Plastic Additives

Usage: Calcium Dodecyl Benezen Sulfonate can compound with many kinds of non- ionic surface active agents to make mixed agricultural emulsifier. It can be used to formulate pesticide, fungicide and herbicide. Caclium dodecyl benzene sulfonate is used as surfactants or agrochemical emulsifiers. It’s widely used to formulate pesticide emulsifier for organic phosphorus and organochlorine products.Calcium Pheny Sulphonate 70 % Type of Calcium Dodecyl Benzene Sulfonate: Handan Xindiya Chemicals Co. Ltd specializes in manufacturing of pesticide emulsifiers for more than two decades, with the strength of anionic surfactant, calcium dodecyl benzene sulfonate, with good quality and competitive price. As a large market sharer and Reach Authentification holder, we have the presence in more than twenty provinces locally, and our products are widely exported to USA, Spain, Switzerland, Italy, Belgium, Australia, Japan, South Korea, Malaysia, Vietnam, Thailand, Pakistan etc. Customers include some of the big names like BASF, CLARIANT, BRENNTAG etc We have manufacturing plants annual capacity 5000tons for CDBS(hydrous/anhydrous calcium salts); 5000tons capacity for nonionicsurfactant;10000tons capacity for Polycarboxylicacid cement water- reducer. Anionic Surfactant, Calcium Dodecyl Benzene Sulfonate CAS No.26264-06-2, Calcium Pheny Sulphonate 70 %, calcium salt, Ca LAB Sulfonate, oilfield auxiliary chemical, Phosphate Esters, Nonionic Surfactant, Organic Phosphorus Emulsifier, Castor Oil Ethoxylates, Fatty Alcohol Polyglycol Ethers, Polyethylene Fatty Alcohol Ethers, Pesticide Inert Ingredients, Polycarboxylate, Polycarboxylate Superplasticizer, Polycarboxylate Superplasticizer For Cement.

Chemical Name: Polydimethylsiloxane Synonyms: Polydimethylsiloxane, trimethylsiloxy-terminated  CAS NO.: 63148-62-9 EINECS NO.: 203-492-7 Molecular weight: 162.38 Typical Technical Data  The values below are not intended for use in preparing specifications. Please confirm with us prior to writing specifications on this product. Appearance: Colorless transparent liquid Specific Gravity (ρ20°C,g/cm3): 0.960~ 0.975 viscosity index (25°C,mpa.s): 2000±160 Flash point (℃）≥300 Applications Because of its special, excellent physical and chemical properties, Silane OSi DimeOSilM2000 can be used in many different industries, including: FOAM PREVENTATIVE: Extremely small amounts of fluid effectively control foam in many processing operations, especially in non-aqueous systems. Used as defoamers, lubricants, and other weather-resistant paint in the pharmaceutical, food, chemical, paint, and building materials industries. LUBRICANT: The fluid provides excellent lubrication for most plastic and elastomeric surfaces. Lubricity with metals depends upon the combination involved. Care should be taken to select suitable metals for pumps and other items with moving parts.

Chemical Name: 3-ureidopropyltriethoxysilane 50% in methanol CAS No.: 116912-64-2  EINECS No.: 601-461-6 Formula: C10H24N2O4Si Typical Technical Data The values below are not intended for use in preparing specifications. Please confirm with us prior to writing specifications on this product. Appearance: Light yellow transparent liquid   Density(ρ20, g/cm3): 0.9200 ± 0.0050  Refractive Index(n25D): 1.3900 ± 0.0050  Purity: 98% Applications Silane OSi HIOSil 1160 provides superior elongation, flexibility, and spreading at the interface as a coupling agent.  Improve adhesion between glass, mineral, and metal surfaces and amino-reactive resins.  Improves adhesion while maintaining good shelf stability as an additive in waterborne systems

OSi HIOSil MEMMO CAS 14513-34-9 Chemical Name: 3-Methacryloxypropylmethyldimethoxysilane Synon , yms: 3-(Dimethoxymethylsilyl)propyl methacrylate  CAS NO.: 14513-34-9 EINECS No.: 238-518-6 Molecular Weight: 232.35 Typical Technical Data  The below values are not intended for use in preparing specifications. Please confirm with us prior to writing specifications on this product. Appearance: Colorless transparent liquid Specific Gravity (ρ20°C,g/cm3): 1.020~1.060 Refractive Index ( ): 1.4250~1.4350 Purity (by GC, %):  97.0 min Applications Silane OSi HIOSil MEMMO is a new type of coupling agent which can be used in applications including: Improves strength as glass fiber size composite in reinforced polyester composites. Enhances initial and wet strength of reinforced polyester resin composites, like synthetic marble. Enhances the wet electrical properties of many mineral-filled and reinforced composites.

