Mining, Metal, Plastic & Glass Machinery

Nickel-Based Precision Alloy Casting Category:Nickel alloy casting Nickel-Based Precision Alloy Casting includes nickel-based soft magnetic alloys, nickel-based precision resistance alloys and nickel-based electrothermal alloys. Common grades are N05500 etc. Nickel-Based Precision Alloy Casting is commonly used in the electronics industry, resistors and other fields.In recent years, it has been widely used in the field of environmental protection and energy development, improving the comprehensive performance of the devices used. Nickel-based alloy refers to an alloy with nickel as the basic element and still has high strength and certain oxidation corrosion resistance at high temperature of 650-1000 ° C. Nickel-based precision alloy is one of them, which includes nickel. Base soft magnetic alloy, nickel base precision resistance alloy, etc. https://www.foundryseiko.com

Minimum Order: 10000

Nickel-based shape memory alloy casting Category:Nickel alloy casting Nickel-based shape memory alloy casting is mainly used in aerospace and biomedical fields. Common grades are N06600 etc. Nickel-based shape memory alloy casting usually uses a vacuum induction furnace to smelt the master alloy to ensure the composition and control the gas and impurity content.Shape memory alloys are made of springs and other devices, and can also be used as fire prevention devices. It can also be used in various sensors. Nickel-based shape memory alloys usually refer to nickel-titanium alloys. By changing the proportion of titanium in the alloy, the recovery temperature of the alloy can be different. Because of the characteristics of shape memory alloys, it is widely used in the fields of aerospace and biomedicine. important role. Shape memory alloys have a shape memory effect, which can restore the shape before deformation at a specific temperature. At present, it plays an important role in the aerospace field and is used as an interface sealing function in pipeline transportation. In addition, it also plays a role in medicine, and can be used as artificial bones, spectacle frames and so on. https://www.foundryseiko.com

Minimum Order: 1 bags

Equipment method: --Foot installment, flange installment --Horizontal type, vertical type.Various of motors or double shafts can be equipped Characteristics： 1). Multi-stage transmission can be adopted, and the reduction ratio is larger. 2). Small size, stable operation and low noise. 3). Reasonable design, easy maintenance, easy to disassemble and install. 4). Reduction ratio of 1:87 can be achieved, and the efficiency is above 94% 5). Reliable and hardened (HRC58 ～ 62), so durable and long life. Cycloidal gear reducer is a novel transmission device that uses the principle of planetary transmission and adopts the cycloidal pin tooth meshing, so it is usually also called planetary cycloidal gear reducer. All transmission devices of the cycloid pin gear reducer can be divided into three parts: input part, deceleration part, output part. The machine is divided into horizontal, vertical, double-shaft and direct- connected assembly methods. Its unique stable structure can replace ordinary cylindrical gear reducer and worm gear reducer in many cases. Therefore, the cycloidal gear reducer is widely used in various industries and fields, and is generally welcomed by customers.

Minimum Order: 100

Cast aluminu-silicon alloys Category:Aluminum alloy casting Cast aluminu-silicon alloys is a process in which aluminum-silicon alloys are processed into products that can be directly used through a casting process. Common grades are A356.0, A413.0 and so on. Cast aluminu-silicon alloys is a very important industrial alloy. It has important uses in the automobile manufacturing industry, high-tech electronics industry, aerospace materials and other products, and is an ideal wear-resistant material. Aluminum silicon alloy may be a reasonably ferroalloy with aluminum and silicon because the main components. Generally, the content of silicon is 11%, and atiny low amount of copper, iron and nickel are added to enhance the strength.Aluminum silicon alloy is employed to manufacture low and medium strength castings with complex shapes, like covering, motor shell, bracket, etc. it's also used as brazing solder. When the silicon content is low (such as 0.7), the ductility of aluminum silicon alloy is sweet, which is usually used as deformation alloy. When the silicon content is high (such as 7%), the filling property of aluminum silicon alloy melt is nice, which is usually used as casting alloy. In the Al Si alloy with silicon content exceeding Al Si eutectic point (silicon 12.6%), when the particle content of silicon is as high as 14.5% ~ 25%, adding a specific amount of Ni, Cu, Mg and other elements can improve its comprehensive mechanical properties. https://www.foundryseiko.com

