Petrochemical Products - Others

The application of wax micronized powder in road marking is mainly used as a functional additive to improve the performance of marking coatings. The following are its specific uses and advantages: 1. Anti-fouling and anti-adhesion Anti-adhesion: wax micropowder (such as polyethylene wax, Fischer-Tropsch wax, etc.) added to hot melt road marking coatings can form a fine wax layer on the surface of the coatings, reduce the adhesion of dust and oil, and reduce the wear and tear of vehicle tires on the markings. Anti-pollution: especially in rainy and snowy weather, the hydrophobicity of wax can delay the penetration of pollutants and keep the reflectivity of the marking line. 2. Abrasion resistance and durability Wax micropowder can enhance the hardness and abrasion resistance of the paint, reduce the wear and tear caused by long-term vehicle crushing, and extend the life of the marking line. Synergize with resin, glass beads and other ingredients to enhance mechanical strength. 3. Optimization of construction performance Fluidity and dispersion: Wax micropowder can improve the fluidity of the paint in the high temperature molten state, making the construction smoother and the marking line more level. Anti-settling: Prevent fillers (such as titanium dioxide, glass beads) in the paint from settling when stored, and maintain uniformity. 4. Reflective performance aid The wax layer on the surface can protect the reflective glass beads from falling off easily and maintain the reflective effect at night. 5. Environmental protection and cost Part of the wax micropowder (such as vegetable-based wax) can replace petroleum-derived components, reducing the burden on the environment. Reduce the cost of frequent maintenance of marking.

Water-soluble micronized waxes are mainly used to enhance the scratch resistance, abrasion resistance and surface smoothness of paints, printing inks and other materials, and at the same time have the characteristics of uniform dispersion, non-toxicity and environmental protection. Specific function Enhance scratch resistance and abrasion resistance Water-soluble micronized wax can significantly enhance the hardness and abrasion resistance of the surface of the paint film or ink, reduce the coefficient of friction, and avoid scratches and sticking. For example, it can be added to automobile paint and furniture paint to enhance the durability of the coating. Improve surface smoothness Its regular particle form can reduce friction resistance and give a smoother surface effect to the touch, suitable for surface treatment of plastic, metal and other materials. Enhance dispersion and stability Micronized wax is easy to disperse in water-based system, which can evenly mix pigments and fillers, prevent settling, and enhance the fluidity and stability of coatings or inks. Environmental friendliness and applicability Non-toxic, odourless and solvent-resistant, it is suitable for water-based coatings, inks and adhesives, especially for industrial scenarios with high environmental requirements.

USP - appointment to visit the facilities tank farm/ FOB tank to tank Dear ladies, dear gentlemen, We continue to add new facilities to our offering list. Please see below the latest one, a face to face table top meeting between the facility and the buyer's reps. Any serious buyer can schedule an appointment to visit the facilities tank farm to see and test the product for themselves. The facility will give physical Proof of Product on the ground. FOB TTT: 1. The buyer provides an ICPO along with their Company Registration Certificate or any valid ID and the TSA or CPA for verification and registration by the seller. 2. The seller issues a draft Commercial Invoice (CI), which the buyer signs and returns. Following this, the seller will issue an appointment letter for the TTM, to be signed by both the buyer and their logistics company, confirming their readiness to facilitate the TTM at the buyer's logistics terminal. 3. Upon confirmation of the TTM by the buyer's logistics company, the meeting takes place at the scheduled time and date, with the agenda including: a. Verification of identification proofs for all attendees. b. Buyer presenting Proof of Funds (POF). c. Seller presenting hard copies of POP and SGS documents for review, no later than 48 hours before inspection. d. Seller inspecting the buyer's designated tank/vessel to ensure readiness for seamless injection operations. 4. After the successful meeting and initial inspection, the buyer may conduct a dip test in the seller's tank at the buyer's expense. 5. The buyer completes the payment for the confirmed products as outlined in the CI. 6. The seller proceeds to inject the product into the buyer's tank and transfers ownership of the product as instructed by the buyer. The buyer then lifts the product. 7. The seller disburses payments to all intermediaries involved in the transaction. Monthly contract shipments continue as per the terms and conditions of the sales and purchase agreement between the buyer and the seller. We would like to reiterate that we will not be assigning any additional human resources to answer questions to the board in advance. Each applicant must first qualify by submitting their current application documents. Once these have been submitted, each applicant will be contacted directly by the facility within a maximum of 48 hours. It is not possible to optimize the application documents at a later date. Each applicant will only be given one chance, as we are inundated with qualified application documents almost every week.  The applicant must include the relevant text elements of this facility in their application documents so that the facility can see that the applicant has accepted the structure. We look forward to meeting your requirements and remain

1. Excellent burning performance Smoke-free and odourless: almost no black smoke and odour when burning, suitable for indoor use. Stable flame: the wax is pure and burns evenly, not easy to drip or collapse. Long burning time: high calorific value, more resistant to burning than ordinary paraffin wax. 2. Strong compatibility Easy to mix colour and aroma: good fusion with dyes and flavours, bright colour and long lasting aroma (5-8% of flavour is recommended). It can be mixed with other waxes: it can be compounded with soya wax, beeswax, coconut wax, etc. to adjust the hardness or reduce the cost. 3. Exquisite appearance Fine texture: smooth surface after cooling, no crystalline particles, suitable for high-end candle craft. Transparency is optional: some Fischer-Tropsch waxes are translucent, which can be used to make ice candles and other special effects. 4. High stability Strong oxidation resistance: it is not easy to yellow or produce rancid flavour after long-term storage. Good moisture resistance: low water absorption, not easy to deteriorate under humid environment.

