Machinery & Parts

Cast aluminum-magnesium alloy Category:Aluminum alloy casting Cast Aluminum-magnesium alloy are widely used in the fields of electronics, automobiles, and aerospace. Common grades are 7A09 etc. The main elements of aluminum-magnesium alloy include aluminum and magnesium. The alloy products have high strength, low density and strong heat dissipation capacity, so they are popular in the fields of electronics, automobiles, and aerospace. Common grades are 5052, 5754, 5083, etc. Aluminum alloys have lower cost, superior performance and stronger product competitiveness. The density of aluminum-magnesium alloy is small, so it is lighter under the same volume, and has a certain strength, which can be used for load-bearing. Aluminum-magnesium alloy has strong heat dissipation, and at the same time, it can resist electromagnetic interference and has strong electromagnetic shielding. Its appearance has a certain degree of beauty, is resistant to corrosion, can maintain a good quality of appearance for a long time, and the material is environmentally friendly, and the waste is recyclable. https://www.foundryseiko.com

Minimum Order: 1000

Category:Aluminum alloy casting Cast Aluminum-copper alloy can be made into forgings, aerospace structural parts, machined products, and more. Common grades are ZL202 and so on. Cast Aluminum-copper alloy belong to 2xx, x series aluminum alloys, and also belong to ZL-2xx aluminum alloys. Heat resistance, high strength.Can be used for high-power equipment packaging materials, heat dissipation components, ceramics and bases, etc. Aluminum-copper alloy is a kind of hard alloy material, and it also has good electrical conductivity. It has high mechanical properties at room temperature and high temperature, and is easy to cast and cut. We can cast 2011, 2024, 2218, 2618 and other different aluminum-copper alloy products. Aluminum-copper alloys are easy to process and can be made into different profiles. Aluminum-copper alloys are usually made of aluminum-copper multi- component alloys by adding a small amount of other elements to meet the application of aluminum-copper alloys in industry, so that they can be used in different environments. Aluminum-copper alloys can replace copper wires as wires in some cases, and can also be used as aerospace structural parts and so on. https://www.foundryseiko.com

Minimum Order: 1000

Category:Copper alloy casting Copper casting, the copper appears rose red as a whole, and after an oxide film is formed on the surface, it appears purple, so it also called red copper.Copper is often used for electrical, thermal, and corrosion-resistant components. Red copper is also called industrial pure copper. Its appearance is purple, so it is also called red copper. It has good electrical conductivity and thermal conductivity, as well as good plasticity and easy processing. We can produce different grades of copper products such as T1, T2, T3. Red copper is not completely pure copper. Generally, some other elements are added to improve the material properties of the product. Red copper products have good electrical conductivity, so they are widely used in the production of electrical and thermal conductivity equipment, such as motor short-circuit rings, electromagnetic heating inductors, etc. In addition, red copper has good welding performance and can be processed for secondary processing. https://www.foundryseiko.com

