Machinery & Parts

Screening Muddy Soil Roller Screening Machine Large Throughput Stable Operation Equipment Description The Roller Screening Machine is the equipment used for screening ore in the mine crushing system, which is widely used. It has strong adaptability to ores, and its screening effect is very good for ores with silt or high water content. The Roller Screening Machine can improve the efficiency of the subsequent crushing process, so its feedback in the industry is very good, and it is very popular among customers. The model of this Roller Screening Machine is XCDRS1410, which is mainly composed of frame, bearing, lining plate, reduction motor, cleaning device, etc. It has 10 roller shafts, which are arranged with a certain inclination angle, which can make the mineral do "parabolic movement" to achieve better effect of debris separation. The surface width of the roller shaft is 1400 mm. The widening design increases the throughput of the equipment, which is about 364-896 tons per hour, and is commonly used in medium crushing production lines. Technical Reference Data Model Roll surface width (mm) Number of axes Throughput (t/h) Feed side length (mm) Roll shaft clearance (mm) Screening efficiency (%) Installed power Flap drive push rod (optional for for electro hydraulic users) Power (kw) Number Model Thrust (kgf) Power (w) XCDRS1008 1000 8 140-385 ≤500 25-100 80 2-4 8 DT or DTY 300 370 XCDRS1010 10 168-490 85 3-3.5 10 XCDRS1012 12 210-595 90 12 XCDRS1408 1400 8 294-700 ≤700 35-120 80 8 DT or DTY 500 750 XCDRS1410 10 364-896 85 3-7.5 10 XCDRS1412 12 455-1050 90 12 Picture Display Screening Muddy Stone And Soil Separator Roller Screen 364 To 896 TPH Large Throughput Stable Operation 0 Screening Muddy Stone And Soil Separator Roller Screen 364 To 896 TPH Large Throughput Stable Operation 1 Screening Muddy Stone And Soil Separator Roller Screen 364 To 896 TPH Large Throughput Stable Operation 2

3-Ton Mining Trolley Electric Locomotive for Metal Mine Trolley electric locomotive is a kind of rail transportation traction equipment, powered by transformers and overhead lines. Mainly used in mines where there is no risk of explosion. Because of its special power supply mode, the trolley electric locomotive has no limit on the cruising range. Therefore, it is suitable for long-term and long-distance use. There are also many options in terms of speed regulation and braking methods. Speed control methods include resistance speed control, chopping speed control and frequency conversion speed control. Braking methods include pure mechanical braking, hydraulic braking and compressed air braking. In addition, electric braking can also be selected as an auxiliary braking method. Adhesive / total weight (t) : 3 ton Track gauge (mm) : 600.762.900 Traction (KN) : 6.1 5.74 Max. Traction (KN) : 7.36 Speed(km/h) : 10.6 7.5 Power (KW) : 12KWx1 6.5KWX2 Dimensions Length(mm) : 2700 2750 Width(mm) : 940,1102 or 1240 Height(mm) : 1550 1500 Wheelbase (mm) : 816 850 Wheel diameter (mm) : 650 850 Min Curve radius (m) : 5.7 6 Controller : Resistencia or IGBT Braking method : Mechanical Detailed Photos Advantages of our product 1.Using high-quality steel plates, special rust removal process make sure it more anti-corrosion and suitable for harsh mining environment. 2. Producing motors ourselves, using high lever insulation material and pure copper, ensure the powerful traction force, and suitable for harsh mining environment. 3.Gear anastomosis surface to reach more than 80%, which is far more exceeding the standard. 4.Professionally designed and adjusted frame ensure safe driving and avoids falling off rails. 5.A variety of braking methods can be choose, air brake, hydraulic brake, electric brake, mechanical brake to ensure the safety drive. 6. 40 years richful experience with the ability to design and make customized product according to your requirements. 7. Proving factory online-visiting Factory Test Mining Locomotive test 1.Before Running the locomotive,carry out gear debugging, lighting, gear, and brake adjustment etc.To ensure the normal operation of the locomotive. 2.Carry out a tensile test before leaving the factory to ensure the load performance of the locomotive meets the standard. Our design standards generally exceed the national standard by 10%-20%. 3.Carry out different type running test before leaving the factory to ensure the performance and normal operation of the whole locomotive. It can adapt to various harsh conditions under simulated working conditions. Motor test The motor has to go through many inspection procedures before leaving the factory, and each motor has to be carried out with load running experiments. Explosion-proof motors are carried out with water pressure test. All the test of motor is to ensure that can adapt to harsh working conditions. Cases 1. A good feedback of our lithium battery locomotive from a client of Latin America 2. In order to solve the exist problems of lead-acid batteries. More than 30 lead-acid battery electric locomotives in this large mining were changed into lithium battery electric locomotives, which improved the work enthusiasm and production efficiency of employees, reduced costs,and more environment- friendly. 3. The mining rock drill car designed by Sunward Co., has a small size and simple structure, so the space for placing the lithium battery on the body is very limited. According to the limitation size, our company design a lithium power supply power plan, which perfectly solves the problem of lithium power supply space. In order to adapt to the special industrial and mining environment and improve transportation efficiency, a batch of 2.5-ton lithium battery electric locomotives are designed to Myanmar Clients. FAQ What's your product advantages? We have more 40 years experience in this field so that we could design or produce the locomotive as your requirement. We could also provide online service to teach you how to operate and maintain the locomotive. The most important thing that we produce the main part of the locomotive- The traction motors. we could guarantee the power of the locomotive. 1.Pre-sales Service: The wide product range enables us to provide our customers with individual machines or complete processing plants. Based on our customer's request and budget, our experts make efficient and reliable solutions, and we produce strictly follow customers' order. What's more, every customer has the chance to visit the working machine in the site before placing the order. 2.After-sales Service: Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the quarry site to help install the customer's plants.Necessary training about machine daily maintenance to local workers is provided also. 3.Methods of Payment: T/T (Telegraphic Transfer) or Western Union or L/C at sight Handling time for an order: Within 10 days supplied from stock 4.Shipping method: Sample order: we suggest Courier express like DHL/UPS/FEDEX or by air Bulk order: we suggest by air or by sea. 5.Quality Control: We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 6.After Services: a. Our sales team will response for your question within 24 hours (Holiday is Excluded) b. Technical Support will be available in any time c. Free replacement will provide once the failure confirmed caused by our product quality

