Petrochemicals

Microcrystalline Wax is a refined synthetic wax derived from the heavy distillates of petroleum fractionation. Compared to common paraffin wax, it has a finer and denser crystal structure (hence the name "microcrystalline"), which gives it a unique set of physical properties: High flexibility and ductility High melting point (with a broad range, typically between 60–95°C) Strong adhesion Increased hardness while preventing brittleness Better opacity (enhances wax opacity) Improved oil-binding capacity, reducing the seeping of essential oils/fragrances Role of Microcrystalline Wax in Container Candle Making: Increases hardness and enhances structure Improves surface smoothness and prevents frosting Enhances thermal properties (melting and softening points) Boosts fragrance throw Improves adhesion and prevents shrinkage

Microcrystalline wax is mainly used in the electronics industry for the following purposes: Electronic insulation materials Microcrystalline wax has excellent insulation properties and is often used as a packaging material and coating agent for electronic devices, which can protect electronic components from moisture and dust erosion. ‌ Electronic component sealing Its heat resistance and stability make it a sealing material for electronic components, such as batteries, capacitors, and other devices. ‌ Electronic product casing and packaging Microcrystalline wax is commonly used in the manufacture of electronic product casings such as phone cases and headphone covers, as well as packaging materials such as food packaging paper boxes and paper containers. It has waterproof, moisture-proof, and oil resistant properties. ‌ Precision component lubrication In the manufacturing of precision bearings, medical devices, and other components, microcrystalline wax as a lubricant can reduce friction and improve equipment operating efficiency. ‌

Microcrystalline wax is primarily used for non-damaging metal surface polishing. Its core advantage lies in its ability to penetrate the micro- textures of metal surfaces with its fine particles for polishing, while also providing filling, cleaning, and rust-preventing functions. ‌ Polishing Characteristics Microcrystalline wax particles are typically micron-sized, capable of filling in microscopic grooves on metal surfaces to enhance gloss and smoothness. Its non-damaging properties prevent the scratches or deformation issues caused by traditional polishing methods, making it particularly suitable for precision metal products (such as automotive components and jewellery). ‌ Applications ‌Automotive industry: Repairing body scratches and maintaining body gloss. ‌ ‌Home appliances: Polishing stainless steel kitchenware and bathroom fixtures. ‌ ‌Jewellery: Enhancing the gloss of gold and silver jewellery. ‌ ‌Industrial applications: Surface treatment of mechanical parts. ‌

The application of microcrystalline wax in the casting industry is primarily reflected in the following areas: Casting release agent Microcrystalline wax, due to its excellent release properties, is commonly used as a release agent in the casting of materials such as rubber and plastic. For example, during the molding process of rubber products, adding microcrystalline wax reduces mold adhesion, facilitating demolding. ‌ Casting model components Microcrystalline wax improves the water permeability and moisture permeability of paraffin wax and enhances its resistance to bending, making it a common wax component in casting models. For example, in the preparation of mechanical models such as ship hull models, microcrystalline wax can enhance the model's toughness and waterproof performance. ‌ Casting process additives In precision casting processes, microcrystalline wax can be used as a process additive to improve the surface quality of castings, prevent cracking, and enhance demolding efficiency.

Micronized wax is an important additive in plastics processing, mainly used to improve the surface properties, processing fluidity and mechanical properties of plastics. (1) Lubrication Internal lubrication: reduce the viscosity of the melt, improve the processing fluidity, reduce energy consumption (e.g. injection moulding, extrusion). External lubrication: prevent the melt from adhering to the mould, reduce precipitation and scaling, and improve mould release. (2) Surface modification Improvement of gloss: make the surface of products smoother and brighter (e.g. PVC film, sheet). Anti-scratch: added to engineering plastics (e.g. ABS, PC) to reduce surface scratches. (3) Dispersing additives Help pigments and fillers to disperse evenly (e.g. colour masterbatch, functional masterbatch). (4) Anti-adhesion Prevent film and sheet from sticking between layers (e.g. PE cling film, BOPP film). (5) Abrasion resistance Improve the abrasion resistance of engineering plastics (e.g. nylon, POM).

