Mining Machinery

14-Ton Trolley Electric Locomotive for Copper Mine The locomotive is a new product specially designed for large mines. It applies IGBT speed control way, realizes smooth starting and low failure rate, and is a new- generation energy efficient product. Main features include: small outer diamensions, short wheel base, small turn radius, high speed and strong traction force. V-shape rubber damps are used on this locomotives in order to bear viration and impact from lengthways, vertical and transverse directons. The sails are elastic rubber plates which can ensure a reduced shock in operation. total weight (t) : 14 ton Track gauge (mm) : 600.762.900 Traction (KN) : 26.68 Max. Traction (KN) : 34.3 Speed(km/h) : 12.87 Power (KW) : 52*2 Dimensions Length(mm) : 4800 Width(mm) : 1060,1222or 1360 Height(mm) : 1700 Wheelbase (mm) : 1700 Wheel diameter (mm) : 760 Min Curve radius (m) : 12 Controller : Resistencia or IGBT Braking method : Mechanical Advantages of our product 1.Using high-quality steel plates, special rust removal process make sure it more anti-corrosion and suitable for harsh mining environment. 2. Producing motors ourselves, using high lever insulation material and pure copper, ensure the powerful traction force, and suitable for harsh mining environment. 3.Gear anastomosis surface to reach more than 80%, which is far more exceeding the standard. 4.Professionally designed and adjusted frame ensure safe driving and avoids falling off rails. 5.A variety of braking methods can be choose, air brake, hydraulic brake, electric brake, mechanical brake to ensure the safety drive. 6. 40 years richful experience with the ability to design and make customized product according to your requirements. 7. Proving factory online-visiting Factory Test Mining Locomotive test 1.Before Running the locomotive,carry out gear debugging, lighting, gear, and brake adjustment etc.To ensure the normal operation of the locomotive. 2.Carry out a tensile test before leaving the factory to ensure the load performance of the locomotive meets the standard. Our design standards generally exceed the national standard by 10%-20%. 3.Carry out different type running test before leaving the factory to ensure the performance and normal operation of the whole locomotive. It can adapt to various harsh conditions under simulated working conditions. Motor test The motor has to go through many inspection procedures before leaving the factory, and each motor has to be carried out with load running experiments. Explosion-proof motors are carried out with water pressure test. All the test of motor is to ensure that can adapt to harsh working conditions. Cases 1. A good feedback of our lithium battery locomotive from a client of Latin America 2. In order to solve the exist problems of lead-acid batteries. More than 30 lead-acid battery electric locomotives in this large mining were changed into lithium battery electric locomotives, which improved the work enthusiasm and production efficiency of employees, reduced costs,and more environment- friendly. 3. The mining rock drill car designed by Sunward Co., has a small size and simple structure, so the space for placing the lithium battery on the body is very limited. According to the limitation size, our company design a lithium power supply power plan, which perfectly solves the problem of lithium power supply space. In order to adapt to the special industrial and mining environment and improve transportation efficiency, a batch of 2.5-ton lithium battery electric locomotives are designed to Myanmar Clients. FAQ What's your product advantages? We have more 40 years experience in this field so that we could design or produce the locomotive as your requirement. We could also provide online service to teach you how to operate and maintain the locomotive. The most important thing that we produce the main part of the locomotive- The traction motors. we could guarantee the power of the locomotive. 1.Pre-sales Service: The wide product range enables us to provide our customers with individual machines or complete processing plants. Based on our customer's request and budget, our experts make efficient and reliable solutions, and we produce strictly follow customers' order. What's more, every customer has the chance to visit the working machine in the site before placing the order. 2.After-sales Service: Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the quarry site to help install the customer's plants.Necessary training about machine daily maintenance to local workers is provided also. 3.Methods of Payment: T/T (Telegraphic Transfer) or Western Union or L/C at sight Handling time for an order: Within 10 days supplied from stock 4.Shipping method: Sample order: we suggest Courier express like DHL/UPS/FEDEX or by air Bulk order: we suggest by air or by sea. 5.Quality Control: We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 6.After Services: a. Our sales team will response for your question within 24 hours (Holiday is Excluded) b. Technical Support will be available in any time c. Free replacement will provide once the failure confirmed caused by our product quality

