Other Passive Components

Introduction of SMD inductors: Volume: 0402, 0603, 0805, 1206, 2520, 3225 4532, 5650 Sensitivity: 12NH, 15NH, 22NH, 39NH, 68NH 1R0K, 1R2K, 2R2K2R7K, 3R3K, 4R7K10uH, 15uH12uH18u22H1MH12MH 1.5MH18MH2.2MH...... Error: J=+5%K=±10%M=±20%, N=±30% Inductors used in power supply mounting and circuits are produced with metal composite materials or ferrite materials. It is mainly used for circuits that realize voltage conversion that requires a specific voltage to provide stable power for ICs. The corresponding inductor is used in the power supply circuit, and the inductance is maintained when the current is allowed, and it has the characteristics of low square resistance. High Current Slow down saturation and maintain high current characteristics Low RDC Improves high current efficiency with low branch resistance Prices may fluctuate daily, please contact me if needed!

Minimum Order: 4000

Pingshang Technology Varistor Introduction: Series: MYD, MYG, MYL, MYT1 Common size (SMD): 1210, 1206, 0805, 0603 and 0402... Common error: K=+10% Resistance: Varistors generally do not look at resistance; conventional performance is mainly three parameters: Varistor voltage V1mA: The resistance conduction voltage is generally selected according to the protected circuit; The leakage current IL generally refers to the current passing through the resistor when the applied voltage is 83% V1mA. The general requirement is 45; The resistance value is below the ohm level. If the resistance value must be tested, it must be the test resistance value under the specified voltage. The resistance value decreases sharply with the increase of the voltage, which is similar to the logarithmic relationship. Maximum AC voltage (RMS) Uac or maximum DC voltage Ud: generally Uac~064U1mA, Udc~083U1mA. Prices may fluctuate daily, please contact me if needed!

Minimum Order: 4000

Thermistor Pingshang Technology thermistor introduction: Series: PTC, NTC Common sizes (SMD): 1210, 1206, 0805, 0603 and 0402... Commonly used resistance values: 12, 52, 102, 100Q, 1K, 10K, 50K, 100K.... Common errors are: ±1%, ±2%, ±3%, ±5%, ±10%, ±20%, etc. Prices may fluctuate daily, please contact me if needed!

Minimum Order: 4000

Pingshang Technology Varistor Introduction: Series: MYD, MYG, MYL, MYT1 Common size (SMD): 1210, 1206, 0805, 0603 and 0402... Common error: K=+10% Resistance: Varistors generally do not look at resistance; conventional performance is mainly three parameters: Varistor voltage V1mA: The resistance conduction voltage is generally selected according to the protected circuit; The leakage current IL generally refers to the current passing through the resistor when the applied voltage is 83% V1mA. The general requirement is 45; its resistance value should be close to the insulator in the working state and reach the megohm level or above. The resistance value is below the ohm level. If the resistance value must be tested, it must be the test resistance value under the specified voltage. The resistance value decreases sharply with the increase of the voltage, which is similar to the logarithmic relationship. Maximum AC voltage (RMS) Uac or maximum DC voltage Ud: generally Uac~064U1mA, Udc~083U1mA. Prices may fluctuate daily, please contact me if needed

Minimum Order: 4000

Detailed description of precise patch resistance Series: 0805 Resistance: 0R-500M 0-22M complete series Power: 1/20W-1W Deviation: D=+0.5%, B=+0.1% Features of Precision Patch Resistor Products 1. The resistance error is (+) 0.5%, and the temperature coefficient is (+) 50 ppm/C. 2. Small in size and light in weight; 3. Suitable for reflow and wave soldering; 4. The electrical performance is stable and reliable. 5. Low cost of assembly and matching with automatic mounting equipment; 6. Superior mechanical strength and high frequency characteristics; 7. Compliance with ROHS directive requirements. 8. Applications include handheld products, computer products, industrial and medical instruments, etc. PAGOODA Precision Patch Resistor Product Parameters and Characteristics British (in) metric (mm) resistance voltage rating 0201 0603 0-47M 25V 1/20W 0402 1005 0-47M 50V 1/16W 0603 1608 0-47M 50V 1/16W, 1/10W 0805 2012-47M 150V 1/10W, 1/8W 1206 3216 0-47M 200V 1/8W, 1/4W 1210 32250-47M 200V 1/4W, 1/3W 1812 4832 0-47M 200V 1/W 2010 50250-47M 200V 1/W, 3/4W 2512 64320-47M 200V 1W Contact me if you want WeChat: pskj13622678159