Minimum Order: 1000

Aluminum-zinc alloy casting Category:Aluminum alloy casting Aluminum-zinc alloy casting has good processing performance, and there are common grades such as AC1A and ZA43. The mechanical properties of aluminum-zinc alloy are similar to brass, and it has good machining properties and can be processed into small metal parts. Common grades are AC1A, ZA43, etc., and the surface treatment effect is good, can adapt to a variety of electroplating processes, and has good corrosion resistance. The mechanical properties of aluminum-zinc alloy are similar to brass, and it has good machining properties and can be processed into small metal parts. Common grades are AC1A, ZA43, etc., and the surface treatment effect is good, can adapt to a variety of electroplating processes, and has good corrosion resistance. The aluminum-zinc alloy alloy has excellent processing performance, the overall comprehensive performance is close to that of lead brass, the surface treatment effect is good, and it has good electrical conductivity. It can be widely used in electronic and electrical industries. The lower one is added, and it is an environmentally friendly material, which can meet most environmental protection requirements. https://www.foundryseiko.com

Minimum Order: 1000

1.WPS whole series shredder use high-quality alloy steel and equipped with D2/DC53 blades,also offer different design solution according to different materials. 2.The series single-shaft shredders were developed with premium quality,wide range of applications, low speed（Main shaft speed：78rpm）, high torque, and low noise. 3.Capacity：300-3000 kg/h 1.Customized Spindle Rotor The W type for soft material and the blade seat type for block material. 2.Rotor Change Angle Rotor can be reuse by change the angle according to the wearing condition, which can saving cost by a lot. 3.External bearing seat. Main shaft and the machine body are sealed by a sealing ring, which effectively prevents the shredded materials from entering the bearing, to prolonging the life of the bearing. 4.Hydraulic Opening System The maintenance time can be saved by adopt of hydraulic system to provide quick screen change.

Minimum Order: 1 bags

Cast aluminum-magnesium alloy Category:Aluminum alloy casting Cast Aluminum-magnesium alloy are widely used in the fields of electronics, automobiles, and aerospace. Common grades are 7A09 etc. The main elements of aluminum-magnesium alloy include aluminum and magnesium. The alloy products have high strength, low density and strong heat dissipation capacity, so they are popular in the fields of electronics, automobiles, and aerospace. Common grades are 5052, 5754, 5083, etc. Aluminum alloys have lower cost, superior performance and stronger product competitiveness. The density of aluminum-magnesium alloy is small, so it is lighter under the same volume, and has a certain strength, which can be used for load-bearing. Aluminum-magnesium alloy has strong heat dissipation, and at the same time, it can resist electromagnetic interference and has strong electromagnetic shielding. Its appearance has a certain degree of beauty, is resistant to corrosion, can maintain a good quality of appearance for a long time, and the material is environmentally friendly, and the waste is recyclable. https://www.foundryseiko.com

Minimum Order: 1000

Category:Aluminum alloy casting Cast Aluminum-copper alloy can be made into forgings, aerospace structural parts, machined products, and more. Common grades are ZL202 and so on. Cast Aluminum-copper alloy belong to 2xx, x series aluminum alloys, and also belong to ZL-2xx aluminum alloys. Heat resistance, high strength.Can be used for high-power equipment packaging materials, heat dissipation components, ceramics and bases, etc. Aluminum-copper alloy is a kind of hard alloy material, and it also has good electrical conductivity. It has high mechanical properties at room temperature and high temperature, and is easy to cast and cut. We can cast 2011, 2024, 2218, 2618 and other different aluminum-copper alloy products. Aluminum-copper alloys are easy to process and can be made into different profiles. Aluminum-copper alloys are usually made of aluminum-copper multi- component alloys by adding a small amount of other elements to meet the application of aluminum-copper alloys in industry, so that they can be used in different environments. Aluminum-copper alloys can replace copper wires as wires in some cases, and can also be used as aerospace structural parts and so on. https://www.foundryseiko.com