Minimum Order: 1 bags

2.5 Ton Battery Powered Mining Accumulator Locomotive for Gold Mine We are the original supplier of mining locomotive and its spareparts, we could provide you with the online visit of our factory! Battery electric locomotive is a kind of track traction equipment powered by batteries, which is generally used in mines. There are two types of battery electric locomotives, explosion-proof type and ordinary type. The explosion- proof type is mainly used in coal mines. There are also many options in terms of speed regulation and braking methods. Speed control methods include resistance speed control, chopping speed control and frequency conversion speed control. Braking methods include pure mechanical braking, hydraulic braking and compressed air braking. In addition, electric braking can also be selected as an auxiliary braking method. Total weight (t) : 2.5 Track gauge (mm) : 600,762 or 900 Traction (KN) : 2.55 Max. Traction (KN) : 6.13 Speed(km/h) : 4.54 Battery Voltage (V) : 48 Battery Capacity (Ah) : 330 Power (KW) : 3.5*1 Dimensions Length(mm) : 2360 Width(mm) : 914,1076 or 1214 Height(mm) : 1550 Wheelbase (mm) : 650 Wheel diameter (mm) : 460 Min Curve radius (m) : 5 Controller : Resistance or IGBT Braking method : Mechanical Brake Advantages of our product 1.Using high-quality steel plates, special rust removal process make sure it more anti-corrosion and suitable for harsh mining environment. 2. Producing motors ourselves, using high lever insulation material and pure copper, ensure the powerful traction force, and suitable for harsh mining environment. 3.Gear anastomosis surface to reach more than 80%, which is far more exceeding the standard. 4.Professionally designed and adjusted frame ensure safe driving and avoids falling off rails. 5.A variety of braking methods can be choose, air brake, hydraulic brake, electric brake, mechanical brake to ensure the safety drive. 6. 40 years richful experience with the ability to design and make customized product according to your requirements. 7. Proving factory online-visiting Product Factory Test Mining Locomotive test 1.Before Running the locomotive,carry out gear debugging, lighting, gear, and brake adjustment etc.To ensure the normal operation of the locomotive. 2.Carry out a tensile test before leaving the factory to ensure the load performance of the locomotive meets the standard. Our design standards generally exceed the national standard by 10%-20%. 3.Carry out different type running test before leaving the factory to ensure the performance and normal operation of the whole locomotive. It can adapt to various harsh conditions under simulated working conditions. Motor test The motor has to go through many inspection procedures before leaving the factory, and each motor has to be carried out with load running experiments. Explosion-proof motors are carried out with water pressure test. All the test of motor is to ensure that can adapt to harsh working conditions. Clients Feedback and Cases 1. A good feedback of our lithium battery locomotive from a client of Latin America 2. In order to solve the exist problems of lead-acid batteries. More than 30 lead-acid battery electric locomotives in this large mining were changed into lithium battery electric locomotives, which improved the work enthusiasm and production efficiency of employees, reduced costs,and more environment- friendly. 3. The mining rock drill car designed by Sunward Co., has a small size and simple structure, so the space for placing the lithium battery on the body is very limited. According to the limitation size, our company design a lithium power supply power plan, which perfectly solves the problem of lithium power supply space. In order to adapt to the special industrial and mining environment and improve transportation efficiency, a batch of 2.5-ton lithium battery electric locomotives are designed to Myanmar Clients. FAQ What's your product advantages? We have more 40 years experience in this field so that we could design or produce the locomotive as your requirement. We could also provide online service to teach you how to operate and maintain the locomotive. The most important thing that we produce the main part of the locomotive- The traction motors. we could guarante the power of the locomotive. Pre-sales Service: The wide product range enables us to provide our customers with individual machines or complete processing plants. Based on our customer's request and budget, our experts make efficient and reliable solutions, and we produce strictly follow customers' order. What's more, every customer has the chance to visit the working machine in the site before placing the order. After-sales Service: Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the quarry site to help install the customer's plants.Necessary training about machine daily maintenance to local workers is provided also. Methods of Payment: T/T (Telegraphic Transfer) or Western Union or L/C at sight Handling time for an order: Within 10 days supplied from stock Shipping method: Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or by air Bulk order: we suggest by air or by sea. Quality Control: We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. After Services: a. Our sales team will response for your question within 24 hours (Holiday is Excluded) b. Technical Support will be available in any time c. Free replacement will provide once the failure confirmed caused by our product quality

