligent control function of the BB350 model's Stationary Type Pedestal Breaker Boom System is also very powerful, adopting a diversified intelligent control method of video surveillance and remote control, with a remote control distance of up to 10-20km. Configure high-performance controllers to achieve multi parameter fusion, flexible control, and fixed-point positioning. Operators can accurately control the equipment from a safe distance, which not only improves the convenience of operation but also enhances the safety of work. The BB350 model's Stationary Type Pedestal Breaker Boom System also has high adaptability, with multiple functions and can be equipped with various front- end tools such as digging buckets, mechanical grippers, hydraulic shears, etc. By replacing the top attachments, different operational functions can be achieved to meet diverse production needs. Its modular design can quickly adapt to different customer needs, and can work stably for a long time even in harsh environments such as corrosion, explosion prevention, and high altitude. In addition, the BB350 model's Stationary Type Pedestal Breaker Boom System has reliable quality and is equipped with a high-performance shock absorption system to reduce the damage of impact loads to the entire machine and foundation structure. The core components adopt international brand configuration, with a brand new simulation optimized design, reasonable layout, high safety factor, and meet the requirements of uninterrupted operation. Purchase Notice: Warranty period: 1 year After sales service: During the warranty period, if there are quality issues, we will be available on call Transportation methods: Various transportation methods are accepted Packaging method: Suitable for various types of transportation

Minimum Order: 1 bags

Expanded metal mesh is a mesh material formed by cutting and stretching metal sheets (usually steel sheets). It has the characteristics of high strength, light weight and versatility, and is widely used in construction, industry, transportation and decoration. Expanded metal mesh is also called expanded mesh or stretched mesh. Production process: The whole metal plate is formed in one step through punching, shearing and stretching processes, without welding points, and the structure is stable. The mesh shape is usually rhombus, and can also be customized into hexagons or other shapes.

Stretched metal mesh is a mesh material formed by cutting and stretching a whole metal plate. Its characteristic is that it is not welded or woven, but through a one-time punching and stretching process, the metal plate is formed into a structure with regular mesh holes. This processing method makes it stronger, lighter, and has good ventilation, light transmission and anti-slip properties. Characteristics No welding points, high strength: Because it is stretched from a whole metal plate, there is no welding, the structure is more solid and has high tensile strength. Light weight, saving materials: Compared with traditional metal plates, stretched mesh reduces the amount of materials used and reduces weight while maintaining strength. Ventilation and light transmission: Due to its mesh structure, it can achieve good air circulation and light transmission, suitable for ventilation systems and decorative purposes.

Fisheye Hole Skid Plate is an anti-skid plate with a special surface texture design. Its surface shape is similar to the round convex structure of a fish eye. This unique design significantly increases surface friction, reducing the risk of slips and falls. The surface of the Fisheye Hole Skid Plate has round protrusions similar to fisheyes. This structure can effectively increase the contact area with the soles of feet, shoe soles or other objects, thereby enhancing friction and avoiding slipping accidents. High friction: The fisheye-shaped protrusions provide more contact points, resulting in a higher friction coefficient, which can provide better anti-slip effects, especially in slippery environments such as wet, cold, greasy, etc.

The perforated composite sintered mesh filter element adopts a multi-layer design, which can remove particles of different sizes step by step, has higher filtration accuracy, and can effectively improve the filtration effect. High strength and pressure resistance: Due to the use of metal materials and the reinforcement of the structure through the sintering process, this filter element has strong pressure resistance and is suitable for high flow rate or high pressure environment. High temperature resistance and corrosion resistance: Sintered metal mesh has good high temperature resistance, and some filter elements can work stably at high temperature (for example, up to 500℃ or higher). At the same time, metal materials usually have strong corrosion resistance and are suitable for use in harsh environments.