Minimum Order: 1000

Category:Copper alloy casting Copper casting, the copper appears rose red as a whole, and after an oxide film is formed on the surface, it appears purple, so it also called red copper.Copper is often used for electrical, thermal, and corrosion-resistant components. Red copper is also called industrial pure copper. Its appearance is purple, so it is also called red copper. It has good electrical conductivity and thermal conductivity, as well as good plasticity and easy processing. We can produce different grades of copper products such as T1, T2, T3. Red copper is not completely pure copper. Generally, some other elements are added to improve the material properties of the product. Red copper products have good electrical conductivity, so they are widely used in the production of electrical and thermal conductivity equipment, such as motor short-circuit rings, electromagnetic heating inductors, etc. In addition, red copper has good welding performance and can be processed for secondary processing. https://www.foundryseiko.com

Minimum Order: 1 bags

Our series pvc Coating Machine mainly used for Film coating : release film, protective film, scratch-resistant film. Hot stamping film, laser holographic film, aluminized transfer, thermal transfer film, coating and other coating products, production, ,BOPP,CPP ,PET ,PP ,PVC tape, foam stickers, PE, non-woven, PU coating, , Metallic yarn coating The paper coating : It’s suitable for the production of paper, white cardboard, duplex cardboard, synthetic paper, PP paper, PET sheet, high light waterproof photo paper, matte photo paper, cast coated photo paper, RC high glossy photo paper, carbonless paper, PP Synthetic Paper and other high-tech information industry paper. Foil coating : Household Foil, Pharmacy Foil, Cold Forming Medicine Package Foil, Food Soft Packing Foil, Container Foil, Beer Mark, Air-conditioner Foil, Decoration Foil Machine main parameter PE Protective Film Coating Machine: 1. Whole machine controlled by PLC 2. Tension controller adopts Mitsubishi 3. Main motor adopts ABB motor . 4. The dry oven length is about 18 meters 5. Machine speed is about 180mmin 6. Coating speed is about 160mmin. 7. Coating mode depends on the coating thickness, the solid content and the viscosity . 8. Heating type :Electric heating ,Oil heating ,Steaming heating (You can choose one which is most economically ) Model C3-3 Coating width 1000mm-1800mm Material paper ,BOPP,CPP,PET,PVC, Aluminum foil Unwinding dia. φ300~1000mm ewinding dia. φ300~1000mm Oven temperature 30 ~ 220°C(According to the material) Oven length 3 ~ 48 m (According to the material) Coating speed 5~ 180 m/min (According to the material) Coating type Comma scraper coating, veins roller coating, three-rollers coating, etc.