Minimum Order: 1 bags

Hot Sale 3 Ton Mining Trolley Electric Locomotive Trolley electric locomotive is a kind of rail transportation traction equipment, powered by transformers and overhead lines. Mainly used in mines where there is no risk of explosion. Because of its special power supply mode, the trolley electric locomotive has no limit on the cruising range. Therefore, it is suitable for long-term and long-distance use. There are also many options in terms of speed regulation and braking methods. Speed control methods include resistance speed control, chopping speed control and frequency conversion speed control. Braking methods include pure mechanical braking, hydraulic braking and compressed air braking. In addition, electric braking can also be selected as an auxiliary braking method. Adhesive / total weight (t) : 3 ton Track gauge (mm) : 600.762.900 Traction (KN) : 6.1 5.74 Max. Traction (KN) : 7.36 Speed(km/h) : 10.6 7.5 Power (KW) : 12KWx1 6.5KWX2 Dimensions Length(mm) : 2700 2750 Width(mm) : 940,1102 or 1240 Height(mm) : 1550 1500 Wheelbase (mm) : 816 850 Wheel diameter (mm) : 650 850 Min Curve radius (m) : 5.7 6 Controller : Resistencia or IGBT Braking method : Mechanical Detailed Photos Advantages of our product 1.Using high-quality steel plates, special rust removal process make sure it more anti-corrosion and suitable for harsh mining environment. 2. Producing motors ourselves, using high lever insulation material and pure copper, ensure the powerful traction force, and suitable for harsh mining environment. 3.Gear anastomosis surface to reach more than 80%, which is far more exceeding the standard. 4.Professionally designed and adjusted frame ensure safe driving and avoids falling off rails. 5.A variety of braking methods can be choose, air brake, hydraulic brake, electric brake, mechanical brake to ensure the safety drive. 6. 40 years richful experience with the ability to design and make customized product according to your requirements. 7. Proving factory online-visiting Factory Test Mining Locomotive test 1.Before Running the locomotive,carry out gear debugging, lighting, gear, and brake adjustment etc.To ensure the normal operation of the locomotive. 2.Carry out a tensile test before leaving the factory to ensure the load performance of the locomotive meets the standard. Our design standards generally exceed the national standard by 10%-20%. 3.Carry out different type running test before leaving the factory to ensure the performance and normal operation of the whole locomotive. It can adapt to various harsh conditions under simulated working conditions. Motor test The motor has to go through many inspection procedures before leaving the factory, and each motor has to be carried out with load running experiments. Explosion-proof motors are carried out with water pressure test. All the test of motor is to ensure that can adapt to harsh working conditions. Cases 1. A good feedback of our lithium battery locomotive from a client of Latin America 2. In order to solve the exist problems of lead-acid batteries. More than 30 lead-acid battery electric locomotives in this large mining were changed into lithium battery electric locomotives, which improved the work enthusiasm and production efficiency of employees, reduced costs,and more environment- friendly. 3. The mining rock drill car designed by Sunward Co., has a small size and simple structure, so the space for placing the lithium battery on the body is very limited. According to the limitation size, our company design a lithium power supply power plan, which perfectly solves the problem of lithium power supply space. In order to adapt to the special industrial and mining environment and improve transportation efficiency, a batch of 2.5-ton lithium battery electric locomotives are designed to Myanmar Clients. FAQ What's your product advantages? We have more 40 years experience in this field so that we could design or produce the locomotive as your requirement. We could also provide online service to teach you how to operate and maintain the locomotive. The most important thing that we produce the main part of the locomotive- The traction motors. we could guarantee the power of the locomotive. 1.Pre-sales Service: The wide product range enables us to provide our customers with individual machines or complete processing plants. Based on our customer's request and budget, our experts make efficient and reliable solutions, and we produce strictly follow customers' order. What's more, every customer has the chance to visit the working machine in the site before placing the order. 2.After-sales Service: Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the quarry site to help install the customer's plants.Necessary training about machine daily maintenance to local workers is provided also. 3.Methods of Payment: T/T (Telegraphic Transfer) or Western Union or L/C at sight Handling time for an order: Within 10 days supplied from stock 4.Shipping method: Sample order: we suggest Courier express like DHL/UPS/FEDEX or by air Bulk order: we suggest by air or by sea. 5.Quality Control: We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 6.After Services: a. Our sales team will response for your question within 24 hours (Holiday is Excluded) b. Technical Support will be available in any time c. Free replacement will provide once the failure confirmed caused by our product quality

Minimum Order: 1 bags

Category:Copper alloy casting Brass casting refers to the use of brass as a raw material and casting into castings that can be used in different fields. Common grades are C2100, C2200 and so on. An alloy generally composed of copper and zinc, known as brass, has a golden yellow appearance. Some other elements can be added to brass to produce special brass that works in different environments. Generally, the hardness and cutting performance of brass products are very good, so they can be processed into different and more refined products. Brass has a small crystallization temperature interval and has better casting properties. Compared with tin bronze, cast brass has better mechanical properties. In addition, the zinc contained in brass leads to lower cost of brass, but also because of The presence of zinc makes cast brass have poor corrosion resistance, and other elements are usually added to brass to enable brass to have some other properties to adapt to work in different environments. https://www.foundryseiko.com