Minimum Order: 1 bags

10 Ton Trolley Electric Locomotive for Underground Mine The model has two kinds of working rated voltage:250v and 550V. It applies primary driving way, speed control of IGBT chopping wave type or resistor type or VF type. Main fetures include:short wheel base, high stiffness of vehicle body, and good shockproof performance. The braking type is mechanical or electric braking. Both mechanical braking and electric brking have safe and reliable effect. Adhesive weight (t) : 10 ton Track gauge (mm) : 600.762.900 Traction (KN) : 13.05 18.93 Max. Traction (KN) : 24.5 Speed(km/h) : 11, 10.5 Power (KW) : 21*2 30*2 24*2 Dimensions Length(mm) : 4550, 4650 Width(mm) : 1050,1212or 1350 Height(mm) : 1600 Wheelbase (mm) : 1100 Wheel diameter (mm) : 680 Min Curve radius (m) : 7,10 Controller : Resistencia or IGBT Braking method : Mechanical Advantages of our product 1.Using high-quality steel plates, special rust removal process make sure it more anti-corrosion and suitable for harsh mining environment. 2. Producing motors ourselves, using high lever insulation material and pure copper, ensure the powerful traction force, and suitable for harsh mining environment. 3.Gear anastomosis surface to reach more than 80%, which is far more exceeding the standard. 4.Professionally designed and adjusted frame ensure safe driving and avoids falling off rails. 5.A variety of braking methods can be choose, air brake, hydraulic brake, electric brake, mechanical brake to ensure the safety drive. 6. 40 years richful experience with the ability to design and make customized product according to your requirements. 7. Proving factory online-visiting Factory Test Mining Locomotive test 1.Before Running the locomotive,carry out gear debugging, lighting, gear, and brake adjustment etc.To ensure the normal operation of the locomotive. 2.Carry out a tensile test before leaving the factory to ensure the load performance of the locomotive meets the standard. Our design standards generally exceed the national standard by 10%-20%. 3.Carry out different type running test before leaving the factory to ensure the performance and normal operation of the whole locomotive. It can adapt to various harsh conditions under simulated working conditions. Motor test The motor has to go through many inspection procedures before leaving the factory, and each motor has to be carried out with load running experiments. Explosion-proof motors are carried out with water pressure test. All the test of motor is to ensure that can adapt to harsh working conditions. FAQ What's your product advantages? We have more 40 years experience in this field so that we could design or produce the locomotive as your requirement. We could also provide online service to teach you how to operate and maintain the locomotive. The most important thing that we produce the main part of the locomotive- The traction motors. we could guarantee the power of the locomotive. 1.Pre-sales Service: The wide product range enables us to provide our customers with individual machines or complete processing plants. Based on our customer's request and budget, our experts make efficient and reliable solutions, and we produce strictly follow customers' order. What's more, every customer has the chance to visit the working machine in the site before placing the order. 2.After-sales Service: Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the quarry site to help install the customer's plants.Necessary training about machine daily maintenance to local workers is provided also. 3.Methods of Payment: T/T (Telegraphic Transfer) or Western Union or L/C at sight Handling time for an order: Within 10 days supplied from stock 4.Shipping method: Sample order: we suggest Courier express like DHL/UPS/FEDEX or by air Bulk order: we suggest by air or by sea. 5.Quality Control: We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 6.After Services: a. Our sales team will response for your question within 24 hours (Holiday is Excluded) b. Technical Support will be available in any time c. Free replacement will provide once the failure confirmed caused by our product quality

Minimum Order: 1 bags

With gentle scrubbers and non-drying formula ,Erha’s industrial hand scrub is gentle to the skin and highly effective at removing oil,grease,adhesives and more. We add a non-greasy moisturizer to help soften the skin and keep them from cracking. If you have cracked skin and can’t get it clean, try to use it and watch your hands heal in just a few weeks

Minimum Order: 1 bags

12 Ton Underground Transportation AC Locomotive Powered by Battery Battery electric locomotive is a kind of track traction equipment powered by batteries, which is generally used in mines. There are two types of battery electric locomotives, explosion-proof type and ordinary type. The explosion- proof type is mainly used in coal mines. There are also many options in terms of speed regulation and braking methods. Speed control methods include resistance speed control, chopping speed control and frequency conversion speed control. Braking methods include pure mechanical braking, hydraulic braking and compressed air braking. In addition, electric braking can also be selected as an auxiliary braking method. Adhesive / total weight (t) : 12 ton Track gauge (mm) : 600.762.900 Traction (KN) : 16.48 Max. Traction (KN) : 29.43 Speed(km/h) : 8.7 Battery Voltage (V) : 192V Battery Capacity (Ah) : 560 Power (KW) : 22 KWx2 Dimensions Length(mm) : 5100 Width(mm) : 1050,1212or 1350 Height(mm) : 1800 Wheelbase (mm) : 1220 Wheel diameter (mm) : 680 Min Curve radius (m) : 10 Controller : Resistencia or IGBT Braking method : Mechanical Advantages of our product 1.Using high-quality steel plates, special rust removal process make sure it more anti-corrosion and suitable for harsh mining environment. 2. Producing motors ourselves, using high lever insulation material and pure copper, ensure the powerful traction force, and suitable for harsh mining environment. 3.Gear anastomosis surface to reach more than 80%, which is far more exceeding the standard. 4.Professionally designed and adjusted frame ensure safe driving and avoids falling off rails. 5.A variety of braking methods can be choose, air brake, hydraulic brake, electric brake, mechanical brake to ensure the safety drive. 6. 40 years richful experience with the ability to design and make customized product according to your requirements. 7. Proving factory online-visiting Factory Test Mining Locomotive test 1.Before Running the locomotive,carry out gear debugging, lighting, gear, and brake adjustment etc.To ensure the normal operation of the locomotive. 2.Carry out a tensile test before leaving the factory to ensure the load performance of the locomotive meets the standard. Our design standards generally exceed the national standard by 10%-20%. 3.Carry out different type running test before leaving the factory to ensure the performance and normal operation of the whole locomotive. It can adapt to various harsh conditions under simulated working conditions. Motor test The motor has to go through many inspection procedures before leaving the factory, and each motor has to be carried out with load running experiments. Explosion-proof motors are carried out with water pressure test. All the test of motor is to ensure that can adapt to harsh working conditions. FAQ What's your product advantages? We have more 40 years experience in this field so that we could design or produce the locomotive as your requirement. We could also provide online service to teach you how to operate and maintain the locomotive. The most important thing that we produce the main part of the locomotive- The traction motors. we could guarante the power of the locomotive. 1.Pre-sales Service: The wide product range enables us to provide our customers with individual machines or complete processing plants. Based on our customer's request and budget, our experts make efficient and reliable solutions, and we produce strictly follow customers' order. What's more, every customer has the chance to visit the working machine in the site before placing the order. 2.After-sales Service: Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the quarry site to help install the customer's plants.Necessary training about machine daily maintenance to local workers is provided also. 3.Methods of Payment: T/T (Telegraphic Transfer) or Western Union or L/C at sight Handling time for an order: Within 10 days supplied from stock 4.Shipping method: Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or by air Bulk order: we suggest by air or by sea. 5.Quality Control: We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 6.After Services: a. Our sales team will response for your question within 24 hours (Holiday is Excluded) b. Technical Support will be available in any time c. Free replacement will provide once the failure confirmed caused by our product quality

