Machinery & Parts

3 Ton Xiangtan Trolley Wire Locomotive for Mining Tunnel Trolley electric locomotive is a kind of rail transportation traction equipment, powered by transformers and overhead lines. Mainly used in mines where there is no risk of explosion. Because of its special power supply mode, the trolley electric locomotive has no limit on the cruising range. Therefore, it is suitable for long-term and long-distance use. There are also many options in terms of speed regulation and braking methods. Speed control methods include resistance speed control, chopping speed control and frequency conversion speed control. Braking methods include pure mechanical braking, hydraulic braking and compressed air braking. In addition, electric braking can also be selected as an auxiliary braking method. Adhesive / total weight (t) : 3 ton Track gauge (mm) : 600.762.900 Traction (KN) : 6.1 5.74 Max. Traction (KN) : 7.36 Speed(km/h) : 10.6 7.5 Power (KW) : 12KWx1 6.5KWX2 Dimensions Length(mm) : 2700 2750 Width(mm) : 940,1102 or 1240 Height(mm) : 1550 1500 Wheelbase (mm) : 816 850 Wheel diameter (mm) : 650 850 Min Curve radius (m) : 5.7 6 Controller : Resistencia or IGBT Braking method : Mechanical Detailed Photos Advantages of our product 1.Using high-quality steel plates, special rust removal process make sure it more anti-corrosion and suitable for harsh mining environment. 2. Producing motors ourselves, using high lever insulation material and pure copper, ensure the powerful traction force, and suitable for harsh mining environment. 3.Gear anastomosis surface to reach more than 80%, which is far more exceeding the standard. 4.Professionally designed and adjusted frame ensure safe driving and avoids falling off rails. 5.A variety of braking methods can be choose, air brake, hydraulic brake, electric brake, mechanical brake to ensure the safety drive. 6. 40 years richful experience with the ability to design and make customized product according to your requirements. 7. Proving factory online-visiting Factory Test Mining Locomotive test 1.Before Running the locomotive,carry out gear debugging, lighting, gear, and brake adjustment etc.To ensure the normal operation of the locomotive. 2.Carry out a tensile test before leaving the factory to ensure the load performance of the locomotive meets the standard. Our design standards generally exceed the national standard by 10%-20%. 3.Carry out different type running test before leaving the factory to ensure the performance and normal operation of the whole locomotive. It can adapt to various harsh conditions under simulated working conditions. Motor test The motor has to go through many inspection procedures before leaving the factory, and each motor has to be carried out with load running experiments. Explosion-proof motors are carried out with water pressure test. All the test of motor is to ensure that can adapt to harsh working conditions. Cases 1. A good feedback of our lithium battery locomotive from a client of Latin America 2. In order to solve the exist problems of lead-acid batteries. More than 30 lead-acid battery electric locomotives in this large mining were changed into lithium battery electric locomotives, which improved the work enthusiasm and production efficiency of employees, reduced costs,and more environment- friendly. 3. The mining rock drill car designed by Sunward Co., has a small size and simple structure, so the space for placing the lithium battery on the body is very limited. According to the limitation size, our company design a lithium power supply power plan, which perfectly solves the problem of lithium power supply space. In order to adapt to the special industrial and mining environment and improve transportation efficiency, a batch of 2.5-ton lithium battery electric locomotives are designed to Myanmar Clients. FAQ What's your product advantages? We have more 40 years experience in this field so that we could design or produce the locomotive as your requirement. We could also provide online service to teach you how to operate and maintain the locomotive. The most important thing that we produce the main part of the locomotive- The traction motors. we could guarantee the power of the locomotive. 1.Pre-sales Service: The wide product range enables us to provide our customers with individual machines or complete processing plants. Based on our customer's request and budget, our experts make efficient and reliable solutions, and we produce strictly follow customers' order. What's more, every customer has the chance to visit the working machine in the site before placing the order. 2.After-sales Service: Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the quarry site to help install the customer's plants.Necessary training about machine daily maintenance to local workers is provided also. 3.Methods of Payment: T/T (Telegraphic Transfer) or Western Union or L/C at sight Handling time for an order: Within 10 days supplied from stock 4.Shipping method: Sample order: we suggest Courier express like DHL/UPS/FEDEX or by air Bulk order: we suggest by air or by sea. 5.Quality Control: We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 6.After Services: a. Our sales team will response for your question within 24 hours (Holiday is Excluded) b. Technical Support will be available in any time c. Free replacement will provide once the failure confirmed caused by our product quality