Minimum Order: 1 bags

Payment: Paypal.western Union.TT Packing: Carton Box Our products are mainly produced by four processes, including casting, powder metallurgy, numerical control and metal injection molding. The main raw materials are: iron alloy, iron-nickel alloy, titanium alloy, stainless steel, etc.

Minimum Order: 10 long tons

4 Meter / Min Servo Motor Glazed Tile Roll Forming Machine new style cutter Details No 1 Total power 5.5 + 4 KW 2 Rows of rollers 18 Rows 3 Diameter OF shaft ￠70mm 4 Voltage 380V 50Hz 3phases 5 Thickness 0.6 mm Pressure tile machine equipment features: The device has the advantages of operation, maintenance, maintenance, mechanical debugging, easy mold replacement, etc. The whole unit automatic control system adopts a highly integrated network, which makes the performance of the automation system more superior; the device uses a high level of automatic control Software, to achieve the production of information management In the process of color plate straightening produced by tile press equipment, the profiles will move from top to bottom, left to right, and require the gap between the straightening mechanism and the profile to be relatively loose. There can be a certain gap between the straight body and the top, bottom, left and right surfaces of the profile. The gap size is between 0.01-0.05in (0.25- 1.25mm). If the straightening is torsionally deformed, the gap can be smaller. TEJA TOLEDO Glazed Tile Roll Forming Machine 0 Color steel tile equipment debugging 1. First of all, the four horns of the front and rear linings of the color steel press machine are the same from the height of the upper end of the shaft, and then from the first row to the last row, find a straight line, check, and Whether the axis is in a straight line, adjust the left and right sides of the lower axis to be level. 2, the first row and the last row of color steel tile machine equipment to find a good center, and then tighten the two sides to lock nut, in the middle of the center wheel before and after the pull a good line, the upper and lower axis clearance adjustment After that, you can adjust the machine straight. 3, color steel tile machine equipment - pressure tile machine pressure plate deviation debugging method, such as the plate running to the right, pad left (feeder), or fall to the right bottom level (the first axis off the first few axis The upper shaft falls with the bottom shaft). TEJA TOLEDO Glazed Tile Roll Forming Machine 1 Double layer machine features: 1. One machine and two uses: small floor space, convenient transportation, cost saving; 2. High production efficiency: two types of color steel tile can be produced at the same time. The production efficiency is greatly improved. 3, automatic production: the use of industrial PLC computer frequency control, automatic feeding, cutting a molding, easy operation and maintenance. TIPS: TEJA TOLEDO Glazed Tile Roll Forming Machine 2 How to operate the color tile machine correctly? Although there are many types of color steel tile machine, but the correct operation method is exactly the same. 1. After the installation of the color steel tile tile machine equipment is completed, first check whether certain fasteners are still fastened, because the long-distance transportation of the equipment may inevitably cause the fasteners to loosen. 2. After the steel tile tile machine equipment is connected to the power supply, check the positive and negative of a device to see if it needs to be inverted. 3. Fit the chain protection cover 4. Cut a 2 meter board, and turn on the board to make it go out smoothly, and listen to whether there is any change in the equipment. If there is a deviation, please fine-tune the direction of the feed rack. If there is no problem, you can start production.