Minimum Order: 100

Polyamide 6 reinforced with 45% Glass Fibers that is PA GF45, medium viscosity and dimensional stability, this PA6 plastic material has excellent rigidity and high tensile and compressive strength successfully applying to engineering structure parts of mechanical engineering and in the automotive industry.  Typical Application of PA6 GF45 (A1011I) PA6 GF45 is used in turbines, propellers, screws, nuts, washers and other components with high rigidity and dimensional stability and heat-resistant aging, as well as fishing tackle reels, racket frames and other components with high mechanical strength, good toughness, higher tensile and compressive strength. Other Details of PA6 GF45 (A1011I) Physical Property Ash                     (15.0% 1 ISO3451/1) Conditioned 600°C*2h Density (1250Kg/m3 1 ISO1183) Conditioned 23°C Shrinkage Parallel Flow (0.5-0.7 % 1 ISO294-4) Shrinkage Vertical Flow (0.7-1.1% I ISO294-4) Mechanical Properties Tensile strength (125.0MPa 1 ISO527) Conditioned 5mm/ min Tensile Strain at Break (2.5% I ISO527) Conditioned 1.0J Notched Impact Strength (125 0MPa I ISO527) Conditioned 2mm/min Flexural Strength (190MPa 1ISO178) Conditioned 2mm/min Flexural Modulus (5700 MPa I ISO178) Conditioned 5mm/ min Thermal Property Melting Point (220°C I ISO11357) Hot Deformation Temperature (175*C I ISO75) Conditioned 1.8MPa Flammability Class (HB 1UL94) Conditioned mm Injection Molding Conditions Drying Temperature 130°C Drying Time 3h Cylinder Temperature 240-260°C Nozzle Temperature 240-260*C Tooling Temperature 80*C * Molding conditions are just for reference, please make an adjustment based on the actual situation！ As one of engineering plastic manufacturers, Anmei provides pa6 plastic material, modified polyolefin, master batches and etc. For more information, please feel free to contact us!

Minimum Order: 1000

Specification： Material: black wire, spring steel wire, manganese steel wire and stainless steel wire. Surface treatment: galvanized or painted. Wire diameter: 0.71mm - 12.5mm. Mesh size: 1mm - 100mm. Hole type: square, rectangular and long slot. Weaving type: Plain weave, Pre-crimped, Flat top, Intermediate crimped , Lock crimped. Description： Woven Wire Mesh is manufactured from manganese steel wire, galvanized wire or stainless steel wire. The wires are woven into square, rectangular or long slot meshes.Woven vibrating screen mesh has various weaving types, such as plain weave, pre-crimped weave, flat top, intermediate crimped and lock crimped. Various weaving types can fit different vibrating screens and materials.Woven wire screen is also called quarry/mining screen mesh, screening media, which is widely used in vibrating, scalping and sizing materials of rock, stone, asphalt,quarry,aggregate, limestone, graint etc. Hook Type: Bending. Welding. Metal sheet hook. (C type or U type). Features: High tensile strength. Abrasion and wear resistance. Impact resistance. Acid and alkali resistance. Various weaving types to fit different materials. Different hook types for easy installation and fixation. Application: The woven vibrating screen mesh is widely used in the vibrating screens, crushers and trommel screens. Woven vibrating screen mesh can be used for screening and separating stones, coal, mining, gravel, sand and any other materials. More details contact us: Huatao Group - Tufflex Screen www.tufflexscreen.com /www(dot)tufflexscreen(dot)com Email: maple@huataogroup.com maple(at)huataogroup(dot)com Tel: 0086 0311 80690567 Mob: 0086 181 0331 7488