Minimum Order: 4000

SMD high power resistor product details Volume: 2010 (5025) 2512 (6432) Size: 2010=5.0*2.5, 2512=6.4x3.2 Resistance: 0R—500M 0Ω—22MΩ full range Power: 1W, 2W, 3W Deviation: F=±1%, J=±5% Packing: 4000 Feature description: Small size and light weight; Adapt to reflow soldering and wave soldering; Stable electrical performance and high reliability; Low assembly cost and matching with automatic placement equipment; High mechanical strength and superior high frequency characteristics; The lead-free terminal electrode of the product is RoHS compliant.

Minimum Order: 4000

Product Name: Common Mode Inductor Product parameters (product overview) volume: 0402, 0603, 0805, 1206, 2520, 3225, 4532, 5650 Tolerance: I=±7%, K=±10%, L=±15%, M=±20% Sensitivity: 1.2N 1.5N 2.2N 3.9N 6.8N...... 1R0K 1R2K 2R2K 2R7K 3R3K 4R7K… 10u 15u 12u 18u 22u… 1MH 1.2MH 1.5MH 1.8MH 2.2MH… Features: 1. High dimensional precision wire wound inductor suitable for automatic placement; 2. Good solderability; 3. Heat-resistant resin encapsulation with excellent mechanical strength; 4. Excellent Q value and high reliability; 5. Used in LCD TVs, computer drives, mobile phones, car audio and other electronic products.

Minimum Order: 4000

SMD inductor parameters: Volume: 0402, 0603, 0805, 1206, 1210 Units: H, NH, UH, MH Error: ±5%, ±10% Packing: 4000PCS/disk, 3000PCS/disk above 1206 Current: the difference between small current and large current, unit A (ampere) The chip inductors in our inventory are complete in specifications: A complete range of conventional models, including: SMD magnetic beads, high current SMD inductors, SMD power inductors, high frequency inductors, SMD wire wound inductors, laminated inductors, common mode inductors, shielded inductors, I-shaped inductors, etc.; Conventional inductance, rated current and other parameters are in stock. The role of chip inductors: 1. Filtering Because it has the characteristics of passing DC and blocking AC, it can be used for power supply filtering; 2. Resonance It can form a resonance frequency selection circuit with a capacitor, and the resonance frequency is determined by the size of the chip inductance and capacitance; 3. Frequency division Can be used for frequency division of high and low frequency signals Application fields of chip inductor products: Internet of things products, smart products, Internet products, communication products, 3D printers, etc.

Minimum Order: 4000

SMD aluminum electrolytic capacitor specifications: 1. Package sizes include 0405, 0504, 0605, 0607, 0810, 1010 2. The capacity specification ranges from 0.1UF to 470UF. Conventional specifications are in stock. We specially offer customized services. We can satisfy the capacity value you want! 3. The voltage is 4V～400V 4. Errors include J±5%, K±1%, M±20% effect: Filtering, energizing, coupling, starting, etc. Mainly used in: power supply products, lighting equipment, automotive electronics, intelligent electronic products, network communication equipment automation equipment, etc. Standard RVT Series SMD Aluminum Electrolytic Capacitors Operating temperature range: -55℃～+105℃ 2000 hours rated Working voltage: 4V ~ 100V DC Capacitance range: 0.1uf～1500uf Capacitance tolerance: ±20% (120HZ. 20℃)