Item Purple triangular copper profile Standard ASTM, AISI, JIS, ISO, EN, BS, GB, etc. Material T1, T2, T3, C11000, C11100, C11300, C11400, C11500, C1100, TU1, TU2, C10200, C1020 , TP1, TP2, C12000,C12200, C14500, C14700, C15000, C1201, C1220, etc. Size Length: as customers' requirement. Size can be customized according to customer needs. Surface Mill, polished, bright, oiled, hair line, brush, mirror, sand blast, or as required. Application Can be used as anti-slip copper strips, decorative copper strips, mechanical equipment copper strips, etc. Export to America, Australia, Brazil, Canada, Peru, Iran, Italy, India, United Kingdom, Arab, etc. Package Standard export package or as required. Price term EXW, FOB, CIF, CFR, CNF, etc. Payment T/T,Western Union,L/C,etc. Certificates TUV&ISO&GL&BV, etc.

Minimum Order: 1 bags

（Prices and details can be contacted by email or phone） Flange Parts are important joining function parts, which used in many important connection joint of devices and machinery. It normally connect pipe system with other equipment, valves, etc. while offering reliable connection effect and allows dismissing and changing to improve updating of the joint connection. So, in some way, flange parts are many choices of devices to replace welding connection. Normally Flange parts are made of metal materials, such as Aluminum, Steel, Stainless Steel, etc. It is made by CNC turning and milling process, or made by CNC machining center machine with multi processes combine. The finishing treatments on flange parts depends on the material used and the devices function. none-treatment, or anodizing, or passivation or coating are commonly used on flange parts surface. Asianstar produces flange parts for clients with long term experience. We understand the flange parts function and its key point of fixing positioning, our skillful team can produce small and large flange parts with best solution to make sure the products in qualified result. https://www.asianstarcnc.com/products/f , lange-parts

Minimum Order: 1 bags

Pump Out Reverse Circulating Valve / Circulating Sub For Drill Stem Testing Service The Pump Out Reverse Circulating Valve is a Hollow Plug Impact type Circulating Sub. The Pump Out Reverse Circulating Valve is used in the more difficult well testing operations, where depth and high-pressure differential across the plug sometimes make it difficult to open a conventional reversing sub. The Pump Out Reversing Sub allows removal of free oil or gas in the pipe (minimizing the risk of fire) while the tool is coming out of the hole. It is also used to circulate and condition the drilling fluid when necessary. The Pump Out Reversing Circulating Valve / Circulating Sub also equipped with a shear pin with plate to be a backup device in case the plug can not be broken by flute bar, applying the tubing pressure, the pin can be sheared by the pressure and build the communication. Technical parameter of Pump Out Reverse Circulating Valve 1 OD 5”(127.5mm) 4.25”(108mm) 6.25”(158.8mm) 2 ID 57mm 45mm 82mm 3 Length 500mm 450mm 520mm 4 Working Pressure 35Mpa(5000psi) 35Mpa(5000psi) 35Mpa(5000psi) 5 Tensile Strength 2034KN 1418KN 2882KN 6 Burst Pressure 165Mpa 156Mpa 182Mpa 7 Collapse Pressure 148Mpa 146Mpa 168Mpa 8 Torque Strength 43kN.m 21.6kN.m 55kN.m 9 Working Temp. -29oC~180oC 10 Service H2S NACE MR0175(Above 175F) 11 Connection Thread 3 1/2” /EUE/IF/ CAS Box Pin 3 1/2” /EUE/IF/ CAS Box Pin 4 1/2” IF Box Pin

