Mining Machinery

PRODUCT DESCRIPTION ASIC Bitmain Miner BTC T2T 25T 26T 27T 29-36T Used Innosilicon T2T 2200W BTC Asic Miners Innosilicon T2T 25T 26T 27T 29-36T 0 Algorithm:SHA-256 Power Consumption:2200W Hashrate:30Th/s 37Th/s Video Memory Capacity:≥ 1024MB Type:innosilicon T2T Rating Power:> 1000W Output Interface Type:DVI Memory Interface:128 Bit Memory Clock(Mhz):60Mhz Interface Type:USB 3.1 Video Memory Type:DDR5 Manufacturer:innosilicon W , arranty(Year):Other After-sales Service:Others Product name:innosilicon T2T 2200W BTC Asic Miners Innosilicon T2T 25T 26T 27T 29-36T 1 2200W BTC Asic Miners Innosilicon T2T 25T 26T 27T 29-36T 22200W BTC Asic Miners Innosilicon T2T 25T 26T 27T 29-36T 32200W BTC Asic Miners Innosilicon T2T 25T 26T 27T 29-36T 42200W BTC Asic Miners Innosilicon T2T 25T 26T 27T 29-36T 52200W BTC Asic Miners Innosilicon T2T 25T 26T 27T 29-36T 6 2200W BTC Asic Miners Innosilicon T2T 25T 26T 27T 29-36T 7 2200W BTC Asic Miners Innosilicon T2T 25T 26T 27T 29-36T 82200W BTC Asic Miners Innosilicon T2T 25T 26T 27T 29-36T 92200W BTC Asic Miners Innosilicon T2T 25T 26T 27T 29-36T 102200W BTC Asic Miners Innosilicon T2T 25T 26T 27T 29-36T 112200W BTC Asic Miners Innosilicon T2T 25T 26T 27T 29-36T 122200W BTC Asic Miners Innosilicon T2T 25T 26T 27T 29-36T 13

The rake winch is mainly used for ore handling and filling in the pit or open air of metal mines and other mines. It is mainly used for horizontal harrowing, but also for slope harrowing with a small inclination angle, and cannot be used as a lifting device. The driver can operate by hand beside the winch, or use the button to perform distance control from a few meters or even tens of meters away from the winch. The harrowing winch is driven by the steel wire rope wound on the drum to make a reciprocating movement to harrow the material. The following is the parameter table of 2JBP-7.5/2JP-7.5 rake winch. Model: 2JPB-7.5/2JP-7.5 Average pulling force of main wire rope (KN): 8 Wire rope speed Main wire rope (m/s): 1.0 Sub wire rope (m/s): 1.0 Average (m/s): 1.0 Motor Model: YBK3-132M-4/Y132M-4 kW: 7.5 Main drum Rope capacity (m): 45 Drum diameter (mm): 205 Drum width (mm): 80 Main wire rope Diameter (mm): 10 Structure: 6×19 Minimum breaking force (KN): 55.8

Minimum Order: 1 bags

Volume: 1(m³) Nominal loading: 2000(kg) Maximum loading: 2500(kg) Gauge: 600(mm) Length: 1970(mm) Width: 1070(mm) High: 1250(mm) Wheel base: 600(mm) Wheel diameter: 300(mm) Haule height: 320(mm) Traction: 60(kN) Minimum plane operating radius: 9(m) Body weight: 680(kg) Unloading angle: 40°

Minimum Order: 1 bags

The wheel mill achieves the effect of mechanical force activation through the functions of mechanical mechanics such as rolling, pressing, squeezing, and rubbing. The structure of the original mixed material becomes the active material through the wheel milling, thereby increasing the strength of the product. This is not possible with other types of mixers. Comparable. It is suitable for mixing various wet and dry materials and colloids such as refractory mud, clay, fly ash, slag, tailings slag, molding sand, etc., and is widely used in refractory materials, ceramics, building materials and other industries. The rolling and mixing effect is very good, the noise is low, the production efficiency is high, the energy-saving effect is significant, the sealing performance is good, the environmental pollution is not, and the adaptability is strong. This industrial charcoal powder grinding machine also named the wheel grinder mixer, is specially designed for crushing charcoal pieces into fine charcoal powder. This wheel charcoal grinder mainly can grind charcoal powder and even mix them with the binder, water, etc. Then the processed charcoal powder can be used for further briquetting to make BBQ charcoal or shisha charcoal. https://www.charcoal-machines.com , /wheel-grinder-mixer-charcoal-powder-grinding- , machine.html