In modern agriculture, the demand for efficient and sustainable livestock production is growing rapidly. To meet this demand, the Animal Feed Processing Plant has become an essential component in the livestock and poultry farming industry. From boosting feed efficiency to ensuring consistent feed quality, these plants provide a reliable solution for producing high-quality animal feed at scale. What Is an Animal Feed Processing Plant? An animal feed processing plant is a facility that turns raw agricultural ingredients—such as corn, soybeans, wheat bran, alfalfa, and rice husks—into formulated feed pellets for animals. These plants are designed to ensure nutritional balance, improve digestion, and reduce feed waste. They typically include several stages: raw material crushing, mixing, pelletizing, cooling, screening, and packaging. Depending on the setup, feed plants can be used to produce feed for a wide range of animals such as chickens, pigs, cows, sheep, rabbits, fish, and more. Whether you run a small family farm or a commercial feed business, a customized animal feed plant can significantly improve your feed production efficiency. Key Components of an Animal Feed Processing Plant 1、Raw Material Crusher This machine crushes raw materials like corn, wheat, and soybean into fine powder, making them suitable for mixing and pelletizing. 2、Feed Mixer A horizontal or vertical mixer blends various ingredients to achieve a balanced nutritional profile for animals. 3、Feed Pellet Machine This is the heart of the processing line. It compresses mixed materials into uniform pellets that are easy to store, transport, and digest. 4、Cooling System After pelletizing, feed is hot and moist. The cooling machine brings it to room temperature, enhancing pellet hardness and shelf life. 5、Screening and Packaging Broken or oversized pellets are filtered out, and finished products are weighed, packed, and sealed for storage or sale. https://richipelletizer.com/animal-feed-proces , sing-plant/ Benefits of Using an Animal Feed Processing Plant 1、Improved Feed Quality The plant ensures that feed pellets are uniform in size, composition, and nutritional value, leading to better animal health and faster growth rates. 2、Higher Production Efficiency Automated systems reduce labor costs and time, allowing you to produce large volumes of feed with minimal human input. 3、Cost Savings Processing feed on-site using local raw materials can significantly reduce reliance on expensive commercial feeds. 4、Custom Formulations You can formulate feed specific to the needs of your livestock, adjusting the ingredients for different growth stages or production goals. 5、Cleaner and Easier Storage Pelletized feed produces less dust, is easier to store, and minimizes contamination. Application Areas Animal feed processing plants are used in various sectors: 1、Poultry Farms: For chicken, duck, and goose feed production 2、Pig Farms: High-protein and high-energy feed for different growth stages 3、Cattle and Sheep Farms: Ruminant-specific formulations with high fiber content 4、Aquaculture: Floating and sinking feed pellets for fish and shrimp 5、Pet Food Plants: Formulated diets for dogs, cats, and small animals https://richipelletizer.com/

As a raw material for candle manufacturing, Fischer-Tropsch wax offers the following significant advantages, which can enhance candle performance and manufacturing efficiency: 1. High melting point and thermal stability Wide melting point range (60–120°C): Fischer-Tropsch wax with different melting points can be selected according to requirements, suitable for making candles used in high-temperature environments (such as outdoor candles), reducing the risk of deformation or melting. High-temperature stability: It is not easy to drip during combustion, reducing the risk of fire, especially suitable for pillar candles with containerless design. 2. Excellent combustion performance Smokeless and odorless: The fully hydrogenated hydrocarbon structure ensures clean combustion, suitable for environments sensitive to odors (such as aromatic candle substrates). Long burning time: The high carbon number molecular structure (C20–C60) makes the burning rate 10–20% slower than that of paraffin wax, prolonging the service life.High brightness: The flame is bright during combustion, with luminous flux superior to soy wax and close to traditional paraffin wax. 3. Material compatibility and processing advantages Low viscosity (molten state): Easy to mix with dyes and fragrances, with dispersion uniformity 30% higher than paraffin wax, avoiding color difference or uneven aroma. Low shrinkage rate (<5%): Not easy to crack during demolding, resulting in smooth finished product surface and reduced subsequent polishing costs. High hardness (penetration <1 mm): Supports complex mold shapes (such as embossed candles) and resists scratches during transportation.