Minimum Order: 1 bags

Side scraper reclaimer is widely used in cement, building material, coal, power, metallurgy chemical and other industries, it can homogenize a variety of materials, such as bauxite, clay, iron ore, raw coal and other materials with different types and densities, and preblending them in the same stockyard to meet the requirements of different working conditions. Thus, the production process and operation of users are simplified, the technical and economic indexes are improved, and greater economic benefits are obtained. The side scraper reclaimer products of our company have been updated several times. Its arm length range is 11-36m, and the reclaiming capacity range is 30-700t / h. The equipment has unattended function, and the stockyard can realize one key pile change. This equipment has strong adaptability to materials, especially the reclaiming function of side scraper can fundamentally solve the problem of scraping sticky and wet materials. Structure The side scraper reclaimer is mainly composed of walking end beam, frame, winch system, scraper reclaiming system, support frame, lubrication system, track system control room and other components. Technical features ·Adopt advanced design methods, such as computer-aided design, three- dimensional design and optimization design of steel structure. Absorbing advanced technology, together with the experience of designing and manufacturing stacker reclaimer and continuous summary and improvement, we can achieve advanced and reasonable technology and reliable equipment use in the design. ·Advanced production equipment and technological means are adopted to ensure that, for example, the steel pretreatment production line can ensure the improvement of the quality and corrosion resistance of the manufactured products, and the use of large milling and boring machines improves the processing quality of large parts. The whole assembly of large components is performed in the factory, the driving part is tested in the factory, and the rotary part is made by mold. ·Use new materials, such as wear-resistant materials and composite materials. ·External accessories adopt advanced products at domestic and abroad. ·The equipment is provided with various protective measures. ·Advanced testing means and strict quality management system. Product Features · Reliability due to the strict enforcement of design requirement and perfect process technology. · Meet the technology requirements. Adopt advanced design methods, such as CAD, 3D and optimization design of steel structure. · Advancement. The equipment can be fully automated for stacking operations, thus being a highly automated product.

Minimum Order: 1 bags

Customized Stainless Steel Parts Casting Steel Parts For Machinery Precision CNC machining stainless steel-SUS machine parts are becoming the choice for application in many industries due to stainless steel’s excellent physical properties. Stainless steel is one of the most popular industrial alloys for many CNC machining projects. The following benefits have made stainless steel machine parts and products a viable choice for many industries and applications, although they are particularly favored in the medical field. automotive, aerospace, healthcare and consumer electronics. Currently, the best and fastest way to create stainless steel products is CNC machining, especially CNC milling with stainless steel that can reach far and wide. Product Name OEM Custom High Precision Stainless Steel Parts CNC Turning Mechanical Component Material stainless steel, aluminum, copper, iron, PE, PVC, ABS, etc. Surface Treatment Polishing, general/hard oxidation/oxidation, surface chamfering, tempering, , etc. Tolerance丨Surface Roughness +/-0.005 - 0.01mm(Custonize avaiable)丨Ra0.2 - Ra3.2(Custonize avaiable) Technics Turning, Milling, CNC center Drawing Formats PRO/E, Auto CAD, Solid Works , UG, CAD / CAM / CAE, PDF Sample Need to pay sample fee Main Materials Aluminum Al6061, Al6063, Al6082, Al7075, Al2024, Al5052, A380, etc. Stainless Steel SS201,SS301,SS303, SS304, SS316, SS416, etc. Steel Mild Steel, Carbon Steel, 4140, 4340, Q235, Q345B, 20#, 45#, etc. Brass C35600, C36000, C37700, C37000, C37100, C28000, C26000, C24000, C22000, etc. Copper C11000, C12000, C12200, C10100, etc. Iron 20#, 45#, Q235, Q345, Q3458, 1214, 12L14, 1215, etc. Plastic POM, Peek, PMMA, ABS, Delrin, Nylon, PVC, PP, PC, etc Surface Treatment Stainless Steel Brushed and Polishing, Passivating, Sandblasting, Laser engraving, Gold Plating Etc. Steel Zinc plating, Oxide black, Nickel plating, Chrome plating, Carburized, Powder Coated Aluminum Parts Clear Anodized, Color Anodized, Sandblast Anodized, Chemical Film, Brushing, Polishing, Powder Coated, Nickel Plated Etc. Plastic Plating gold (ABS), Painting, Brushing (Acrylic), laser engraving