Minimum Order: 1 bags

YZH Stationary Rockbreaker Booms Shandong Yuanzhengxinghang Machinery Equipment Co., Ltd. specializes in the research, development and production of stationary rockbreaker booms, and its products are widely used in mining, metallurgy, sand and gravel aggregate processing and other fields. Main Features 1. Modular and high strength design The arm consists of hydraulic pump station, rotary support system, big arm and small arm, hydraulic breaker and controller, etc. It supports quick replacement of breaker, bucket, hydraulic drill and other tool heads to meet diversified operational requirements. It adopts high-strength manganese steel welded structure with strong impact resistance, and the internal buffer plate is set up to withstand heavy loads to ensure stable operation under adverse working conditions. 2. Intelligent control and flexibility It supports three operation modes: closed cab, wired or wireless remote control, and 5G light remote control system, which makes the operation precise and convenient. With the ability of multi degree of freedom movement, it can realize accurate positioning and operation in complex space. 3. Energy saving, environmental protection and high efficiency power Adopting 380V/50Hz motor drive, the energy cost is more than 75% lower than the traditional diesel equipment, and the operation noise is low, which is in line with the environmental protection requirements. The core components of the hydraulic system (such as constant pressure variable pump, proportional valve) are mostly imported from Germany, combined with the load feedback technology to realize high energy efficiency and stable output. 4. Adaptability and expandability The length of working arm can be customized (from 1m to 20m), and it supports two types of installation: rotary support type (H-type) and steering cylinder type (Z-type), which can be adapted to different space constraints. Equipped with quick couplings, the tool head can be flexibly replaced to meet a variety of tasks such as crushing, slag clearing, clamping and so on. Typical Application Scenarios 1. Mining and quarry Dealing with crusher inlet blockage, clearing the “tiger mouth” of open-pit mines or underground mines, and improving the efficiency of ore transfer. 2. Metallurgy and Foundry Cleaning of metallurgical slag, removal of ladle liners, and disposal of large metal residues in foundries. 3. Sand and Aggregate Processing Assist in handling oversized boulders alongside crushing plants or mobile crushers to optimize the aggregate production process. Core Advantages 1. Safety Improvement Remote control function reduces workers' exposure to high-risk environments and reduces the risk of accidents, especially for underground or high- temperature operation scenarios. 2. Remarkable economic benefits Although the initial investment is high, the long-term operation can reduce labor costs, maintenance costs and energy consumption expenses, the overall cost-effective than traditional blasting or manual cleaning. 3. multiply production efficiency A single machine can replace more than one person, processing hard rock (such as granite, limestone) to improve efficiency, shorten downtime, to ensure continuous production. 4. Environmental protection and sustainability Electric drive reduces carbon emissions, low noise design improves the working environment, in line with the development of green mines.

Minimum Order: 1 bags

Elbow Link-Style High Precision Coining Press Advantages Direct drive via servo motor, providing stamping energy in place of the flywheel for the press, eliminating clutches and brakes. Fewer mechanical parts, less inertia of the transmission structure, lower noise level, simplified maintenance, and cheaper maintenance costs. Precise control of the stamping process by arbitrarily setting and adjusting the servo motor speed. Optimized stamping process curve by arbitrarily programming the operating speed, stroke position and pressure of the slide, greatly improving the accessibility and flexibility of production. Full load operation while stamping at low slide speed (above 1 spm). Reduced press working cycle time, enhanced production rate and production efficiency by increasing the speed of slide's return stroke.

Main motor is Low Speed High Torque Servo Motor Brand: S-T Intelligence Servo Drive & Control System. Slide pneumatic-hydraulic overload protection: slide stops automatically when the load is 10% more than the nominal capacity. Overload reset time (after the slide stops at TDC) <180seconds. Manual blown-off can be carried out when the mode switch is at "test" position. Eight-points square guides for slide. Super-long guiding. Perpendicularity between the slide movement and bolster top has been kept. Electrical die height adjustment device. Adjusted only at normal counterbalance pressure, hydraulic protection and lubrication. Automatic stop at upper and lower adjustment limit. Manual adjustment by functional keys / hand wheel. Automatic adjustment by preset value. Counterbalance Pressure to be adjusted manually / automatically, interlocking with adjustment motor of slide and the control of servo motor. The frame is of welded structure with stress-relief.