Minimum Order: 1 bags

7-ton Frequency Control Mining Trolley Locomotive for Sale The model has two kinds of working rated voltage:250v and 550V. It applies primary driving way, speed control of IGBT chopping wave type or resistor type or VF type. Main fetures include:short wheel base, high stiffness of vehicle body, and good shockproof performance. The braking type is mechanical or electric braking. Both mechanical braking and electric brking have safe and reliable effect. Adhesive / total weight (t) : 7 ton Track gauge (mm) : 600.762.900 Traction (KN) : 13.05 15.09 Max. Traction (KN) : 17.2 Speed(km/h) : 11 Power (KW) : 21X2 24X2 Dimensions Length(mm) : 4550 Width(mm) : 1050,1212or 1350 Height(mm) : 1600 Wheelbase (mm) : 1100 Wheel diameter (mm) : 680 Min Curve radius (m) : 7 Controller : Resistencia or IGBT Braking method : Mechanical Advantages of our product 1.Using high-quality steel plates, special rust removal process make sure it more anti-corrosion and suitable for harsh mining environment. 2. Producing motors ourselves, using high lever insulation material and pure copper, ensure the powerful traction force, and suitable for harsh mining environment. 3.Gear anastomosis surface to reach more than 80%, which is far more exceeding the standard. 4.Professionally designed and adjusted frame ensure safe driving and avoids falling off rails. 5.A variety of braking methods can be choose, air brake, hydraulic brake, electric brake, mechanical brake to ensure the safety drive. 6. 40 years richful experience with the ability to design and make customized product according to your requirements. 7. Proving factory online-visiting Factory Test Mining Locomotive test 1.Before Running the locomotive,carry out gear debugging, lighting, gear, and brake adjustment etc.To ensure the normal operation of the locomotive. 2.Carry out a tensile test before leaving the factory to ensure the load performance of the locomotive meets the standard. Our design standards generally exceed the national standard by 10%-20%. 3.Carry out different type running test before leaving the factory to ensure the performance and normal operation of the whole locomotive. It can adapt to various harsh conditions under simulated working conditions. Motor test The motor has to go through many inspection procedures before leaving the factory, and each motor has to be carried out with load running experiments. Explosion-proof motors are carried out with water pressure test. All the test of motor is to ensure that can adapt to harsh working conditions.

Minimum Order: 1 bags

Elephant Fluid Power: Provide Dakin series hydraulic replacement parts. Elephant Fluid Power: guarantee quality and appropriate prices, and perfect after-sales service. Details of dakin spare parts Dakin Series 1 Model: OPV1-23 PUMP Dakin Series 2 Model: V15/18/23/38/50/70 VD2-15A VD5-15A MF18 PUMP Dakin Series 3 Model: PVD21/22/23/24 PUMP Dakin Series 4 Model: P36-A3 Elephant Fluid Power is manufacturing full sereis of replacement Rexroth piston pump parts for remanufacturing or repairing pumps in construction machinery and industry application. All spare parts of rexroth hydraulic pump parts are produced in accordance with genuine parts, drawings. Elephant Fluid Power gets lots of positive responses from aftersales market about our parts quality and service. Attribute of Dakin Series Hydraulic Pump Parts Attribute Specifications Material Cast/Ductile iron, steel, bronze and others Types Replacement parts for hydraulic piston pump Function Completely interchangeable with original pump Parts name Cylinder block, piston, retainer plate, ball guide, valve plate, drive shaft, swash plate and more Processing technic Cutting, lathe, machining center, heat treatment, grind, honing, burring and so on Trademark Elephant Fluid Power, Neutral label, or according to client's requirement As one of hydraulic equipment suppliers, we have types of related products for sale, anything you need, please contact us.