Minimum Order: 4000

SMD triode conventional specifications include: Package: SOT-23 model: S9012, S9013, S9014, S9015, S9018, S8050, S8550, SS8050, SS8050 MMBT3904, MMBT3906, MMBT4401, MMBT5551, MMBT5401, MMBT2222, MMBT2907, MMBT2907A, MMBTA42 MMBTA43, MMBTA44, MMBTA55, MMBTA56, MMBTA64, MMBTA92, MMBTA93, MMBTA94, etc. The above are the more conventional models. If you need other models, please contact Pingshang Technology Our chip triode products are mainly used in: 1. Power Products 2. Lighting equipment 3. Automotive Electronics 4. Medical Equipment 5. Intelligent products 6. Network communication equipment 7. Instrumentation The role of the chip triode includes: 1. Commonly used for voltage amplification and current amplification; 2. Dominate the oscillator circuit 3. Use as an electronic switch 4. Play the role of impedance change 5. Use as a variable resistor In the production of electronic finished products, the chip triode of electronic components is also a small common component. There are the following seven categories for commonly used ones. If necessary, please contact me: WeChat: pskj13622678159

Minimum Order: 4000

SMD tantalum capacitor error: K=±10% M=±20% SMD tantalum capacitor voltage: 6.3V ~ 50V Series: T510, 293D, T494, T495, TAJ, TPS, 593D, TCFG… SMD tantalum capacitor capacity: 0.1μF ~ 1000μF SMD tantalum capacitor volume: Type A (3.2×1.6) Type B (3.5×2.8) Type C (6.0×2.5) Type D (7.3×4.3) Type E (7.8×4.5) SMD tantalum capacitor tape: A, B 2000pcs per plate C, D, E 500pcs per plate E2, V 400pcs per plate SMD tantalum capacitor features: 1. Ultra-miniaturized products; 2. With three-layer electrode structure; 3. High reliability and wide temperature range; 4. Suitable for automatic placement machine installation.

Minimum Order: 4000

Model: SS32 SS310 SS34 SS38 SS34 Voltage: 100V 20V 40V 60V 80V Current: 0.5 Package: SOT-23 SOT-124 DO-214AA Schottky diode features: 1. Hard breakdown characteristics 2. Low pressure difference. High speed 3. Good high temperature characteristics 4. Low loss and high efficiency

Minimum Order: 4000

The main parameters of our SMD magnetic beads are: Unit: R, KR Error: ±25%, ±40% Packing: 4000PCS/disk Current: the difference between small current and large current, unit A (ampere) Volume: 0805 1206 0402 0201 0603 1210 1808 1812 1825 2220 2225 Features: 1. Internal silver printing layer and magnetic shielding structure to minimize crosstalk; 2. It can suppress electromagnetic interference in a wide frequency range (from tens to hundreds of MHz); 3. Three types of materials and a wide range of impedance values for various applications; 4. High solderability and thermal sensitivity, high reliability, and wide filter frequency; 5. Computers and other electrical equipment and peripheral equipment for noise suppression of low-rate signals, video cameras, LCD TVs Video, communication equipment, office equipment, etc. A complete range of conventional models, including: SMD magnetic beads, SMD low frequency magnetic beads, SMD high frequency magnetic beads, SMD ordinary current magnetic beads, SMD high current magnetic beads, etc.; conventional parameter products are in stock.

Minimum Order: 4000

SMD LED size: 0402, 0603, 0805, 1206 colour: Red, Yellow, Blue, Green (Plain Green and Emerald), White, Bicolor (Two Colors) Voltage: 1.6V~2.1V Current: 5~20mA Features: The working voltage is very low and the working current is very small; Good shock and vibration resistance, high reliability and long life; Suitable for reflow soldering and wave soldering; Comply with the requirements of ROHS directive. Welcome to contact us whatsapp: 13622678159 WeChat: pskj13622678159

Minimum Order: 4000