Fischer-Tropsch waxes are used in candle manufacturing to improve product performance and reduce costs. Its properties include high purity, low viscosity, moderate melting point and good melting properties to optimise the burning characteristics and appearance of candles. Optimisation of combustion properties: Fischer-Tropsch wax burns with a stable flame and emits less black smoke, which effectively reduces pollution during the combustion process. Its high carbon content prolongs the burning time, making it suitable for religious ceremonies or emergency lighting scenarios. In addition, the stable molecular structure reduces the shrinkage rate when the candle cools down, reducing the problem of surface depression or unevenness. Enhancement of appearance: Fischer-Tropsch Oxide can make the surface of candles smoother, the colour more evenly dispersed, and present a brighter visual effect when burning, especially suitable for decorative candles. Cost reduction: Compared with natural wax, Fischer-Tropsch wax is cheaper and less expensive to add, which reduces raw material costs and improves production efficiency.

Industrial microcrystalline waxes are widely used in the following areas due to their lubricating, stabilising and film-forming properties: Lubrication & Coating Used as a lubricant in metal working and machine building to reduce friction of parts and protect surfaces. In the field of industrial lubrication, microcrystalline wax can reduce the friction loss of mechanical parts. Inks and Coatings As ink additives to improve water resistance, abrasion resistance and gloss; in coatings to control drying time and enhance adhesion. Rubber & Plastic Processing As a softener to improve processing performance, flexibility and ageing resistance. Electronics Industry Used as a sealant for electronic components to prevent moisture erosion; also used as an insulating material to protect electronic equipment. Food Packaging Microcrystalline wax coatings are used as moisture, water and oil repellents to maintain food freshness. Textile and Leather Improve the softness and waterproof performance of fabrics and leather, and form a protective layer to enhance water resistance and sunlight resistance.

Polyphenylene ether resins (PPO) are widely used in the manufacture of copper-clad laminates (CCL) and printed circuit boards (PCB), mainly due to their excellent insulating properties, heat resistance and mechanical strength. PPO resins not only improve the dielectric and mechanical properties of CCLs, but also enhance their dimensional stability and low water absorption. Application of Polyphenylene Ether Resin in Copper Clad Laminate and Its Advantages The application of polyphenylene ether resin in copper-clad laminates is mainly reflected in its excellent performance: Insulation performance: Polyphenylene ether resin has low dielectric constant and dielectric loss, which can effectively reduce the interference and loss in signal transmission. Mechanical properties: the modified PPE resin can significantly improve the mechanical strength and dimensional stability of copper-clad laminates, ensuring stable performance in high-frequency applications. Thermal performance: Polyphenylene ether resins can maintain stable performance at high temperatures, which is suitable for high-frequency copper-clad laminates.

OPE (Oxidized Polyethylene) Wax is a versatile additive used in various industries. It acts as a lubricant, dispersant, and release agent, especially in plastic processing. OPE wax is commonly used in PVC, hot melt adhesives, paints, coatings, and textiles.  Plastic Processing:OPE wax is a popular lubricant in PVC products, helping to improve production efficiency and reduce costs. It's also used in PE, PVC cable materials, and PVC pipes.  Adhesives:OPE wax can enhance the bond strength and moisture resistance of hot melt adhesives.  Paints and Coatings:It can be used as a dispersant in water-based paints, improving gloss, smoothness, and scratch resistance.  Textiles:OPE wax can be used as a softener and anti-puncturing agent for textiles.  Other Applications:It's also used in car wax, leather auxiliaries, and as an internal dispersant in color processing.  Benefits:OPE wax can improve toughness, surface smoothness, and pass rates in plastic products. It also reduces power consumption during resin mixing and minimizes adhesion between resin and mold.  Key Properties:OPE wax has low viscosity, a high softening point, good thermal stability, and excellent external lubricity. 

OPE (Oxidized Polyethylene) Wax is a versatile additive used in various industries. It acts as a lubricant, dispersant, and release agent, especially in plastic processing. OPE wax is commonly used in PVC, hot melt adhesives, paints, coatings, and textiles.  Plastic Processing:OPE wax is a popular lubricant in PVC products, helping to improve production efficiency and reduce costs. It's also used in PE, PVC cable materials, and PVC pipes.  Adhesives:OPE wax can enhance the bond strength and moisture resistance of hot melt adhesives.  Paints and Coatings:It can be used as a dispersant in water-based paints, improving gloss, smoothness, and scratch resistance.  Textiles:OPE wax can be used as a softener and anti-puncturing agent for textiles.  Other Applications:It's also used in car wax, leather auxiliaries, and as an internal dispersant in color processing.  Benefits:OPE wax can improve toughness, surface smoothness, and pass rates in plastic products. It also reduces power consumption during resin mixing and minimizes adhesion between resin and mold.  Key Properties:OPE wax has low viscosity, a high softening point, good thermal stability, and excellent external lubricity. 