Our Laser Cutting Metal Services Our team of CNC metal laser cutting experts produces custom parts, complex shapes and detailed cuts of sheet metal. The metals we use range from rare metals like copper and brass to more common metals Our laser cutting systems utilize state-of-the-art metal cutting technology. Our metal laser cutting systems combine speed and accuracy to quickly create custom designs. That's why we rely on the manufacture of custom industrial parts and components - from small gears to industrial equipment When it comes to getting your laser cut metal projects right, we ensure quality and accuracy by: Comprehensive pre-production consulting, analysis and data review Direct communication between customers and laser technicians Strict quality assurance process Output "on target" guarantee for final metal product

12 ton mining accumulator locomotive powered by lithium battery Battery electric locomotive is a kind of track traction equipment powered by batteries, which is generally used in mines. There are two types of battery electric locomotives, explosion-proof type and ordinary type. The explosion- proof type is mainly used in coal mines. There are also many options in terms of speed regulation and braking methods. Speed control methods include resistance speed control, chopping speed control and frequency conversion speed control. Braking methods include pure mechanical braking, hydraulic braking and compressed air braking. In addition, electric braking can also be selected as an auxiliary braking method. Adhesive / total weight (t) : 12 ton Track gauge (mm) : 600.762.900 Traction (KN) : 16.48 Max. Traction (KN) : 29.43 Speed(km/h) : 8.7 Battery Voltage (V) : 192V Battery Capacity (Ah) : 560 Power (KW) : 22 KWx2 Dimensions Length(mm) : 5100 Width(mm) : 1050,1212or 1350 Height(mm) : 1800 Wheelbase (mm) : 1220 Wheel diameter (mm) : 680 Min Curve radius (m) : 10 Controller : Resistencia or IGBT Braking method : Mechanical

Minimum Order: 1 bags

The vertical quenching furnace is mainly used in smelting or melting all kinds of metal. That include iron, steel, aluminum, copper, brass, bronze, silver, gold, etc. It can also be used in the heating treatment of metal. Our electric induction metal melting furnace can be safely applied in all kinds of workplaces and even at home. You can use them at your house, in the exhibition room, in the laboratory, in your factory workshop or in your store. Main Features 1. High efficiency, you just need a few minutes to melt a small batch of metal. 2. Energy-savinig, high stability, safe. 3. 24 hours continuous work ability. 4. All-solid-state IGBT frequency conversion and function adjustment, automatic frequency conversion tracking. 5. Automatic protection against all sorts of functional deficiency to ensure equipment reliability. 6. Manually and automatically adjust to improve the heating quality of the workpiece. 7. Customizable capacity to meet your production needs. Besides high functionality and high efficiency, our oven with inductor for quenching can also be easily operated. The machines can pair with all sorts of crucible to melt different metal, from clay graphite crucible, magnesium oxide crucible, to silicon carbide crucible.