Hot Sale 3 Ton Mining Trolley Electric Locomotive Trolley electric locomotive is a kind of rail transportation traction equipment, powered by transformers and overhead lines. Mainly used in mines where there is no risk of explosion. Because of its special power supply mode, the trolley electric locomotive has no limit on the cruising range. Therefore, it is suitable for long-term and long-distance use. There are also many options in terms of speed regulation and braking methods. Speed control methods include resistance speed control, chopping speed control and frequency conversion speed control. Braking methods include pure mechanical braking, hydraulic braking and compressed air braking. In addition, electric braking can also be selected as an auxiliary braking method. Adhesive / total weight (t) : 3 ton Track gauge (mm) : 600.762.900 Traction (KN) : 6.1 5.74 Max. Traction (KN) : 7.36 Speed(km/h) : 10.6 7.5 Power (KW) : 12KWx1 6.5KWX2 Dimensions Length(mm) : 2700 2750 Width(mm) : 940,1102 or 1240 Height(mm) : 1550 1500 Wheelbase (mm) : 816 850 Wheel diameter (mm) : 650 850 Min Curve radius (m) : 5.7 6 Controller : Resistencia or IGBT Braking method : Mechanical Detailed Photos Advantages of our product 1.Using high-quality steel plates, special rust removal process make sure it more anti-corrosion and suitable for harsh mining environment. 2. Producing motors ourselves, using high lever insulation material and pure copper, ensure the powerful traction force, and suitable for harsh mining environment. 3.Gear anastomosis surface to reach more than 80%, which is far more exceeding the standard. 4.Professionally designed and adjusted frame ensure safe driving and avoids falling off rails. 5.A variety of braking methods can be choose, air brake, hydraulic brake, electric brake, mechanical brake to ensure the safety drive. 6. 40 years richful experience with the ability to design and make customized product according to your requirements. 7. Proving factory online-visiting Factory Test Mining Locomotive test 1.Before Running the locomotive,carry out gear debugging, lighting, gear, and brake adjustment etc.To ensure the normal operation of the locomotive. 2.Carry out a tensile test before leaving the factory to ensure the load performance of the locomotive meets the standard. Our design standards generally exceed the national standard by 10%-20%. 3.Carry out different type running test before leaving the factory to ensure the performance and normal operation of the whole locomotive. It can adapt to various harsh conditions under simulated working conditions. Motor test The motor has to go through many inspection procedures before leaving the factory, and each motor has to be carried out with load running experiments. Explosion-proof motors are carried out with water pressure test. All the test of motor is to ensure that can adapt to harsh working conditions. Cases 1. A good feedback of our lithium battery locomotive from a client of Latin America 2. In order to solve the exist problems of lead-acid batteries. More than 30 lead-acid battery electric locomotives in this large mining were changed into lithium battery electric locomotives, which improved the work enthusiasm and production efficiency of employees, reduced costs,and more environment- friendly. 3. The mining rock drill car designed by Sunward Co., has a small size and simple structure, so the space for placing the lithium battery on the body is very limited. According to the limitation size, our company design a lithium power supply power plan, which perfectly solves the problem of lithium power supply space. In order to adapt to the special industrial and mining environment and improve transportation efficiency, a batch of 2.5-ton lithium battery electric locomotives are designed to Myanmar Clients. FAQ What's your product advantages? We have more 40 years experience in this field so that we could design or produce the locomotive as your requirement. We could also provide online service to teach you how to operate and maintain the locomotive. The most important thing that we produce the main part of the locomotive- The traction motors. we could guarantee the power of the locomotive. 1.Pre-sales Service: The wide product range enables us to provide our customers with individual machines or complete processing plants. Based on our customer's request and budget, our experts make efficient and reliable solutions, and we produce strictly follow customers' order. What's more, every customer has the chance to visit the working machine in the site before placing the order. 2.After-sales Service: Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the quarry site to help install the customer's plants.Necessary training about machine daily maintenance to local workers is provided also. 3.Methods of Payment: T/T (Telegraphic Transfer) or Western Union or L/C at sight Handling time for an order: Within 10 days supplied from stock 4.Shipping method: Sample order: we suggest Courier express like DHL/UPS/FEDEX or by air Bulk order: we suggest by air or by sea. 5.Quality Control: We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 6.After Services: a. Our sales team will response for your question within 24 hours (Holiday is Excluded) b. Technical Support will be available in any time c. Free replacement will provide once the failure confirmed caused by our product quality

Minimum Order: 1 bags

Category:Copper alloy casting Brass casting refers to the use of brass as a raw material and casting into castings that can be used in different fields. Common grades are C2100, C2200 and so on. An alloy generally composed of copper and zinc, known as brass, has a golden yellow appearance. Some other elements can be added to brass to produce special brass that works in different environments. Generally, the hardness and cutting performance of brass products are very good, so they can be processed into different and more refined products. Brass has a small crystallization temperature interval and has better casting properties. Compared with tin bronze, cast brass has better mechanical properties. In addition, the zinc contained in brass leads to lower cost of brass, but also because of The presence of zinc makes cast brass have poor corrosion resistance, and other elements are usually added to brass to enable brass to have some other properties to adapt to work in different environments. https://www.foundryseiko.com