Minimum Order: 1000

Elephant Fluid Power: We offer hawe directional spool valve series piston pump. Elephant Fluid Power: guarantee quality and appropriate prices, and perfect after-sales service. Details of Control Valve For HAWE V30D Series Piston Pump Model: V30D45/75/95/115/140/160/250/250(NEW) PUMP Model: V60N-60/90/110 PUMP Model: HAWE34（PVMP34） Attribute of Control Valve For HAWE V30D Series Piston Pump Actuator: Electric Usage: Safety, Flow Control Application: Industrial Usage Delivery: 3-10 Days Quality: 100% Compatible with The Roiginal One Transport Package: Carton Box Elephant Fluid Power is a professional manufacturer and distributor of Hydraulic components which are widely applied to engineer construction, agriculture, marine, mining, etc. All of the products are of High quality. Including the Hydraulic pumps, hydraulic motor, Pump spare parts, Motor spare parts, Hydraulic Valve, Steering Unit... If you want to know more types of hydraulic pumps and motors, please visit our website.

Minimum Order: 1000

Elephant Fluid Power: Provide eaton control valve series piston pump. Elephant Fluid Power: guarantee quality and appropriate prices, and perfect after-sales service. Details of Control Valve For Eaton Series PVH131 Piston Pump Eaton Vickers Series 1 Model: 33/39/46/54/64/76 3321(3331)/4621(4631)/5421(5431) 6423 7620(7621) PUMP Eaton Vickers Series 2 Model: 70122/72400/78461/78462 PUMP Eaton Vickers Series 3 Model: PVXS060/090/130/180/250 PUMP Eaton Vickers Series 4 Model: PVE12/19/21 PUMP Eaton Vickers Series 5 Model: TA19/MFE19 PUMP Eaton Vickers Series 6 Model: PVM 018/020/045/050/057/063/074/ 081/098/106/131/141 PUMP Eaton Vickers Series 7 Model: PVH45 / 57/74/98 / 131/ 141 PUMP Eaton Vickers series 8 models: PVB5/6/10/15/20/29/38/45/90 PUMP Eaton Vickers Series 9 Model: 72400 (72403) Eaton is one of the most famous manufacturers of piston pump in the world. Elephant Fluid Power is manufacturing full sereis of replacement Rexroth piston pump parts for remanufacturing or repairing pumps in construction machinery and industry application. All spare parts of Rexroth pison pumps are produced in accordance with genuine parts, drawings. Elephant Fluid Power gets lots of positive responses from aftersales market about our parts quality and service. Attribute of Control Valve For Eaton Series PVH131 Piston Pump Material Cast/steel, bronze and others Types Replacement parts for hydraulic piston pump Function Completely interchangeable with original pump Parts name Cylinder block, piston, retainer plate, ball guide, valve plate, drive shaft, swash plate and more Processing technic Cutting, lathe, machining center, heat treatment, grind, honing, burring and so on Trademark Elephant Fluid Power, Neutral label, or according to client's requirement Now the price of hydraulic parts is affordable, if you have needs to buy hydraulic pump parts, please contact us.