Micronized wax is a key additive in printing inks, primarily used to enhance surface properties, improve rub resistance, and modify slip & abrasion resistance. Here’s a detailed breakdown of its role, types, and benefits in printing ink formulations: 1. Functions in Printing Inks: Abrasion & Scratch Resistance: Forms a protective layer on the ink surface, reducing wear during handling. Slip Improvement: Reduces friction, preventing blocking (sticking) of printed surfaces. Matting Effect: Can adjust gloss levels (depending on particle size). Rub Resistance: Prevents ink from smudging during post-printing processes. Water & Chemical Resistance: Enhances durability in wet or harsh environments. 2. Common Types of Micronized Waxes for Inks: Polyethylene (PE) Wax: Most widely used; offers excellent rub resistance and slip. Polypropylene (PP) Wax: Higher hardness, used for tougher abrasion resistance. PTFE-modified Waxes: Adds exceptional lubricity (e.g., for high-speed printing). Carnauba Wax (Natural): Used for high-gloss inks and food-contact applications. Fischer-Tropsch Wax: Synthetic alternative to carnauba with consistent quality. Paraffin & Microcrystalline Waxes: Lower-cost options for specific applications.

Polypropylene wax (PP wax) is widely used in powder coatings to enhance surface properties, processing flowability, and mechanical performance. 1. Key Functions Lubricant & Leveling Agent: Reduces melt viscosity, improves flow during curing, and minimizes defects (e.g., orange peel, craters) for a smoother surface. Lowers friction between screws and materials during extrusion, boosting production efficiency. Anti-Scratch & Abrasion Resistance: Migrates to the coating surface, forming a protective layer to enhance scratch resistance—ideal for demanding applications (e.g., automotive parts, furniture). Anti-Blocking Agent: Prevents coating layers from sticking during stacking or transport, especially in high-temperature environments (e.g., tropical climates, dense packaging). Matting Effect (synergistic with matting agents): Adjusts surface light reflection via microcrystalline structures to achieve semi-gloss or matte finishes (e.g., matte powder coatings). Dispersant & Hydrophobic Agent: Promotes uniform dispersion of pigments/fillers, reducing agglomeration. Hydrophobicity improves water resistance and anti-stain properties.

The application of micronized waxes in can coatings is mainly used as an additive to improve the surface properties, processability and durability of the coating. The following are its specific roles: 1. Main functions Lubrication and abrasion resistance: micronized wax added to the coating can reduce the coefficient of friction, enhance the abrasion resistance of the can body in the process of high-speed stamping and molding, and prevent the coating from breaking. Anti-adhesion: prevent the coating surface from sticking when the tanks are stacked or transported, especially under high temperature and high humidity environment. Surface smoothness: Improve coating leveling, reduce surface defects (e.g. orange peel, pinholes), enhance printing or appearance quality. Chemical resistance: Some waxes (e.g. PTFE wax) enhance the coating's resistance to contents (acidic beverages, alcohol, etc.). 2. Advantages and challenges Advantages: low cost, low dosage but significant effect. Enhance production efficiency (reduce equipment wear and tear, lower scrap rate). Challenges: Particle size and dispersion need to be strictly controlled to avoid affecting coating adhesion or appearance. Food safety approvals (e.g. migration tests) are required. 3. Common Wax Types Polyethylene wax: cost-effective and versatile. PTFE waxes: temperature resistant, chemically inert, suitable for high performance requirements. Amide waxes: enhanced slip, but compatibility with resins is important.

