Plastic Machinery Parts

PA66 GF 15 is Nylon66 and 15% Glass-Filled, these materials are performed with medium stiffness and strength but it has much better mechanical properties over unfilled granules. Reinforced with 15% of glass fiber and modified Nylon 66 in Anmei plastic plant combined with other property enhancements such as high tensile strength, heat stabilized and flame retardant make it suitable for injection molding.  Other percentages glass-filled nylon is also available on a custom-order basis. Typical Application of pa66gf15 (A2000C) Nylon 66 GF15, mainly used in internal and external structural parts around the engine, electrical switches, and electronic connectors. Processing Detail of PA66 GF15 (A2000C) Other Details of pa6 6gf15 (A2000C) Physical Property Ash (15.0% 1 ISO3451/1) Conditioned 600°C*2h Density (1245Kg/m3 1 ISO1183) Conditioned 23°C Shrinkage Parallel Flow (0.7-1.0% 1 ISO294-4) Shrinkage Vertical Flow (1.0-1.4% I ISO294-4) Mechanical Properties Tensile strength (125.0MPa 1 ISO527) Conditioned 5mm/ min Tensile Strain at Break (2.0% I ISO527) Conditioned 5mm/min Notched Impact Strength 6.0KJ/m2 ISO179) Conditioned 1.0J Flexural Strength (188MPa 1ISO178) Conditioned 2mm/min Flexural Modulus (5350MPa I ISO178) Conditioned 2mm/ min Thermal Property Melting Point (260°C I ISO11357) Hot Deformation Temperature (240*C I ISO75) Conditioned 1.8MPa Flammability Class (HB 1UL94) Conditioned mm Injection Molding Conditions Drying Temperature 130°C Drying Time 3h Cylinder Temperature 280-300°C Nozzle Temperature 280-300*C Tooling Temperature 80-100*C * Molding conditions are just for reference, please make an adjustment based on the actual situation！ Want to know the details of modified polyolefin or more, contact us.

Minimum Order: 1000

We are here to be your reliable partners of Color Masterbatch. Color masterbatches are widely used in polyethylene(PE), polypropylene(PP), polystyrene(PS), ABS, nylon, PC, PET and other resins to produce colorful fibers, clothing, blown films, daily plastics, cables and optical cables, household appliances, automobiles accessories, etc. The carrier of the special color masterbatch is the same as the plastic of the product, and it has good matching. After heating and melting, the pigment particles can be dispersed in the product plastic well, and it has good chemical stability. From a functional point of view, the products of color masterbatch material include antistatic masterbatch, antioxidant masterbatch, light stable masterbatch, lubricating masterbatch, open masterbatch, flame retardant masterbatch, matte masterbatch, pearlescent masterbatch, filler masterbatch, conductive masterbatch and antibacterial and anti-mildew masterbatch. Some masterbatches are comparable to European and American materials like DATE company with stable product quality and high-cost performance. As a reliable masterbatch supplier/masterbatch exporter, Anmei produces the low-shrinkage PBT masterbatch for optical fiber and cable, which is one of our special masterbatch products. Types of Masterbatch Material in Anmei We offer a wide range of white masterbatches based on carriers such as TPU, PE, PS, ABS, and more. An antimicrobial masterbatch is supplied in carriers suitable for most polymers including PVC, pe masterbatch, HDPE, pp masterbatch, PA, PET, abs masterbatch and PC. What is Antimicrobial Masterbatch? It can be used in most general plastics such as ABS, PP, PE, PC, as well as injection molding, extrusion, blow molding and other conventional plastics. For products that have high requirements for pro... The Advantage of PBT Additive Masterbatch in Anmei Low-shrinkage PBT masterbatch is one of Anmei's best-selling products mainly used for 5G fiber jackets. Anmei PBT can bring: Your satisfaction is important to us! Email us your questions about engineering plastic and masterbatch products and more. As a plastic engineering inc, Anmei provides pa6 plastic material, modified polyolefin, master batches, polypropylene masterbatch, slip masterbatch, masterbatch compound, abs and pc material and etc. For more information, please feel free to contact us!