Minimum Order: 1000

Model 59: CAT M315, M318, M316C, M315C, M318C, M315D, M318D EXCAVATOR PUMP CAT 623F, 623E, 623G WHEEL TRACTOR CAT 793C, 797B, 797 TRUCK Model 60: CAT 215B, 215C, 219, 219D, 225, 225B, 225D, 227, 229 EXCAVATOR CAT 623E, 623F, 623G WHEEL SCRAPER, CAT 5130, 5130B, 5230 MINING EXCAVATOR, CAT 797 TRUCK CAT D6H, D6R, D7H, D7R, D8N, D8R, B8T, D9R, D9T, D10T, D11R, D11T TRACK-TYPE TRACTOR CAT 844H, 988F, 990H WHEEL LOADER Model 61: CAT D8R, D8N, D8T TRACK-TYPE TRACTOR CAT 973C, 963AlDl mTaRnAufCaKctuLrOerA'sDnEaRmes, numbers, symbles and descriptions are for reference purposes ONLY CAT 583T, 587R, 587T PIPELAYER, CAT 621F, 621G, 627F, 627G, 631G, 637F WHEEL TRACTOR Model 62: CAT 322C, 324D, 325C, 325D, 328D, 330C, 330D, 345C, 345D Model 63: CAT 215B EXCAVATOR, AP-1055B, BG-2455C ASPHALT PAVER CS-573, CP- 663, CS-683, CS-663, CS-76, CP-76, CS-583, CS72 VIBRATORY COMPACTOR 5110B, 5230B MINING EXCAVATOR Model 64: CAT 311B, 312, 312B, 315, 315L, 315B, 317, 317B, 317N, 318B EXCAVATOR MAIN PUMP Model 65: CAT 330D, 330DL, 330DN, 336D, 336DL, 345C, 345CL EXCAFVATOR MAIN PUMP Model 66: CAT M318, M318C, M318D, M320, M322C, M322D EXCAVATOR PUMP CP-663E, 583E, 573E, 533D, 64, 54, 74 VIBRATORY COMPACTOR CB-634C, 534C, 534B, 564D, 535B, 434C, 434B VIBRATORY COMPACTOR CS-663E, 563E, 573D, 573E, 583E, 563D, 583D, 531D, 64 VIBRATORY COMPACTOR CAT D6N TRACK-TYPE TRACTOR PUMP CAT 216, 226, 228 267, 277, 267B, 277B MULTI TERRAIN LOADER HYDROSTATIC PUMP Model 67: CAT M320, M322C, M322D, 350, 365C, 375 EXCAVATOR CAT 550, 570, 580, 550B, 560B, 570B, 580B WHEEL HARVESTER CAT 990, 990H WHEEL LOADER CAT 5080 FRONT SHOVEL, CAT 793D, 797B TRUCK CAT 844 WHEEALll mDaOnZuEfaRcturer's names, numbers, symbles and descriptions are for reference purposes ONLY Model 68: CAT 385B, 385C EXCAVATOR, 5090B FRONT SHOVEL Model 69: CAT 365C, 385B, 385C EXCAVATOR, 5090B FRONT SHOVEL Model 70: CAT PS-150B, 200B, 150C, 360B, 290B, 360C PNEUMATIC COMPACTOR CAT IT14G, INTEGRATED TOOLCARRIER CAT 914G WHEEL LOADER CAT D4C, D5C, D6K TRACK TYPE TRACTOR CAT 939C, 953C, 953D, 963, 963C TRACK LOADER Advantages of Cat Control Valve SBS80 Series Piston Pump 1. German CNC hydraulic equipment 2. The best quality non-ferrous metal raw materials 3. Strict quality inspection standards 4. The most competitive price 5. Best after-sales service 6. Fastest shipping 7. Imported rubber, high quality As one of hydraulic equipment suppliers, we will provide more types of high quality products for sale, if you have needs, please contact us.

Minimum Order: 1000

Elephant Fluid Power produces and provides plunger pumps, motors, pump accessories, and reducers for concrete pump trucks, mixer truck production, refurbishment, repair, and maintenance. We have many varieties, complete specifications, good quality, and fast delivery. Can better meet the needs of industries such as earthmoving machinery and construction equipment. Types Of Construction Machinery Spare Parts Hydraulic System of Concrete Pump Truck Concrete mixer truck PMB7.5, PMP7.5sp reducer Concrete Mixer Truck Reducer PMB 7.1R Concrete Mixer Truck Reducer PMB7.5, PMP7.5sp Concrete Mixer Truck Reducer P4300 Concrete Mixer Truck Reducer P3301 Concrete Mixer Truck Reducer CML10, CML16 Reducer Concrete Mixer Truck Reducer PLM-9, PLM-7 Reducer Bonfiglioli Concrete Mixer Truck Reducer TOP P90S Concrete Tank Car Reducer Concrete Mixer Truck DD33 Reducer Eaton Concrete Tanker Oil Pump Motor 5433-138, 5423-518 Case Study Of Construction Machinery Spare Parts Construction Machinery Spare Parts Case Elephant Fluid Power produces stirring motor BMH500 (replaces OMH500) of the same quality as the original, A11VLO, A4VG series plunger pumps, which are used for pump truck production, repair, maintenance and refurbishment, reducing sales and end-user production costs and increasing productive forces. Elephant Fluid Power has a fast delivery time, provides good technical support and after-sales service, and reduces customers' worries. The Guiding Of Construction Machinery Spare Parts The construction machinery parts of Elephant Fluid Power mainly include EATON 64, 54, 90R, A4VTG, PV series and reducers used in mixer trucks, A4VG, A11VLO, A2FO, K3V series hyd pump used in pump trucks, etc. Provide more complete hydraulic solutions, better products and services, greatly reduce production costs, and win a good reputation in the world market If you have needs to buy any hydraulic equipment spare parts , please contact us.