5 Ton Anti-Explosion Mining Battery Locomotive Battery electric locomotive is a kind of track traction equipment powered by batteries, which is generally used in mines. There are two types of battery electric locomotives, explosion-proof type and ordinary type. The explosion- proof type is mainly used in coal mines. There are also many options in terms of speed regulation and braking methods. Speed control methods include resistance speed control, chopping speed control and frequency conversion speed control. Braking methods include pure mechanical braking, hydraulic braking and compressed air braking. In addition, electric braking can also be selected as an auxiliary braking method. Adhesive weight (t) : 5 t Track gauge (mm) : 500.600.762.900 Traction (KN) : 7.06 Max. Traction (KN) : 12.26 Speed(km/h) : 7 Battery Voltage (V) : 90 or 96 Battery Capacity (Ah) : 385 Power (KW) : 7.5KWx2 Dimensions Length(mm) : 2860 Width(mm) : 920,1082 or 1220 Height(mm) : 1550 Wheelbase (mm) : 850 Wheel diameter (mm) : 520 Min Curve radius (m) : 6 Controller : Resistencia o IGBT Braking method : Mechanical or hydraulic brake

Minimum Order: 1 bags

Silicon steel is low carbon special steel ≤C(0.08%), Si(1.0～4.5%), its producing process is complicated and making cost is higher. It has characters of high magnetoconductivity, low coercive force and high resistivity and thus little loss of hysteresis and eddy current, the purity of silicon steel sheet must be high, sheet surface must be very flat and clean, silicon steel sheet covers 1% of whole steel production, whose main application is motors, transformers, electric appliances, meters, etc. In this condition, the processing equipment for silicon steel sheet must be very precise. Max yield strength: 450Mpa, max tensile strength: 600Mpa Hardness HV100-220, elongation 15% -45%