Honeycomb coal briquette machine is to regard the well-processed coal dust as raw material, after crush, mix, and then compress to coal briquettes. This good quality iron raw coal charcoal honeycomb briquette machine uses iron powder charcoal/raw coal charcoal as raw materials. But, at first, the raw materials should be crushed into small pieces (the diameter < 1 mm). And this machine has a large capacity, so it is high efficiency. The holes on the surface of the coal briquette make them can be easily and completely burned, reducing energy waste. At the same time, this machine owns a lot of molds, and you can change the molds easily per your special needs. After many improvements, our honeycomb coal machine has the advantages of reasonable structure, high finished product density, superior performance and long service life. https://www.charcoal-machines.com/coal-an , d-charcoal-extruder-machine.html

The biomass sawdust briquette machine can convert the wood chips&shavings, rice&peanut husks, bagasse, and other wood materials into hollow-rod solid fuel(Biomass Charcoal) under high temperature and pressure conditions. Compared to normal wood, this kind of biomass charcoal has advantages of easy ignition, high calorific value (boost 20% or more), less pollution, high specific gravity, easy storage and transport. This machine can make more use of agricultural and forestry residues like crop straw or wood scraps. https://www.charcoal-machines.com/bioma , ss-sawdust-briquette-machine.html

Model NO. Zwy50 Type Small Loader Keyword Mucking Machine Product Name 50m3 Loading Capacity Mucking Machine Motor Power 11kw Speed/H 1.45 Weight 2700 , kg Application Dimensions of Place 1.8*1.8m Application Slope ≤5° Min Turn Radius 5m Unloading Height 1200mm Unloading Distance 1300mm Digging Width 2200 Application Mining, Tunnel Type Name Zwy50 Series Mucking Loader Transmission Type Belt Transmission Material Steel Trademark , YUTONG Transport Package Naked Package Specification ISO Origin Hunan

Minimum Order: 1 bags

The carbonization furnace is a kind of equipment that can carry out dry distillation and anaerobic carbonization of wood materials containing carbon under high-temperature conditions in the furnace. During the carbonization of the material, a large number of combustible gases such as carbon monoxide, methane, and oxygen will be produced. Our carbonization furnace adopts advanced technology to recover, purify, and cyclically burn these combustible gases. This technology solves the problems of environmental pollution and heat energy required in the process of carbonization of ordinary carbonization furnaces. The carbonized material has the advantages of high calorific value, no smoke during combustion, no explosion, and environmental protection. Our carbonization furnace has the advantages of reasonable structure, energy saving, fast cooling speed, good charcoal quality, and a short production cycle. It is an ideal equipment for the carbonization of wood materials. https://www.charcoal-machines.com/ca , rbonization-furnace.html