Minimum Order: 1000

Constant Pressure Pump Axial piston pump A10V(S)O in swashplate design is used for hydrostatic transmissions in open loop circuits. Description of constant pressure hydraulic pump Name Oil motor of Mixer Truck Specification Howo, Sany, Hino, Auman, Camc, Auman, shacman, Xcmg Truck model Mixer Truck Packing AS PER YOUR REQUEST Delivery Port ANY Port Payment Terms L/C, D/A, D/P, T/T, Western Union, Money Gram Warranty 3 months Features of constant pressure pump Designed primarily for use in mobile applications. The pump operates under self-priming conditions, with tank pressurization, or with an optional built-in charge pump (impeller). A comprehensive range of control options is available matching any application requirement. Power control option is externally adjustable, even when the pump is running. The through drive is suitable for adding gear pumps and axial piston pumps up to the same, i.e. 100% through drive. The output flow is proportional to the drive speed and infinitely variable between qV max and qV min = 0. As a heavy equipment parts dealer, we have types of hydraulic pump parts for sale, if you have needs, please contact us. If you want to know more types of piston pump parts, please visit our website.

Minimum Order: 1000

The reducer is manufacutred by Elephant fluid Power Co. , Ltd, a famous made in China brand. PMB7. 5, PMP7. 5sp model can be usted to replace Original ZF PMB7. 5, PMP7. 5sp model. We have equivalent quality as the original one, more competitive price, delivery fast, and best after-sales services. ELEPHANT Fluid Power is a hydraulic power expert integrating professional concrete mixer (pump truck) hydraulic system supporting, maintenance and spare parts supply. ELEPHANT Fluid Power is a hydraulic power expert integrating professional concrete mixer (pump truck) hydraulic system supporting, maintenance and spare parts supply. The company has long-term supply of PMP7. 5sp reducer assembly, mixer truck PMP reducer bearing oil seal, PMP7. 5sp reducer bearing oil seal, PMP6. 5S/PMP7. 0S/PMP7. 5sp reducer and accessories, mixer truck reducer, Italy Reducer, PMP special bearing oil seal, specific models 800730, 801806, 809280, 40779, 540626AA, 579905A, 579905AA, 801215A, 804312A, bs2B248180, 540626AA. J30CNF, etc. Main models: 6SP reducer assembly, 7SP reducer assembly, PMB6R100 reducer assembly and accessories PMP reducer assembly and accessories: primary/secondary input shaft, housing, sun gear, planetary gear, planet carrier, bearing 248180, various oil seals, various filter elements. One: PMB6SP-Max Output torque: 60000 Reduction ratio i: 99. 9 Maximum output speed (rpm): 2500 Drum mixing capacity (m3) 8 Weight (kg): 270 Lubricating oil capacity (liter): 12 Drum flange Maximum dynamic turntable angle: +/-6 Two: PMB7SP-maximum output torque: 70000 reduction ratio i: 120. 3 maximum output speed (rpm): 2500 drum stirring capacity (m3): 9-10 weight (kg): 290 lubricant capacity (liter): 13 drum flange maximum Dynamic turntable angle: +/-6 3: PMB7bSP-Maximum output torque: 70000 Reduction ratio i: 121. 6, 100. 7, 129. 1 Maximum output speed (rpm): 2500 Drum stirring capacity (m3): 10-12 Weight (kg): 342 Lubricating oil capacity (liter): 15 roller flange maximum dynamic turntable angle: +/-6 Attribute of Concrete Mixer Truck Reducer PMB7.5, PMP7.5sp Application: Machinery, Marine, Agricultural Machinery, Car Name: Concrete Truck Mixer Reducer Steering Position: Rhd, LHD Material: Steel, Iron, Copper and Other Reducer: PMP7.5 Warranty: 12 Months The hydraulic components of concrete machinery (mixer truck, pump truck, towed pump truck) are provided in the long-term spot as follows: German ZF ZF series P3301, P4300, P5300, P7300, P7500, PLM-7, PLM-9 mixer truck reducer assembly Italy PMP series PMB6R100, PMB7A120, PMB7B129, PMB6.5R120, PMB6spR129, PMB7aspR120, PMB7.1R120, PMB7R130, PMB7.1R130, PMB7.2R130, PMB8R140 mixer truck reducer assembly Italy Bonfiglioli series 575L, 577L, 580L mixer truck reducer assembly American SAUER Sauer series TM51.2, TM61.2, TM71.2 mixer truck reducer assembly Italy TOPUNIOU Top series P68, P70S, P75S, P75R, P90 mixer truck reducer assembly Japan DAIKIN series DD33-MF, PK86-BF mixer truck reducer assembly Japan KYB card dumb series RC100, RC102 mixer truck reducer assembly Special bearing and oil seal for mixer truck reducer 800730, 801806, 248180, 804312A, 809280, 537176, PLC59/5, 40779, 5313D11, 540626AA, 23222, 579905A, 32022, 809281 Hydraulic pump series of mixer truck Rexroth Rexroth A4VTG71, A4VTG90, Sauer SPV22, SPV23, T90, PV089, KYB PSVS-90, Ukraine NP71, NP90, NP112, Eaton 4623, 5423, 6423 assembly Mixer hydraulic motor series Rexroth AA2FM68, AA2FM80, AA2FM90, Sauer MF22, MF23, TMM90, MF089, KYB MSF-85, Ukraine MP71, MP90, MP112, Eaton 4633, 5433, 6433 assembly We have types of putzmeister for sale, if you have needs to buy putzmeister , please contact us. If you want to know more types of putzmeister concrete pump parts , please visit our website. Now the price of hydraulic pumps is low, if you have needs, please leave us a message.