1. The continuous gap greatly increases the water flow area, so it has better contact with the aquifer. 2. The V-shaped profile structure avoids blockage, ensures smooth flow, and the continuous gap can be used effectively for a long time. 3. The trapezoidal filter pipe has a strong structure, high porosity, precise gap size, easy backwashing, long service life, safe and reliable. Application Wedge Wire Screen Tube can be used with deep well pumps and submersible pumps, and can also be used in water treatment equipment, environmental protection, desalination of seawater into industrial water and domestic water, tap water treatment, water softening treatment, and petrochemical industry.

We are the original supplier of mining locomotive and its spareparts, we could provide you with the online visit of our factory! Battery electric locomotive is a kind of track traction equipment powered by batteries, which is generally used in mines. There are two types of battery electric locomotives, explosion-proof type and ordinary type. The explosion- proof type is mainly used in coal mines. There are also many options in terms of speed regulation and braking methods. Speed control methods include resistance speed control, chopping speed control and frequency conversion speed control. Braking methods include pure mechanical braking, hydraulic braking and compressed air braking. In addition, electric braking can also be selected as an auxiliary braking method. Total weight (t) : 2.5 Track gauge (mm) : 600,762 or 900 Traction (KN) : 2.55 Max. Traction (KN) : 6.13 Speed(km/h) : 4.54 Battery Voltage (V) : 48 Battery Capacity (Ah) : 330 Power (KW) : 3.5*1 Dimensions Length(mm) : 2360 Width(mm) : 914,1076 or 1214 Height(mm) : 1550 Wheelbase (mm) : 650 Wheel diameter (mm) : 460 Min Curve radius (m) : 5 Controller : Resistance or IGBT Braking method : Mechanical Brake Advantages of our product 1.Using high-quality steel plates, special rust removal process make sure it more anti-corrosion and suitable for harsh mining environment. 2. Producing motors ourselves, using high lever insulation material and pure copper, ensure the powerful traction force, and suitable for harsh mining environment. 3.Gear anastomosis surface to reach more than 80%, which is far more exceeding the standard. 4.Professionally designed and adjusted frame ensure safe driving and avoids falling off rails. 5.A variety of braking methods can be choose, air brake, hydraulic brake, electric brake, mechanical brake to ensure the safety drive. 6. 40 years richful experience with the ability to design and make customized product according to your requirements. 7. Proving factory online-visiting Product Factory Test Mining Locomotive test 1.Before Running the locomotive,carry out gear debugging, lighting, gear, and brake adjustment etc.To ensure the normal operation of the locomotive. 2.Carry out a tensile test before leaving the factory to ensure the load performance of the locomotive meets the standard. Our design standards generally exceed the national standard by 10%-20%. 3.Carry out different type running test before leaving the factory to ensure the performance and normal operation of the whole locomotive. It can adapt to various harsh conditions under simulated working conditions. Motor test The motor has to go through many inspection procedures before leaving the factory, and each motor has to be carried out with load running experiments. Explosion-proof motors are carried out with water pressure test. All the test of motor is to ensure that can adapt to harsh working conditions. Clients Feedback and Cases 1. A good feedback of our lithium battery locomotive from a client of Latin America 2. In order to solve the exist problems of lead-acid batteries. More than 30 lead-acid battery electric locomotives in this large mining were changed into lithium battery electric locomotives, which improved the work enthusiasm and production efficiency of employees, reduced costs,and more environment- friendly. 3. The mining rock drill car designed by Sunward Co., has a small size and simple structure, so the space for placing the lithium battery on the body is very limited. According to the limitation size, our company design a lithium power supply power plan, which perfectly solves the problem of lithium power supply space. In order to adapt to the special industrial and mining environment and improve transportation efficiency, a batch of 2.5-ton lithium battery electric locomotives are designed to Myanmar Clients. FAQ What's your product advantages? We have more 40 years experience in this field so that we could design or produce the locomotive as your requirement. We could also provide online service to teach you how to operate and maintain the locomotive. The most important thing that we produce the main part of the locomotive- The traction motors. we could guarante the power of the locomotive. Pre-sales Service: The wide product range enables us to provide our customers with individual machines or complete processing plants. Based on our customer's request and budget, our experts make efficient and reliable solutions, and we produce strictly follow customers' order. What's more, every customer has the chance to visit the working machine in the site before placing the order. After-sales Service: Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the quarry site to help install the customer's plants.Necessary training about machine daily maintenance to local workers is provided also. Methods of Payment: T/T (Telegraphic Transfer) or Western Union or L/C at sight Handling time for an order: Within 10 days supplied from stock Shipping method: Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or by air Bulk order: we suggest by air or by sea. Quality Control: We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. After Services: a. Our sales team will response for your question within 24 hours (Holiday is Excluded) b. Technical Support will be available in any time c. Free replacement will provide once the failure confirmed caused by our product quality