Shop S-T Intelligence's high-quality double-point servo presses, ideal for complex stamping and forming applications, with advanced designs that ensure consistent results and optimized production efficiency. Advantages Direct drive via servo motor, providing stamping energy in place of the flywheel for the press, eliminating clutches and brakes. Fewer mechanical parts, less inertia of the transmission structure, lower noise level, simplified maintenance, and cheaper maintenance costs. Precise control of the servo stamping process by arbitrarily setting and adjusting the servo motor speed. Optimized stamping process curve by arbitrarily programming the operating speed, stroke position and pressure of the slide, greatly improving the accessibility and flexibility of production. Full load operation while stamping at low slide speed (above 1 spm). Reduced press working cycle time, enhanced production rate and production efficiency by increasing the speed of slide's return stroke.

Main Structure: C-frame Main Transmission Form: Top drive, eccentric gear type single point servo press Anti-Eccentric Load: The eight-sided guide rail adjustment adopts a large point distance anti deviated load structure to ensure the precision of the slide during stamping. Lubrication: The main drive bearing part is lubricated with thin oil Main Motor: Low-speed high-torque water-cooled servo motor, ensuring reliable operation over extended periods

YZH pedestal booms Shandong YZH Machinery Equipment Co., Ltd. is a set of independent research and development, technological innovation, sales agents, foreign trade exports as one of the high-tech production enterprises, has passed the ISO9001 quality management system certification and the CE certification. YZH pedestal booms have a wide range of applications, mainly used in underground or open-cast grid screens (Grid); Stationary primary crushing plants; mobile&portable crushing plants; foundry industry&metallic industry, etc. YZH pedestal booms can be said to be almost suitable for all environments. If you are still unable to find a suitable crushing machine for your work environment, please contact us. Our engineers will propose professional solutions based on your specific situation, which is to maximize your interests.

Minimum Order: 1 bags

● High rigidity precision linear guides are selected, featuring high speed, low noise and low wear, which are suitable for the rapid processing of precision mold parts. ● The spindle adopts C3 high-precision lead screw angular contact ball bearings and a high-strength arrangement structure. ● It is driven by a high-torque, low-noise and highly stable AC control servo motor. ● The powerful cutting ability combines with outstanding accuracy and performance, making inlaying and hole drilling operations simple and easy. ● Computer Numerical Control is widely used in the processing industries of machine tools, auto parts, lighting fixtures, hardware and other parts.

The first choice for batch processing of precision parts in die casting, communications, and 5G mobile phone industries If you are looking to improve your productivity, our vertical CNC drilling and tapping machines are your best choice. With their excellent versatility and powerful processing power, these machines can handle a variety of drilling and tapping tasks, from simple to complex. We offer a wide range of models to ensure that you can find the one that best meets your specific needs. Whether you are looking for extreme precision, high- speed operation or advanced functions, our professional team will help you choose the most suitable equipment. By using our 3 Axis Vertical Machining Center, you will enjoy the benefits of significantly improved productivity and work efficiency. Take advantage of the versatility and powerful performance of these advanced machines to meet various processing challenges while ensuring the accuracy and quality of the results. Our team is dedicated to providing excellent customer service and is ready to solve any problems or concerns you encounter at any time.

1, The SMT machine mounting head for double track double suction rod, four module structure, can be independently controlled. 2, The whole fuselage adopts precision welding, and the beam adopts high- strength cast iron structure. 3, The machine adopts linear motor (magnetic suspension), imported servo motor drive, high precision, It's fast. 4, Low maintenance costs, simple operation, operators only need to undergo simple training to go online production. 5, The machine adopts double electric Feida feeding. Many products are beginning to use LED equipment, such as LED display screens, traffic lights, car lights, LED backlights, lighting sources, and so on. Therefore, when producing and mounting LED products, we also need a chip mounter for fast and fully automatic mounting. Compared with other machines produced by traditional chip mounters, SMT assembly lines, our latest SMD LED chip mounter can perfectly meet the precision requirements of LED products. More importantly, the requirements for speed and size are also high, so the installation speed must be fast when using an automatic LED bulb manufacturing machine, and the length of the printed circuit board on the chip mounter must be at least 1200 mm. Ling Yueyang provides you with cheap LED mounting machines with high speed and precision.