14-Ton Trolley Electric Locomotive for Copper Mine The locomotive is a new product specially designed for large mines. It applies IGBT speed control way, realizes smooth starting and low failure rate, and is a new- generation energy efficient product. Main features include: small outer diamensions, short wheel base, small turn radius, high speed and strong traction force. V-shape rubber damps are used on this locomotives in order to bear viration and impact from lengthways, vertical and transverse directons. The sails are elastic rubber plates which can ensure a reduced shock in operation. total weight (t) : 14 ton Track gauge (mm) : 600.762.900 Traction (KN) : 26.68 Max. Traction (KN) : 34.3 Speed(km/h) : 12.87 Power (KW) : 52*2 Dimensions Length(mm) : 4800 Width(mm) : 1060,1222or 1360 Height(mm) : 1700 Wheelbase (mm) : 1700 Wheel diameter (mm) : 760 Min Curve radius (m) : 12 Controller : Resistencia or IGBT Braking method : Mechanical Advantages of our product 1.Using high-quality steel plates, special rust removal process make sure it more anti-corrosion and suitable for harsh mining environment. 2. Producing motors ourselves, using high lever insulation material and pure copper, ensure the powerful traction force, and suitable for harsh mining environment. 3.Gear anastomosis surface to reach more than 80%, which is far more exceeding the standard. 4.Professionally designed and adjusted frame ensure safe driving and avoids falling off rails. 5.A variety of braking methods can be choose, air brake, hydraulic brake, electric brake, mechanical brake to ensure the safety drive. 6. 40 years richful experience with the ability to design and make customized product according to your requirements. 7. Proving factory online-visiting Factory Test Mining Locomotive test 1.Before Running the locomotive,carry out gear debugging, lighting, gear, and brake adjustment etc.To ensure the normal operation of the locomotive. 2.Carry out a tensile test before leaving the factory to ensure the load performance of the locomotive meets the standard. Our design standards generally exceed the national standard by 10%-20%. 3.Carry out different type running test before leaving the factory to ensure the performance and normal operation of the whole locomotive. It can adapt to various harsh conditions under simulated working conditions. Motor test The motor has to go through many inspection procedures before leaving the factory, and each motor has to be carried out with load running experiments. Explosion-proof motors are carried out with water pressure test. All the test of motor is to ensure that can adapt to harsh working conditions. Cases 1. A good feedback of our lithium battery locomotive from a client of Latin America 2. In order to solve the exist problems of lead-acid batteries. More than 30 lead-acid battery electric locomotives in this large mining were changed into lithium battery electric locomotives, which improved the work enthusiasm and production efficiency of employees, reduced costs,and more environment- friendly. 3. The mining rock drill car designed by Sunward Co., has a small size and simple structure, so the space for placing the lithium battery on the body is very limited. According to the limitation size, our company design a lithium power supply power plan, which perfectly solves the problem of lithium power supply space. In order to adapt to the special industrial and mining environment and improve transportation efficiency, a batch of 2.5-ton lithium battery electric locomotives are designed to Myanmar Clients. FAQ What's your product advantages? We have more 40 years experience in this field so that we could design or produce the locomotive as your requirement. We could also provide online service to teach you how to operate and maintain the locomotive. The most important thing that we produce the main part of the locomotive- The traction motors. we could guarantee the power of the locomotive. 1.Pre-sales Service: The wide product range enables us to provide our customers with individual machines or complete processing plants. Based on our customer's request and budget, our experts make efficient and reliable solutions, and we produce strictly follow customers' order. What's more, every customer has the chance to visit the working machine in the site before placing the order. 2.After-sales Service: Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the quarry site to help install the customer's plants.Necessary training about machine daily maintenance to local workers is provided also. 3.Methods of Payment: T/T (Telegraphic Transfer) or Western Union or L/C at sight Handling time for an order: Within 10 days supplied from stock 4.Shipping method: Sample order: we suggest Courier express like DHL/UPS/FEDEX or by air Bulk order: we suggest by air or by sea. 5.Quality Control: We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 6.After Services: a. Our sales team will response for your question within 24 hours (Holiday is Excluded) b. Technical Support will be available in any time c. Free replacement will provide once the failure confirmed caused by our product quality