Minimum Order: 1000

Transparent ABS, also called MABS plastic material, which has excellent transparency, impact toughness and good processing properties. The light transmittance of transparent ABS is about 88%, second only to PMMA (91%) and PC (90%). The main manufacturers of this MABS plastic material are LG Chemical, Toray and Denka. Transparent ABS Typical Application Many chemicals will corrode the rubber phase in the ABS resin, causing the transparent ABS to fog. MABS plastic material is widely used in household appliances and kitchenware, consumer goods, automotive and packaging industries. At present, transparent ABS resin is mainly used in small appliances such as TVs and air conditioners, refrigerators, washing machines, floor scrubbers, window cleaners, etc., and parts of transparent windows, double-shot molding TV front frames, and air-conditioning panels sprayed on the back are also made by transparent ABS (MABS plastic). Transparent ABS Processing Detail Here are the processing details of transparent ABS（MABS plastic material）, a kind of ABS engineering plastic. Other Details of Transparent ABS (MABS plastic) Physical Property of Transparent ABS  (MABS plastic) Ash                     (15.0% 1 ISO3451/1) Conditioned 600°C*2h Density (1250Kg/m3 1 ISO1183) Conditioned 23°C Shrinkage Parallel Flow (0.5-0.7 % 1 ISO294-4) Shrinkage Vertical Flow (0.7-1.1% I ISO294-4) Mechanical Properties of Transparent ABS  (MABS plastic) Tensile strength (125.0MPa 1 ISO527) Conditioned 5mm/ min Tensile Strain at Break (2.5% I ISO527) Conditioned 1.0J Notched Impact Strength (125 0MPa I ISO527) Conditioned 2mm/min Flexural Strength (190MPa 1ISO178) Conditioned 2mm/min Flexural Modulus (5700 MPa I ISO178) Conditioned 5mm/ min Thermal Property of Transparent ABS  (MABS plastic) Melting Point (220°C I ISO11357) Hot Deformation Temperature (175*C I ISO75) Conditioned 1.8MPa Flammability Class (HB 1UL94) Conditioned mm Injection Molding Conditions of Transparent ABS  (MABS plastic) Drying Temperature 130°C Drying Time 3h Cylinder Temperature 240-260°C Nozzle Temperature 240-260*C Tooling Temperature 80*C As a masterbatch factory, Anmei provides pa6 plastic material, modified polyolefin, master batches, pa6 gf 15 and etc. For more information, please feel free to contact us!

Minimum Order: 1 bags

Anmei company specializes in the production of TPU slip masterbatch ingredients and TPU frosted matte masterbatch excellent dispersibility in cast films. Casting film can be compounded with plastic woven cloth during production to be used as shade cloth and tourist tents. TPU anti-block masterbatch is designed to prevent blocking during the extrusion of thin TPU film and improves the bound ability of TPU film. Problem & Solution of Masterbatch Application in Cast Film Problem1: Moisture in the masterbatch or poor heat resistance of the ingredients will cause the cast film to have a network structure. Solution1: Appropriately reduce the temperature of each zone and dry the masterbatch in the cast film production process. Color masterbatch should be chosen pigments with high color strength and good heat resistance, and then strengthen the blowing, and appropriately increase the water temperature. Problem2: The low content of titanium dioxide in the film will lead to the poor hiding power of the cast film. Solution2: Increasing the amount of masterbatch Increasing the content of titanium dioxide in the masterbatch Problem3: Poor pigment dispersion leads to colored spots on the cast film. Solution3: Choosing masterbatch with good dispersibility ingredients. Problem4: The volatile matter in the masterbatch causes smoke during processing. Solution4:  Reducing the extrusion temperature Choosing high-temperature resistant masterbatch As a masterbatch company, Anmei provides pa6 plastic material, modified polyolefin, master batches, poly butylene terephthalate, pbt, pbt material, pbt masterbatch, black masterbatch and etc. For more information, please feel free to contact us!