OSi PEMS 57 CAS 70914-12-4 Product name: OSi PEMS 57 Other descriptions: Siloxanes and Silicones, di-Me, 3-hydroxypropyl Me, ethers with polyethylene glycol acetate CAS NO.:  70914-12-4  Product Description Product name: OSi PEMS 57 Other descriptions: Siloxanes and Silicones, di-Me, 3-hydroxypropyl Me, ethers with polyethylene glycol acetate CAS NO.:  70914-12-4 Silicon oil has many other unique properties and is used in a wide variety of applications. Click to learn more. Properties OSi PEMS 57 provides slip, gloss enhancement, pigment treatment, and leveling for ink and coatings applications, as well as mar resistance for coatings applications. Compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl systems. It does not cause contamination. 

Chemical Name: Di-tert-butoxydicaetoxysilane CAS No.: 13170-23-5 Typical Technical Data The values below are not intended for use in preparing specifications. Please confirm with us before writing specifications on this product. Appearance: Colorless to light yellow transparent liquid Purity (by GC, %): 90.0min Applications Silane OSi HIOSil BDAC is an adhesive promoter for acid-type RTV silicone rubber. It is always used with OSi HIOSil MTAS instead of the mixture of OSi HIOSil MTAS and OSi HIOSil ES 23 to avoid crystallizing. The mixture of Silane OSi HIOSil BDAC and OSi HIOSil MTAS will improve the performance of the RTV silicone rubber, such as tensile strength, bonding strength, and elongation. It can be applied for producing acid structural adhesive and large plate glass-rubber etc. We also can offer a mixture of OSi HIOSil BDAC and OSi HIOSil MTAS.

Name: 2-iodo-1-p-tolyl-propan-1-one Synonyms:

Minimum Order: 1 bags

Chemical name: Propanedioic acid, [(4-methoxyphenyl)-methylene]-dimethyl ester CAS No.: 7443-25-6 Molecular formula: C13H14O5 Molecular weight: 250 Molecular structure Specification Appearance: White to crystalline powder Assay, %: ≥99 Melting point，℃: 55-59℃ Loss on Drying, %: ≤0.5 Transmittance: 425nm≥95% 500nm≥96% Application UV ABSORBER UV PR-25 exhibits excellent absorbtion especially in the UVB-range. It is colorless and even in high concentration in the resin does not lead to any discoloration. It doesn’t form colored complexes with metal ions. Recommended for use in PVC, polyesters, PC, polyamides, styrene plastics, EVA copolymers, and cellulosics, particular in rigid PVC materials.  It can be also used in solventborne coatings and general industrial coatings where stabilization requirements remain moderate.It is particularly recommended for UV cured systems and clear coats where colour neutrality is essential. info at hhochem.com

Chemical name: PP carrier 50% Hindered Amine 2,2,6,6-tetramethyl-4-piperidinyl stearate CAS No.(HALS)：167078-06-0 CAS No.(PP): 9003-07-0 Molecular structure Specification Appearance: White granule powder Content, %: 47.5 – 52.5 Ash, %: ≤0.5 Melting point, ℃: ≥28 Saponification value, mgKOH/g: 128-137 Transmittance, % 425nm≥90 450nm≥95 Solubility Insoluble in water and toluene etc. Application LIGHT STABILIZER UV3853PP5 is s a hindered amine light stabilizer(HALS) in concentrate form which contains 50% active in PP carrier for general use in automotive and injection molding applications. It is also suitable for broad range of polymers and applications, including PP film/tape/injection molding applications, TPO, and PE film/tape/injection molding. It is also can be used for polyacetals, polyamides, styrenic polymers, and PUR. The end use of it include PP and TPO automotive parts, TPO roofing membranes, PE crates, and PP outdoor furniture. info at hhochem.com