Minimum Order: 1 bags

4K108 We provide CAD or PCB board proofing, sample customization, small batch CNC processing. We can select various types of metal plates as raw materials according to customer requirements, encrypt the manufacturing, customize according to the drawing size, with small error, and can customize various shapes and sizes according to customer requirements, with a wider application (housing of computer peripheral products).

MINI102 We provide CAD or PCB board proofing, sample customization, small batch CNC processing. We can select various types of metal plates as raw materials according to customer requirements, encrypt the manufacturing, customize according to the drawing size, with small error, and can customize various shapes and sizes according to customer requirements, with a wider application (housing of computer peripheral products).

Steel tube collar is a popular Model that widely used in the decoration of wrought iron railings, it’s made of steel tube by stamping, The production cycle of stamping parts is short, and the production efficiency is relatively high. This can not only reduce manufacturing costs, but also improve production capacity, and also help enterprises to enhance market competitiveness.  Steel tube collar is with several shape for customer choosing, due to it’s lower prices and fast delivery time, welcomed by customers from all over the world. Besides stamped steel tube collar, we also produce stamped leaves, stamped flowers, have various patterns and sizes, if you are looking for some decorative iron ornaments, you can purchase from us by one-stop.  Specification Product Name Stamped Steel Tube Stud  Type   Decorative ornaments  Mateiral  Steel  Size 1/2" 155x30mm  Packing  In pallets  Feature various patterns can be chosen, easy to be welded, widely used in wrought iron fence&gate, staircase railing, balcony railing.  Usage Balcony railing, stiarcase railing, Wrought iron fence and gate decoration

Wrought iron work is the technique of transforming wrought and cast iron into works of art. Through iron technology, iron gates, iron guardrail, and indoor iron ornaments can be made. With its traditional art decoration style, wrought iron ornaments are widely used in architectural exterior decoration, interior decoration, furniture decoration and environmental decoration. Because of its distinctive characteristics, simple style, economical and practical and simple technology, it occupies a place in modern decoration. In interior decoration, wrought iron decorations can be used to make a variety of furniture, such as wrought iron bedside tables, wrought iron bookshelves, etc. These decorations are not only beautiful, but also have practical functions, which can meet the needs of People's Daily life. With its unique design and beautiful appearance, iron ornaments have become an indispensable part of modern home decoration. We have kinds of wrought iron components to choose, with kinds of patterns and sizes, including wrought iron balusters, wrought iron panels, wrought iron flowers and so on, to meet requests from different customers. 

We provide CAD or PCB board proofing, sample customization, small batch CNC processing. We can select various types of metal plates as raw materials according to customer requirements, encrypt the manufacturing, customize according to the drawing size, with small error, and can customize various shapes and sizes according to customer requirements, with a wider application (housing of computer peripheral products).

Cast steel ornaments perform well in the manufacture of handicrafts and ornaments. With its unique molding process and stable product size, cast steel ornaments are favored in the market. The characteristics of its beautiful molding and exquisite details make the cast steel decoration win the love of consumers in home decoration and art production. Cast steel ornaments are mainly used for wrought iron fence and gate decoration, with kinds of styles to choose, these ornaments makes the gate and fence more beautiful. Besides, cast steel is easy to be welded together with the gate, fence or railing. Shijaizhuang Kubiao has sorts of options to choose, including cast steel leaves, cast steel flowers, cast steel decorations, including kinds of style and sizes, we can also make new moulds according to the style from Customer.