Minimum Order: 1 bags

2.5 Ton Battery Powered Mining Accumulator Locomotive for Gold Mine We are the original supplier of mining locomotive and its spareparts, we could provide you with the online visit of our factory! Battery electric locomotive is a kind of track traction equipment powered by batteries, which is generally used in mines. There are two types of battery electric locomotives, explosion-proof type and ordinary type. The explosion- proof type is mainly used in coal mines. There are also many options in terms of speed regulation and braking methods. Speed control methods include resistance speed control, chopping speed control and frequency conversion speed control. Braking methods include pure mechanical braking, hydraulic braking and compressed air braking. In addition, electric braking can also be selected as an auxiliary braking method. Total weight (t) : 2.5 Track gauge (mm) : 600,762 or 900 Traction (KN) : 2.55 Max. Traction (KN) : 6.13 Speed(km/h) : 4.54 Battery Voltage (V) : 48 Battery Capacity (Ah) : 330 Power (KW) : 3.5*1 Dimensions Length(mm) : 2360 Width(mm) : 914,1076 or 1214 Height(mm) : 1550 Wheelbase (mm) : 650 Wheel diameter (mm) : 460 Min Curve radius (m) : 5 Controller : Resistance or IGBT Braking method : Mechanical Brake Advantages of our product 1.Using high-quality steel plates, special rust removal process make sure it more anti-corrosion and suitable for harsh mining environment. 2. Producing motors ourselves, using high lever insulation material and pure copper, ensure the powerful traction force, and suitable for harsh mining environment. 3.Gear anastomosis surface to reach more than 80%, which is far more exceeding the standard. 4.Professionally designed and adjusted frame ensure safe driving and avoids falling off rails. 5.A variety of braking methods can be choose, air brake, hydraulic brake, electric brake, mechanical brake to ensure the safety drive. 6. 40 years richful experience with the ability to design and make customized product according to your requirements. 7. Proving factory online-visiting Product Factory Test Mining Locomotive test 1.Before Running the locomotive,carry out gear debugging, lighting, gear, and brake adjustment etc.To ensure the normal operation of the locomotive. 2.Carry out a tensile test before leaving the factory to ensure the load performance of the locomotive meets the standard. Our design standards generally exceed the national standard by 10%-20%. 3.Carry out different type running test before leaving the factory to ensure the performance and normal operation of the whole locomotive. It can adapt to various harsh conditions under simulated working conditions. Motor test The motor has to go through many inspection procedures before leaving the factory, and each motor has to be carried out with load running experiments. Explosion-proof motors are carried out with water pressure test. All the test of motor is to ensure that can adapt to harsh working conditions. Clients Feedback and Cases 1. A good feedback of our lithium battery locomotive from a client of Latin America 2. In order to solve the exist problems of lead-acid batteries. More than 30 lead-acid battery electric locomotives in this large mining were changed into lithium battery electric locomotives, which improved the work enthusiasm and production efficiency of employees, reduced costs,and more environment- friendly. 3. The mining rock drill car designed by Sunward Co., has a small size and simple structure, so the space for placing the lithium battery on the body is very limited. According to the limitation size, our company design a lithium power supply power plan, which perfectly solves the problem of lithium power supply space. In order to adapt to the special industrial and mining environment and improve transportation efficiency, a batch of 2.5-ton lithium battery electric locomotives are designed to Myanmar Clients. FAQ What's your product advantages? We have more 40 years experience in this field so that we could design or produce the locomotive as your requirement. We could also provide online service to teach you how to operate and maintain the locomotive. The most important thing that we produce the main part of the locomotive- The traction motors. we could guarante the power of the locomotive. Pre-sales Service: The wide product range enables us to provide our customers with individual machines or complete processing plants. Based on our customer's request and budget, our experts make efficient and reliable solutions, and we produce strictly follow customers' order. What's more, every customer has the chance to visit the working machine in the site before placing the order. After-sales Service: Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the quarry site to help install the customer's plants.Necessary training about machine daily maintenance to local workers is provided also. Methods of Payment: T/T (Telegraphic Transfer) or Western Union or L/C at sight Handling time for an order: Within 10 days supplied from stock Shipping method: Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or by air Bulk order: we suggest by air or by sea. Quality Control: We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. After Services: a. Our sales team will response for your question within 24 hours (Holiday is Excluded) b. Technical Support will be available in any time c. Free replacement will provide once the failure confirmed caused by our product quality

Minimum Order: 1 bags

10 Ton Trolley Electric Locomotive for Underground Mine The model has two kinds of working rated voltage:250v and 550V. It applies primary driving way, speed control of IGBT chopping wave type or resistor type or VF type. Main fetures include:short wheel base, high stiffness of vehicle body, and good shockproof performance. The braking type is mechanical or electric braking. Both mechanical braking and electric brking have safe and reliable effect. Adhesive weight (t) : 10 ton Track gauge (mm) : 600.762.900 Traction (KN) : 13.05 18.93 Max. Traction (KN) : 24.5 Speed(km/h) : 11, 10.5 Power (KW) : 21*2 30*2 24*2 Dimensions Length(mm) : 4550, 4650 Width(mm) : 1050,1212or 1350 Height(mm) : 1600 Wheelbase (mm) : 1100 Wheel diameter (mm) : 680 Min Curve radius (m) : 7,10 Controller : Resistencia or IGBT Braking method : Mechanical Advantages of our product 1.Using high-quality steel plates, special rust removal process make sure it more anti-corrosion and suitable for harsh mining environment. 2. Producing motors ourselves, using high lever insulation material and pure copper, ensure the powerful traction force, and suitable for harsh mining environment. 3.Gear anastomosis surface to reach more than 80%, which is far more exceeding the standard. 4.Professionally designed and adjusted frame ensure safe driving and avoids falling off rails. 5.A variety of braking methods can be choose, air brake, hydraulic brake, electric brake, mechanical brake to ensure the safety drive. 6. 40 years richful experience with the ability to design and make customized product according to your requirements. 7. Proving factory online-visiting Factory Test Mining Locomotive test 1.Before Running the locomotive,carry out gear debugging, lighting, gear, and brake adjustment etc.To ensure the normal operation of the locomotive. 2.Carry out a tensile test before leaving the factory to ensure the load performance of the locomotive meets the standard. Our design standards generally exceed the national standard by 10%-20%. 3.Carry out different type running test before leaving the factory to ensure the performance and normal operation of the whole locomotive. It can adapt to various harsh conditions under simulated working conditions. Motor test The motor has to go through many inspection procedures before leaving the factory, and each motor has to be carried out with load running experiments. Explosion-proof motors are carried out with water pressure test. All the test of motor is to ensure that can adapt to harsh working conditions. FAQ What's your product advantages? We have more 40 years experience in this field so that we could design or produce the locomotive as your requirement. We could also provide online service to teach you how to operate and maintain the locomotive. The most important thing that we produce the main part of the locomotive- The traction motors. we could guarantee the power of the locomotive. 1.Pre-sales Service: The wide product range enables us to provide our customers with individual machines or complete processing plants. Based on our customer's request and budget, our experts make efficient and reliable solutions, and we produce strictly follow customers' order. What's more, every customer has the chance to visit the working machine in the site before placing the order. 2.After-sales Service: Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the quarry site to help install the customer's plants.Necessary training about machine daily maintenance to local workers is provided also. 3.Methods of Payment: T/T (Telegraphic Transfer) or Western Union or L/C at sight Handling time for an order: Within 10 days supplied from stock 4.Shipping method: Sample order: we suggest Courier express like DHL/UPS/FEDEX or by air Bulk order: we suggest by air or by sea. 5.Quality Control: We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 6.After Services: a. Our sales team will response for your question within 24 hours (Holiday is Excluded) b. Technical Support will be available in any time c. Free replacement will provide once the failure confirmed caused by our product quality