Chemical name: 2,2,6,6-tetramethyl-4-piperidinyl stearate CAS No.：167078-06-0 Molecular formular: C27H53NO2 Molecular weight：423.7 Molecular structure Specification Appearance: White waxy solid Purity, %: ≥ 99 Melting point, ℃: ≥ 28 Ash, %: ≤0.5 Saponification value, mgKOH/g: 128-137 Transmittance, % 425nm≥90 450nm≥95 Solubility Not soluble in water; Soluble in methylbenzene and some other organic solvent Application LIGHT STABILIZER UV3853 is a new type of hindered amine light stabilizer, which protects the plastic from the damage of UV light. It has excellent stability to the surface of plastic such as luster, pulverization, yellowing. It has good compatibility, no phenomenon of bloom nor migration. It has excellent synergy with other stabilizer, especially with HALS and uv absorber of high molecular weight. It is used for polyolefin plastics, PU, ABS resin, paint, adhesives, rubber, etc. info at hhochem.com

Chemical name: 2-(2'-Hydroxy-5'-methylphenyl)benzotriazol , e CAS No.：2440-22-4 Molecular formula:C13H11N3O Molecular weight: 225.3 Molecular structure Specification Appearance: White to yellowish crystal powder Melting point，℃:128-132 Assay (HPLC), %: ≥99 Ash, %: ≤0.1 Volatility, %: ≤0.5 Light transmittance, %: 440nm≥94% 500nm≥97% Solubility (20℃, g/100ml solvent) Acetone:3 Benzene:7 Butyl Acetate:3 Carbitol:2 Chloroform:13 Ethanol:0.2 Ethyl Acetate:3.5 n-Hexane:0.8 Cyclohexane:1 Methanol:0.2 Methylene Chloride:16 MEK:4 Styrene:7 Toluene:6 Water ＜0.01 Application UV ABSORBER HOSORB-UVP is a benzotriazole type ultraviolet light absorber (UVA). The max absorbing wavelength range is 270-380nm. It is widely used in a variety of polymers including polypropylene polycarbonate, polyethylene, polyurethane, unsaturated resin, ABS resin, epoxy resin, PMMA, PVC, elastomer, adhesive etc. It almost does not absorb visible light, especially for colorless and transparent products. info at hhochem.com

Chemical name: 2,2’-(1,4-phenylene)bis-4H-3,1-benzoxazin-4-one< , br>CAS No.：18600-59-4 Molecular formular：C22H12N2O4 Molecular weight：368.34 Molecular structure Specification Appearance: White to off-white crystalline powder Melting point，℃：≥310 Assay, %: ≥98 Ash, %: ≤0.1 Loss on Drying: ≤0.5 Application UV ABSORBER HOSORB-UV3638 is a highly efficient benzoxazinone type UV absorber, which is distinguished by its superior low volatility and strong & broad range of UV light absorption together with no color contribution & excellent stabilization for polymers. It is designed to meet the demanding high temperature requirements for processing engineering plastics such as Nylon, PC,PET,PBT and PPO. It is also highly effective in other polymers such as polyamides, polyacetals, polyolefins fibers, styrenics, elastomers where long term UV light stability is required. info at hhochem.com

Chemical name: N-Hexadecyl-3, 5-di-tert-butyl-4-hydroxybenzoate CAS No.: 67845-93-6 Molecular formula:C31H54O3 Molecular weight: 475 Molecular structure Specification Appearance: White powder Purity (HPLC), %: ≥99 Melting point,℃: 59-63 Ash, %: ≤0.1 Loss on Drying, %: ≤0.5 Application UV absorber UV2908 belongs to the class of hindered hydroxybenzoate light stabilizer. It is widely used in polyolefins such as PP, PE, polycarbonate and the systems containing flame retardants and thioesters etc. It can be used alone or in combination with benzophenone UV stabilizer or phosphite antioxidant, showing good synergistic effect. info at hhochem.com

Chemical name: 2-(4,6-Diphenyl-1,3,5-triazin-2-yl)-5-[(hexyl)oxy] , -phenol CAS No.：147315-50-2 Molecular formular：C27H27N3O2 Molecular weight：425 Molecular structure Specification Appearance: Slightly yellow powder Melting point，℃：147.0-151.0 Assay by HPLC, %: ≥98.5 Ash, %: ≤0.1 Volatility, %: ≤0.5 Light transmittance, %: 450nm≥ 86.0 500nm≥98.0 Application UV ABSORBER HOSORB-UV1577 is triazine ultraviolet absorber. It is used in polyalkene terephthalate and naphthalates, linear and branched polycarbontes, modified polyphenylene ether compounds, and various high performance plastics. It is also used in PC, ABS, PBT, PA and copolymers as well as in reinforced, filled and/or flame retarded compounds. info at hhochem.com