Minimum Order: 1000

8 Ton Lithium Battery Accumulator Locomotive for Gold Mine Battery electric locomotive is a kind of track traction equipment powered by batteries, which is generally used in mines. There are two types of battery electric locomotives, explosion-proof type and ordinary type. The explosion- proof type is mainly used in coal mines. There are also many options in terms of speed regulation and braking methods. Speed control methods include resistance speed control, chopping speed control and frequency conversion speed control. Braking methods include pure mechanical braking, hydraulic braking and compressed air braking. In addition, electric braking can also be selected as an auxiliary braking method. Adhesive / total weight (t) : 8 ton Track gauge (mm) : 500.600.762.900 Traction (KN) : 11.18 or 12.83 Max. Traction (KN) : 19.62 Speed(km/h) : 6.2~7.8 Battery Voltage (V) : 110~140V Battery Capacity (Ah) : 440 Power (KW) : 11 or 15 KWx2 Dimensions Length(mm) : 4420 Width(mm) : 920,1082 or 1220 Height(mm) : 1600 Wheelbase (mm) : 1100 Wheel diameter (mm) : 680 Min Curve radius (m) : 7 Controller : Resistencia or IGBT Braking method : Mechanical or air brake Advantages of our product 1.Using high-quality steel plates, special rust removal process make sure it more anti-corrosion and suitable for harsh mining environment. 2. Producing motors ourselves, using high lever insulation material and pure copper, ensure the powerful traction force, and suitable for harsh mining environment. 3.Gear anastomosis surface to reach more than 80%, which is far more exceeding the standard. 4.Professionally designed and adjusted frame ensure safe driving and avoids falling off rails. 5.A variety of braking methods can be choose, air brake, hydraulic brake, electric brake, mechanical brake to ensure the safety drive. 6. 40 years richful experience with the ability to design and make customized product according to your requirements. 7. Proving factory online-visiting Mining Locomotive test 1.Before Running the locomotive,carry out gear debugging, lighting, gear, and brake adjustment etc.To ensure the normal operation of the locomotive. 2.Carry out a tensile test before leaving the factory to ensure the load performance of the locomotive meets the standard. Our design standards generally exceed the national standard by 10%-20%. 3.Carry out different type running test before leaving the factory to ensure the performance and normal operation of the whole locomotive. It can adapt to various harsh conditions under simulated working conditions. Motor test The motor has to go through many inspection procedures before leaving the factory, and each motor has to be carried out with load running experiments. Explosion-proof motors are carried out with water pressure test. All the test of motor is to ensure that can adapt to harsh working conditions. Cases 1. A good feedback of our lithium battery locomotive from a client of Latin America 2. In order to solve the exist problems of lead-acid batteries. More than 30 lead-acid battery electric locomotives in this large mining were changed into lithium battery electric locomotives, which improved the work enthusiasm and production efficiency of employees, reduced costs,and more environment- friendly. 3. The mining rock drill car designed by Sunward Co., has a small size and simple structure, so the space for placing the lithium battery on the body is very limited. According to the limitation size, our company design a lithium power supply power plan, which perfectly solves the problem of lithium power supply space. In order to adapt to the special industrial and mining environment and improve transportation efficiency, a batch of 2.5-ton lithium battery electric locomotives are designed to Myanmar Clients. FAQ What's your product advantages? We have more 40 years experience in this field so that we could design or produce the locomotive as your requirement. We could also provide online service to teach you how to operate and maintain the locomotive. The most important thing that we produce the main part of the locomotive- The traction motors. we could guarante the power of the locomotive. 1.Pre-sales Service: The wide product range enables us to provide our customers with individual machines or complete processing plants. Based on our customer's request and budget, our experts make efficient and reliable solutions, and we produce strictly follow customers' order. What's more, every customer has the chance to visit the working machine in the site before placing the order. 2.After-sales Service: Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the quarry site to help install the customer's plants.Necessary training about machine daily maintenance to local workers is provided also. 3.Methods of Payment: T/T (Telegraphic Transfer) or Western Union or L/C at sight Handling time for an order: Within 10 days supplied from stock 4.Shipping method: Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or by air Bulk order: we suggest by air or by sea. 5.Quality Control: We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 6.After Services: a. Our sales team will response for your question within 24 hours (Holiday is Excluded) b. Technical Support will be available in any time c. Free replacement will provide once the failure confirmed caused by our product quality

Minimum Order: 1 bags