Minimum Order: 1 bags

A&S Machinery Co., Ltd. manufactures the following CAT Tooth (Flare, Short, Dirt, Rock Penetration, Rock Chisel, Tiger). 7J9550 FLARE TOOTH 7J9551 SHORT TOOTH 7J9552 DIRT TOOTH 7T3402 DIRT TOOTH 7T3402-SB DIRT TOOTH 7T3402F FLARE TOOTH 7T3402PT ROCK PENETRATOR TOOTH 7T3402RC ROCK CHISEL TOOTH 7T3402RP2 ROCK PENETRATOR TOOTH 7T3402SYL SYL TOOTH 7T3402TL TIGER TOOTH 7T3402TL-SB TIGER TOOTH 7T3402WTL TWIN TIGER TOOTH 7T3403 ABRASION TOOTH 7T3403RPHD HD ROCK PENETRATOR TOOTH 7T8202 DIRT TOOTH 7T8459 TIGER TOOTH 7T9173 RIPPER TOOTH 8E4402 HD TOOTH 8E4402SYL SYL TOOTH 8E5771 RIPPER TOOTH 8J1450 FLARE TOOTH 8J1450F-SB FLARE TOOTH 8J1451 SHORT TOOTH 8J1452 DIRT TOOTH 8J2210 RIPPER TOOTH 8J2220 RIPPER TOOTH 8J3350 FLARE TOOTH 8J3350 FLARE TOOTH 8J3350F-SB FLARE TOOTH 9J4453 HD TOOTH 9J4459 ROCK PENETRATOR TOOTH 9J4551 DIRT TOOTH 9J4552 DIRT TOOTH 9J4553 HD TOOTH 9J4559 ROCK PENETRATOR TOOTH 9J5559 ROCK PENETRATOR TOOTH 9J8911 RIPPER TOOTH 9J8920 RIPPER TOOTH 9N4252 HD TOOTH 9N4253 DIRT TOOTH 9N4302 HD TOOTH 9N4303 ABRASION TOOTH 9N4352 HD TOOTH 9N4352-SB HD TOOTH 9N4353 ABRASION TOOTH 9N4452 HD TOOTH 9N4453 ABRASION TOOTH 9N4552 HD TOOTH 9W1453RP2 ROCK PENETRATOR TOOTH 9W1453RP3 ROCK PENETRATOR TOOTH 9W1453RPHD HD ROCK PENETRATOR TOOTH 9W1552RP2 ROCK PENETRATOR TOOTH 9W1553 HEAVY DUTY TOOTH 9W1553RP2 ROCK PENETRATOR TOOTH 9W1553RP2 ROCK PENETRATOR TOOTH 9W1553RP3 ROCK PENETRATOR TOOTH 9W1553RPHD HD ROCK PENETRATOR TOOTH 9W2359 TIGER TOOTH 9W2451 RIPPER TOOTH 9W4551 RIPPER TOOTH 9W4552 RIPPER TOOTH 9W5659 RIPPER TOOTH 9W6559 TIGER TOOTH 9W8209 TIGER TOOTH 9W8451 SHORT TOOTH 9W8452 DIRT TOOTH 9W8452 DIRT TOOTH 9W8452PT ROCK PENETRATOR TOOTH 9W8452RC ROCK CHISEL TOOTH 9W8452SYL SYL TOOTH 9W8452TL TIGER TOOTH 9W8452V SYL TOOTH 9W8452WTL TWIN TIGER TOOTH 9W8459 ROCK PENETRATOR TOOTH 9W8459-SB ROCK PENETRATOR TOOTH 9W8551 SHORT TOOTH 9W8552 DIRT TOOTH 9W8552-SB DIRT TOOTH 9W8552PT HD PENETRATOR TOOTH 9W8552RC ROCK CHISEL TOOTH 9W8552SYL SYL TOOTH 9W8552TL TIGER TOOTH 9W8552V SYL TOOTH 9W8552WTL TWIN TIGER TOOTH 9W8559 ROCK PENETRATOR TOOTH bucket tooth Available at A&S Machinery Co.,Ltd. CAT Excavator bucket tooth CAT Loader bucket tooth KOMATSU Excavator bucket tooth KOMATSU Loader bucket tooth HITACHI Excavator bucket tooth JCB Excavator bucket tooth & Side Cutters KOBELCO Excavator bucket tooth HYUNDAI Excavator bucket tooth TEREX Excavator bucket tooth VOLVO Excavator bucket tooth VOLVO Loader bucket tooth LIEBHERR Excavator bucket tooth BUCYRUS Electrical Shovel bucket tooth P&H Electrical Shovel bucket tooth DOOSAN Excavator bucket tooth DOOSAN/DAEWOO Excavator bucket tooth SANY Excavator bucket tooth SDLG Excavator bucket tooth SDLG Loader bucket tooth XUGONG Excavator bucket tooth LIUGONG Excavator bucket tooth CAT Bulldozer Ripper Tooth & Shanks KOMATSU Bulldozer Ripper Tooth & Shanks ESCO bucket tooth MTG bucket tooth Any interest or inquiry, please feel free to contact: A&S Machinery Co., Ltd. Tel: 0086 28 -6213 6109 Fax: 0086 28 8612 9221 Skype: cdesmachinery es-buckets(dot)com asbucketsteeth(dot)com 469 Xinsheng Road, Gaoxin District, Chengdu, China