1, Mainly for LED coil tin printing, support 100-270(mm) width (no wire) Light with FPCB. 2, Using the platform calibration system independently developed by Addis company, simple operation, easy to learn, short line change time. 3, High positioning accuracy, repeated positioning accuracy ±0.02mm; Printing accuracy ±0.05mm, support glue printing. Fully automatic control, production efficiency 5, High-definition vision, platform X/Y automatic correction. 6, Vacuum auxiliary FPCB fixed positioning system, PCB positioning is convenient and accurate. 7, Standard stainless steel scraper, unique design, improve blade life. 8, Industrial computer, Win7,Win10 Chinese (English) version operating system.

5 Ton Mining Trolley Electric Locomotive in Narrow Gauge We are the real Mining locomotive factory in china, we could provide you with E-online chat to show your our factory! Trolley Locomotive is applied in the railway transportation for tract wagons,people and other things.The max traction capacity of a 5 ton trolley locomotive could up to 50 ton. C: Locomotive for coal mining J: Trolley electric locomotives Y: Single-end driver's cab G: Steel wheel,resistor for speed control GB: Steel wheel,chopping wave for speed control Adhesive / total weight (t) 5 ton Track gauge (mm) 500.600,762 or 900 Traction (KN) 6.1kN/ 5.74kN Max. Traction (KN) 7.36kN Speed(km/h) 10.6km/h/ 7.5km/h Voltage 250 Power (KW) 7.5KW*2 Dimensions Length(mm) 2700mm/ 2750mm Width(mm) 940,1082 or 1220mm Height(mm) 1550 Wheelbase (mm) 816mm/ 850 mm Wheel diameter (mm) Φ650mm/ Φ520 mm Min Curve radius (m) 5.7-6 m Controller Resistance or IGBT Braking method Mechanical or Hydraulic Brake

Minimum Order: 1 bags

Battery electric locomotive is a kind of track traction equipment powered by batteries, which is generally used in mines. There are two types of battery electric locomotives, explosion-proof type and ordinary type. The explosion- proof type is mainly used in coal mines. There are also many options in terms of speed regulation and braking methods. Speed control methods include resistance speed control, chopping speed control and frequency conversion speed control. Braking methods include pure mechanical braking, hydraulic braking and compressed air braking. In addition, electric braking can also be selected as an auxiliary braking method. Adhesive / total weight (t) : 5 t Track gauge (mm) : 500.600.762.900 Traction (KN) : 7.06 Max. Traction (KN) : 12.26 Speed(km/h) : 7 Battery Voltage (V) : 90 or 96 Battery Capacity (Ah) : 385 or 300AH Power (KW) : 7.5KWx2 Dimensions Length(mm) : 2860 Width(mm) : 920,1082 or 1220 Height(mm) : 1550 Wheelbase (mm) : 850 Wheel diameter (mm) : 520 Min Curve radius (m) : 6 Controller : Resistencia o IGBT Braking method : Mechanical or hydraulic brake

Minimum Order: 1 bags

Contact us on our WhatsApp: +8615640330516 for best quality of TDP Series Single Punch Tablet Press Machine and Mould Accessories at affordable prices with fast delivery at your doorstep. TDP-6 Single Punch Tablet Press Machine——$650 USD TDP-5 Single Punch Tablet Press Machine—-$550 USD TDP-2 Single Punch Tablet Press Machine—-$350 USD Small Series Single Punch Tablet Press Machine—-$$400 USD Tdp-1.5 Single Punch Tablet Press Machine——$400 USD Tdp Pill/ Candy/ Cartoon Tablet/ Medicine/ Tablet Making Machine/Small Lab Manual Single Punch/ Rotary Tablet Press—-$300 USD Tdp-1.5t/3t/5t/6t Puncing M30 Tablet Stamping Die Pressing Machine Tablet Manual Sugar Pill Pressing Machine—-$450 USD Tdp Milk Candy Pill Press Single Punch Tablet Press Machine——$450 USD 3D Mould Candy Pill Press Mold Hand Press Mold Tablet Press Logo Punch Die for Tdp Machine——$15 USD Custom Round 8mm 12mm Pill Press Mold Pressing Die for Tdp-5 Tdp-6 Tdp-1.5 Tablet Press, Punch Press Mould——$15 USD We sincerely welcome inquiries from small order to bulk order. There is 15% discount for bulk purchase.

Minimum Order: 3 bushels