Narrow Gauge Underground Mining Wagons Manufacturer Supplies Price Application, characteristics and working environment of bucket-tipping mine car The bucket-tipping mine car is a narrow-gauge railway transportation vehicle for transporting coal, ore, ballast and other bulk materials in the mine. Generally, it must be tract by a locomotive or a winch. According to different structures and unloading methods, they are divided into four categories: bucket-tipping mine car, fixed mine car, single-side curved rail dumping mine car, and bottom-dumping mine car. The main features of the bucket-tipping mine car: The bucket-tipping mine car does not need any auxiliary facilities, can automatically flip left and right, is flexible and light. The frame is a metal structure, which can withstand the traction force, ultromotivity, collision force between mine cars, and rail impact force; This type of mine car has the advantages of firm structure, beautiful appearance, reliable performance, flexible and stable operation, etc. The frame of the mine car adopts a riveted welding structure, which reduces the influence of gravity on the mine car and increases the service life of the mine car. The mine car is guaranteed to run smoothly whether in a bend or a straight. This series of mining wagon are widely used for underground and surface coal transportation in coal mines,iron ore, phosphate mines, etc., It is commonly used transportation equipment such as coal mines. K........Represents the mining vehicle F........Represents bucket-tipping mine car V/U........Represents the shape of the car box, V-shaped or U-shaped 0.75/1.0........Represents the volume of the car -6.......Represents the gauge used by the car Technical performance table of bucket-tipping mine car Volume Nominal loading Maximum loading Gauge Dimensions Wheel base Wheel diameter Haule height Traction Minimum plane operating radius Body weight Unloading angle Length Width High m³ kg kg G mm L mm B mm H mm C mm D mm h mm kN m kg ° KFU0.75-6 0.75 1800 1800 600 1700 980 1250 600 300 320 60 9 ≤740 ≥40° KFU1.0-6 1 2000 2500 600 1970 1070 1250 600 300 320 60 9 ≤680 ≥40° Installation and trial operation of bucket-tipping mine car Locking mechanism test Place the mine wagon car on a horizontal track, and open the left and right closing mechanism by manpower many times. The locking mechanism should be simple, reliable, safe, flexible and convenient in operation. Braking mechanism test Place the mine car on a horizontal track and run at a constant speed of 1.5- 3.5m/s. When braking, check the reliability of the mechanism. The components of the mechanism should be firmly connected and braked reliably. When the force leaves the brake pedal The brake shoe should leave the wheel tread in time. Wheel set test The friction wheel or belt is driven by an electric motor, and the wheel is driven to run at a speed of not less than 500r/min for 10 minutes. The wheel rotates flexibly and the resistance torque is not more than 1370N.mm. Locking mechanism test When turning without load, the cart can be turned flexibly, and the unloading angle is ≥40°; after the locking mechanism is opened manually, the mine car can be easily and flexibly tipped to either side of its longitudinal centerline. Buffer spring performance test When metal springs are used, the compression performance test shall be carried out in accordance with the provisions of GB/T1239.4; when rubber springs are used, the compression performance test shall be carried out in accordance with the provisions of GB/T1684. Attention during trial, maintenance and operation of bucket-tipping mine car 1.Before using the mine car, carefully check the appearance for any serious bumps and damage, and the wheels should rotate flexibly without jamming. 2.In the case that the user abides by the rules for the use of mine car, within six months from the date of delivery, if it is damaged or cannot work normally due to poor manufacturing quality, the manufacturer shall repair or replace it free of charge. Attention during trial, maintenance and operation of bucket-tipping mine car 1.Before using the mine car, carefully check the appearance for any serious bumps and damage, and the wheels should rotate flexibly without jamming. 2.In the case that the user abides by the rules for the use of mine car, within six months from the date of delivery, if it is damaged or cannot work normally due to poor manufacturing quality, the manufacturer shall repair or replace it free of charge. FAQ What's your product advantages? We have more 40 years experience in this field so that we could design or produce the locomotive as your requirement. We could also provide online service to teach you how to operate and maintain the locomotive. The most important thing that we produce the main part of the locomotive- The traction motors. we could guarantee the power of the locomotive. 1.Pre-sales Service: The wide product range enables us to provide our customers with individual machines or complete processing plants. Based on our customer's request and budget, our experts make efficient and reliable solutions, and we produce strictly follow customers' order. What's more, every customer has the chance to visit the working machine in the site before placing the order. 2.After-sales Service: Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the quarry site to help install the customer's plants.Necessary training about machine daily maintenance to local workers is provided also. 3.Methods of Payment: T/T (Telegraphic Transfer) or Western Union or L/C at sight Handling time for an order: Within 10 days supplied from stock 4.Shipping method: Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or by air Bulk order: we suggest by air or by sea. 5.Quality Control: We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 6.After Services: a. Our sales team will response for your question within 24 hours (Holiday is Excluded) b. Technical Support will be available in any time c. Free replacement will provide once the failure confirmed caused by our product quality

Minimum Order: 1 bags

PRODUCT DESCRIPTION Antminer S19 PRO 110T 3250w Brand New ASIC Mining Machine Antminer Bitcoin Miner Product Name Antminer S19 pro Hashrate 110T Consumption 3250W Algorithm SHA-256 About S19 pro 110T The computing power of bit Continental's new machine S19 Pro is 110 Th / s, and the energy efficiency ratio is 29.5 J / th ± 5%. S19 series mining machines are equipped with a new generation of customized chips of bit Continental, and the energy efficiency ratio is as low as 23j / th. Push the energy efficiency ratio to the extreme through revolutionary circuit architecture adjustment. Deeply customize and optimize the heat dissipation design, fine temperature control to reduce loss, and match with the new apw12 power supply with high conversion efficiency. The fuselage adopts a new integrated design, the whole machine has ultra-high integration, which is more beautiful, safer and more convenient, and the utilization of mine space is more scientific. If you want more information and discussion, please contact us. Power Supply The Antminer built-in original APW12 PSU for S19 Pro 110TH is the recommended power supply for safe and efficient mining. Antminer S19 Pro comes with 2 x AC input power cables at 10 Amps each. Caution: Wrong input voltage may probably cause miner damaged and shall not be covered by Bitmain’s warranty. Operating Condition: Max temperature 40°C, altitude 0m. When the miner is used at an altitude from 900m to 2000m, the highest operating temperature decreases by 1℃ for every increase of 300m. SHA 256 – Bitcoin Mining Pools (AntPool and Alternatives to Bitmain Antpool)