Minimum Order: 100

A&S Machinery Co., Ltd. manufactures the following CAT Weld-on Tooth Adapters. 114-0464 CENTER WELD ON ADAPTER 114-0465 RH WELD ON ADAPTER 114-0466 LH WELD ON ADAPTER 119-3204 CENTER WELD ON ADAPTER 119-3205 CENTER WELD ON ADAPTER 119-3253 WELD ON ADAPTER 133-0704 WELD ON ADAPTER 159-0464 CENTER WELD ON ADAPTER 159-0465 RH WELD ON ADAPTER 159-0466 LH WELD ON ADAPTER 165-9288 RH WELD ON ADAPTER 165-9289 LH WELD ON ADAPTER 167-2476 RH WELD ON ADAPTER 167-2477 LH WELD ON ADAPTER 170-0073 BOLT ON ADAPTER 1U-257 BOLT ON ADAPTER 1U-307 BOLT ON ADAPTER 1U0257 BOLT ON ADAPTER 1U0307 BOLT ON ADAPTER 1U0307-SB BOLT ON ADAPTER 1U0741 ADAPTER COVER 1U1254 FLUSH MOUNT ADAPTER 1U1304 FLUSH MOUNT ADAPTER 1U1350 WELD ON ADAPTER 1U1354 FLUSH MOUNT ADAPTER 1U1357 CENTER BOLT ON ADAPTER 1U1358 LH BOLT ON ADAPTER 1U1359 RH BOLT ON ADAPTER 1U1553 WELD ON ADAPTER 1U1555 WELD ON ADAPTER 1U1556 WELD ON ADAPTER 1U1888 LH CORNER ADAPTER 1U1889 RH CORNER ADAPTER 3G1357 BOLT ON ADAPTER 3G2357 BOLT ON ADAPTER 3G3357 BOLT ON ADAPTER 3G3357-SB BOLT ON ADAPTER 3G4258 LH CORNER ADAPTER 3G4259 RH CORNER ADAPTER 3G4307 BOLT ON ADAPTER 3G4308 LH CORNER ADAPTER 3G4309 RH CORNER ADAPTER 3G5307 BOLT ON ADAPTER 3G5358 LH CORNER ADAPTER 3G5359 RH CORNER ADAPTER 3G6304HD CENTER WELD ON ADAPTER 3G6305 RH WELD ON ADAPTER 3G6306 LH WELD ON ADAPTER 3G7357 BOLT ON ADAPTER 3G8308 CORNER ADAPTER 3G8309 CORNER ADAPTER 3G8354HD CENTER WELD ON ADAPTER 3G8355 RH WELD ON ADAPTER 3G8356 LH WELD ON ADAPTER 3G9307 BOLT ON ADAPTER 3G9494 CENTER WELD ON ADAPTER 3G9495 RH WELD ON ADAPTER 3G9496 LH WELD ON ADAPTER 4T4307 BOLT ON ADAPTER 6I6355 RH WELD ON ADAPTER 6I6404-SB CENTER WELD ON ADAPTER 6I6405 RH CORNER ADAPTER 6I6406 LH CORNER ADAPTER 6I6464 CENTER WELD ON ADAPTER 6I6465 RH CORNER ADAPTER 6I6466 LH CORNER ADAPTER 6I6555 WELD ON ADAPTER 6I6556 WELD ON ADAPTER 6I6604HD CENTER WELD ON ADAPTER 6I8243 RH CORNER ADAPTER 6I8244 LH CORNER ADAPTER 6I9250 LH CORNER ADAPTER 6I9251 RH CORNER ADAPTER 6I9898 BOLT ON ADAPTER 6U6404 CENTER WELD ON ADAPTER 6Y0469 BOLT ON ADAPTER 6Y3254-1 1/4-SB WELD ON ADAPTER 7703990 WELD ON ADAPTER 7J3354 WELD ON ADAPTER 7J3355 RH WELD ON ADAPTER 7J3356 LH WELD ON ADAPTER 7J9554 FLUSH MOUNT ADAPTER 7T-3305 RH WELD ON ADAPTER 7T-3306 LH WELD ON ADAPTER 7T-3405 RH CORNER ADAPTER 7T-3406 LH