Minimum Order: 100

Reinforced with 20% of glass fiber on substrate PA66 is called PA66 GF20, it improves dimensionally stabilized and impact resistance for injection moulding. Typical Application of PA66 GF 20 (A2000D) PA GF20 is applied to various precision gears due to its high rigidity, dimensional stability, noise reduction, wear resistance, quietness, lubrication and antistatic. Processing Detail of PA66 GF20 (A2000D) Other Details of  PA66 GF20 (A2000D) Physical Property Ash (20.0% 1 ISO3451/1) Conditioned 600°C*2h Density (1285Kg/m3 1 ISO1183) Conditioned 23°C Shrinkage Parallel Flow (0.5-0.9 % 1 ISO294-4) Shrinkage Vertical Flow (0.8-1.1% I ISO294-4) Mechanical Properties Tensile strength (145.0MPa 1 ISO527) Conditioned 5mm/ min Tensile Strain at Break (2.5% I ISO527) Conditioned 5mm/min Notched Impact Strength (8.5KJ/m2 I ISO179) Conditioned 1.0J Flexural Strength (235MPa 1ISO178) Conditioned 2mm/min Flexural Modulus (6876 MPa I ISO178) Conditioned 2mm/ min Thermal Property Melting Point (260°C I ISO11357) Hot Deformation Temperature (245*C I ISO75) Conditioned 1.8MPa Flammability Class (HB 1UL94) Conditioned mm Injection Molding Conditions Drying Temperature 130°C Drying Time 3h Cylinder Temperature 280-300°C Nozzle Temperature 280-300*C Tooling Temperature 80-100*C * Molding conditions are just for reference, please make an adjustment based on the actual situation！ Want to know the details of modified polyethylene or buy pa6 6 gf50, contact us.

Minimum Order: 1000

PA66 GF 15 is Nylon66 and 15% Glass-Filled, these materials are performed with medium stiffness and strength but it has much better mechanical properties over unfilled granules. Reinforced with 15% of glass fiber and modified Nylon 66 in Anmei plastic plant combined with other property enhancements such as high tensile strength, heat stabilized and flame retardant make it suitable for injection molding.  Other percentages glass-filled nylon is also available on a custom-order basis. Typical Application of pa66gf15 (A2000C) Nylon 66 GF15, mainly used in internal and external structural parts around the engine, electrical switches, and electronic connectors. Processing Detail of PA66 GF15 (A2000C) Other Details of pa6 6gf15 (A2000C) Physical Property Ash (15.0% 1 ISO3451/1) Conditioned 600°C*2h Density (1245Kg/m3 1 ISO1183) Conditioned 23°C Shrinkage Parallel Flow (0.7-1.0% 1 ISO294-4) Shrinkage Vertical Flow (1.0-1.4% I ISO294-4) Mechanical Properties Tensile strength (125.0MPa 1 ISO527) Conditioned 5mm/ min Tensile Strain at Break (2.0% I ISO527) Conditioned 5mm/min Notched Impact Strength 6.0KJ/m2 ISO179) Conditioned 1.0J Flexural Strength (188MPa 1ISO178) Conditioned 2mm/min Flexural Modulus (5350MPa I ISO178) Conditioned 2mm/ min Thermal Property Melting Point (260°C I ISO11357) Hot Deformation Temperature (240*C I ISO75) Conditioned 1.8MPa Flammability Class (HB 1UL94) Conditioned mm Injection Molding Conditions Drying Temperature 130°C Drying Time 3h Cylinder Temperature 280-300°C Nozzle Temperature 280-300*C Tooling Temperature 80-100*C * Molding conditions are just for reference, please make an adjustment based on the actual situation！ Want to know the details of modified polyolefin or more, contact us.

Minimum Order: 1000