OPE (Oxidized Polyethylene) Wax is a versatile additive used in various industries. It acts as a lubricant, dispersant, and release agent, especially in plastic processing. OPE wax is commonly used in PVC, hot melt adhesives, paints, coatings, and textiles.  Plastic Processing:OPE wax is a popular lubricant in PVC products, helping to improve production efficiency and reduce costs. It's also used in PE, PVC cable materials, and PVC pipes.  Adhesives:OPE wax can enhance the bond strength and moisture resistance of hot melt adhesives.  Paints and Coatings:It can be used as a dispersant in water-based paints, improving gloss, smoothness, and scratch resistance.  Textiles:OPE wax can be used as a softener and anti-puncturing agent for textiles.  Other Applications:It's also used in car wax, leather auxiliaries, and as an internal dispersant in color processing.  Benefits:OPE wax can improve toughness, surface smoothness, and pass rates in plastic products. It also reduces power consumption during resin mixing and minimizes adhesion between resin and mold.  Key Properties:OPE wax has low viscosity, a high softening point, good thermal stability, and excellent external lubricity. 

OPE (Oxidized Polyethylene) Wax is a versatile additive used in various industries. It acts as a lubricant, dispersant, and release agent, especially in plastic processing. OPE wax is commonly used in PVC, hot melt adhesives, paints, coatings, and textiles.  Plastic Processing:OPE wax is a popular lubricant in PVC products, helping to improve production efficiency and reduce costs. It's also used in PE, PVC cable materials, and PVC pipes.  Adhesives:OPE wax can enhance the bond strength and moisture resistance of hot melt adhesives.  Paints and Coatings:It can be used as a dispersant in water-based paints, improving gloss, smoothness, and scratch resistance.  Textiles:OPE wax can be used as a softener and anti-puncturing agent for textiles.  Other Applications:It's also used in car wax, leather auxiliaries, and as an internal dispersant in color processing.  Benefits:OPE wax can improve toughness, surface smoothness, and pass rates in plastic products. It also reduces power consumption during resin mixing and minimizes adhesion between resin and mold.  Key Properties:OPE wax has low viscosity, a high softening point, good thermal stability, and excellent external lubricity. 

Fischer Tropsch wax is mainly composed of linear and saturated high carbon alkanes with relative molecular weight of 500-1000, which gives this chemical fine crystal structure, high melting point, narrow melting point range, low oil content, low penetration, low mobility, low melting viscosity, hardness, wear resistance and high stability.  Usages:These products are widely used in textiles,plastics industry,Ink and coating,adhesive. 

OPE (Oxidized Polyethylene) Wax is a versatile additive used in various industries. It acts as a lubricant, dispersant, and release agent, especially in plastic processing. OPE wax is commonly used in PVC, hot melt adhesives, paints, coatings, and textiles.  Plastic Processing:OPE wax is a popular lubricant in PVC products, helping to improve production efficiency and reduce costs. It's also used in PE, PVC cable materials, and PVC pipes.  Adhesives:OPE wax can enhance the bond strength and moisture resistance of hot melt adhesives.  Paints and Coatings:It can be used as a dispersant in water-based paints, improving gloss, smoothness, and scratch resistance.  Textiles:OPE wax can be used as a softener and anti-puncturing agent for textiles.  Other Applications:It's also used in car wax, leather auxiliaries, and as an internal dispersant in color processing.  Benefits:OPE wax can improve toughness, surface smoothness, and pass rates in plastic products. It also reduces power consumption during resin mixing and minimizes adhesion between resin and mold.  Key Properties:OPE wax has low viscosity, a high softening point, good thermal stability, and excellent external lubricity. 

OPE (Oxidized Polyethylene) Wax is a versatile additive used in various industries. It acts as a lubricant, dispersant, and release agent, especially in plastic processing. OPE wax is commonly used in PVC, hot melt adhesives, paints, coatings, and textiles.  Plastic Processing:OPE wax is a popular lubricant in PVC products, helping to improve production efficiency and reduce costs. It's also used in PE, PVC cable materials, and PVC pipes.  Adhesives:OPE wax can enhance the bond strength and moisture resistance of hot melt adhesives.  Paints and Coatings:It can be used as a dispersant in water-based paints, improving gloss, smoothness, and scratch resistance.  Textiles:OPE wax can be used as a softener and anti-puncturing agent for textiles.  Other Applications:It's also used in car wax, leather auxiliaries, and as an internal dispersant in color processing.  Benefits:OPE wax can improve toughness, surface smoothness, and pass rates in plastic products. It also reduces power consumption during resin mixing and minimizes adhesion between resin and mold.  Key Properties:OPE wax has low viscosity, a high softening point, good thermal stability, and excellent external lubricity.