CORNER ADAPTER 7T-8454 CENTER WELD ON ADAPTER 7T-8455 RH WELD ON ADAPTER 7T-8456 LH WELD ON ADAPTER 7T3305 RH WELD ON ADAPTER 7T3306 LH WELD ON ADAPTER 7T3404 WELD ON ADAPTER 7T8454 CENTER WELD ON ADAPTER 8E0464 CENTER WELD ON ADAPTER 8E0465 RH WELD ON ADAPTER 8E0466 LH WELD ON ADAPTER 8E2184 BOLT ON ADAPTER 8E2465 RH WELD ON ADAPTER 8E2466 LH WELD ON ADAPTER 8E2467 CENTER BOLT ON ADAPTER 8E3464 CENTER WELD ON ADAPTER 8E3465 RH WELD ON ADAPTER 8E3466 LH WELD ON ADAPTER 8E5308 LH BOLT ON ADAPTER 8E5309 RH BOLT ON ADAPTER 8E5358 LH BOLT ON ADAPTER 8E5359 RH BOLT ON ADAPTER 8E6464 WELD ON ADAPTER 8E6465 RH WELD ON ADAPTER 8E6466 LH WELD ON ADAPTER 8E9490 WELD ON ADAPTER 8E9543 ADAPTER COVER 8J1454 CENTER WELD ON ADAPTER 8J3354 FLUSH MOUNT ADAPTER 8J4310 RH WELD ON ADAPTER 8J4311 LH WELD ON ADAPTER 8J4312 WELD ON ADAPTER 8J5357 BOLT ON ADAPTER 8J6587 BOLT ON ADAPTER 8J6656 BOLT ON ADAPTER 8J7525 WELD ON ADAPTER 9J0174 CENTER WELD ON ADAPTER 9J2354 FLUSH MOUNT ADAPTER 9J2357 BOLT ON ADAPTER 9J2826 CENTER WELD ON ADAPTER 9J4207 BOLT ON ADAPTER 9J4254 FLUSH MOUNT ADAPTER 9J4297 WELD ON ADAPTER 9J4304 FLUSH MOUNT ADAPTER 9J4354 FLUSH MOUNT ADAPTER 9J8455 BOLT ON ADAPTER 9J8929 WELD ON ADAPTER 9W1304 CENTER WELD ON ADAPTER 9W9971 BOLT ON ADAPTER bucket tooth Available at A&S Machinery Co.,Ltd. CAT Excavator bucket tooth CAT Loader bucket tooth KOMATSU Excavator bucket tooth KOMATSU Loader bucket tooth HITACHI Excavator bucket tooth JCB Excavator bucket tooth & Side Cutters KOBELCO Excavator bucket tooth HYUNDAI Excavator bucket tooth TEREX Excavator bucket tooth VOLVO Excavator bucket tooth VOLVO Loader bucket tooth LIEBHERR Excavator bucket tooth BUCYRUS Electrical Shovel bucket tooth P&H Electrical Shovel bucket tooth DOOSAN Excavator bucket tooth DOOSAN/DAEWOO Excavator bucket tooth SANY Excavator bucket tooth SDLG Excavator bucket tooth SDLG Loader bucket tooth XUGONG Excavator bucket tooth LIUGONG Excavator bucket tooth CAT Bulldozer Ripper Tooth & Shanks KOMATSU Bulldozer Ripper Tooth & Shanks ESCO bucket tooth MTG bucket tooth Any interest or inquiry, please feel free to contact: A&S Machinery Co., Ltd. Tel: 0086 28 -6213 6109 Fax: 0086 28 8612 9221 Skype: cdesmachinery es-buckets(dot)com asbucketsteeth(dot)com 469 Xinsheng Road, Gaoxin District, Chengdu, China

Minimum Order: 100