Minimum Order: 1 bags

PC-ABS is a blend of PC and ABS.If the two materials are simply mixed and then injected directly, the effect is very poor, and delamination will occur. The advantages of PC are rigidity and toughness, but the disadvantages are stress cracking and high viscosity. The advantage of ABS is good fluidity, but low surface hardness. The blended PC-ABS material retains the advantages. PC-ABS has higher surface hardness, higher rigidity and toughness, and also higher resistance to stress cracking. The mechanical properties of PC and ABS material are somewhere in between. Typical Application of PC/ABS PC/ABS of Anmei Company has passed the SGS laboratory test, and its oil resistance can meet the requirements of 10k times of opening and closing of kitchen appliances without cracking. Processing Detail of ABS chemical resistance Other Details of PC/ABS Physical Property Ash                     (15.0% 1 ISO3451/1) Conditioned 600°C*2h Density (1250Kg/m3 1 ISO1183) Conditioned 23°C Shrinkage Parallel Flow (0.5-0.7 % 1 ISO294-4) Shrinkage Vertical Flow (0.7-1.1% I ISO294-4) Mechanical Properties Tensile strength (125.0MPa 1 ISO527) Conditioned 5mm/ min Tensile Strain at Break (2.5% I ISO527) Conditioned 1.0J Notched Impact Strength (125 0MPa I ISO527) Conditioned 2mm/min Flexural Strength (190MPa 1ISO178) Conditioned 2mm/min Flexural Modulus (5700 MPa I ISO178) Conditioned 5mm/ min Thermal Property Melting Point (220°C I ISO11357) Hot Deformation Temperature (175*C I ISO75) Conditioned 1.8MPa Flammability Class (HB 1UL94) Conditioned mm Injection Molding Conditions Drying Temperature 130°C Drying Time 3h Cylinder Temperature 240-260°C Nozzle Temperature 240-260*C Tooling Temperature ​ 80*C As a engineering plastic company, Anmei provides pa6 plastic material, modified polyolefin, master batches, pc abs gf30, pc abs v0, pc abs gf20, pc abs gf10, pc abs fr40, abs pc plastic, pc abs, pc abs material and etc. For pc abs price or more information, please feel free to contact us!

Minimum Order: 1 bags

PA 6 GF50 is a fiber reinforced plastic made of nylon 6 resin as a base material and 50% glass fiber as a reinforcing filler, and various processing aids be added. Typical Application of PA6 GF50 (A1011J) PA GF50 is used to manufacture high-strength and high wear-resistant structural parts of machinery, vehicles, electronics, sports equipment and other fields. We know that pa6 50gf composite material takes both strength and toughness into consideration, which is exactly what the suspension control arm needs. Processing Detail of PA6 GF50 (A1011J) Other Details of pa6 6 gf50(A1011J) Physical Property Ash                     (15.0% 1 ISO3451/1) Conditioned 600°C*2h Density (1250Kg/m3 1 ISO1183) Conditioned 23°C Shrinkage Parallel Flow (0.5-0.7 % 1 ISO294-4) Shrinkage Vertical Flow (0.7-1.1% I ISO294-4) Mechanical Properties Tensile strength (125.0MPa 1 ISO527) Conditioned 5mm/ min Tensile Strain at Break (2.5% I ISO527) Conditioned 1.0J Notched Impact Strength (125 0MPa I ISO527) Conditioned 2mm/min Flexural Strength (190MPa 1ISO178) Conditioned 2mm/min Flexural Modulus (5700 MPa I ISO178) Conditioned 5mm/ min Thermal Property Melting Point (220°C I ISO11357) Hot Deformation Temperature (175*C I ISO75) Conditioned 1.8MPa Flammability Class (HB 1UL94) Conditioned mm Injection Molding Conditions Drying Temperature 130°C Drying Time 3h Cylinder Temperature 240-260°C Nozzle Temperature 240-260*C Tooling Temperature 80*C As one of masterbatch producers, Anmei provides pa6 plastic material, modified polyolefin, master batches and etc. For more information, please feel free to contact us!

Minimum Order: 1 bags

The WT series of the double shaft shredder is a high-capacity machine. Each of our twin shaft shredder adopts "dual motor + double planetary reducer" to achieve an ideal shredding efficiency. It is extensive used in improving utilization rate of waste resource , such as municipal solid waste, domestic waste, industrial waste, waste tyre, resource regeneration, waste incineration pretreatment, etc. 1. The discharge port is designed without screen, which greatly improves the shredding efficiency. Each rotor is driven by independent motor and gear reducer with large torque, stable performance. 2. The hydraulic feeding device can be customized, micro PLC for auto control of start and stop, co-rotation and reversal rotation of rotors while overload. 3. Customized blade according to different application. The material includes 60Si2Mn, H13, D2, and the structure has split type and integral type for option. Single claw or multiple claw blades are optional according to different materials and requirements for high efficiency.

Minimum Order: 1 bags