We supply microcrystalline wax from China,Korea,Thailand and so on. Advantages: 1)High melting point and thermal stability for high-temperature applications. 2)Excellent water resistance for protection. 3)Chemically inert for safety and stability. 4)Highly blendable for versatile formulations. Applications: 1)Used in lipsticks, creams, and lotions for thickening and moisturizing. 2)Used in rust prevention, cable insulation, and precision instrument lubrication. 3)Enhances candle hardness, burn time, and gloss. 4)Used in polishes to protect surfaces and enhance shine.

The application of micronized waxes in wood coatings is mainly used to enhance the smoothness, scratch resistance and feel of the coatings, as well as to provide a matting effect. The following are specific application scenarios: Application Scenarios Enhancement of smoothness and scratch resistance: Micronized wax can improve the leveling of wood coatings, reduce surface imperfections, and enhance abrasion resistance and scratch resistance. Optimization of feel: Some micronized waxes (e.g. polypropylene waxes) provide a soft touch and, in combination with silica matting powders, a matte effect can be achieved. Matting effect: The particle size and distribution of the micronized waxes influence the matting effect of the coating film and are suitable for wood finishes that require a matt appearance.

The application of wax micronized powder in road marking is mainly used as a functional additive to improve the performance of marking coatings. The following are its specific uses and advantages: 1. Anti-fouling and anti-adhesion Anti-adhesion: wax micropowder (such as polyethylene wax, Fischer-Tropsch wax, etc.) added to hot melt road marking coatings can form a fine wax layer on the surface of the coatings, reduce the adhesion of dust and oil, and reduce the wear and tear of vehicle tires on the markings. Anti-pollution: especially in rainy and snowy weather, the hydrophobicity of wax can delay the penetration of pollutants and keep the reflectivity of the marking line. 2. Abrasion resistance and durability Wax micropowder can enhance the hardness and abrasion resistance of the paint, reduce the wear and tear caused by long-term vehicle crushing, and extend the life of the marking line. Synergize with resin, glass beads and other ingredients to enhance mechanical strength. 3. Optimization of construction performance Fluidity and dispersion: Wax micropowder can improve the fluidity of the paint in the high temperature molten state, making the construction smoother and the marking line more level. Anti-settling: Prevent fillers (such as titanium dioxide, glass beads) in the paint from settling when stored, and maintain uniformity. 4. Reflective performance aid The wax layer on the surface can protect the reflective glass beads from falling off easily and maintain the reflective effect at night. 5. Environmental protection and cost Part of the wax micropowder (such as vegetable-based wax) can replace petroleum-derived components, reducing the burden on the environment. Reduce the cost of frequent maintenance of marking.

Water-soluble micronized waxes are mainly used to enhance the scratch resistance, abrasion resistance and surface smoothness of paints, printing inks and other materials, and at the same time have the characteristics of uniform dispersion, non-toxicity and environmental protection. Specific function Enhance scratch resistance and abrasion resistance Water-soluble micronized wax can significantly enhance the hardness and abrasion resistance of the surface of the paint film or ink, reduce the coefficient of friction, and avoid scratches and sticking. For example, it can be added to automobile paint and furniture paint to enhance the durability of the coating. Improve surface smoothness Its regular particle form can reduce friction resistance and give a smoother surface effect to the touch, suitable for surface treatment of plastic, metal and other materials. Enhance dispersion and stability Micronized wax is easy to disperse in water-based system, which can evenly mix pigments and fillers, prevent settling, and enhance the fluidity and stability of coatings or inks. Environmental friendliness and applicability Non-toxic, odourless and solvent-resistant, it is suitable for water-based coatings, inks and adhesives, especially for industrial scenarios with high environmental requirements.