5 Ton Mining Trolley Electric Locomotive in Narrow Gauge We are the real Mining locomotive factory in china, we could provide you with E-online chat to show your our factory! Trolley Locomotive is applied in the railway transportation for tract wagons,people and other things.The max traction capacity of a 5 ton trolley locomotive could up to 50 ton. C: Locomotive for coal mining J: Trolley electric locomotives Y: Single-end driver's cab G: Steel wheel,resistor for speed control GB: Steel wheel,chopping wave for speed control Adhesive / total weight (t) 5 ton Track gauge (mm) 500.600,762 or 900 Traction (KN) 6.1kN/ 5.74kN Max. Traction (KN) 7.36kN Speed(km/h) 10.6km/h/ 7.5km/h Voltage 250 Power (KW) 7.5KW*2 Dimensions Length(mm) 2700mm/ 2750mm Width(mm) 940,1082 or 1220mm Height(mm) 1550 Wheelbase (mm) 816mm/ 850 mm Wheel diameter (mm) Φ650mm/ Φ520 mm Min Curve radius (m) 5.7-6 m Controller Resistance or IGBT Braking method Mechanical or Hydraulic Brake

Minimum Order: 1 bags

CTY5 Ton Battery Locomotive for coal mine with factory price Using the IGBT or AC frequency controller,stable starting and high traction effort, battery long life, locomotives' low center of gravity. 5 ton Battery locomotive Adhesive / total weight (t) 5 ton Track gauge (mm) 600.762.900 Traction (KN) 7.06 Cty5 Ton Battery Locomotive for Coal Mine with Factory Price Max. Traction (KN) 12.26 Speed(km/h) 7 Voltage (V) 250V Power (KW) 7.5 KWx2 Dimensions Length(mm) 3170 Width(mm) 920,1082or 1220 Height(mm) 1550 Wheelbase (mm) 850 Wheel diameter (mm) 520 Min Curve radius (m) 6 Controller Resistencia or IGB or VF controller Braking method Mechanical/Hydraulic brake FAQ What's your product advantages? We have more 40 years experience in this field so that we could design or produce the locomotive as your requirement. We could also provide online service to teach you how to operate and maintain the locomotive. The most important thing that we produce the main part of the locomotive- The traction motors. we could guarante the power of the locomotive. 1.Pre-sales Service: The wide product range enables us to provide our customers with individual machines or complete processing plants. Based on our customer's request and budget, our experts make efficient and reliable solutions, and we produce strictly follow customers' order. What's more, every customer has the chance to visit the working machine in the site before placing the order. 2.After-sales Service: Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the quarry site to help install the customer's plants.Necessary training about machine daily maintenance to local workers is provided also. 3.Methods of Payment: T/T (Telegraphic Transfer) or Western Union or L/C at sight Handling time for an order: Within 10 days supplied from stock 4.Shipping method: Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or by air Bulk order: we suggest by air or by sea. 5.Quality Control: We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 6.After Services: a. Our sales team will response for your question within 24 hours (Holiday is Excluded). b. Technical Support will be available in any time. c. Free replacement will provide once the failure confirmed caused by our product quality.

Minimum Order: 1 bags

The jaw crusher is a stone crusher. The motor drives the belt and the belt pulley, and moves the jaw up and down through the eccentric shaft. When the jaw rises, the Angle between the toggle plate and the jaw becomes larger, so as to promote the moving jaw plate to the fixed jaw plate.

Minimum Order: 1 bags

Application and Features: 1. Application: melting varied metals like gold, silver, copper, steel, aluminum, lead and zinc 2. Classification: Experimental small furnace , medium frequency furnace, high frequency furnace 3. Adjustable temperature: 0-2000℃ 4. Temperature and melting time needed: depends on different furnace models and metals.

Minimum Order: 1 bags