Minimum Order: 1 bags

What is closed-loop cooling? A closed-loop water cooling system maintains optimal temperatures inside a sealed enclosure while keeping warm ambient air, moisture, dust and other airborne contaminants out. By circulating cool, clean air within the electrical enclosure (and through the heat-generating components), closed- loop cooling systems help protect sensitive electronic components and extend their life. In a typical closed-loop air conditioner, heat is transferred from the enclosure components by circulating air around and through them. The air is then cooled, dehumidified and returned to the enclosure without allowing air from outside the enclosure to enter. Heat is removed from the air inside the air conditioning unit and discharged through the vapor compression refrigeration cycle. Specification： Model：TY-35/110T Power Input：380v, 3ph, 50hz Cooling Capacity：175，000/550,000 kcal/h Fan Power：4kw x2 Fan Air Flow：80000 m3/h x 2 Spray Pump：3kw, 150m3/h, 5m Main Pump：15kw, 100m³/h, 36m (for Inductors or transformer)7.5kw, 50m³/h, 32m (for induction power supply) Inlet/Outlet：DN125/DN80 Working Pressure：0.1 to 0.3 MPa closed loop water cooling system Features:

Minimum Order: 1 bags

Billet/Bar Induction Total Heating Equipment Induction Heating Equipment Supplier Billets range from Φ25 to Φ150 and temperature range from 900℃ to 1300 ℃ can be performed by this induction heating line. Induction heating is widely used to heat metals prior to hot forming by forging. Progressive multistage horizontal heating is popular for small- and medium-size billets (usually less than 150 mm in diameter) TY Induction Billet Heating Systems for Forging enables today’s forging plants to heat up rapidly material while ensuring uniform temperature and high efficiency. TY Induction can offer a complete Billet Total Heating Induction Equipment with full-automatic or Semi-automatic material handling machine, water cooling system and temperature control. TY Induction Power Supplies use IGBT technology and LC series resonant circuit. 100% launch up under any load conditions and 24 hours operation. Self-Diagnostics with Fault LED’s & Alarm Indicator. Why Induction Heating? Induction heating is easy to set up, offers fast heat-up times, and provides superior heating efficiency, accuracy, and part temperature uniformity. In addition, induction offers safety advantages over open flame and resistance heating methods. Applications: Preheating and maintaining weld temperatures Hydrogen baking Post-weld heat treatment (PWHT) up to 1450° F Cold shrink fit-up processes Various other applications requiring heat Industries: Oil and gas Structural Power Plants Petrochemical/refineries Process/Powe , r Pipelines Pressure Vessels Shipyards

Minimum Order: 1 bags